Skip to content

Instantly share code, notes, and snippets.

@gelicia
Created November 20, 2017 02:48
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save gelicia/04ddb8232b974d1981d879befcd2717b to your computer and use it in GitHub Desktop.
Save gelicia/04ddb8232b974d1981d879befcd2717b to your computer and use it in GitHub Desktop.
Umbrastaff
#include <FastLED.h>
#define SENSOR_PIN 6
#define LED_PIN 3
#define NUM_LEDS 80
#define LED_TYPE WS2811
#define COLOR_ORDER RGB
CRGB leds[NUM_LEDS];
#define UPDATES_PER_SECOND 100
#define NUM_SEC 16
#define SEC_LEN 5
int mode = 0;
int storeSensorVal = 1;
uint8_t startIndex = 0;
CRGBPalette16 currentPalette;
extern CRGBPalette16 mySunsetPalette;
extern const TProgmemPalette16 mySunsetPalette_p PROGMEM;
int numModes = 7;
CRGBPalette16 modes[7] = { RainbowColors_p, PartyColors_p, CloudColors_p, OceanColors_p, ForestColors_p, LavaColors_p, mySunsetPalette_p };
void setup() {
Serial.begin(9600);
pinMode(SENSOR_PIN, INPUT);
delay( 3000 ); // power-up safety delay
FastLED.setMaxPowerInVoltsAndMilliamps(5, 1000);
FastLED.addLeds<LED_TYPE, LED_PIN, COLOR_ORDER>(leds, NUM_LEDS).setCorrection( TypicalLEDStrip );
}
void loop() {
int sensorVal = digitalRead(SENSOR_PIN);
if (sensorVal == 0 && storeSensorVal == 1) {
mode++;
if (mode == numModes) {
mode = 0;
}
}
storeSensorVal = sensorVal;
currentPalette = modes[mode];
static uint8_t startIndex = 0;
startIndex = startIndex + 1; /* motion speed */
FillLEDsFromPaletteColors(startIndex);
FastLED.show();
FastLED.delay(1000 / UPDATES_PER_SECOND);
}
void FillLEDsFromPaletteColors( uint8_t colorIndex)
{
uint8_t brightness = 255;
for ( int i = 0; i < NUM_LEDS; i++) {
int addr = (SEC_LEN * (i % NUM_SEC)) + (SEC_LEN - 1 - (floor(i/NUM_SEC)));
uint8_t idx = map(addr, 0, NUM_LEDS, 0, 255) + colorIndex;
leds[addr] = ColorFromPalette( currentPalette, idx, brightness, LINEARBLEND);
colorIndex += 3;
}
}
void lightSingleLED(int addr) {
//int newAddr = ((addr % SEC_LEN) * NUM_SEC) + (floor(addr/SEC_LEN));
int newAddr = (SEC_LEN * (addr % NUM_SEC)) + (SEC_LEN - 1 - (floor(addr/NUM_SEC))); //(((SEC_LEN - 1) - (addr % SEC_LEN)) * NUM_SEC) + floor(addr/SEC_LEN);
Serial.println(String(addr) + " " + String(newAddr));
for ( int i = 0; i < NUM_LEDS; i++) {
if (i == newAddr) {
leds[newAddr] = CRGB::Red;
}
else {
leds[i] = CRGB::Black;
}
}
}
const TProgmemPalette16 mySunsetPalette_p PROGMEM =
{
CRGB::Gray,
CRGB::Gray,
CRGB::Gray,
CRGB::Yellow,
CRGB::Gold,
CRGB::Goldenrod,
CRGB::Orange,
CRGB::Red,
CRGB::DarkRed,
CRGB::Maroon,
CRGB::Indigo,
CRGB::Purple,
CRGB::BlueViolet,
CRGB::MidnightBlue,
CRGB::RoyalBlue,
CRGB::Blue
};
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment