Created
October 25, 2011 17:38
-
-
Save anonymous/1313603 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) | |
| Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | |
| === START OF INFORMATION SECTION === | |
| Device Model: Hitachi HDS5C3030ALA630 | |
| Serial Number: MJ1311YNG2ZDDA | |
| Firmware Version: MEAOA5C0 | |
| User Capacity: 3.000.592.982.016 bytes | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: 8 | |
| ATA Standard is: ATA-8-ACS revision 4 | |
| Local Time is: Tue Oct 25 19:38:02 2011 CEST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x85) Offline data collection activity | |
| was aborted by an interrupting command from host. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 249) Self-test routine in progress... | |
| 90% of test remaining. | |
| Total time to complete Offline | |
| data collection: (37866) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 255) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 106 | |
| 3 Spin_Up_Time 0x0007 129 129 024 Pre-fail Always - 549 (Average 535) | |
| 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 34 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 32 | |
| 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 172 | |
| 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 34 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 35 | |
| 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 35 | |
| 194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Lifetime Min/Max 21/37) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 25 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 25 occurred at disk power-on lifetime: 120 hours (5 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 58 a8 ea 1c 01 Error: UNC 88 sectors at LBA = 0x011ceaa8 = 18672296 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 58 ea 1c e0 08 01:33:00.186 READ DMA EXT | |
| 27 00 00 00 00 00 e0 08 01:33:00.170 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 08 01:33:00.159 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 08 01:33:00.153 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 08 01:33:00.152 READ NATIVE MAX ADDRESS EXT | |
| Error 24 occurred at disk power-on lifetime: 120 hours (5 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 58 a8 ea 1c 01 Error: UNC 88 sectors at LBA = 0x011ceaa8 = 18672296 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 58 ea 1c e0 08 01:32:56.315 READ DMA EXT | |
| 27 00 00 00 00 00 e0 08 01:32:56.299 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 08 01:32:56.291 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 08 01:32:56.284 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 08 01:32:56.283 READ NATIVE MAX ADDRESS EXT | |
| Error 23 occurred at disk power-on lifetime: 120 hours (5 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 58 a8 ea 1c 01 Error: UNC 88 sectors at LBA = 0x011ceaa8 = 18672296 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 58 ea 1c e0 08 01:32:52.380 READ DMA EXT | |
| 27 00 00 00 00 00 e0 08 01:32:52.364 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 08 01:32:52.356 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 08 01:32:52.349 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 08 01:32:52.349 READ NATIVE MAX ADDRESS EXT | |
| Error 22 occurred at disk power-on lifetime: 120 hours (5 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 58 a8 ea 1c 01 Error: UNC 88 sectors at LBA = 0x011ceaa8 = 18672296 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 58 ea 1c e0 08 01:32:48.545 READ DMA EXT | |
| 27 00 00 00 00 00 e0 08 01:32:48.525 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 08 01:32:48.518 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 08 01:32:48.509 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 08 01:32:48.509 READ NATIVE MAX ADDRESS EXT | |
| Error 21 occurred at disk power-on lifetime: 120 hours (5 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 58 a8 ea 1c 01 Error: UNC 88 sectors at LBA = 0x011ceaa8 = 18672296 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 58 ea 1c e0 08 01:32:44.705 READ DMA EXT | |
| 27 00 00 00 00 00 e0 08 01:32:44.689 READ NATIVE MAX ADDRESS EXT | |
| ec 00 00 00 00 00 a0 08 01:32:44.680 IDENTIFY DEVICE | |
| ef 03 46 00 00 00 a0 08 01:32:44.673 SET FEATURES [Set transfer mode] | |
| 27 00 00 00 00 00 e0 08 01:32:44.672 READ NATIVE MAX ADDRESS EXT | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Aborted by host 90% 171 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment