Created
November 28, 2009 23:26
-
-
Save zunda/244702 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| --- smp.txt 2009-11-28 13:25:20.000000000 -1000 | |
| +++ up.txt 2009-11-28 13:24:27.000000000 -1000 | |
| @@ -20,15 +20,17 @@ | |
| last_pfn = 0x2ff80 max_arch_pfn = 0x100000000 | |
| x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 | |
| init_memory_mapping: 0000000000000000-000000002ff80000 | |
| + 0000000000 - 002fe00000 page 2M | |
| + 002fe00000 - 002ff80000 page 4k | |
| +kernel direct mapping tables up to 2ff80000 @ 10000-13000 | |
| last_map_addr: 2ff80000 end: 2ff80000 | |
| RAMDISK: 2fcbc000 - 2ff6f5e2 | |
| ACPI: RSDP 000FB520, 0014 (r0 ACPIAM) | |
| -ACPI: RSDT 2FF80000, 003C (r1 092109 RSDT1431 20090921 MSFT 97) | |
| +ACPI: RSDT 2FF80000, 0038 (r1 092109 RSDT1431 20090921 MSFT 97) | |
| ACPI: FACP 2FF80200, 0084 (r1 092109 FACP1431 20090921 MSFT 97) | |
| FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) | |
| ACPI: DSDT 2FF805D0, 733E (r1 A0901 A0901001 1 INTL 20051117) | |
| ACPI: FACS 2FF8E000, 0040 | |
| -ACPI: APIC 2FF80390, 007C (r1 092109 APIC1431 20090921 MSFT 97) | |
| ACPI: MCFG 2FF80410, 003C (r1 092109 OEMMCFG 20090921 MSFT 97) | |
| ACPI: OEMB 2FF8E040, 0071 (r1 092109 OEMB1431 20090921 MSFT 97) | |
| ACPI: HPET 2FF87910, 0038 (r1 092109 OEMHPET 20090921 MSFT 97) | |
| @@ -46,7 +48,7 @@ | |
| #3 [002fcbc000 - 002ff6f5e2] RAMDISK ==> [002fcbc000 - 002ff6f5e2] | |
| #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] | |
| #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] | |
| -found SMP MP-table at [ffff8800000ff780] 000ff780 | |
| + [ffffe20000000000-ffffe20000bfffff] PMD -> [ffff880001200000-ffff880001dfffff] on node 0 | |
| Zone PFN ranges: | |
| DMA 0x00000010 -> 0x00001000 | |
| DMA32 0x00001000 -> 0x00100000 | |
| @@ -55,49 +57,49 @@ | |
| early_node_map[2] active PFN ranges | |
| 0: 0x00000010 -> 0x0000009e | |
| 0: 0x00000100 -> 0x0002ff80 | |
| +On node 0 totalpages: 196366 | |
| + DMA zone: 56 pages used for memmap | |
| + DMA zone: 2446 pages reserved | |
| + DMA zone: 1480 pages, LIFO batch:0 | |
| + DMA32 zone: 2631 pages used for memmap | |
| + DMA32 zone: 189753 pages, LIFO batch:31 | |
| Detected use of extended apic ids on hypertransport bus | |
| ACPI: PM-Timer IO Port: 0x808 | |
| -ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) | |
| -ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) | |
| -ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) | |
| -ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) | |
| -ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) | |
| -ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) | |
| -ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) | |
| -IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 | |
| -ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| -ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) | |
| -Using ACPI (MADT) for SMP configuration information | |
| ACPI: HPET id: 0x8300 base: 0xfed00000 | |
| -SMP: Allowing 6 CPUs, 4 hotplug CPUs | |
| +SMP: Allowing 1 CPUs, 0 hotplug CPUs | |
| +nr_irqs_gsi: 16 | |
| PM: Registered nosave memory: 000000000009e000 - 000000000009f000 | |
| PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 | |
| PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 | |
| PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 | |
| Allocating PCI resources starting at 40000000 (gap: 30000000:cf700000) | |
| -NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1 | |
| +NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 | |
| PERCPU: Allocating 57344 bytes of per cpu data | |
| -Built 1 zonelists in Node order, mobility grouping on. Total pages: 191231 | |
| +Built 1 zonelists in Node order, mobility grouping on. Total pages: 191233 | |
| Policy zone: DMA32 | |
| Kernel command line: ro root=UUID=11e4e0e5-a1bd-4e1a-9503-b708c63691b6 rhgb quiet | |
| Initializing CPU#0 | |
| PID hash table entries: 4096 (order: 12, 32768 bytes) | |
| Fast TSC calibration using PIT | |
| -Detected 2204.701 MHz processor. | |
| +Detected 2205.023 MHz processor. | |
| Console: colour VGA+ 80x25 | |
| console [tty0] enabled | |
| allocated 7864320 bytes of page_cgroup | |
| please try cgroup_disable=memory option if you don't want | |
| Checking aperture... | |
| No AGP bridge found | |
| -Node 0: aperture @ c14000000 size 32 MB | |
| -Aperture beyond 4GB. Ignoring. | |
| -Memory: 752744k/785920k available (4148k kernel code, 456k absent, 32720k reserved, 2292k data, 1324k init) | |
| -SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
| +Node 0: aperture @ 34000000 size 32 MB | |
| +Aperture too small (32 MB) than (64 MB) | |
| +Memory: 753028k/785920k available (4148k kernel code, 456k absent, 32436k reserved, 2292k data, 1324k init) | |
| +SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| +hpet clockevent registered | |
| + alloc irq_desc for 16 on cpu 0 node 0 | |
| + alloc kstat_irqs on cpu 0 node 0 | |
| HPET: 4 timers in total, 1 timers will be used for per-cpu timer | |
| -Calibrating delay loop (skipped), value calculated using timer frequency.. 4409.40 BogoMIPS (lpj=2204701) | |
| +Calibrating delay loop (skipped), value calculated using timer frequency.. 4410.04 BogoMIPS (lpj=2205023) | |
| Security Framework initialized | |
| SELinux: Initializing. | |
| +SELinux: Starting in permissive mode | |
| Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) | |
| Mount-cache hash table entries: 256 | |
| @@ -110,41 +112,55 @@ | |
| CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) | |
| CPU: L2 Cache: 512K (64 bytes/line) | |
| CPU 0/0x0 -> Node 0 | |
| +tseg: 0000000000 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 0 | |
| using C1E aware idle routine | |
| +SMP alternatives: switching to UP code | |
| +Freeing SMP alternatives: 36k freed | |
| ACPI: Core revision 20081204 | |
| +ACPI: setting ELCR to 0200 (from 0c00) | |
| Setting APIC routing to flat | |
| -..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| -CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 | |
| -Booting processor 1 APIC 0x1 ip 0x6000 | |
| -Initializing CPU#1 | |
| -Calibrating delay using timer specific routine.. 4409.53 BogoMIPS (lpj=2204767) | |
| -CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) | |
| -CPU: L2 Cache: 512K (64 bytes/line) | |
| -CPU 1/0x1 -> Node 0 | |
| -CPU: Physical Processor ID: 0 | |
| -CPU: Processor Core ID: 1 | |
| -x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 | |
| -CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 | |
| -Brought up 2 CPUs | |
| -Total of 2 processors activated (8818.93 BogoMIPS). | |
| +weird, boot CPU (#0) not listed by the BIOS. | |
| +SMP motherboard not detected. | |
| +Setting APIC routing to flat | |
| +SMP disabled | |
| +Brought up 1 CPUs | |
| +Total of 1 processors activated (4410.04 BogoMIPS). | |
| +sizeof(vma)=176 bytes | |
| +sizeof(page)=56 bytes | |
| +sizeof(inode)=560 bytes | |
| +sizeof(dentry)=192 bytes | |
| +sizeof(ext3inode)=760 bytes | |
| +sizeof(buffer_head)=104 bytes | |
| +sizeof(skbuff)=232 bytes | |
| +sizeof(task_struct)=5800 bytes | |
| +CPU0 attaching NULL sched-domain. | |
| net_namespace: 1904 bytes | |
| Booting paravirtualized kernel on bare hardware | |
| regulator: core version 0.5 | |
| NET: Registered protocol family 16 | |
| +node 0 link 0: io port [1000, ffffff] | |
| TOM: 0000000040000000 aka 1024M | |
| +node 0 link 0: mmio [a0000, bffff] | |
| +node 0 link 0: mmio [40000000, cfffffff] | |
| +node 0 link 0: mmio [d0000000, efffffff] | |
| +node 0 link 0: mmio [f0000000, fbcfffff] | |
| +node 0 link 0: mmio [fbd00000, fbdfffff] | |
| +node 0 link 0: mmio [fbe00000, ffefffff] | |
| +bus: [00,07] on node 0 link 0 | |
| +bus: 00 index 0 io port: [0, ffff] | |
| +bus: 00 index 1 mmio: [a0000, bffff] | |
| +bus: 00 index 2 mmio: [40000000, fcffffffff] | |
| ACPI: bus type pci registered | |
| PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 | |
| PCI: Not using MMCONFIG. | |
| PCI: Using configuration type 1 for base access | |
| -mtrr: your CPUs had inconsistent fixed MTRR settings | |
| -mtrr: probably your BIOS does not setup all CPUs. | |
| -mtrr: corrected configuration. | |
| bio: create slab <bio-0> at 0 | |
| +ACPI: EC: Look up EC in DSDT | |
| ACPI: Interpreter enabled | |
| ACPI: (supports S0 S1 S3 S4 S5) | |
| -ACPI: Using IOAPIC for interrupt routing | |
| +ACPI: Using PIC for interrupt routing | |
| PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 | |
| PCI: MCFG area at e0000000 reserved in ACPI motherboard resources | |
| PCI: Using MMCONFIG at e0000000 - efffffff | |
| @@ -152,16 +168,57 @@ | |
| ACPI: PCI Root Bridge [PCI0] (0000:00) | |
| pci 0000:00:06.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:06.0: PME# disabled | |
| +pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007] | |
| +pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003] | |
| +pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007] | |
| +pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003] | |
| +pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f] | |
| +pci 0000:00:11.0: reg 24 32bit mmio: [0xfbcff800-0xfbcffbff] | |
| pci 0000:00:11.0: set SATA to AHCI mode | |
| +pci 0000:00:12.0: reg 10 32bit mmio: [0xfbcfe000-0xfbcfefff] | |
| +pci 0000:00:12.1: reg 10 32bit mmio: [0xfbcfd000-0xfbcfdfff] | |
| +pci 0000:00:12.2: reg 10 32bit mmio: [0xfbcff000-0xfbcff0ff] | |
| +pci 0000:00:12.2: supports D1 D2 | |
| pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot | |
| pci 0000:00:12.2: PME# disabled | |
| +pci 0000:00:13.0: reg 10 32bit mmio: [0xfbcfc000-0xfbcfcfff] | |
| +pci 0000:00:13.1: reg 10 32bit mmio: [0xfbcfb000-0xfbcfbfff] | |
| +pci 0000:00:13.2: reg 10 32bit mmio: [0xfbcfa800-0xfbcfa8ff] | |
| +pci 0000:00:13.2: supports D1 D2 | |
| pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot | |
| pci 0000:00:13.2: PME# disabled | |
| +pci 0000:00:14.1: reg 10 io port: [0x00-0x07] | |
| +pci 0000:00:14.1: reg 14 io port: [0x00-0x03] | |
| +pci 0000:00:14.1: reg 18 io port: [0x00-0x07] | |
| +pci 0000:00:14.1: reg 1c io port: [0x00-0x03] | |
| +pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] | |
| +pci 0000:00:14.2: reg 10 64bit mmio: [0xfbcf4000-0xfbcf7fff] | |
| pci 0000:00:14.2: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:14.2: PME# disabled | |
| +pci 0000:00:14.5: reg 10 32bit mmio: [0xfbcf9000-0xfbcf9fff] | |
| +pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] | |
| +pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff] | |
| +pci 0000:01:05.0: reg 18 32bit mmio: [0xfbef0000-0xfbefffff] | |
| +pci 0000:01:05.0: reg 24 32bit mmio: [0xfbd00000-0xfbdfffff] | |
| +pci 0000:01:05.0: supports D1 D2 | |
| +pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] | |
| +pci 0000:00:01.0: bridge 32bit mmio: [0xfbd00000-0xfbefffff] | |
| +pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] | |
| +pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff] | |
| +pci 0000:02:00.0: reg 18 64bit mmio: [0xfbfff000-0xfbffffff] | |
| +pci 0000:02:00.0: reg 20 64bit mmio: [0xfaff0000-0xfaffffff] | |
| +pci 0000:02:00.0: reg 30 32bit mmio: [0xfbfc0000-0xfbfdffff] | |
| +pci 0000:02:00.0: supports D1 D2 | |
| pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| pci 0000:02:00.0: PME# disabled | |
| +pci 0000:00:06.0: bridge io port: [0xe000-0xefff] | |
| +pci 0000:00:06.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] | |
| +pci 0000:00:06.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] | |
| pci 0000:00:14.4: transparent bridge | |
| +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] | |
| +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] | |
| +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] | |
| +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] | |
| ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) | |
| @@ -172,6 +229,7 @@ | |
| ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. | |
| ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 6D, should be 60 [20081204] | |
| SCSI subsystem initialized | |
| +libata version 3.00 loaded. | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| @@ -180,8 +238,9 @@ | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 | |
| NetLabel: unlabeled traffic allowed by default | |
| -hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 | |
| +hpet0: at MMIO 0xfed00000, IRQs 2, 8, 16, 0 | |
| hpet0: 4 comparators, 32-bit 14.318180 MHz counter | |
| +hpet: hpet2 irq 16 for MSI | |
| pnp: PnP ACPI init | |
| ACPI: bus type pnp registered | |
| pnp: PnP ACPI: found 16 devices | |
| @@ -234,7 +293,25 @@ | |
| pci 0000:00:14.4: IO window: disabled | |
| pci 0000:00:14.4: MEM window: disabled | |
| pci 0000:00:14.4: PREFETCH window: disabled | |
| -pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 | |
| +ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 | |
| +PCI: setting IRQ 10 as level-triggered | |
| +pci 0000:00:06.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 | |
| +pci 0000:00:06.0: setting latency timer to 64 | |
| +pci_bus 0000:00: resource 0 io: [0x00-0xffff] | |
| +pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] | |
| +pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] | |
| +pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbefffff] | |
| +pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff] | |
| +pci_bus 0000:01: resource 3 mem: [0x0-0x0] | |
| +pci_bus 0000:02: resource 0 io: [0xe000-0xefff] | |
| +pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] | |
| +pci_bus 0000:02: resource 2 mem: [0xfaf00000-0xfaffffff] | |
| +pci_bus 0000:02: resource 3 mem: [0x0-0x0] | |
| +pci_bus 0000:03: resource 0 mem: [0x0-0x0] | |
| +pci_bus 0000:03: resource 1 mem: [0x0-0x0] | |
| +pci_bus 0000:03: resource 2 mem: [0x0-0x0] | |
| +pci_bus 0000:03: resource 3 io: [0x00-0xffff] | |
| +pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 32768 (order: 6, 262144 bytes) | |
| TCP established hash table entries: 131072 (order: 9, 2097152 bytes) | |
| @@ -245,18 +322,25 @@ | |
| checking if image is initramfs... it is | |
| Freeing initrd memory: 2765k freed | |
| audit: initializing netlink socket (disabled) | |
| -type=2000 audit(1255493530.503:1): initialized | |
| +type=2000 audit(1259449932.456:1): initialized | |
| HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| VFS: Disk quotas dquot_6.5.2 | |
| Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| Loading Reiser4. See www.namesys.com for a description of Reiser4. | |
| -msgmni has been set to 1475 | |
| +msgmni has been set to 1476 | |
| +SELinux: Registering netfilter hooks | |
| alg: No test for stdrng (krng) | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) | |
| io scheduler noop registered | |
| io scheduler anticipatory registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| +Switched to high resolution mode on CPU 0 | |
| +pci 0000:01:05.0: Boot video device | |
| +pcieport-driver 0000:00:06.0: setting latency timer to 64 | |
| + alloc irq_desc for 17 on cpu 0 node 0 | |
| + alloc kstat_irqs on cpu 0 node 0 | |
| +pcieport-driver 0000:00:06.0: irq 17 for MSI/MSI-X | |
| pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
| pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | |
| acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| @@ -266,10 +350,10 @@ | |
| ACPI: Power Button (CM) [PWRB] | |
| processor ACPI_CPU:00: registered as cooling_device0 | |
| ACPI: Processor [P001] (supports 8 throttling states) | |
| -processor ACPI_CPU:01: registered as cooling_device1 | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| +spurious 8259A interrupt: IRQ7. | |
| serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| brd: module loaded | |
| @@ -278,17 +362,20 @@ | |
| input: Macintosh mouse button emulation as /devices/virtual/input/input2 | |
| Driver 'sd' needs updating - please use bus_type methods | |
| Driver 'sr' needs updating - please use bus_type methods | |
| -ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 | |
| +ahci 0000:00:11.0: version 3.0 | |
| +ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 | |
| +PCI: setting IRQ 11 as level-triggered | |
| +ahci 0000:00:11.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 | |
| ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode | |
| ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part | |
| scsi0 : ahci | |
| scsi1 : ahci | |
| scsi2 : ahci | |
| scsi3 : ahci | |
| -ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22 | |
| -ata2: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcff980 irq 22 | |
| -ata3: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa00 irq 22 | |
| -ata4: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa80 irq 22 | |
| +ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 11 | |
| +ata2: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcff980 irq 11 | |
| +ata3: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa00 irq 11 | |
| +ata4: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa80 irq 11 | |
| ata1: softreset failed (device not ready) | |
| ata1: failed due to HW bug, retry pmp=0 | |
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
| @@ -298,11 +385,13 @@ | |
| scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 | |
| sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| +sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| +sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| -sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > | |
| + sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > | |
| sd 0:0:0:0: [sda] Attached SCSI disk | |
| sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
| ata2: SATA link down (SStatus 0 SControl 300) | |
| @@ -315,15 +404,17 @@ | |
| scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5 | |
| sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray | |
| Uniform CD-ROM driver Revision: 3.20 | |
| +sr 2:0:0:0: Attached scsi CD-ROM sr0 | |
| sr 2:0:0:0: Attached scsi generic sg1 type 5 | |
| ata4: SATA link down (SStatus 0 SControl 300) | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| -ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 | |
| +ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 | |
| +ehci_hcd 0000:00:12.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 | |
| ehci_hcd 0000:00:12.2: EHCI Host Controller | |
| ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 | |
| ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround | |
| ehci_hcd 0000:00:12.2: debug port 1 | |
| -ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff000 | |
| +ehci_hcd 0000:00:12.2: irq 11, io mem 0xfbcff000 | |
| ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| @@ -333,12 +424,13 @@ | |
| usb usb1: configuration #1 chosen from 1 choice | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 6 ports detected | |
| -ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 | |
| +ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 | |
| +ehci_hcd 0000:00:13.2: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 | |
| ehci_hcd 0000:00:13.2: EHCI Host Controller | |
| ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 | |
| ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround | |
| ehci_hcd 0000:00:13.2: debug port 1 | |
| -ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfa800 | |
| +ehci_hcd 0000:00:13.2: irq 10, io mem 0xfbcfa800 | |
| ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| @@ -349,10 +441,11 @@ | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 6 ports detected | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| -ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| +ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 | |
| +ohci_hcd 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 | |
| ohci_hcd 0000:00:12.0: OHCI Host Controller | |
| ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 | |
| -ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfe000 | |
| +ohci_hcd 0000:00:12.0: irq 10, io mem 0xfbcfe000 | |
| usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb3: Product: OHCI Host Controller | |
| @@ -361,10 +454,10 @@ | |
| usb usb3: configuration #1 chosen from 1 choice | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 3 ports detected | |
| -ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 | |
| +ohci_hcd 0000:00:12.1: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 | |
| ohci_hcd 0000:00:12.1: OHCI Host Controller | |
| ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 | |
| -ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfd000 | |
| +ohci_hcd 0000:00:12.1: irq 10, io mem 0xfbcfd000 | |
| usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb4: Product: OHCI Host Controller | |
| @@ -373,10 +466,10 @@ | |
| usb usb4: configuration #1 chosen from 1 choice | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: 3 ports detected | |
| -ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 | |
| +ohci_hcd 0000:00:13.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 | |
| ohci_hcd 0000:00:13.0: OHCI Host Controller | |
| ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 | |
| -ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000 | |
| +ohci_hcd 0000:00:13.0: irq 10, io mem 0xfbcfc000 | |
| usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb5: Product: OHCI Host Controller | |
| @@ -385,10 +478,10 @@ | |
| usb usb5: configuration #1 chosen from 1 choice | |
| hub 5-0:1.0: USB hub found | |
| hub 5-0:1.0: 3 ports detected | |
| -ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 | |
| +ohci_hcd 0000:00:13.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 | |
| ohci_hcd 0000:00:13.1: OHCI Host Controller | |
| ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 | |
| -ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfb000 | |
| +ohci_hcd 0000:00:13.1: irq 10, io mem 0xfbcfb000 | |
| usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb6: Product: OHCI Host Controller | |
| @@ -397,10 +490,10 @@ | |
| usb usb6: configuration #1 chosen from 1 choice | |
| hub 6-0:1.0: USB hub found | |
| hub 6-0:1.0: 3 ports detected | |
| -ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 | |
| +ohci_hcd 0000:00:14.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 | |
| ohci_hcd 0000:00:14.5: OHCI Host Controller | |
| ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 | |
| -ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcf9000 | |
| +ohci_hcd 0000:00:14.5: irq 10, io mem 0xfbcf9000 | |
| usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb7: Product: OHCI Host Controller | |
| @@ -433,13 +526,15 @@ | |
| TCP cubic registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 17 | |
| +IO APIC resources could be not be allocated. | |
| registered taskstats version 1 | |
| Initalizing network drop monitor service | |
| Freeing unused kernel memory: 1324k freed | |
| input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 | |
| usb 4-2: new low speed USB device using ohci_hcd and address 2 | |
| [drm] Initialized drm 1.1.0 20060810 | |
| -radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 | |
| +radeon 0000:01:05.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 | |
| +radeon 0000:01:05.0: setting latency timer to 64 | |
| [drm] Initialized radeon 1.30.0 20080528 for 0000:01:05.0 on minor 0 | |
| usb 4-2: New USB device found, idVendor=046d, idProduct=c501 | |
| usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment