NetBSD 5.0_STABLE (KUROBOX_PRO) boot message on LS-HGL

Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
  Device 0: OK
Model: Hitachi HDP725050GLA360                  Firm: GM4OA5CA Ser#:       GEA534RV10
BJEA
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)

Using device ide0, partition 1

Loading from block device ide device 0, partition 1: Name: hda1
  Type: U-Boot  File:/uImage.buffalo

4189104 bytes read
## Booting image at 00100000 ...
   Image Name:   NetBSD 5.0_STABLE (KUROBOX_PRO)
   Created:      2009-12-29   1:14:20 UTC
   Image Type:   ARM NetBSD Kernel Image (uncompressed)
   Data Size:    4189040 Bytes =  4 MB
   Load Address: 00008000
   Entry Point:  00800000
   Verifying Checksum ... OK
OK
## Transferring control to NetBSD stage-2 loader (at address 00008000) ...

NetBSD/evbarm (orion_nas) booting ...
Loaded initial symtab at 0xc03876f8, strtab at 0xc03ba990, # entries 13008
pmap_postinit: Allocated 35 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
NetBSD 5.0_STABLE (KUROBOX_PRO) #0: Tue Dec 29 10:13:46 JST 2009
        root@:/opt/usr/src/sys/arch/evbarm/compile/obj/KUROBOX_PRO
total memory = 128 MB
avail memory = 120 MB
mainbus0 (root)
cpu0 at mainbus0: ARM926EJ-S rev 0 (ARM9EJ-S core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 32KB/32B 1-way Instruction cache
cpu0: 32KB/32B 1-way write-back-locking-C Data cache
mvsoc0 at mainbus0: Marvell MV88F5082 SoC Rev. A0 Orion1
mvsoc0: CPU Clock 400.000 MHz  SysClock 200.000 MHz  TClock 166.664 MHz
oriontmr0 at mvsoc0 addr 0xf1020300-0xf10203ff: Marvell Orion Timer
oriongpp0 at mvsoc0 addr 0xf1010100-0xf10101ff: Marvell Orion General Purpose I/O Por
t Interface
oriongpp0:   Data Out:                  0x00000002
oriongpp0:   Data Out Enable Control:   0xff82bdfc
oriongpp0:   Data Blink Enable:         0x00000001
oriongpp0:   Data In Polarity:          0x00008782
oriongpp0:   Data In:                   0x0082033c
oriongpp0:   Data Interrupt Cause:      0x00000001
oriongpp0:   Data Interrupt Mask:       0x00000000
oriongpp0:   Data Interrupt Level Mask: 0x00000000
gpio0 at oriongpp0: 32 pins
com0 at mvsoc0 addr 0xf1012000-0xf101201f irq 3: ns16550a, working fifo
com0: console
com1 at mvsoc0 addr 0xf1012100-0xf101211f irq 4: ns16550a, working fifo
mvsata0 at mvsoc0 irq 29: Marvell Serial-ATA Host Controller (SATAHC)
mvsata0: GenIIe, 1hc, 1port/hc
atabus0 at mvsata0 channel 0
ehci0 at mvsoc0 addr 0xf1050000-0xf1051fff irq 17: Marvell Orion USB 2.0 Interface
usb0 at ehci0: USB revision 2.0
ehci1 at mvsoc0 addr 0xf10a0000-0xf10a1fff irq 12: Marvell Orion USB 2.0 Interface
usb1 at ehci1: USB revision 2.0
mvgbe0 at mvsoc0 irq 21: Marvell Gigabit Ethernet Controller
mvgbe0: Ethernet address 00:1d:73:9d:cb:96
makphy0 at mvgbe0 phy 8: Marvell 88E1116 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mvtwsi0 at mvsoc0 irq 5: Marvell TWSI controller
iic0 at mvtwsi0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
mvpex0 at mvsoc0 addr 0xf1040000-0xf1041fff irq 11: Marvell PCI Express Interface
pci0 at mvpex0
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci0 dev 0 function 0 not configured
mvcesa0 at mvsoc0 addr 0xf1090000-0xf109ffff irq 28: Marvell Cryptographic Engines and Security Accelerator
mvidmac0 at mvsoc0 addr 0xf1060800-0xf1060bff: Marvell IDMA Controller
uhub0 at usb0: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1 at usb1: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
mvsata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0: <Hitachi HDP725050GLA360>
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Searching for RAID components...
boot device: <unknown>
root on wd0a dumps on wd0b
WARNING: clock gained 4419 days
WARNING: CHECK AND RESET THE DATE!
init: copying out path `/sbin/init' 11
Thu Feb  3 13:28:24 JST 2022
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
kern.no_sa_support: 0 -> 1
ddb.onpanic: 1 -> 0
Starting network.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Starting dhclient.
Internet Systems Consortium DHCP Client V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

Listening on BPF/mvgbe0/00:1d:73:9d:cb:96
Sending on   BPF/mvgbe0/00:1d:73:9d:cb:96
Sending on   Socket/fallback
DHCPDISCOVER on mvgbe0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on mvgbe0 to 255.255.255.255 port 67 interval 5
ip length 328 disagrees with bytes received 332.
accepting packet with data after udp payload.
DHCPOFFER from XXX.XXX.XXX.XXX
DHCPREQUEST on mvgbe0 to 255.255.255.255 port 67
ip length 328 disagrees with bytes received 332.
accepting packet with data after udp payload.
DHCPACK from XXX.XXX.XXX.XXX

bound to YYY.YYY.YYY.YYY -- renewal in 1691 seconds.
Building databases: dev, utmp, utmpx done
Starting syslogd.
Checking for core dump...
savecore: (null): kvm_openfiles: /netbsd: No such file or directory
Feb  3 13:28:38  savecore: (null): kvm_openfiles: /netbsd: No such file or directory
Mounting all filesystems...
Clearing temporary files.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db)
newaliases: warning: valid_hostname: empty hostname
newaliases: fatal: unable to use my own hostname
Feb  3 13:28:43  postfix/sendmail[270]: fatal: unable to use my own hostname
Starting inetd.
Starting cron.
Thu Feb  3 13:28:43 JST 2022

NetBSD/evbarm (Amnesiac) (console)
  
login: