Skip to content

Instantly share code, notes, and snippets.

@goldmann

goldmann/gist:88780

Created April 1, 2009 16:53
Show Gist options
  • Save goldmann/88780 to your computer and use it in GitHub Desktop.
Save goldmann/88780 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
Linux version 2.6.16-xenU (builder@xenbat.amazonsa) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000006a400000 (usable)
980MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
IRQ lockup detection disabled
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro 4
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Xen reported: 2599.998 MHz processor.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f53fe000, maxmem 2d7fe000
Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5201.79 BogoMIPS (lpj=26008985)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Checking 'hlt' instruction... OK.
Brought up 1 CPUs
migration_cost=0
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
xen_mem: Initialising balloon driver.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
Registering block device major 8
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freed
***************************************************************
***************************************************************
** WARNING: Currently emulating unsupported memory accesses **
** in /lib/tls glibc libraries. The emulation is **
** slow. To ensure full performance you should **
** install a 'xen-friendly' (nosegneg) version of **
** the library, or disable tls support by executing **
** the following as root: **
** mv /lib/tls /lib/tls.disabled **
** Offending process: init (pid=1) **
***************************************************************
***************************************************************
Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing...
Welcome to JBoss-Cloud
Press 'I' to enter interactive startup.
Starting udev: [ OK ]
Setting hostname localhost.localdomain: [ OK ]
Setting up Logical Volume Management: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 33391/83424 files, 245390/333056 blocks
[/sbin/fsck.ext3 (1) -- /mnt] fsck.ext3 -a /dev/sda2
ext2fs_check_if_mount: No such file or directory while determining whether /dev/sda2 is mounted.
/dev/sda2: Adding dirhash hint to filesystem.
/dev/sda2: clean, 11/19546112 files, 661385/39088128 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: swapon: /proc/swaps: unexpected file format
[ OK ]
Entering non-interactive startup
open-vm-tools (2009.03.18): Installing module.
Kernel source for 2.6.16-xenU not installed. Cannot install this module.
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... done.
[ OK ]
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
Starting system logger: [ OK ]
Starting system message bus: [ OK ]
Mounting other filesystems: [ OK ]
Generating SSH1 RSA host key: [ OK ]
Generating SSH2 RSA host key: [ OK ]
Generating SSH2 DSA host key: [ OK ]
Starting sshd: [ OK ]
Starting exim: [ OK ]
Starting vmware-guestd: FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file or directory
mount: mount point /proc/fs/vmblock/mountPoint does not exist
The VMware service must be run from within a virtual machine.
[ OK ]
Starting crond: [ OK ][ OK ]
Installing appliance jboss-as5-applianceInstalling appliance back-end-appliance
[60G [
[1;31m FAILED
[0;39m]
Starting jboss-as5:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0130 391 130 391 0 0 16271 0 --:--:-- --:--:-- --:--:-- 30076
Updating ec2-ami-tools
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0100 163k 100 163k 0 0 3589k 0 --:--:-- --:--:-- --:--:-- 4541k
Preparing... (100%)# (100%)## (100%)### (100%)#### (100%)##### (100%)###### (100%)####### (100%)######## (100%)######### (100%)########## (100%)########### (100%)############ (100%)############# (100%)############## (100%)############### (100%)################ (100%)################# (100%)################## (100%)################### (100%)#################### (100%)##################### (100%)###################### (100%)####################### (100%)######################## (100%)######################### (100%)########################## (100%)########################### (100%)############################ (100%)############################# (100%)############################## (100%)############################### (100%)################################ (100%)################################# (100%)################################## (100%)################################### (100%)#################################### (100%)##################################### (100%)###################################### (100%)####################################### (100%)######################################## (100%)######################################### (100%)########################################## (100%)########################################### (100%)########################################### [100%]
1:ec2-ami-tools ( 2%)# ( 4%)## ( 7%)### ( 9%)#### ( 11%)##### ( 13%)###### ( 15%)####### ( 19%)######## ( 20%)######### ( 23%)########## ( 24%)########### ( 26%)############ ( 29%)############# ( 31%)############## ( 33%)############### ( 36%)################ ( 38%)################# ( 40%)################## ( 42%)################### ( 45%)#################### ( 48%)##################### ( 49%)###################### ( 52%)####################### ( 54%)######################## ( 56%)######################### ( 58%)########################## ( 61%)########################### ( 64%)############################ ( 66%)############################# ( 68%)############################## ( 69%)############################### ( 72%)################################ ( 74%)################################# ( 78%)################################## ( 80%)################################### ( 82%)#################################### ( 85%)##################################### ( 86%)###################################### ( 88%)####################################### ( 90%)######################################## ( 93%)######################################### ( 95%)########################################## ( 97%)########################################### ( 99%)########################################### [100%]
+ Updated ec2-ami-tools
c
------------------------------------
- Name: JBoss-Cloud back-end appliance
- Hostname: domU-12-31-39-00-E5-03.compute-1.internal
- IP Address: 10.254.234.241
- Version: 1.0.0.Beta3-1
------------------------------------
domU-12-31-39-00-E5-03 login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment