Created
September 15, 2019 13:17
-
-
Save 0312birdzhang/d4e723a43ddd5742f6222547ed6071db to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
09-15 21:16:06.901 4493 4542 D audio_hw_primary: start_output_stream: enter: stream(0x23ec48)usecase(0: deep-buffer-playback) devices(0x2) | |
09-15 21:16:06.901 4493 4542 D audio_hw_primary: select_devices for use case (deep-buffer-playback) | |
09-15 21:16:06.901 4493 4542 V msm8916_platform: platform_get_native_support:napb: ui Prop enabled(0) version(0) | |
09-15 21:16:06.901 2869 3093 E ANDR-PERF-MPCTL: Invalid profile no. 0, total profiles 0 only | |
09-15 21:16:06.901 4493 4542 V msm8916_platform: platform_get_output_snd_device: enter: output devices(0x2) | |
09-15 21:16:06.901 4493 4542 V msm8916_platform: platform_get_output_snd_device: exit: snd_device(speaker) | |
09-15 21:16:06.901 4493 4542 D audio_hw_primary: select_devices: out_snd_device(2: speaker) in_snd_device(0: ) | |
09-15 21:16:06.901 4493 4542 V msm8916_platform: platform_get_backend_index:napb: backend port - 0 device - 2 | |
09-15 21:16:06.901 4493 4542 I msm8916_platform: platform_check_and_set_codec_backend_cfg:becf: afe: bitwidth 16, samplerate 48000 channels 2, backend_idx 0 usecase = 0 device (speaker) | |
09-15 21:16:06.902 4493 4542 D msm8916_platform: platform_can_split_snd_device: snd_device(2) num devices(1) new_snd_devices(-446698660) | |
09-15 21:16:06.902 4493 4542 I msm8916_platform: platform_check_and_set_codec_backend_cfg: becf: new_snd_devices[0] is speaker | |
09-15 21:16:06.902 4493 4542 V msm8916_platform: platform_get_native_support:napb: ui Prop enabled(0) version(0) | |
09-15 21:16:06.902 4493 4542 V msm8916_platform: platform_get_backend_index:napb: backend port - 0 device - 2 | |
09-15 21:16:06.902 4493 4542 I msm8916_platform: platform_check_codec_backend_cfg:becf: afe: Codec selected backend: 0 current bit width: 16 sample rate: 48000 channels: 2 | |
09-15 21:16:06.902 4493 4542 V msm8916_platform: platform_get_native_support:napb: ui Prop enabled(0) version(0) | |
09-15 21:16:06.902 4493 4542 D msm8916_platform: platform_check_codec_backend_cfg:becf: afe: playback on non-44.1-support device Configure afe to default Sample Rate(48k) | |
09-15 21:16:06.902 4493 4542 D msm8916_platform: platform_check_codec_backend_cfg:becf: afe: only 48KHZ sample rate is supported Configure afe to default Sample Rate(48k) | |
09-15 21:16:06.902 4493 4542 W msm8916_platform: platform_check_codec_backend_cfg:becf: afe:only 16bit is support for speaker | |
09-15 21:16:06.902 4493 4542 I msm8916_platform: platform_check_codec_backend_cfg:becf: afe: Codec selected backend: 0 updated bit width: 16 and sample rate: 48000 | |
09-15 21:16:06.902 4493 4542 D audio_hw_primary: check_usecases_codec_backend:becf: force routing 0 | |
09-15 21:16:06.902 4493 4542 V msm8916_platform: platform_check_backends_match: snd_device1 = speaker, snd_device2 = | |
09-15 21:16:06.902 4493 4542 E msm8916_platform: platform_check_backends_match: Invalid snd_device = | |
09-15 21:16:06.902 4493 4542 D audio_hw_primary: check_usecases_codec_backend:becf: (40) check_usecases curr device: speaker, usecase device: backends match 0 | |
09-15 21:16:06.902 4493 4542 D audio_hw_primary: check_usecases_codec_backend:becf: check_usecases num.of Usecases to switch 0 | |
09-15 21:16:06.902 4493 4542 D hardware_info: hw_info_append_hw_type : device_name = speaker | |
09-15 21:16:06.902 4493 4542 E audio_hw_primary: start_dsm_feedback_process: pcm device id 38 | |
09-15 21:16:06.902 4493 4542 E audio_hw_primary: start_dsm_feedback_process: cannot open device '/dev/snd/pcmC0D38c': 没有那个文件或目录 | |
09-15 21:16:06.902 4493 4542 D msm8916_platform: platform_can_split_snd_device: snd_device(2) num devices(0) new_snd_devices(0) | |
09-15 21:16:06.902 4493 4542 D audio_hw_primary: enable_snd_device: snd_device(2: speaker) | |
09-15 21:16:06.902 4493 4542 I soundtrigger: audio_extn_sound_trigger_update_device_status: device 0x2 of type 0 for Event 1, with Raise=0 | |
09-15 21:16:06.902 4493 4542 D audio_route: Apply path: speaker | |
09-15 21:16:06.902 4493 4542 I audio_hw_primary: select_devices Selected apptype: 69936 | |
09-15 21:16:06.902 4493 4542 E audio_hw_dolby: audio_extn_dolby_ds2_set_endpoint: dap_hal_set_hw_info is NULL | |
09-15 21:16:06.902 4493 4542 D soundtrigger: audio_extn_sound_trigger_update_stream_status: uc_id 0 of type 0 for Event 3, with Raise=1 | |
09-15 21:16:06.903 4493 4542 I audio_hw_utils: audio_extn_utils_send_app_type_cfg PLAYBACK app_type = 69936, acdb_dev_id = 1058, sample_rate = 48000 | |
09-15 21:16:06.903 4493 4542 D msm8916_platform: platform_can_split_snd_device: snd_device(2) num devices(1) new_snd_devices(-446698880) | |
09-15 21:16:06.903 4493 4542 V msm8916_platform: platform_send_audio_calibration: sending audio calibration for snd_device(2) acdb_id(1058) | |
09-15 21:16:06.903 4493 4542 D ACDB-LOADER: ACDB -> send_audio_cal, acdb_id = 1058, path = 0, app id = 0x11130, sample rate = 48000 | |
09-15 21:16:06.903 4493 4542 D ACDB-LOADER: ACDB -> send_asm_topology | |
09-15 21:16:06.903 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TOPOLOGY_ID | |
09-15 21:16:06.903 4493 4542 D ACDB-LOADER: ACDB -> send_adm_topology | |
09-15 21:16:06.903 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TOPOLOGY_ID | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> send_audtable | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE_SIZE | |
09-15 21:16:06.904 4493 4542 D : ACDBFILE_MGR:Read the devices count as zero, please check the acdb file | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE | |
09-15 21:16:06.904 4493 4542 D : ACDBFILE_MGR:Read the devices count as zero, please check the acdb file | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> AUDIO_SET_AUDPROC_CAL | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> send_audvoltable | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_VOL_STEP_TABLE_SIZE | |
09-15 21:16:06.904 4493 4542 D : ACDBFILE_MGR:Read the devices count as zero, please check the acdb file | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_GAIN_DEP_STEP_TABLE, vol index 0 | |
09-15 21:16:06.904 4493 4542 D : ACDBFILE_MGR:Read the devices count as zero, please check the acdb file | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> AUDIO_SET_VOL_CAL cal type = 12 | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TABLE_SIZE | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> send_audstrmtable | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TABLE_V2 | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> audstrm_cal->cal_type.cal_data.cal_size = 16 | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> send_afe_topology | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AFE_TOPOLOGY_ID | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> GET_AFE_TOPOLOGY_ID for adcd_id 1058, Topology Id 10001060 | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> send_afe_cal | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AFE_COMMON_TABLE_SIZE | |
09-15 21:16:06.904 4493 4542 D : ACDBFILE_MGR:Read the devices count as zero, please check the acdb file | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_CMD_GET_AFE_COMMON_TABLE | |
09-15 21:16:06.904 4493 4542 D : ACDBFILE_MGR:Read the devices count as zero, please check the acdb file | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> AUDIO_SET_AFE_CAL 1052 1052 | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> load_dsm_calib_data fp is null error[没有那个文件或目录] | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> AUDIO_SET_AFE_CAL | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> send_hw_delay : acdb_id = 1058 path = 0 | |
09-15 21:16:06.904 4493 4542 D ACDB-LOADER: ACDB -> ACDB_AVSYNC_INFO: ACDB_CMD_GET_DEVICE_PROPERTY | |
09-15 21:16:06.904 4493 4542 D audio_hw_primary: enable_audio_route: apply mixer and update path: deep-buffer-playback speaker,snd_device[2] | |
09-15 21:16:06.904 4493 4542 D audio_route: Apply path: deep-buffer-playback speaker | |
09-15 21:16:06.905 4493 4542 D audio_hw_primary: select_devices: done | |
09-15 21:16:06.909 4493 4542 V msm8916_platform: platform_set_channel_map channel_count:2 | |
09-15 21:16:06.909 4493 4542 D msm8916_platform: platform_set_channel_map mixer_ctl_name:Playback Channel Map0 | |
09-15 21:16:06.910 4493 4542 D msm8916_platform: platform_set_channel_map: set mapping(1 2 0 0 0 0 0 0) for channel:2 | |
09-15 21:16:06.945 4493 4542 D audio_hw_primary: start_output_stream: exit | |
09-15 21:16:07.071 29851 31562 E : No matching decoder! (mime: video/avc) | |
09-15 21:16:07.071 29851 31562 E DroidMediaCodec: Failed to create codec | |
09-15 21:16:07.076 29851 31567 I OMXClient: Treble IOmx obtained | |
09-15 21:16:07.077 2923 21836 I OMXMaster: makeComponentInstance(OMX.google.aac.decoder) in omx@1.0-service process | |
09-15 21:16:07.080 29851 31563 I : Successfully allocated codec 'OMX.google.aac.decoder' | |
09-15 21:16:07.085 2842 2842 W /system/bin/hw/android.hidl.allocator@1.0-service: ashmem_create_region(8192) returning hidl_memory(0x7d5742c470, 8192) | |
09-15 21:16:07.091 2842 2842 I chatty : uid=1000(system) allocator@1.0-s identical 2 lines | |
09-15 21:16:07.092 2842 2842 W /system/bin/hw/android.hidl.allocator@1.0-service: ashmem_create_region(8192) returning hidl_memory(0x7d5742c470, 8192) | |
09-15 21:16:07.094 2842 2842 W /system/bin/hw/android.hidl.allocator@1.0-service: ashmem_create_region(32768) returning hidl_memory(0x7d5742c470, 32768) | |
09-15 21:16:07.095 2842 2842 I chatty : uid=1000(system) allocator@1.0-s identical 2 lines | |
09-15 21:16:07.096 2842 2842 W /system/bin/hw/android.hidl.allocator@1.0-service: ashmem_create_region(32768) returning hidl_memory(0x7d5742c470, 32768) | |
09-15 21:16:07.605 29851 31571 D : [OMX.google.aac.decoder] did not produce an output buffer. retry count: 1 | |
09-15 21:16:07.607 2923 31569 I SoftAAC2: Reconfiguring decoder: 0->48000 Hz, 0->2 channels | |
09-15 21:16:07.607 29851 31571 I DroidMediaCodec: retry reading again. error: 0x3d | |
09-15 21:16:07.607 29851 29851 E DroidMediaCodec: error 0x16 stopping codec | |
09-15 21:16:07.611 29851 29851 W MediaAnalyticsItem: Unable to record: (codec:0:-1:-11:0:6:android.media.mediacodec.codec=OMX.google.aac.decoder:android.media.mediacodec.mode=audio:android.media.mediacodec.secure=0:android.media.mediacodec.profile=2:android.media.mediacodec.mime=audio/mp4a-latm:android.media.mediacodec.bytesin=343:) [forcenew=0] | |
09-15 21:16:08.055 31576 31576 D QC-time-services: Daemon:genoff_pre_init::Base = 0 | |
09-15 21:16:08.055 31576 31576 E QC-time-services: Daemon:ats_rtc_init: Unable to open RTC device | |
09-15 21:16:08.055 31576 31576 E QC-time-services: Daemon:genoff_init_config: RTC initilization failed | |
09-15 21:16:08.055 31576 31576 E QC-time-services: Daemon: Unable to initialize bases, exiting | |
09-15 21:16:08.082 4493 4542 D audio_hw_primary: out_standby: enter: stream (0x23ec48) usecase(0: deep-buffer-playback) | |
09-15 21:16:08.241 4493 4542 D audio_hw_primary: disable_audio_route: reset and update mixer path: deep-buffer-playback speaker | |
09-15 21:16:08.244 4493 4542 D soundtrigger: audio_extn_sound_trigger_update_stream_status: uc_id 0 of type 0 for Event 2, with Raise=1 | |
09-15 21:16:08.244 4493 4542 D hardware_info: hw_info_append_hw_type : device_name = speaker | |
09-15 21:16:08.244 4493 4542 D audio_hw_primary: disable_snd_device: snd_device(2: speaker) | |
09-15 21:16:08.244 4493 4542 D msm8916_platform: platform_can_split_snd_device: snd_device(2) num devices(0) new_snd_devices(0) | |
09-15 21:16:08.244 4493 4542 I soundtrigger: audio_extn_sound_trigger_update_device_status: device 0x2 of type 0 for Event 0, with Raise=0 | |
09-15 21:16:08.244 4493 4542 D audio_hw_primary: out_standby: exit |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment