Skip to content

Instantly share code, notes, and snippets.

@sakal
Created June 23, 2012 17:59
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 1 You must be signed in to fork a gist
  • Save sakal/2979235 to your computer and use it in GitHub Desktop.
Save sakal/2979235 to your computer and use it in GitHub Desktop.
sakal@sakal:~$ xrandr -q
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 8192 x 8192
VGA-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+ 59.9
1920x1200 60.0
1680x1050 60.0 59.9
1600x1200 60.0
1440x900 59.9
1400x1050 60.0
1360x768 60.0 59.8
1280x1024 60.0
1280x960 60.0
1280x800 59.8
1152x864 60.0
1024x768 60.0
960x600 120.0
960x540 120.0
840x525 120.0 119.8
800x600 60.3 56.2
720x450 119.8
700x525 120.0
680x384 119.9 119.6
640x480 59.9
512x384 120.0
320x240 120.1
DVI-I-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 295.49 (pbuilder@cake) Wed May 9 09:59:42 UTC 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"# 0 0
Screen 1 "Screen1"# RightOf "Screen0"
Screen 2 "Screen2"# RightOf "Screen1"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
#Option "Xinerama" "0"
EndSection
Section "Module"
Load "extmod"
Load "glx"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor2"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
[ 10081.353]
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[ 10081.353] X Protocol Version 11, Revision 0
[ 10081.353] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
[ 10081.353] Current Operating System: Linux sakal 3.2.0-2-amd64 #1 SMP Mon Jun 11 17:24:18 UTC 2012 x86_64
[ 10081.353] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/sakal-root ro quiet
[ 10081.353] Build Date: 20 May 2012 08:57:17AM
[ 10081.353] xorg-server 2:1.12.1.902-1 (Cyril Brulebois <kibi@debian.org>)
[ 10081.353] Current version of pixman: 0.26.0
[ 10081.353] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10081.353] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10081.354] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 23 21:51:58 2012
[ 10081.354] (==) Using config file: "/etc/X11/xorg.conf"
[ 10081.354] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10081.354] (==) ServerLayout "Layout0"
[ 10081.354] (**) |-->Screen "Screen0" (0)
[ 10081.354] (**) | |-->Monitor "Monitor0"
[ 10081.354] (**) | |-->Device "Device0"
[ 10081.354] (**) |-->Screen "Screen1" (1)
[ 10081.354] (**) | |-->Monitor "Monitor1"
[ 10081.354] (**) | |-->Device "Device1"
[ 10081.354] (**) |-->Screen "Screen2" (2)
[ 10081.354] (**) | |-->Monitor "Monitor2"
[ 10081.354] (**) | |-->Device "Device2"
[ 10081.354] (**) |-->Input Device "Keyboard0"
[ 10081.354] (**) |-->Input Device "Mouse0"
[ 10081.354] (==) Automatically adding devices
[ 10081.354] (==) Automatically enabling devices
[ 10081.354] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 10081.354] Entry deleted from font path.
[ 10081.354] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 10081.354] Entry deleted from font path.
[ 10081.354] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 10081.354] Entry deleted from font path.
[ 10081.354] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 10081.354] Entry deleted from font path.
[ 10081.354] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 10081.354] Entry deleted from font path.
[ 10081.354] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 10081.354] Entry deleted from font path.
[ 10081.354] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 10081.354] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10081.354] (**) Extension "Composite" is disabled
[ 10081.354] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10081.354] (WW) Disabling Keyboard0
[ 10081.354] (WW) Disabling Mouse0
[ 10081.354] (II) Loader magic: 0x7f2541199ae0
[ 10081.354] (II) Module ABI versions:
[ 10081.354] X.Org ANSI C Emulation: 0.4
[ 10081.354] X.Org Video Driver: 12.0
[ 10081.354] X.Org XInput driver : 16.0
[ 10081.354] X.Org Server Extension : 6.0
[ 10081.355] (--) PCI:*(0:1:0:0) 10de:0622:10b0:0401 rev 161, Mem @ 0xfa000000/16777216, 0xc0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 10081.355] (--) PCI: (0:2:0:0) 10de:0622:10b0:0401 rev 161, Mem @ 0xf6000000/16777216, 0xb0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 10081.355] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10081.355] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 10081.355] (II) "dbe" will be loaded by default.
[ 10081.355] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 10081.355] (II) "record" will be loaded by default.
[ 10081.355] (II) "dri" will be loaded by default.
[ 10081.355] (II) "dri2" will be loaded by default.
[ 10081.355] (II) LoadModule: "extmod"
[ 10081.355] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 10081.355] (II) Module extmod: vendor="X.Org Foundation"
[ 10081.355] compiled for 1.12.1.902, module version = 1.0.0
[ 10081.355] Module class: X.Org Server Extension
[ 10081.355] ABI class: X.Org Server Extension, version 6.0
[ 10081.355] (II) Loading extension SELinux
[ 10081.355] (II) Loading extension MIT-SCREEN-SAVER
[ 10081.355] (II) Loading extension XFree86-VidModeExtension
[ 10081.355] (II) Loading extension XFree86-DGA
[ 10081.355] (II) Loading extension DPMS
[ 10081.355] (II) Loading extension XVideo
[ 10081.355] (II) Loading extension XVideo-MotionCompensation
[ 10081.355] (II) Loading extension X-Resource
[ 10081.355] (II) LoadModule: "glx"
[ 10081.355] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 10081.361] (II) Module glx: vendor="NVIDIA Corporation"
[ 10081.361] compiled for 4.0.2, module version = 1.0.0
[ 10081.361] Module class: X.Org Server Extension
[ 10081.361] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
[ 10081.361] (II) Loading extension GLX
[ 10081.361] (II) LoadModule: "dbe"
[ 10081.361] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 10081.361] (II) Module dbe: vendor="X.Org Foundation"
[ 10081.361] compiled for 1.12.1.902, module version = 1.0.0
[ 10081.361] Module class: X.Org Server Extension
[ 10081.361] ABI class: X.Org Server Extension, version 6.0
[ 10081.361] (II) Loading extension DOUBLE-BUFFER
[ 10081.361] (II) LoadModule: "record"
[ 10081.361] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 10081.362] (II) Module record: vendor="X.Org Foundation"
[ 10081.362] compiled for 1.12.1.902, module version = 1.13.0
[ 10081.362] Module class: X.Org Server Extension
[ 10081.362] ABI class: X.Org Server Extension, version 6.0
[ 10081.362] (II) Loading extension RECORD
[ 10081.362] (II) LoadModule: "dri"
[ 10081.362] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 10081.362] (II) Module dri: vendor="X.Org Foundation"
[ 10081.362] compiled for 1.12.1.902, module version = 1.0.0
[ 10081.362] ABI class: X.Org Server Extension, version 6.0
[ 10081.362] (II) Loading extension XFree86-DRI
[ 10081.362] (II) LoadModule: "dri2"
[ 10081.362] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 10081.362] (II) Module dri2: vendor="X.Org Foundation"
[ 10081.362] compiled for 1.12.1.902, module version = 1.2.0
[ 10081.362] ABI class: X.Org Server Extension, version 6.0
[ 10081.362] (II) Loading extension DRI2
[ 10081.362] (II) LoadModule: "nvidia"
[ 10081.362] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 10081.362] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 10081.362] compiled for 4.0.2, module version = 1.0.0
[ 10081.362] Module class: X.Org Video Driver
[ 10081.362] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
[ 10081.362] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 10081.362] (++) using VT number 8
[ 10081.369] (II) Loading sub module "fb"
[ 10081.369] (II) LoadModule: "fb"
[ 10081.369] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10081.369] (II) Module fb: vendor="X.Org Foundation"
[ 10081.369] compiled for 1.12.1.902, module version = 1.0.0
[ 10081.369] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10081.369] (II) Loading sub module "wfb"
[ 10081.369] (II) LoadModule: "wfb"
[ 10081.369] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 10081.369] (II) Module wfb: vendor="X.Org Foundation"
[ 10081.369] compiled for 1.12.1.902, module version = 1.0.0
[ 10081.369] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10081.369] (II) Loading sub module "ramdac"
[ 10081.369] (II) LoadModule: "ramdac"
[ 10081.369] (II) Module "ramdac" already built-in
[ 10081.369] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 10081.369] (==) NVIDIA(0): RGB weight 888
[ 10081.369] (==) NVIDIA(0): Default visual is TrueColor
[ 10081.369] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10081.369] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
[ 10081.369] (**) NVIDIA(1): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
[ 10081.369] (**) NVIDIA(0): Enabling 2D acceleration
[ 10082.406] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 10082.406] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10082.490] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 10082.490] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10082.491] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 10082.491] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 10082.491] (--) NVIDIA(0): VideoBIOS: 62.94.84.00.00
[ 10082.491] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 10082.491] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 10082.492] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[ 10082.492] (--) NVIDIA(0): Samsung SyncMaster (CRT-0) (connected)
[ 10082.492] (--) NVIDIA(0): CRT-1
[ 10082.492] (--) NVIDIA(0): Samsung SyncMaster (DFP-0) (connected)
[ 10082.492] (--) NVIDIA(0): DFP-1
[ 10082.492] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 10082.492] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 10082.492] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 10082.492] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 10082.492] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 10082.492] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 10082.492] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10082.492] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 10082.492] (**) NVIDIA(0): has been enabled on all display devices.)
[ 10082.497] (II) NVIDIA(0): Validated modes:
[ 10082.497] (II) NVIDIA(0): "CRT:nvidia-auto-select+0+0"
[ 10082.497] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 10082.527] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 10082.527] (--) NVIDIA(0): option
[ 10082.527] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 10082.527] (==) NVIDIA(1): RGB weight 888
[ 10082.527] (==) NVIDIA(1): Default visual is TrueColor
[ 10082.527] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 10082.527] (II) NVIDIA(1): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 10082.527] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 10082.527] (--) NVIDIA(1): VideoBIOS: 62.94.84.00.00
[ 10082.527] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 10082.527] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 10082.528] (--) NVIDIA(1): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[ 10082.528] (--) NVIDIA(1): Samsung SyncMaster (CRT-0) (connected)
[ 10082.528] (--) NVIDIA(1): CRT-1
[ 10082.528] (--) NVIDIA(1): Samsung SyncMaster (DFP-0) (connected)
[ 10082.528] (--) NVIDIA(1): DFP-1
[ 10082.528] (--) NVIDIA(1): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 10082.528] (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
[ 10082.528] (--) NVIDIA(1): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 10082.528] (--) NVIDIA(1): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 10082.528] (--) NVIDIA(1): DFP-1: 165.0 MHz maximum pixel clock
[ 10082.528] (--) NVIDIA(1): DFP-1: Internal Single Link TMDS
[ 10082.528] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10082.528] (**) NVIDIA(1): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 10082.528] (**) NVIDIA(1): has been enabled on all display devices.)
[ 10082.529] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10082.529] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 10082.529] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10082.529] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10082.529] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 10082.529] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10082.529] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 10082.529] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10082.529] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10082.529] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 10082.529] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10082.529] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 10082.529] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10082.529] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10082.529] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 10082.530] (II) NVIDIA(1): Validated modes:
[ 10082.530] (II) NVIDIA(1): "DFP:nvidia-auto-select+0+0"
[ 10082.530] (II) NVIDIA(1): Virtual screen size determined to be 1920 x 1080
[ 10082.532] (--) NVIDIA(1): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 10082.532] (--) NVIDIA(1): option
[ 10082.532] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
[ 10082.532] (==) NVIDIA(2): RGB weight 888
[ 10082.532] (==) NVIDIA(2): Default visual is TrueColor
[ 10082.532] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
[ 10082.532] (**) NVIDIA(2): Option "MetaModes" "nvidia-auto-select +0+0"
[ 10082.532] (**) NVIDIA(2): Enabling 2D acceleration
[ 10083.690] (II) NVIDIA(GPU-1): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 10083.690] (II) NVIDIA(GPU-1): 3D Vision stereo.
[ 10083.692] (II) NVIDIA(2): NVIDIA GPU GeForce 9600 GT (G94) at PCI:2:0:0 (GPU-1)
[ 10083.692] (--) NVIDIA(2): Memory: 1048576 kBytes
[ 10083.692] (--) NVIDIA(2): VideoBIOS: 62.94.84.00.00
[ 10083.692] (II) NVIDIA(2): Detected PCI Express Link width: 16X
[ 10083.692] (--) NVIDIA(2): Interlaced video modes are supported on this GPU
[ 10083.694] (--) NVIDIA(2): Valid display device(s) on GeForce 9600 GT at PCI:2:0:0
[ 10083.694] (--) NVIDIA(2): CRT-0
[ 10083.694] (--) NVIDIA(2): CRT-1
[ 10083.694] (--) NVIDIA(2): Samsung SyncMaster (DFP-0) (connected)
[ 10083.694] (--) NVIDIA(2): DFP-1
[ 10083.694] (--) NVIDIA(2): CRT-0: 400.0 MHz maximum pixel clock
[ 10083.694] (--) NVIDIA(2): CRT-1: 400.0 MHz maximum pixel clock
[ 10083.694] (--) NVIDIA(2): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 10083.694] (--) NVIDIA(2): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 10083.694] (--) NVIDIA(2): DFP-1: 165.0 MHz maximum pixel clock
[ 10083.694] (--) NVIDIA(2): DFP-1: Internal Single Link TMDS
[ 10083.694] (**) NVIDIA(2): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10083.694] (**) NVIDIA(2): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 10083.694] (**) NVIDIA(2): has been enabled on all display devices.)
[ 10083.694] (WW) NVIDIA(GPU-1): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10083.694] (WW) NVIDIA(GPU-1): mode "1920x1080" is specified in the EDID; however, the
[ 10083.694] (WW) NVIDIA(GPU-1): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10083.694] (WW) NVIDIA(GPU-1): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10083.694] (WW) NVIDIA(GPU-1): VertRefresh check for mode "1920x1080".
[ 10083.694] (WW) NVIDIA(GPU-1): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10083.694] (WW) NVIDIA(GPU-1): mode "1280x720" is specified in the EDID; however, the
[ 10083.694] (WW) NVIDIA(GPU-1): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10083.694] (WW) NVIDIA(GPU-1): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10083.694] (WW) NVIDIA(GPU-1): VertRefresh check for mode "1280x720".
[ 10083.695] (WW) NVIDIA(GPU-1): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10083.695] (WW) NVIDIA(GPU-1): mode "720x576" is specified in the EDID; however, the
[ 10083.695] (WW) NVIDIA(GPU-1): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10083.695] (WW) NVIDIA(GPU-1): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10083.695] (WW) NVIDIA(GPU-1): VertRefresh check for mode "720x576".
[ 10083.697] (II) NVIDIA(2): Validated modes:
[ 10083.697] (II) NVIDIA(2): "nvidia-auto-select+0+0"
[ 10083.697] (II) NVIDIA(2): Virtual screen size determined to be 1920 x 1080
[ 10083.699] (--) NVIDIA(2): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 10083.699] (--) NVIDIA(2): option
[ 10083.699] (--) Depth 24 pixmap format is 32 bpp
[ 10083.699] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 10083.704] (II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+0+0"
[ 10083.736] (II) Loading extension NV-GLX
[ 10083.748] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 10083.748] (==) NVIDIA(0): Backing store disabled
[ 10083.748] (==) NVIDIA(0): Silken mouse enabled
[ 10083.749] (**) NVIDIA(0): DPMS enabled
[ 10083.749] (II) Loading extension NV-CONTROL
[ 10083.749] (WW) NVIDIA(0): Option "TwinView" is not used
[ 10083.749] (II) Loading sub module "dri2"
[ 10083.749] (II) LoadModule: "dri2"
[ 10083.749] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 10083.749] (II) Module dri2: vendor="X.Org Foundation"
[ 10083.749] compiled for 1.12.1.902, module version = 1.2.0
[ 10083.749] ABI class: X.Org Server Extension, version 6.0
[ 10083.749] (II) NVIDIA(0): [DRI2] Setup complete
[ 10083.749] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 10083.749] (--) RandR disabled
[ 10083.752] (II) NVIDIA(1): Setting mode "DFP:nvidia-auto-select+0+0"
[ 10083.910] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 10083.910] (==) NVIDIA(1): Backing store disabled
[ 10083.910] (==) NVIDIA(1): Silken mouse enabled
[ 10083.911] (**) NVIDIA(1): DPMS enabled
[ 10083.911] (WW) NVIDIA(1): Option "TwinView" is not used
[ 10083.911] (II) Loading sub module "dri2"
[ 10083.911] (II) LoadModule: "dri2"
[ 10083.911] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 10083.911] (II) Module dri2: vendor="X.Org Foundation"
[ 10083.911] compiled for 1.12.1.902, module version = 1.2.0
[ 10083.911] ABI class: X.Org Server Extension, version 6.0
[ 10083.911] (II) NVIDIA(1): [DRI2] Setup complete
[ 10083.911] (II) NVIDIA(1): [DRI2] VDPAU driver: nvidia
[ 10083.911] (--) RandR disabled
[ 10083.917] (II) NVIDIA(2): Setting mode "nvidia-auto-select+0+0"
[ 10083.960] (==) NVIDIA(2): Disabling shared memory pixmaps
[ 10083.960] (==) NVIDIA(2): Backing store disabled
[ 10083.960] (==) NVIDIA(2): Silken mouse enabled
[ 10083.960] (**) NVIDIA(2): DPMS enabled
[ 10083.960] (WW) NVIDIA(2): Option "TwinView" is not used
[ 10083.960] (II) Loading sub module "dri2"
[ 10083.960] (II) LoadModule: "dri2"
[ 10083.961] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 10083.961] (II) Module dri2: vendor="X.Org Foundation"
[ 10083.961] compiled for 1.12.1.902, module version = 1.2.0
[ 10083.961] ABI class: X.Org Server Extension, version 6.0
[ 10083.961] (II) NVIDIA(2): [DRI2] Setup complete
[ 10083.961] (II) NVIDIA(2): [DRI2] VDPAU driver: nvidia
[ 10083.961] (--) RandR disabled
[ 10083.961] (II) Initializing built-in extension Generic Event Extension
[ 10083.961] (II) Initializing built-in extension SHAPE
[ 10083.961] (II) Initializing built-in extension MIT-SHM
[ 10083.961] (II) Initializing built-in extension XInputExtension
[ 10083.961] (II) Initializing built-in extension XTEST
[ 10083.961] (II) Initializing built-in extension BIG-REQUESTS
[ 10083.961] (II) Initializing built-in extension SYNC
[ 10083.961] (II) Initializing built-in extension XKEYBOARD
[ 10083.961] (II) Initializing built-in extension XC-MISC
[ 10083.961] (II) Initializing built-in extension SECURITY
[ 10083.961] (II) Initializing built-in extension XINERAMA
[ 10083.961] (II) Initializing built-in extension XFIXES
[ 10083.961] (II) Initializing built-in extension RENDER
[ 10083.961] (II) Initializing built-in extension RANDR
[ 10083.961] (II) Initializing built-in extension COMPOSITE
[ 10083.961] (II) Initializing built-in extension DAMAGE
[ 10083.961] (II) SELinux: Disabled on system
[ 10083.961] (II) Initializing extension GLX
[ 10083.988] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 10083.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10083.988] (II) LoadModule: "evdev"
[ 10083.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10083.989] (II) Module evdev: vendor="X.Org Foundation"
[ 10083.989] compiled for 1.12.1, module version = 2.7.0
[ 10083.989] Module class: X.Org XInput Driver
[ 10083.989] ABI class: X.Org XInput driver, version 16.0
[ 10083.989] (II) Using input driver 'evdev' for 'Power Button'
[ 10083.989] (**) Power Button: always reports core events
[ 10083.989] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 10083.989] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10083.989] (--) evdev: Power Button: Found keys
[ 10083.989] (II) evdev: Power Button: Configuring as keyboard
[ 10083.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 10083.989] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10083.989] (**) Option "xkb_rules" "evdev"
[ 10083.989] (**) Option "xkb_model" "pc105"
[ 10083.989] (**) Option "xkb_layout" "us,ru"
[ 10083.989] (**) Option "xkb_variant" ","
[ 10083.989] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll"
[ 10084.003] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10084.003] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10084.003] (II) Using input driver 'evdev' for 'Power Button'
[ 10084.003] (**) Power Button: always reports core events
[ 10084.003] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10084.003] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10084.003] (--) evdev: Power Button: Found keys
[ 10084.003] (II) evdev: Power Button: Configuring as keyboard
[ 10084.003] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 10084.003] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10084.003] (**) Option "xkb_rules" "evdev"
[ 10084.003] (**) Option "xkb_model" "pc105"
[ 10084.003] (**) Option "xkb_layout" "us,ru"
[ 10084.003] (**) Option "xkb_variant" ","
[ 10084.003] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll"
[ 10084.003] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 10084.003] (II) No input driver specified, ignoring this device.
[ 10084.003] (II) This device may have been added with another device file.
[ 10084.004] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event0)
[ 10084.004] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10084.004] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 10084.004] (**) Logitech Logitech USB Keyboard: always reports core events
[ 10084.004] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event0"
[ 10084.004] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc315
[ 10084.004] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 10084.004] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 10084.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input0/event0"
[ 10084.004] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 10084.004] (**) Option "xkb_rules" "evdev"
[ 10084.004] (**) Option "xkb_model" "pc105"
[ 10084.004] (**) Option "xkb_layout" "us,ru"
[ 10084.004] (**) Option "xkb_variant" ","
[ 10084.004] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll"
[ 10084.004] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 10084.004] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10084.004] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 10084.004] (**) Eee PC WMI hotkeys: always reports core events
[ 10084.004] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event4"
[ 10084.004] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 10084.004] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 10084.004] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 10084.004] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[ 10084.004] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 9)
[ 10084.004] (**) Option "xkb_rules" "evdev"
[ 10084.004] (**) Option "xkb_model" "pc105"
[ 10084.004] (**) Option "xkb_layout" "us,ru"
[ 10084.004] (**) Option "xkb_variant" ","
[ 10084.004] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll"
[ 10084.004] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event5)
[ 10084.004] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 10084.004] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 10084.004] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 10084.004] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
[ 10084.004] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 10084.004] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 10084.004] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 10084.004] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 10084.004] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 10084.004] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 10084.004] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 10084.004] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 10084.004] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10084.004] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 10084.005] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 10)
[ 10084.005] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 10084.005] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 10084.005] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 10084.005] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 10084.005] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 10084.005] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 10084.005] (II) No input driver specified, ignoring this device.
[ 10084.005] (II) This device may have been added with another device file.
[ 10084.005] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 10084.005] (II) No input driver specified, ignoring this device.
[ 10084.005] (II) This device may have been added with another device file.
[ 10104.141] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 10104.141] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10104.141] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10104.141] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 10104.141] (**) NVIDIA(0): has been enabled on all display devices.)
[ 10104.233] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 10104.233] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10104.233] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10104.233] (**) NVIDIA(1): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 10104.233] (**) NVIDIA(1): has been enabled on all display devices.)
[ 10104.233] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10104.233] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 10104.233] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10104.233] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10104.233] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 10104.233] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10104.233] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 10104.233] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10104.233] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10104.233] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 10104.233] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10104.233] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 10104.233] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10104.233] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10104.233] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 10127.318] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 10127.318] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10127.318] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10127.318] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 10127.318] (**) NVIDIA(0): has been enabled on all display devices.)
[ 10127.409] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 10127.409] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 10127.409] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10127.409] (**) NVIDIA(1): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 10127.409] (**) NVIDIA(1): has been enabled on all display devices.)
[ 10127.409] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10127.409] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 10127.409] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10127.409] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10127.409] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 10127.409] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10127.409] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 10127.409] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10127.409] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10127.409] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 10127.409] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 10127.409] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 10127.409] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-60.000 Hz) would
[ 10127.409] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 10127.409] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment