2shrestha22

#!/bin/bash
# To run this:
# bash <(curl -sL https://gist.githubusercontent.com/2shrestha22/b2f15066c1627085e0913ac52d243d62/raw/2c477da35d44b77a510783a1d1494cc90feb9217/magisk_flash.sh)

BOOT_IMAGE_FILE_NAME="boot.img"
BOOT_IMAGE_FILE_PATH="./$BOOT_IMAGE_FILE_NAME"

echo -e "Helper srcipt to flash Magisk patched boot.img for non A/B device...\n"

if adb shell getprop ro.build.ab_update | grep -q true; then

linrunner

TLP 1.4 Test: Battery Care for Lenovo Laptops (non-ThinkPad series)

Read the overview document first.

Supported Features

Lenovo laptop series using the ideapad_laptop driver have a feature called 'battery conservation mode', basically a fixed stop charge threshold at 60%. The hardware behaviour is:

1. Connected to the charger, charging stops when the charge level reaches the stop threshold

andrebrait

Here is the best setup (I think so :D) for K-series Keychron keyboards on Linux.

Note: many newer Keychron keyboards use QMK as firmware and most tips here do not apply to them. Maybe the ones related to Bluetooth can be useful, but everything related to Apple's keyboard module (hid_apple) on Linux, won't work. As far as I know, all QMK-based boards use the hid_generic module instead. Examples of QMK-based boards are: Q, Q-Pro, V, K-Pro, etc.

Most of these commands have been tested on Ubuntu 20.04 and should also work on most Debian-based distributions. If a command happens not to work for you, take a look in the comment section.

Make Fn + F-keys work (NOT FOR QMK-BASED BOARDS)

Older Keychron keyboards (those not based on QMK) use the hid_apple driver on Linux, even in the Windows/Android mode, both in Bluetooth and Wired modes.

pierremonico

[Desktop Entry]
Encoding=UTF-8
Name=Postman
Exec=postman
Icon=/opt/Postman/resources/app/assets/icon.png
Terminal=false
Type=Application
Categories=Development;

joepie91

Read this first!

Hi there! Since this post was originally written, nvm has gained some new tools, and some people have suggested alternative (and potentially better) approaches for modern systems. Make sure to have a look at the comments to this article, before following this guide!

---

The original article

Trickier than it seems.

zhiguangwang

Installing and running shadowsocks on Ubuntu Server

16.10 yakkety and above

1. Install the the shadowsocks-libev package from apt repository.

    sudo apt update
    sudo apt install shadowsocks-libev
   

2. Save ss.json as /etc/shadowsocks-libev/config.json.