gistfile1.txt

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.27+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #160 PREEMPT Mon Sep 17 23:18:42 BST 2012
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 49152
[    0.000000] free_area_init_node: node 0, pgdat c050d508, node_mem_map c05b5000
[    0.000000]   Normal zone: 384 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 48768 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 48768
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708.boardrev=0x2 bcm2708.serial=0x7c40eff8 smsc95xx.macaddr=B8:27:EB:40:EF:F8 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 192MB = 192MB total
[    0.000000] Memory: 188980k/188980k available, 7628k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xcc800000 - 0xe8000000   ( 440 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xcc000000   ( 192 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04c1ec8   (4840 kB)
[    0.000000]       .init : 0xc04c2000 - 0xc04e1930   ( 127 kB)
[    0.000000]       .data : 0xc04e2000 - 0xc050dba0   ( 175 kB)
[    0.000000]        .bss : 0xc050dbc4 - 0xc05b4ae8   ( 668 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] timer_set_mode: unhandled mode:1
[    0.000000] timer_set_mode: unhandled mode:3
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000956] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060156] pid_max: default: 32768 minimum: 301
[    0.060636] Mount-cache hash table entries: 512
[    0.061133] Initializing cgroup subsys cpuacct
[    0.061226] Initializing cgroup subsys devices
[    0.061264] Initializing cgroup subsys freezer
[    0.061295] Initializing cgroup subsys blkio
[    0.061437] CPU: Testing write buffer coherency: ok
[    0.061785] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.063012] devtmpfs: initialized
[    0.073216] NET: Registered protocol family 16
[    0.074895] vc_mem_connected_init: called
[    0.074977] bcm2708_vcio: bcm_mailbox_property failed (-19)
[    0.075020] vc_mem_update: success=-19 resp 0, vcbase=0 vcsize=0 armbase=0 armsize=0
[    0.075066] vc-mem: mm_vc_mem_phys_addr = 0x00000000
[    0.075096] vc-mem: mm_vc_mem_size      = 0x00000000 (0 MiB)
[    0.075578] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.075631] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.075669] mailbox: Broadcom VideoCore Mailbox driver
[    0.075761] bcm2708_vcio: mailbox at f200b880
[    0.075852] bcm_power: Broadcom power driver
[    0.075890] bcm_power_open() -> 0
[    0.075915] bcm_power_request(0, 8)
[    0.576598] bcm_mailbox_read -> 00000080, 0
[    0.576637] bcm_power_request -> 0
[    0.576663] Serial: AMBA PL011 UART driver
[    0.576819] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.902968] console [ttyAMA0] enabled
[    0.927791] bio: create slab <bio-0> at 0
[    0.932965] SCSI subsystem initialized
[    0.937065] usbcore: registered new interface driver usbfs
[    0.942687] usbcore: registered new interface driver hub
[    0.948315] usbcore: registered new device driver usb
[    0.954255] Switching to clocksource stc
[    0.958600] FS-Cache: Loaded
[    0.961778] CacheFiles: Loaded
[    0.978004] NET: Registered protocol family 2
[    0.982930] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.991017] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.998537] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    1.005186] TCP: Hash tables configured (established 8192 bind 8192)
[    1.011599] TCP reno registered
[    1.014766] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.020675] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.027465] NET: Registered protocol family 1
[    1.032662] RPC: Registered named UNIX socket transport module.
[    1.038798] RPC: Registered udp transport module.
[    1.043523] RPC: Registered tcp transport module.
[    1.048237] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.054994] bcm2708_dma: DMA manager at cc808000
[    1.059771] bcm2708_gpio: bcm2708_gpio_probe c04e9c18
[    1.065214] vc-mem: Videocore memory driver
[    1.070236] audit: initializing netlink socket (disabled)
[    1.075725] type=2000 audit(0.740:1): initialized
[    1.193183] VFS: Disk quotas dquot_6.5.2
[    1.197320] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.204915] FS-Cache: Netfs 'nfs' registered for caching
[    1.211234] msgmni has been set to 369
[    1.217029] io scheduler noop registered
[    1.221143] io scheduler deadline registered (default)
[    1.226455] io scheduler cfq registered
[    1.263413] Console: switching to colour frame buffer device 160x64
[    1.287829] kgdb: Registered I/O driver kgdboc.
[    1.302108] brd: module loaded
[    1.310234] loop: module loaded
[    1.314285] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
[    1.322019] vcos: [1]: vchiq_init_state: called
[    1.327365] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[    1.335351] usbcore: registered new interface driver smsc95xx
[    1.341394] cdc_ncm: 04-Aug-2011
[    1.344827] usbcore: registered new interface driver cdc_ncm
[    1.350675] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.556757] Core Release: 2.80a
[    1.560112] Setting default values for core params
[    1.565064] Finished setting default values for core params
[    1.770944] Using Buffer DMA mode
[    1.774365] Periodic Transfer Interrupt Enhancement - disabled
[    1.780368] Multiprocessor Interrupt Enhancement - disabled
[    1.786082] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.790587] Dedicated Tx FIFOs mode
[    1.794375] dwc_otg: Microframe scheduler enabled
[    1.794421] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.799562] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.807010] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.812730] Init: Port Power? op_state=1
[    1.816759] Init: Power Port (0)
[    1.820210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.827180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.834719] usb usb1: Product: DWC OTG Controller
[    1.839599] usb usb1: Manufacturer: Linux 3.2.27+ dwc_otg_hcd
[    1.845493] usb usb1: SerialNumber: bcm2708_usb
[    1.851022] hub 1-0:1.0: USB hub found
[    1.861148] hub 1-0:1.0: 1 port detected
[    1.872044] dwc_otg: FIQ enabled
[    1.872062] dwc_otg: NAK holdoff enabled
[    1.872084] Module dwc_common_port init
[    1.872430] usbcore: registered new interface driver uas
[    1.884102] Initializing USB Mass Storage driver...
[    1.895610] usbcore: registered new interface driver usb-storage
[    1.908031] USB Mass Storage support registered.
[    1.919249] usbcore: registered new interface driver libusual
[    1.931767] mousedev: PS/2 mouse device common for all mice
[    1.944595] bcm2835-cpufreq: min=700000 max=1000000 cur=700000
[    1.950577] bcm2835-cpufreq: switching to governor powersave
[    1.962574] bcm2835-cpufreq: switching to governor powersave
[    1.974744] cpuidle: using governor ladder
[    1.991111] cpuidle: using governor menu
[    2.001214] sdhci: Secure Digital Host Controller Interface driver
[    2.013549] sdhci: Copyright(c) Pierre Ossman
[    2.024177] sdhci: Enable low-latency mode
[    2.034562] bcm_power_open() -> 1
[    2.044339] Registered led device: mmc0::
[    2.045764] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.060050] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.072332] Indeed it is in host mode hprt0 = 00021501
[    2.084975] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.101068] Registered led device: led0
[    2.115624] usbcore: registered new interface driver usbhid
[    2.148385] usbhid: USB HID core driver
[    2.169578] TCP cubic registered
[    2.188465] Initializing XFRM netlink socket
[    2.201132] mmc0: new high speed SDHC card at address b368
[    2.228468] NET: Registered protocol family 17
[    2.239926] mmcblk0: mmc0:b368 NCard 7.48 GiB 
[    2.256061] Registering the dns_resolver key type
[    2.268151] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.282681]  mmcblk0: p1 p2
[    2.292686] registered taskstats version 1
[    2.304245] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.368599] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.382841] Indeed it is in host mode hprt0 = 00001101
[    2.598758] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.613145] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.627699] hub 1-1:1.0: USB hub found
[    2.638107] hub 1-1:1.0: 3 ports detected
[    2.928511] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.038922] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.052207] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.069104] smsc95xx v1.0.4
[    3.143770] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:40:ef:f8
[    3.248547] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    3.387426] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024
[    3.401027] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.415031] usb 1-1.2: Product: HP Basic USB Keyboard
[    3.426792] usb 1-1.2: Manufacturer: CHICONY
[    3.446418] input: CHICONY HP Basic USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
[    3.464336] generic-usb 0003:03F0:0024.0001: input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-bcm2708_usb-1.2/input0
[   10.321927] EXT4-fs (mmcblk0p2): recovery complete
[   10.336692] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   10.352260] VFS: Mounted root (ext4 filesystem) on device 179:2.
[   10.366635] devtmpfs: mounted
[   10.378000] Freeing init memory: 124K
[   11.702597] udevd[138]: starting version 175
[   13.847911] Disconnect: PortPower off
[   13.858991] ERROR::dwc_otg_hcd_urb_enqueue:477: Not connected
[   13.859004] 
[   13.881087] ERROR::dwc_otg_hcd_urb_enqueue:477: Not connected
[   13.881100] 
[   13.908435] usb 1-1: USB disconnect, device number 2

[   13.933232] usb 1-1.1: USB disconnect, device number 3
[   13.958654] smsc95xx 1-1.1:1.0: eth0: unregister 'smsc95xx' usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet
[   14.009431] usb 1-1.2: USB disconnect, device number 4
[   14.228110] Using Buffer DMA mode
[   14.260444] Periodic Transfer Interrupt Enhancement - disabled
[   15.564456] 
[   15.812102] Using Buffer DMA mode
[   15.838462] Periodic Transfer Interrupt Enhancement - disabled
[   15.868370] Multiprocessor Interrupt Enhancement - disabled
[   15.898404] OTG VER PARAM: 0, OTG VER FLAG: 0
[   15.918431] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   15.918448] 
[   15.945776] SRP: Host mode
[   15.988393] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   15.988410] 
[   16.038484] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.038499] 
[   16.098475] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.098491] 
[   16.155104] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.155122] 
[   16.208501] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.208518] 
[   16.267146] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.267163] 
[   16.328526] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328543] 
[   16.328573] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328585] 
[   16.328605] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328616] 
[   16.328635] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328646] 
[   16.328664] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328675] 
[   16.328693] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328704] 
[   16.328721] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328733] 
[   16.328751] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328761] 
[   16.328779] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328790] 
[   16.328809] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328820] 
[   16.328839] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328850] 
[   16.328868] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328879] 
[   16.328896] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328907] 
[   16.328924] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328935] 
[   16.328952] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328963] 
[   16.328981] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.328992] 
[   16.329009] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329020] 
[   16.329038] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329049] 
[   16.329066] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329078] 
[   16.329096] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329107] 
[   16.329125] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode                                                                                                                             [0/784]
[   16.329137] 
[   16.329155] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329167] 
[   16.329185] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329196] 
[   16.329214] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329225] 
[   16.329243] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329254] 
[   16.329273] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329284] 
[   16.329303] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329314] 
[   16.329333] WARN::dwc_otg_handle_mode_mismatch_intr:71: Mode Mismatch Interrupt: currently in Host mode
[   16.329344] 
[   17.338213] Using Buffer DMA mode
[   17.338239] Periodic Transfer Interrupt Enhancement - disabled
[   17.338250] Multiprocessor Interrupt Enhancement - disabled
[   17.338263] OTG VER PARAM: 0, OTG VER FLAG: 0
[   17.338295] SRP: Host mode
[   17.412219] Init: Port Power? op_state=1
[   17.412236] Init: Power Port (1)
[   17.778531] Indeed it is in host mode hprt0 = 00021501
[   18.038516] usb 1-1: new high-speed USB device number 5 using dwc_otg
[   18.076833] Indeed it is in host mode hprt0 = 00001101
[   18.358843] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[   18.377899] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   18.408975] hub 1-1:1.0: USB hub found
[   18.448598] hub 1-1:1.0: 3 ports detected
[   18.748719] usb 1-1.1: new high-speed USB device number 6 using dwc_otg
[   18.879097] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[   18.906466] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   18.931065] smsc95xx v1.0.4
[   19.014310] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:40:ef:f8
[   19.128461] usb 1-1.2: new low-speed USB device number 7 using dwc_otg
[   19.267726] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024
[   19.288394] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   19.348370] usb 1-1.2: Product: HP Basic USB Keyboard
[   19.385369] usb 1-1.2: Manufacturer: CHICONY
[   19.427521] input: CHICONY HP Basic USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[   19.481151] generic-usb 0003:03F0:0024.0002: input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-bcm2708_usb-1.2/input0
[   23.632279] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   24.121022] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   24.947156] bcm2835 ALSA card created!
[   27.928485] Disconnect: PortPower off
[   27.941035] ERROR::dwc_otg_hcd_urb_enqueue:477: Not connected
[   27.941048] 
[   27.965928] ERROR::dwc_otg_hcd_urb_enqueue:477: Not connected
[   27.965941] 
[   28.018443] ERROR::dwc_otg_hcd_urb_enqueue:477: Not connected
[   28.018455] 
[   28.098437] ERROR::dwc_otg_hcd_urb_enqueue:477: Not connected
[   28.098449] 
[   28.122381] usb 1-1: USB disconnect, device number 5
[   28.148150] usb 1-1.1: USB disconnect, device number 6
[   28.182549] smsc95xx 1-1.1:1.0: eth0: unregister 'smsc95xx' usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet
[   28.259263] usb 1-1.2: USB disconnect, device number 7
[   28.483870] Using Buffer DMA mode
[   28.518490] Periodic Transfer Interrupt Enhancement - disabled
[   28.559076] Multiprocessor Interrupt Enhancement - disabled
[   28.598479] OTG VER PARAM: 0, OTG VER FLAG: 0
[   34.610404] bcm2835-cpufreq: switching to governor ondemand
[   34.610431] bcm2835-cpufreq: switching to governor ondemand