Skip to content

Instantly share code, notes, and snippets.

@juliandunn
Created October 23, 2012 16:12
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save juliandunn/3939752 to your computer and use it in GitHub Desktop.
Save juliandunn/3939752 to your computer and use it in GitHub Desktop.
centos6 bashton can't upgrade kernel
Xen Minimal OS!
start_info: 0x1890000(VA)
nr_pages: 0x1e0000
shared_inf: 0xbde8d000(MA)
pt_base: 0x1893000(VA)
nr_pt_frames: 0x11
mfn_list: 0x990000(VA)
mod_start: 0x0(VA)
mod_len: 0
flags: 0x0
cmd_line: root=/dev/sda1 ro 4
stack: 0x94f860-0x96f860
MM: Init
_text: 0x0(VA)
_etext: 0x5ffbd(VA)
_erodata: 0x78000(VA)
_edata: 0x80ae0(VA)
stack start: 0x94f860(VA)
_end: 0x98fe68(VA)
start_pfn: 18a7
max_pfn: 1e0000
Mapping memory range 0x1c00000 - 0x1e0000000
setting 0x0-0x78000 readonly
skipped 0x1000
MM: Initialise page allocator for 27a0000(27a0000)-1e0000000(1e0000000)
MM: done
Demand map pfns at 1e0001000-21e0001000.
Heap resides at 21e0002000-41e0002000.
Initialising timer interface
Initialising console ... done.
gnttab_table mapped at 0x1e0001000.
Initialising scheduler
Thread "Idle": pointer: 0x21e0002010, stack: 0x36f0000
Initialising xenbus
Thread "xenstore": pointer: 0x21e00027c0, stack: 0x3700000
Dummy main: start_info=0x96f960
Thread "main": pointer: 0x21e0002f70, stack: 0x3710000
"main" "root=/dev/sda1" "ro" "4"
vbd 2048 is hd0
******************* BLKFRONT for device/vbd/2048 **********
backend at /local/domain/0/backend/vbd/83/2048
Failed to read /local/domain/0/backend/vbd/83/2048/feature-barrier.
Failed to read /local/domain/0/backend/vbd/83/2048/feature-flush-cache.
268435456 sectors of 512 bytes
**************************
vbd 2064 is hd1
******************* BLKFRONT for device/vbd/2064 **********
backend at /local/domain/0/backend/vbd/83/2064
Failed to read /local/domain/0/backend/vbd/83/2064/feature-barrier.
Failed to read /local/domain/0/backend/vbd/83/2064/feature-flush-cache.
880732160 sectors of 512 bytes
**************************
Thread "kbdfront": pointer: 0x21e0130010, stack: 0x3720000
******************* FBFRONT for device/vfb/0 **********
******************* KBDFRONT for device/vkbd/0 **********
Failed to read device/vfb/0/backend-id.
Failed to read device/vkbd/0/backend-id.
Error ENOENT when reading the backend path device/vkbd/0/backend
Thread "kbdfront" exited.
Error ENOENT when reading the backend path device/vfb/0/backend
Press `ESC' to enter the menu... 4
Press `ESC' to enter the menu... 3
Press `ESC' to enter the menu... 2
Press `ESC' to enter the menu... 1
Press `ESC' to enter the menu... 0
[H
[J Booting 'CentOS (2.6.32-279.5.2.el6.x86_64)'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.32-279.5.2.el6.x86_64 ro root=LABEL=/ rd_NO_LUKS LANG=
en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashk
ernel=auto rd_NO_LVM rd_NO_DM
initrd /boot/initramfs-2.6.32-279.5.2.el6.x86_64.img
close blk: backend at /local/domain/0/backend/vbd/83/2048
close blk: backend at /local/domain/0/backend/vbd/83/2064
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.5.2.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Fri Aug 24 01:07:11 UTC 2012
Command line: ro root=LABEL=/ rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM rd_NO_DM
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
ACPI in unprivileged domain disabled
released 0 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000000a0000 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000001e0000000 (usable)
DMI not present or invalid.
last_pfn = 0x1e0000 max_arch_pfn = 0x400000000
last_pfn = 0x100000 max_arch_pfn = 0x400000000
init_memory_mapping: 0000000000000000-0000000100000000
init_memory_mapping: 0000000100000000-00000001e0000000
RAMDISK: 02033000 - 04b5b000
No NUMA configuration found
Faking a node at 0000000000000000-00000001e0000000
Bootmem setup node 0 0000000000000000-00000001e0000000
NODE_DATA [0000000000008000 - 000000000003bfff]
bootmap [000000000003c000 - 0000000000077fff] pages 3c
(8 early reservations) ==> bootmem [0000000000 - 01e0000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0005a5e000 - 0005a8f000] XEN PAGETABLES ==> [0005a5e000 - 0005a8f000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0002012024] TEXT DATA BSS ==> [0001000000 - 0002012024]
#4 [0002033000 - 0004b5b000] RAMDISK ==> [0002033000 - 0004b5b000]
#5 [0004b5b000 - 0005a5e000] XEN START INFO ==> [0004b5b000 - 0005a5e000]
#6 [0000100000 - 00008d1000] PGTABLE ==> [0000100000 - 00008d1000]
#7 [0005a8f000 - 0006193000] PGTABLE ==> [0005a8f000 - 0006193000]
Reserving 129MB of memory at 112MB for crashkernel (System RAM: 7680MB)
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001e0000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x00000100 -> 0x001e0000
SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
SMP: Allowing 2 CPUs, 0 hotplug CPUs
No local APIC present
APIC: disable apic facility
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PCI: Warning: Cannot find a gap in the 32bit address range
PCI: Unassigned devices with 32bit resource registers may break!
Allocating PCI resources starting at 1e0100000 (gap: 1e0100000:400000)
Booting paravirtualized kernel on Xen
Xen version: 3.4.3.amazon (preserve-AD)
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88002804f000 s94424 r8192 d24360 u126976
pcpu-alloc: s94424 r8192 d24360 u126976 alloc=31*4096
pcpu-alloc: [0] 0 [0] 1
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1937099
Policy zone: Normal
Kernel command line: ro root=LABEL=/ rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_NO_LVM rd_NO_DM
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 7465900k/7864320k available (5152k kernel code, 388k absent, 398032k reserved, 7166k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:288
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
allocated 62914560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
installing Xen timer for CPU 0
Detected 2000.070 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.14 BogoMIPS (lpj=2000070)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: CPU feature constant_tsc disabled on xen guest
CPU: Unsupported number of siblings 32
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21016 entries in 83 pages
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
installing Xen timer for CPU 1
SMP alternatives: switching to SMP code
CPU: CPU feature constant_tsc disabled on xen guest
CPU: Unsupported number of siblings 32
Brought up 2 CPUs
devtmpfs: initialized
Grant table initialized
regulator: core version 0.5
NET: Registered protocol family 16
PCI: Fatal: No config space access function found
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
xen_balloon: Initialising balloon driver.
last_pfn = 0x1e0000 max_arch_pfn = 0x400000000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 44192k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1351007717.692:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 14668
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key E82C5CB35B8516BA
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos: probe of rtc_cmos failed with error -16
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
XENBUS: Device with no driver: device/vbd/2064
XENBUS: Device with no driver: device/vbd/2048
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 972k freed
Freeing unused kernel memory: 1732k freed
dracut: dracut-004-284.el6_3
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
%Gxlblk_init: register_blkdev major: 202
blkfront: xvdf: barriers disabled
xvdf: unknown partition table
blkfront: xvde: barriers disabled
xvde: xvde1 xvde2
Changing capacity of (202, 64) to 268435456 sectors
xvde: detected capacity change from 0 to 137438953472
EXT4-fs (xvde1): mounted filesystem with ordered data mode. Opts:
dracut: Remounting /dev/disk/by-label/\x2f with -o relatime,ro
EXT4-fs (xvde1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/xvde1
SELinux: Disabled at runtime.
type=1404 audit(1351007720.849:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
Welcome to CentOS
readahead-collector: starting
Starting udev: udev: starting version 147
%GInitialising Xen virtual ethernet driver.
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x10
platform microcode: firmware: requesting intel-ucode/06-2c-02
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ OK ]
Setting hostname localhost: [ OK ]
Setting up Logical Volume Management: No volume groups found
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/xvde1
/: clean, 43534/8152272 files, 867287/33294704 blocks
[/sbin/fsck.ext3 (1) -- /media/ephemeral0] fsck.ext3 -a /dev/xvdf
/dev/xvdf: clean, 11/27525120 files, 1778297/110091520 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: kjournald starting. Commit interval 5 seconds
EXT3-fs (xvdf): using internal journal
EXT3-fs (xvdf): mounted filesystem with ordered data mode
[ OK ]
Enabling local filesystem quotas: [ OK ]
Enabling /etc/fstab swaps: Adding 1036184k swap on /dev/xvde2. Priority:-1 extents:1 across:1036184k SS
[ OK ]
Entering non-interactive startup
readahead-disable-service: delaying service auditd
Calling the system activity data collector (sadc):
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... done.
[ OK ]
Starting portreserve: [ OK ]
Starting system logger: [ OK ]
Starting irqbalance: [ OK ]
Kdump is not supported on this kernel[FAILED]
Starting system message bus: [ OK ]
Running cloud-init
cloud-init: initializationcloud-init start-local running: Tue, 23 Oct 2012 15:55:45 +0000. up 27.85 seconds
2012-10-23 15:55:45,521 - __init__.py[WARNING]: did not find data source from ('nocloud',)
no instance data found in start-local
cloud-init start running: Tue, 23 Oct 2012 15:55:45 +0000. up 28.18 seconds
found data source: DataSourceEc2
[ OK ]
cloud-init: sshec2:
ec2: #############################################################
ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
ec2: 2048 70:80:23:df:f1:ec:70:f2:8c:0b:03:ae:e1:1d:09:17 /etc/ssh/ssh_host_rsa_key.pub (RSA)
ec2: 1024 ec:13:ec:48:8b:da:c4:8a:dc:61:56:ad:8b:79:63:ce /etc/ssh/ssh_host_dsa_key.pub (DSA)
ec2: -----END SSH HOST KEY FINGERPRINTS-----
ec2: #############################################################
[ OK ]
cloud-init: mounts2012-10-23 15:55:48,221 - DataSourceEc2.py[WARNING]: swap does not seem to be configured on this system
2012-10-23 15:55:48,221 - DataSourceEc2.py[WARNING]: swap does not seem to be configured on this system
[ OK ]
cloud-init: package-setup2012-10-23 15:55:48,527 - dist_repo_yum.py[ERROR]: No mirror for yum repo- bailing!
2012-10-23 15:55:48,531 - cloud-init-cfg[WARNING]: Traceback (most recent call last):
File "/usr/bin/cloud-init-cfg", line 97, in main
cc.handle(name, run_args, freq=freq)
File "/usr/lib/python2.6/site-packages/cloudinit/CloudConfig/__init__.py", line 66, in handle
[ name, self.cfg, self.cloud, cloudinit.log, args ])
File "/usr/lib/python2.6/site-packages/cloudinit/__init__.py", line 342, in sem_and_run
func(*args)
File "/usr/lib/python2.6/site-packages/cloudinit/CloudConfig/cc_package_setup.py", line 72, in handle
dist.repo_generate(repo_cfg)
File "/usr/lib/python2.6/site-packages/cloudinit/DistAction/dist_repo_yum.py", line 93, in generate
raise Exception("No mirror defined for yum-repo!")
Exception: No mirror defined for yum-repo!
2012-10-23 15:55:48,532 - cloud-init-cfg[ERROR]: config handling of package-setup, None, [] failed
config handling of package-setup, None, [] failed
[FAILED]
cloud-init: runcmd[ OK ]
Mounting other filesystems: [ OK ]
Starting HAL daemon: [ OK ]
Retrigger failed udev events[ OK ]
Starting sshd: [ OK ]
Starting postfix: [ OK ]
Starting abrt daemon: [ OK ]
Starting crond: [ OK ]
Starting atd: [ OK ]
Running cloud-init user-scripts (none found)[ OK ]
CentOS release 6.3 (Final)
Kernel 2.6.32-279.5.2.el6.x86_64 on an x86_64
ip-10-159-36-27 login: type=1305 audit(1351007764.279:23870): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1351007764.279:23871): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
readahead-collector: starting delayed service auditd
readahead-collector: sorting
readahead-collector: finished
Stopping chef-client: [ OK ]
Shutting down monit: [ OK ]
Stopping atd: [ OK ]
Stopping collectd: [ OK ]
Stopping abrt daemon: [ OK ]
Stopping sshd: [ OK ]
Shutting down nrpe: [ OK ]
Shutting down postfix: [ OK ]
Stopping crond: [ OK ]
Stopping HAL daemon: [ OK ]
Shutting down ntpd: [ OK ]
Stopping system message bus: [ OK ]
Stopping auditd: type=1305 audit(1351008401.217:23993): audit_pid=0 old=1307 auid=4294967295 ses=4294967295 res=1
[ OK ]
type=1305 audit(1351008401.324:23994): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
Shutting down system logger: [ OK ]
Stopping sssd: [ OK ]
Stopping syslog-ng: [FAILED]
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Sending all processes the TERM signal... [ OK ]
Sending all processes the KILL signal... [ OK ]
Saving random seed: [ OK ]
Turning off swap: [ OK ]
Turning off quotas: [ OK ]
Unmounting file systems: [ OK ]
init: Re-executing /sbin/init
Please stand by while rebooting the system...
md: stopping all md devices.
xenbus_dev_shutdown: device/console/0: Initialising != Connected, skipping
Restarting system.
Xen Minimal OS!
start_info: 0x1890000(VA)
nr_pages: 0x1e0000
shared_inf: 0xbde8d000(MA)
pt_base: 0x1893000(VA)
nr_pt_frames: 0x11
mfn_list: 0x990000(VA)
mod_start: 0x0(VA)
mod_len: 0
flags: 0x0
cmd_line: root=/dev/sda1 ro 4
stack: 0x94f860-0x96f860
MM: Init
_text: 0x0(VA)
_etext: 0x5ffbd(VA)
_erodata: 0x78000(VA)
_edata: 0x80ae0(VA)
stack start: 0x94f860(VA)
_end: 0x98fe68(VA)
start_pfn: 18a7
max_pfn: 1e0000
Mapping memory range 0x1c00000 - 0x1e0000000
setting 0x0-0x78000 readonly
skipped 0x1000
MM: Initialise page allocator for 27a0000(27a0000)-1e0000000(1e0000000)
MM: done
Demand map pfns at 1e0001000-21e0001000.
Heap resides at 21e0002000-41e0002000.
Initialising timer interface
Initialising console ... done.
gnttab_table mapped at 0x1e0001000.
Initialising scheduler
Thread "Idle": pointer: 0x21e0002010, stack: 0x36f0000
Initialising xenbus
Thread "xenstore": pointer: 0x21e00027c0, stack: 0x3700000
Dummy main: start_info=0x96f960
Thread "main": pointer: 0x21e0002f70, stack: 0x3710000
"main" "root=/dev/sda1" "ro" "4"
vbd 2048 is hd0
******************* BLKFRONT for device/vbd/2048 **********
backend at /local/domain/0/backend/vbd/84/2048
Failed to read /local/domain/0/backend/vbd/84/2048/feature-barrier.
Failed to read /local/domain/0/backend/vbd/84/2048/feature-flush-cache.
268435456 sectors of 512 bytes
**************************
vbd 2064 is hd1
******************* BLKFRONT for device/vbd/2064 **********
backend at /local/domain/0/backend/vbd/84/2064
Failed to read /local/domain/0/backend/vbd/84/2064/feature-barrier.
Failed to read /local/domain/0/backend/vbd/84/2064/feature-flush-cache.
880732160 sectors of 512 bytes
**************************
Thread "kbdfront": pointer: 0x21e0130010, stack: 0x3720000
******************* FBFRONT for device/vfb/0 **********
******************* KBDFRONT for device/vkbd/0 **********
Failed to read device/vfb/0/backend-id.
Failed to read device/vkbd/0/backend-id.
Error ENOENT when reading the backend path device/vkbd/0/backend
Thread "kbdfront" exited.
Error ENOENT when reading the backend path device/vfb/0/backend
Press `ESC' to enter the menu... 4
Press `ESC' to enter the menu... 3
Press `ESC' to enter the menu... 2
Press `ESC' to enter the menu... 1
Press `ESC' to enter the menu... 0
[H
[J Booting 'CentOS (2.6.32-279.11.1.el6.x86_64)'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.32-279.11.1.el6.x86_64 ro root=UUID=72a57af7-940e-4caa
-b88f-65718c2e591b rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=
us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM rd_NO_DM rhgb quiet
initrd /boot/initramfs-2.6.32-279.11.1.el6.x86_64.img
close blk: backend at /local/domain/0/backend/vbd/84/2048
close blk: backend at /local/domain/0/backend/vbd/84/2064
PCI: Warning: Cannot find a gap in the 32bit address range
PCI: Unassigned devices with 32bit resource registers may break!
PCI: Fatal: No config space access function found
%G
%G
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.32-279.11.1.el6.x86_64 #1
Call Trace:
[<ffffffff814fd6ea>] ? panic+0xa0/0x168
[<ffffffff81070c32>] ? do_exit+0x862/0x870
[<ffffffff8117cde5>] ? fput+0x25/0x30
[<ffffffff81070c98>] ? do_group_exit+0x58/0xd0
[<ffffffff81070d27>] ? sys_exit_group+0x17/0x20
[<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b
Xen Minimal OS!
start_info: 0x1890000(VA)
nr_pages: 0x1e0000
shared_inf: 0xbde8d000(MA)
pt_base: 0x1893000(VA)
nr_pt_frames: 0x11
mfn_list: 0x990000(VA)
mod_start: 0x0(VA)
mod_len: 0
flags: 0x0
cmd_line: root=/dev/sda1 ro 4
stack: 0x94f860-0x96f860
MM: Init
_text: 0x0(VA)
_etext: 0x5ffbd(VA)
_erodata: 0x78000(VA)
_edata: 0x80ae0(VA)
stack start: 0x94f860(VA)
_end: 0x98fe68(VA)
start_pfn: 18a7
max_pfn: 1e0000
Mapping memory range 0x1c00000 - 0x1e0000000
setting 0x0-0x78000 readonly
skipped 0x1000
MM: Initialise page allocator for 27a0000(27a0000)-1e0000000(1e0000000)
MM: done
Demand map pfns at 1e0001000-21e0001000.
Heap resides at 21e0002000-41e0002000.
Initialising timer interface
Initialising console ... done.
gnttab_table mapped at 0x1e0001000.
Initialising scheduler
Thread "Idle": pointer: 0x21e0002010, stack: 0x36f0000
Initialising xenbus
Thread "xenstore": pointer: 0x21e00027c0, stack: 0x3700000
Dummy main: start_info=0x96f960
Thread "main": pointer: 0x21e0002f70, stack: 0x3710000
"main" "root=/dev/sda1" "ro" "4"
vbd 2048 is hd0
******************* BLKFRONT for device/vbd/2048 **********
backend at /local/domain/0/backend/vbd/85/2048
Failed to read /local/domain/0/backend/vbd/85/2048/feature-barrier.
Failed to read /local/domain/0/backend/vbd/85/2048/feature-flush-cache.
268435456 sectors of 512 bytes
**************************
vbd 2064 is hd1
******************* BLKFRONT for device/vbd/2064 **********
backend at /local/domain/0/backend/vbd/85/2064
Failed to read /local/domain/0/backend/vbd/85/2064/feature-barrier.
Failed to read /local/domain/0/backend/vbd/85/2064/feature-flush-cache.
880732160 sectors of 512 bytes
**************************
Thread "kbdfront": pointer: 0x21e0130010, stack: 0x3720000
******************* FBFRONT for device/vfb/0 **********
******************* KBDFRONT for device/vkbd/0 **********
Failed to read device/vfb/0/backend-id.
Failed to read device/vkbd/0/backend-id.
Error ENOENT when reading the backend path device/vkbd/0/backend
Thread "kbdfront" exited.
Error ENOENT when reading the backend path device/vfb/0/backend
Press `ESC' to enter the menu... 4
Press `ESC' to enter the menu... 3
Press `ESC' to enter the menu... 2
Press `ESC' to enter the menu... 1
Press `ESC' to enter the menu... 0
[H
[J Booting 'CentOS (2.6.32-279.11.1.el6.x86_64)'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.32-279.11.1.el6.x86_64 ro root=UUID=72a57af7-940e-4caa
-b88f-65718c2e591b rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=
us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM rd_NO_DM rhgb quiet
initrd /boot/initramfs-2.6.32-279.11.1.el6.x86_64.img
close blk: backend at /local/domain/0/backend/vbd/85/2048
close blk: backend at /local/domain/0/backend/vbd/85/2064
PCI: Warning: Cannot find a gap in the 32bit address range
PCI: Unassigned devices with 32bit resource registers may break!
PCI: Fatal: No config space access function found
%G
%G
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.32-279.11.1.el6.x86_64 #1
Call Trace:
[<ffffffff814fd6ea>] ? panic+0xa0/0x168
[<ffffffff81070c32>] ? do_exit+0x862/0x870
[<ffffffff8117cde5>] ? fput+0x25/0x30
[<ffffffff81070c98>] ? do_group_exit+0x58/0xd0
[<ffffffff81070d27>] ? sys_exit_group+0x17/0x20
[<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b
CloseCancel
System Log: i-c9c911b5
Services
EC2
S3
Route 53
IAM
CloudFront
VPC
Edit
jdunn @ secondmarket
N. Virginia
Help
Navigation
EC2 Dashboard
Events
INSTANCES
Instances
Spot Requests
Reserved Instances
IMAGES
AMIs
Bundle Tasks
ELASTIC BLOCK STORE
Volumes
Snapshots
NETWORK & SECURITY
Security Groups
Elastic IPs
Placement Groups
Load Balancers
Key Pairs
Network Interfaces
My Instances
Viewing:
1 to 1 of 1 Instances
NameF
Instance
AMI ID
Root Device
Type
State
Status Checks
Alarm Status
Monitoring
Security Groups
Key Pair Name
Virtualization
Placement Group
Name Instance AMI ID Platform EBS Optimized Root Device Root Device Name Zone Type State Status Checks Alarm Status Monitoring Lifecycle Public DNS Private DNS Reservation Product Codes RAM Disk ID State Transition Reason Security Groups Security Group IDs Key Pair Name Kernel ID AMI Launch Index Launch Time Elastic IP Virtualization Placement Group Private IPs Secondary Private IPs VPC ID Subnet ID Block Devices Source Dest. Check Tenancy IAM Role
chef1.inf.prv
i-c9c911b5
ami-c1e455a8
ebs
m1.large
running iconrunning
2/2 checks passed
none
basic
use-prod-chef
us-east1-chefbootstrap
paravirtual
1 EC2 Instance selected.
EC2 Instance: chef1.inf.prv (i-c9c911b5) [Instance is running.]
ec2-54-242-102-245.compute-1.amazonaws.com
Description
Status Checks
Monitoring
Tags
AMI: SM-CentOS6-64-EBS-20120906 (ami-c1e455a8)
Alarm Status: none
Zone: us-east-1e
Security Groups: use-prod-chef. view rules
Type: m1.large
State: running
Scheduled Events: No scheduled events
Owner: 344203441401
VPC ID: -
Subnet ID: -
Source/Dest. Check:
Virtualization: paravirtual
Placement Group:
Reservation: r-a95111cf
RAM Disk ID: -
Platform: -
Key Pair Name: us-east1-chefbootstrap
Kernel ID: aki-b4aa75dd
Monitoring: basic
AMI Launch Index: 0
Elastic IP: -
Root Device:
Root Device Type: ebs
Tenancy: default
IAM Role: -
Lifecycle: normal
EBS Optimized: false
Block Devices:
sda
Network Interfaces:
Public DNS: ec2-54-242-102-245.compute-1.amazonaws.com
Private DNS: ip-10-159-36-27.ec2.internal
Product Codes:
Private IPs: 10.159.36.27
Secondary Private IPs:
Launch Time: 2012-10-23 11:54 EDT (less than an hour)
State Transition Reason: -
Termination Protection: Disabled
Remove TagShow/Hide Column
© 2008 - 2012, Amazon Web Services, Inc. or its affiliates. All rights reserved.Privacy PolicyTerms of Use
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment