Skip to content

Instantly share code, notes, and snippets.

/gist:4148163

Created November 26, 2012 13:21
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save anonymous/4148163 to your computer and use it in GitHub Desktop.
Save anonymous/4148163 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
Linux (none) 3.0.36+ #40 PREEMPT Sat Oct 6 12:28:06 BST 2012 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jan 1 00:02:00 2010 from 192.168.0.103
root@(none):~#
root@(none):~# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.0.36+ (mtx512@mtx512-Inspiron-620) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40 PREEMPT Sat Oct 6 12:28:06 BST 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Total Detected Memory: 1024MB with 2 banks
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory Reserved(in bytes):
[ 0.000000] SYS: 0x43000000, 0x00010000
[ 0.000000] LCD: 0x5a000000, 0x02000000
[ 0.000000] G2D: 0x58000000, 0x01000000
[ 0.000000] VE : 0x44000000, 0x05000000
[ 0.000000] RAMCONSOLE : 0x5be00000, 0x00200000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 245248
[ 0.000000] free_area_init_node: node 0, pgdat c078b154, node_mem_map c0946000
[ 0.000000] Normal zone: 1280 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 145664 pages, LIFO batch:31
[ 0.000000] HighMem zone: 768 pages used for memmap
[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243200
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 init=/init loglevel=8 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 446MB 512MB = 958MB total
[ 0.000000] Memory: 833884k/833884k available, 149156k reserved, 393216K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0034000 ( 176 kB)
[ 0.000000] .text : 0xc0034000 - 0xc074b000 (7260 kB)
[ 0.000000] .data : 0xc074c000 - 0xc0793cf0 ( 288 kB)
[ 0.000000] .bss : 0xc0793d14 - 0xc0945df8 (1737 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96 nr_irqs:96 96
[ 0.000000] timer0: Periodic Mode
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
[ 0.000000] Calibrating delay loop... 766.77 BogoMIPS (lpj=3833856)
[ 0.050000] pid_max: default: 32768 minimum: 301
[ 0.050000] Mount-cache hash table entries: 512
[ 0.060000] Initializing cgroup subsys cpuacct
[ 0.060000] Initializing cgroup subsys devices
[ 0.060000] Initializing cgroup subsys freezer
[ 0.070000] Initializing cgroup subsys blkio
[ 0.070000] CPU: Testing write buffer coherency: ok
[ 0.070000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.080000] devtmpfs: initialized
[ 0.080000] print_constraints: dummy:
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.100000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.100000] Initialize DMAC OK
[ 0.110000] bio: create slab <bio-0> at 0
[ 0.110000] SCSI subsystem initialized
[ 0.110000] libata version 3.00 loaded.
[ 0.120000] usbcore: registered new interface driver usbfs
[ 0.120000] usbcore: registered new interface driver hub
[ 0.130000] usbcore: registered new device driver usb
[ 0.130000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.140000] Bluetooth: Core ver 2.16
[ 0.140000] NET: Registered protocol family 31
[ 0.140000] Bluetooth: HCI device and connection manager initialized
[ 0.150000] Bluetooth: HCI socket layer initialized
[ 0.150000] Bluetooth: L2CAP socket layer initialized
[ 0.150000] Bluetooth: SCO socket layer initialized
[ 0.160000] Init eGon pin module V2.0
[ 0.160000] Switching to clocksource aw 64bits couter
[ 0.170000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.170000] FS-Cache: Loaded
[ 0.170000] CacheFiles: Loaded
[ 0.180000] Switched to NOHz mode on CPU #0
[ 0.200000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[ 0.200000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[ 0.210000] hub 1-0:1.0: USB hub found
[ 0.210000] hub 1-0:1.0: 1 port detected
[ 0.220000] WRN:L3794(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: platform_driver_register failed
[ 0.220000] axp driver uning configuration failed(561)
[ 0.230000] axp driver uning configuration failed(573)
[ 0.230000] NET: Registered protocol family 2
[ 0.240000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.240000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.250000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.260000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.260000] TCP reno registered
[ 0.260000] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.270000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.280000] NET: Registered protocol family 1
[ 0.280000] RPC: Registered named UNIX socket transport module.
[ 0.280000] RPC: Registered udp transport module.
[ 0.290000] RPC: Registered tcp transport module.
[ 0.290000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.300000] [pm]aw_pm_init!
[ 0.300000] audit: initializing netlink socket (disabled)
[ 0.300000] type=2000 audit(0.299:1): initialized
[ 0.330000] highmem bounce pool size: 64 pages
[ 0.340000] VFS: Disk quotas dquot_6.5.2
[ 0.340000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.350000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.350000] fuse init (API version 7.16)
[ 0.360000] msgmni has been set to 860
[ 0.360000] alg: No test for stdrng (krng)
[ 0.370000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.370000] io scheduler noop registered (default)
[ 0.380000] io scheduler deadline registered
[ 0.380000] io scheduler cfq registered
[ 0.510000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.540000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.160000] console [ttyS0] enabled
[ 1.170000] [uart]: used uart info.: 0x05
[ 1.200000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.210000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
[ 1.240000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
[ 1.260000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
[ 1.270000] G2D: drv_g2d_init
[ 1.280000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
[ 1.290000] G2D: head:d8000000,tail:d9000000
[ 1.290000] G2D: Module initialized.major:252
[ 1.300000] brd: module loaded
[ 1.310000] loop: module loaded
[ 1.320000] [NAND]nand driver, init.
[ 1.320000] cmu_clk is 408
[ 1.330000] nand clk init end
[ 1.330000] offset 0xc: 0x6141
[ 1.340000] offset 0x14: 0x8200000a
[ 1.340000] [NAND] nand gpio_request
[ 1.350000] [NAND] nand driver version: 0x2 0x9
[ 1.360000] nand interrupte register ok
[ 1.360000] ret of NFC_ChangMode is 0
[ 1.370000] dma_hdle is 0
[ 1.370000] dma_hdle is 10000008
[ 1.380000] cmu_clk is 408
[ 1.380000] nand clk init end
[ 1.390000] offset 0xc: 0x6141
[ 1.390000] offset 0x14: 0x82000006
[ 1.420000] The 0 disk name = bootloader, class name = DISK, disk size = 32768
[ 1.430000] The 1 disk name = env, class name = DISK, disk size = 4096
[ 1.440000] The 2 disk name = boot, class name = DISK, disk size = 65536
[ 1.450000] The 3 disk name = system, class name = DISK, disk size = 1048576
[ 1.470000] The 4 disk name = data, class name = DISK, disk size = 1552960
[ 1.480000] The 5 disk name = misc, class name = DISK, disk size = 2048
[ 1.490000] The 6 disk name = recovery, class name = DISK, disk size = 65536
[ 1.500000] The 7 disk name = cache, class name = DISK, disk size = 524288
[ 1.520000] The 8 disk name = private, class name = DISK, disk size = 2048
[ 1.530000] The 9 disk name = backup, class name = DISK, disk size = 2048
[ 1.540000] The 10 disk name = UDISK, class name = DISK, disk size = 0
[ 1.550000] The 10 disk size = 4480448
[ 1.560000] part total count = 11
[ 1.570000] nanda:
[ 1.570000] nandb: unknown partition table
[ 1.580000] nandc: unknown partition table
[ 1.590000] nandd: unknown partition table
[ 1.600000] nande: unknown partition table
[ 1.610000] nandf: unknown partition table
[ 1.610000] nandg: unknown partition table
[ 1.620000] nandh: unknown partition table
[ 1.630000] nandi:
[ 1.640000] nandj: unknown partition table
[ 1.640000] nandk:
[ 1.650000] benn: nand probe enter
[ 1.650000] [NAND]nand driver, ok.
[ 1.660000] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
[ 1.670000] [EMAC] ahb clk enable
[ 1.680000] [EMAC] ahb gate clk: 0x26141
[ 1.700000] wemac wemac.0: PHY SETUP, reg 0 value: 0
[ 1.710000] wemac wemac.0: resetting device
[ 1.710000] release temp resource
[ 1.720000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.730000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.740000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc083d5cc
[ 1.760000] [sw-ehci1]: open clock
[ 1.780000] [sw-ehci1]: Set USB Power ON
[ 1.790000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.800000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[ 1.820000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
[ 1.850000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
[ 1.850000] ehci_irq: port change detect
[ 1.860000] hub 2-0:1.0: USB hub found
[ 1.870000] hub 2-0:1.0: 1 port detected
[ 1.880000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc083d6dc
[ 1.890000] [sw-ohci1]: open clock
[ 1.920000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.930000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[ 1.940000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
[ 2.010000] hub 3-0:1.0: USB hub found
[ 2.020000] hub 3-0:1.0: 1 port detected
[ 2.020000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc083d7ec
[ 2.040000] [sw-ehci2]: open clock
[ 2.060000] [sw-ehci2]: Set USB Power ON
[ 2.070000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.080000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[ 2.100000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
[ 2.200000] usb 2-1: new high speed USB device number 2 using sw-ehci
[ 2.230000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
[ 2.230000] ehci_irq: port change detect
[ 2.240000] hub 4-0:1.0: USB hub found
[ 2.250000] hub 4-0:1.0: 1 port detected
[ 2.260000] [sw-ehci2]: sw_usb_disable_ehci
[ 2.260000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc083d7ec
[ 2.280000] sw-ehci sw-ehci.2: remove, state 1
[ 2.280000] usb usb4: USB disconnect, device number 1
[ 2.300000] sw-ehci sw-ehci.2: USB bus 4 deregistered
[ 2.300000] [sw-ehci2]: Set USB Power OFF
[ 2.310000] [sw-ehci2]: close clock
[ 2.320000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc083d8fc
[ 2.330000] [sw-ohci2]: open clock
[ 2.360000] [sw-ohci2]: Set USB Power ON
[ 2.360000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.380000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 2.390000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
[ 2.400000] hub 2-1:1.0: USB hub found
[ 2.410000] hub 2-1:1.0: 4 ports detected
[ 2.460000] hub 4-0:1.0: USB hub found
[ 2.470000] hub 4-0:1.0: 1 port detected
[ 2.470000] [sw-ohci2]: sw_usb_disable_ohci
[ 2.480000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc083d8fc
[ 2.490000] sw-ohci sw-ohci.2: remove, state 1
[ 2.500000] usb usb4: USB disconnect, device number 1
[ 2.510000] sw-ohci sw-ohci.2: USB bus 4 deregistered
[ 2.520000] [sw-ohci2]: Set USB Power OFF
[ 2.530000] [sw-ohci2]: close clock
[ 2.530000] Initializing USB Mass Storage driver...
[ 2.540000] usbcore: registered new interface driver usb-storage
[ 2.550000] USB Mass Storage support registered.
[ 2.560000] usbcore: registered new interface driver libusual
[ 2.570000] usbcore: registered new interface driver ums-alauda
[ 2.580000] usbcore: registered new interface driver ums-cypress
[ 2.590000] usbcore: registered new interface driver ums-datafab
[ 2.610000] usbcore: registered new interface driver ums_eneub6250
[ 2.620000] usbcore: registered new interface driver ums-freecom
[ 2.630000] usbcore: registered new interface driver ums-isd200
[ 2.640000] usbcore: registered new interface driver ums-jumpshot
[ 2.650000] usbcore: registered new interface driver ums-karma
[ 2.660000] usbcore: registered new interface driver ums-onetouch
[ 2.670000] usbcore: registered new interface driver ums-realtek
[ 2.680000] usbcore: registered new interface driver ums-sddr09
[ 2.690000] usbcore: registered new interface driver ums-sddr55
[ 2.700000] usbcore: registered new interface driver ums-usbat
[ 2.720000] mousedev: PS/2 mouse device common for all mice
[ 2.730000] sunxi RTC version 0.1
[ 2.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
[ 2.740000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 2.750000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:7
[ 2.760000] using rtc device, rtc, for alarms
[ 2.770000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 2.780000] i2c /dev entries driver
[ 2.790000] !!! base_Addr = 0xe88d2c00
[ 2.790000] config i2c gpio with gpio_config api
[ 2.800000] twi0, apb clock = 24000000
[ 2.810000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[ 2.820000] I2C: i2c-0: AW16XX I2C adapter
[ 2.830000] **********start************
[ 2.830000] 0x40
[ 2.840000] 0xf8
[ 2.840000] 0x28
[ 2.840000] 0x0
[ 2.840000] 0x0
[ 2.850000] **********end************
[ 2.850000] !!! base_Addr = 0xe88d4000
[ 2.860000] twi1, apb clock = 24000000
[ 2.870000] I2C: i2c-1: AW16XX I2C adapter
[ 2.870000] **********start************
[ 2.880000] 0x40
[ 2.880000] 0xf8
[ 2.880000] 0x58
[ 2.890000] 0x0
[ 2.890000] 0x0
[ 2.890000] **********end************
[ 2.900000] !!! base_Addr = 0xe88d6400
[ 2.900000] twi2, apb clock = 24000000
[ 2.910000] I2C: i2c-2: AW16XX I2C adapter
[ 2.920000] **********start************
[ 2.920000] 0x40
[ 2.930000] 0xf8
[ 2.930000] 0x58
[ 2.930000] 0x0
[ 2.930000] 0x0
[ 2.940000] **********end************
[ 2.940000] lirc_dev: IR Remote Control driver registered, major 251
[ 2.950000] IR NEC protocol handler initialized
[ 2.960000] IR RC5(x) protocol handler initialized
[ 2.970000] IR RC6 protocol handler initialized
[ 2.980000] IR JVC protocol handler initialized
[ 2.990000] IR Sony protocol handler initialized
[ 3.000000] IR RC5 (streamzap) protocol handler initialized
[ 3.010000] IR LIRC bridge handler initialized
[ 3.010000] Linux video capture interface: v2.00
[ 3.020000] [cedar dev]: install start!!!
[ 3.030000] [cedar dev]: install end!!!
[ 3.040000] [ace_drv] start!!!
[ 3.040000] [ace_drv] init end!!!
[ 3.050000] [pa_drv] start!!!
[ 3.050000] [pa_drv] init end!!!
[ 3.060000] print_constraints: axp20_ldo1: 1300 mV
[ 3.070000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 3.080000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 3.090000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 3.110000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 3.120000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 3.130000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 3.150000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 3.180000] Bluetooth: HCI UART driver ver 2.2
[ 3.190000] Bluetooth: HCI H4 protocol initialized
[ 3.200000] Bluetooth: HCI BCSP protocol initialized
[ 3.210000] Bluetooth: HCILL protocol initialized
[ 3.210000] cpuidle: using governor ladder
[ 3.220000] cpuidle: using governor menu
[ 3.230000] [mmc_pm]: no sdio card used in configuration
[ 3.240000] [mmc]: sunximmc_init
[ 3.240000] [mmc]: sunxi mmc controller using config : 0xb
[ 3.250000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[ 3.260000] [mmc]: mmc 0 power off !!
[ 3.270000] [mmc]: mmc0 Probe: base:0xe88de000 irq:32 dma:0 pdes:0xe70e8000, ret 0.
[ 3.280000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[ 3.300000] [mmc]: mmc 1 power off !!
[ 3.300000] [mmc]: mmc1 Probe: base:0xe88e0000 irq:33 dma:0 pdes:0xe70f0000, ret 0.
[ 3.320000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[ 3.330000] [mmc]: mmc 3 power off !!
[ 3.330000] [mmc]: mmc3 Probe: base:0xe88e2000 irq:35 dma:0 pdes:0xe70f4000, ret 0.
[ 3.350000] usbcore: registered new interface driver usbhid
[ 3.360000] usbhid: USB HID core driver
[ 3.370000] logger: created 256K log 'log_main'
[ 3.370000] logger: created 256K log 'log_events'
[ 3.380000] logger: created 256K log 'log_radio'
[ 3.390000] logger: created 256K log 'log_system'
[ 3.400000] enter sun4i Audio codec!!!
[ 3.410000] sun4i audio support initialized
[ 3.410000] audiocodec_adap_awxx_init: script_parser_fetch err.
[ 3.430000] sun4i Audio codec successfully loaded..
[ 3.440000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
[ 3.450000] ALSA device list:
[ 3.450000] #0: sun4i-CODEC Audio Codec
[ 3.460000] #1: sun4i-sndhdmi
[ 3.460000] Netfilter messages via NETLINK v0.30.
[ 3.470000] nf_conntrack version 0.5.0 (13029 buckets, 52116 max)
[ 3.480000] IPv4 over IPv4 tunneling driver
[ 3.490000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.500000] TCP cubic registered
[ 3.510000] Initializing XFRM netlink socket
[ 3.510000] NET: Registered protocol family 17
[ 3.520000] NET: Registered protocol family 15
[ 3.530000] Bridge firewalling registered
[ 3.540000] Bluetooth: RFCOMM TTY layer initialized
[ 3.550000] Bluetooth: RFCOMM socket layer initialized
[ 3.560000] Bluetooth: RFCOMM ver 1.11
[ 3.560000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.570000] Bluetooth: BNEP filters: protocol multicast
[ 3.580000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.590000] 802.1Q VLAN Support v1.8
[ 3.600000] [mmc_pm]: No sdio card, please check your config !!
[ 3.610000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.620000] Registering SWP/SWPB emulation handler
[ 3.630000] registered taskstats version 1
[ 3.640000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[ 3.660000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[ 3.670000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[ 3.680000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[ 3.700000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[ 3.710000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[ 3.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 3.740000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:8
[ 3.750000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:08 UTC (1262304008)
[ 3.760000] Waiting for root device /dev/mmcblk0p2...
[ 4.270000] [mmc]: mmc 0 detect change, present 1
[ 4.570000] [mmc]: mmc 0 power on !!
[ 4.610000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 4.620000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 4.630000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 4.650000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 4.660000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 4.670000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 4.740000] mmc0: new high speed SDHC card at address e624
[ 4.750000] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 4.760000] mmcblk0: p1 p2
[ 5.500000] EXT4-fs (mmcblk0p2): recovery complete
[ 5.510000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.530000] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 5.550000] devtmpfs: mounted
[ 5.550000] Freeing init memory: 176K
[ 5.560000] Failed to execute /init. Attempting defaults...
[ 7.410000] udevd[146]: starting version 175
[ 11.740000] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 14.600000] wemac wemac.0: enabling eth0
[ 14.610000] wemac wemac.0: WARNING: no IRQ resource flags set.
[ 14.620000] wemac wemac.0: resetting device
[ 14.630000] wemac wemac.0: eth0: link down
[ 14.640000] wemac wemac.0: shutting down eth0
[ 14.650000] wemac wemac.0: enabling eth0
[ 14.650000] wemac wemac.0: WARNING: no IRQ resource flags set.
[ 14.670000] wemac wemac.0: resetting device
[ 14.670000] wemac wemac.0: eth0: link down
[ 18.680000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
root@(none):~#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment