bisectable6

query

42.Capture.say

result

Bisecting: 2983 revisions left to test after this (roughly 12 steps)
[f9ed7300fc4c3b8f6b170f2dd80099f3c65fca43] Remove unnecessary stubs
»»»»» Testing f9ed7300fc4c3b8f6b170f2dd80099f3c65fca43
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 2669d74cc069480bbcfe692ed3423014a57a8922
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a91ad2da854831a7a38c1d291c277191e6f9bb4b
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 16f64182f0843358004f4dd8ac64d5fdd241cbd7
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing f8edb8295773acd41432e4f85424f5eb7245dbd7
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 714c188d4aa0c5ca59d98dfb0c64c2ea889ab144
»»»»» Script output:
Cannot unpack or Capture `42`.
To create a Capture, add parentheses: \(...)
If unpacking in a signature, perhaps you needlessly used parentheses? -> ($x) {} vs. -> $x {}
  in block <unit> at /tmp/cinJ31Y7yf line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 26bdc95c780c58ea9e851167ee66e5e0849d235a
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 830084430330cd4c740b10353742a3eada46b7c9
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 484f987259bd8b1bbb356780f1a0315ae9d327e3
»»»»» Script output:
Cannot unpack or Capture `42`.
To create a Capture, add parentheses: \(...)
If unpacking in a signature, perhaps you needlessly used parentheses? -> ($x) {} vs. -> $x {}
  in block <unit> at /tmp/cinJ31Y7yf line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing cd5864cfc1ec11425706019f8eb727974b73b83e
»»»»» Script output:
Cannot unpack or Capture `42`.
To create a Capture, add parentheses: \(...)
If unpacking in a signature, perhaps you needlessly used parentheses? -> ($x) {} vs. -> $x {}
  in block <unit> at /tmp/cinJ31Y7yf line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 4ba12ff17c810f8afda35bce3ef8c9a208c83f29
»»»»» Script output:
\()
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 1ea3297b214403eb5b584ffe9b0f2b38a6f05ea7
»»»»» Script output:
Cannot unpack or Capture `42`.
To create a Capture, add parentheses: \(...)
If unpacking in a signature, perhaps you needlessly used parentheses? -> ($x) {} vs. -> $x {}
  in block <unit> at /tmp/cinJ31Y7yf line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing bad9fefdd7e5e569eced85072bb019eef3997c32
»»»»» Script output:
Cannot unpack or Capture `42`.
To create a Capture, add parentheses: \(...)
If unpacking in a signature, perhaps you needlessly used parentheses? -> ($x) {} vs. -> $x {}
  in block <unit> at /tmp/cinJ31Y7yf line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 0
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
bad9fefdd7e5e569eced85072bb019eef3997c32 is the first new commit
commit bad9fefdd7e5e569eced85072bb019eef3997c32
Author: Zoffix Znet <cpan@zoffix.com>
Date:   Mon Oct 9 02:52:31 2017 -0400

    Make .Capture of certain core types throw
    
    To avoid supersticious, performance-reducing parens;
    e.g. -> ($x) {} where -> $x {} was meant.
    
    Discussion: https://irclog.perlgeek.de/perl6/2017-03-07#i_14221839

:040000 040000 af74dc4449d2390a4b9bce8f28cb852c8735d6a4 c5e5dd4a2ee193d63662b2792e40f57c3141fd30 M	src