Instantly share code, notes, and snippets.

Embed
What would you like to do?
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# raspi-tr.com
# Based on original .rtorrent.rc file from http://libtorrent.rakshasa.no/
# Modified by Lemonberry for rtGui http://rtgui.googlecode.com/
#
# This assumes the following directory structure:
#
# /Torrents/Downloading - temporaray location for torrents while downloading (see "directory")
# /Torrents/Complete - Torrents are moved here when complete (see "on_finished")
# /Torrents/TorrentFiles/Auto - The 'autoload' directory for rtorrent to use. Place a file
# in here, and rtorrent loads it #automatically. (see "schedule = watch_directory")
# /Torrents/Downloading/rtorrent.session - for storing rtorrent session information
#
# Specify maximum memory usage
# can be increased through rutorrent settings
## if you use a swap enabled kernel you should increase this
## value, the size of your swap file should be safest.
#maksimum ram kullanimi, byte cinsinden yaziyoruz.
#160 megabyte = 160*1024*1024 = 167772160 byte gibi.
max_memory_usage = 400M
# SSL ceritificate verification is ignored with this flag
network.http.ssl_verify_peer.set=0
#arda
#max_open_files = 64
#safe_sync = yes
#ardason
# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
max_peers = 30
#^100 idi
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 5
# Maximum number of simultanious uploads per torrent.
max_uploads = 2
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# Default directory to save the downloaded torrents.
# indirme klasoru
directory = /media/disk1/rtorrent/downloads
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
# rtorrent in kendi verileri icin kullanacagi session klasoru
session = /media/disk1/rtorrent/session
# Watch a directory for new torrents, and stop those that have been
# deleted.
# rtorrent izleme klasoru
schedule = watch_directory,5,5,load_start=/media/disk1/rtorrent/watch/*.torrent
schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low. */
schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# When the torrent finishes, it executes "mv -n <base_path> ~/Download/"
# and then sets the destination directory to "~/Download/". (0.7.7+)
#on_finished = move_complete,"execute=mv,-u,$d.get_base_path=,/media/disk1/rtorrent/complete/ ;d.set_directory=/media/disk1/rtorrent/complete/"
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 12345-12345
# Start opening ports at a random position within the port range.
#port_random = yes
scgi_port = :5000
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = no
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
dht = disable
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
peer_exchange = no
#
# Do not modify the following parameters unless you know what you're doing.
#
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
# rutorrent nginx configuration
# raspi-tr.com
server {
listen 90;
listen [::]:90;
server_name localhost raspberrypi.local;
root /home/pi/web/rutorrent;
index index.html index.htm index.php;
auth_basic "Giremezsin";
auth_basic_user_file /etc/nginx/.rutorrent_htpasswd;
client_max_body_size 20M;
location / {
try_files $uri $uri/ =404;
}
location /RPC2 {
include scgi_params;
#scgi_pass unix:/home/pi/.rtorrent-scgi.sock;
scgi_pass 127.0.0.1:5000;
}
location ~ \.php$ {
try_files $uri =404;
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass unix:/var/run/php/php7.0-fpm.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment