Last active
January 16, 2022 00:01
-
-
Save Folaht/0d7c703da0400578b8aaaddaac69208d to your computer and use it in GitHub Desktop.
Safe podman container rootnode-ipv4 run files
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/bash | |
cat ~/.local/share/safe/cli/networks/sjefolaht_node_connection_info.config | |
echo | |
sudo podman exec -w /root/.safe/cli/networks/ root_node cat sjefolaht_node_connection_info.config | |
echo | |
sudo podman exec -it root_node /bin/bash |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/sh | |
usage() | |
{ | |
echo "Usage: [-a host_address] [-p host_port] [-n network_dir] [-s storage_dir]" | |
} | |
NUM_NODES=10 | |
NETWORK_NAME=root_node | |
CLI_DIR=~/.local/share/safe/cli/ | |
CON_IP='10.88.1.3' | |
CON_PORT_BASE=12000 | |
CON_PORT_MAX=$(( $CON_PORT_BASE + $NUM_NODES )) | |
HOST_IP='192.168.178.26' | |
HOST_PORT_BASE=12000 | |
HOST_PORT_MAX=$(( $HOST_PORT_BASE + $NUM_NODES )) | |
PUB_IP='83.163.103.119' | |
PUB_PORT_BASE=12000 | |
while getopts 'apns::?h' c | |
do | |
case $c in | |
a) HOST_IP=$OPTARG ;; | |
p) HOST_PORT=$OPTARG ;; | |
n) NETWORK_NAME=$OPTARG ;; | |
d) CLI_DIR=$OPTARG ;; | |
s) STORAGE_DIR=$OPTARG ;; | |
h|?) usage ;; | |
esac | |
done | |
if [ ! -d $CLI_DIR ] | |
then | |
mkdir -p $CLI_DIR | |
podman unshare chown root:root -R ~/.local/share/safe/cli | |
fi | |
sudo podman run \ | |
--name $NETWORK_NAME \ | |
--restart unless-stopped \ | |
--publish $HOST_IP:${HOST_PORT_BASE}-${HOST_PORT_MAX}:${CON_PORT_BASE}-${CON_PORT_MAX}/udp \ | |
--env CON_IP=$CON_IP \ | |
--env CON_PORT=${CON_PORT_BASE} \ | |
--env PUB_IP=$PUB_IP \ | |
--env PUB_PORT=$PUB_PORT_BASE \ | |
--mount type=bind,source=/home/$USER/.local/share/safe/cli/,destination=/root/.safe/cli/ \ | |
--ip $CON_IP \ | |
-d ghcr.io/safenetwork-community/rf-rootnode-ipv4:main-dev | |
sudo podman exec root_node safe networks add sjefolaht | |
sudo podman exec root_node safe networks switch sjefolaht | |
for node_count in {1..10..1} | |
do | |
CON_PORT=$(( $CON_PORT_BASE + $node_count)) | |
PUB_PORT=$(( $PUB_PORT_BASE + $node_count)) | |
sudo podman exec -d $NETWORK_NAME sn_node -vv \ | |
--idle-timeout-msec 5500 \ | |
--keep-alive-interval-msec 4000 \ | |
--skip-auto-port-forwarding \ | |
--local-addr $CON_IP:$CON_PORT \ | |
--public-addr $PUB_IP:$PUB_PORT \ | |
--log-dir /root/.safe/node/node_dir_${node_count} \ | |
--root-dir /root/.safe/node/node_dir_${node_count} | |
done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/sh | |
usage() | |
{ | |
echo "Usage: [-a host_address] [-p host_port] [-n network_dir] [-s storage_dir]" | |
} | |
NUM_NODES=10 | |
NETWORK_NAME=root_node | |
CLI_DIR=~/.local/share/safe/cli/ | |
CON_IP='10.88.1.3' | |
CON_PORT_BASE=12000 | |
CON_PORT_MAX=$(( $CON_PORT_BASE + $NUM_NODES )) | |
HOST_IP='192.168.178.26' | |
HOST_PORT_BASE=12000 | |
HOST_PORT_MAX=$(( $HOST_PORT_BASE + $NUM_NODES )) | |
PUB_IP='83.163.103.119' | |
PUB_PORT_BASE=12000 | |
while getopts 'apns::?h' c | |
do | |
case $c in | |
a) HOST_IP=$OPTARG ;; | |
p) HOST_PORT=$OPTARG ;; | |
n) NETWORK_NAME=$OPTARG ;; | |
d) CLI_DIR=$OPTARG ;; | |
s) STORAGE_DIR=$OPTARG ;; | |
h|?) usage ;; | |
esac | |
done | |
if [ ! -d $CLI_DIR ] | |
then | |
mkdir -p $CLI_DIR | |
podman unshare chown root:root -R ~/.local/share/safe/cli | |
fi | |
sudo podman run \ | |
--name $NETWORK_NAME \ | |
--restart unless-stopped \ | |
--publish $HOST_IP:${HOST_PORT_BASE}-${HOST_PORT_MAX}:${CON_PORT_BASE}-${CON_PORT_MAX}/udp \ | |
--env CON_IP=$CON_IP \ | |
--env CON_PORT=${CON_PORT_BASE} \ | |
--env PUB_IP=$PUB_IP \ | |
--env PUB_PORT=$PUB_PORT_BASE \ | |
--mount type=bind,source=/home/$USER/.local/share/safe/cli/,destination=/root/.safe/cli/ \ | |
--ip $CON_IP \ | |
-d ghcr.io/safenetwork-community/rf-rootnode-ipv4:main | |
sudo podman exec root_node safe networks add sjefolaht | |
sudo podman exec root_node safe networks switch sjefolaht | |
for node_count in {1..10..1} | |
do | |
CON_PORT=$(( $CON_PORT_BASE + $node_count)) | |
PUB_PORT=$(( $PUB_PORT_BASE + $node_count)) | |
sudo podman exec -d $NETWORK_NAME sn_node \ | |
--idle-timeout-msec 5500 \ | |
--keep-alive-interval-msec 4000 \ | |
--skip-auto-port-forwarding \ | |
--local-addr $CON_IP:$CON_PORT \ | |
--public-addr $PUB_IP:$PUB_PORT \ | |
--log-dir /root/.safe/node/node_dir_${node_count} \ | |
--root-dir /root/.safe/node/node_dir_${node_count} | |
done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/sh | |
usage() | |
{ | |
echo "Usage: [-a host_address] [-p host_port] [-n network_dir] [-s storage_dir]" | |
} | |
CON_IP='10.88.1.3' | |
CON_PORT=12000 | |
PUB_IP='83.163.103.119' | |
PUB_PORT=12000 | |
HOST_IP='192.168.178.26' | |
HOST_PORT=12000 | |
CLI_DIR=~/.local/share/safe/cli/ | |
while getopts 'apns::?h' c | |
do | |
case $c in | |
a) HOST_IP=$OPTARG ;; | |
p) HOST_PORT=$OPTARG ;; | |
n) NETWORK_NAME=$OPTARG ;; | |
d) CLI_DIR=$OPTARG ;; | |
s) STORAGE_DIR=$OPTARG ;; | |
h|?) usage ;; | |
esac | |
done | |
if [ ! -d $CLI_DIR ] | |
then | |
mkdir -p $CLI_DIR | |
podman unshare chown root:root -R ~/.local/share/safe/cli | |
fi | |
sudo podman run \ | |
--name root_node \ | |
--restart unless-stopped \ | |
--publish $HOST_IP:$HOST_PORT:$CON_PORT/udp \ | |
--env CON_IP=$CON_IP \ | |
--env CON_PORT=$CON_PORT \ | |
--env PUB_IP=$PUB_IP \ | |
--env PUB_PORT=$PUB_PORT \ | |
--mount type=bind,source=/home/$USER/.local/share/safe/cli/,destination=/root/.safe/cli/ \ | |
--ip $CON_IP \ | |
-d ghcr.io/safenetwork-community/rf-rootnode-ipv4:main | |
sudo podman exec root_node safe networks add sjefolaht |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/bash | |
sudo podman stop root_node | |
sudo podman rm -f root_node |
Probably. I just didn't want to take any chances.
I added them because I thought I saw somewhere that tcp was being used by the safe network.
Can't recall where though. Maybe in the logs?
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Are the references to tcp not redundant?
I think they could all be deleted.
also replace each instance of "folaht" with $USER