F1 Automation.yaml

alias: F1 Lamp - Sync With Race Flags
description: "Sync the lamp with the flags"
triggers:
  - entity_id:
      - sensor.f1_track_status
      - sensor.f1_current_session
      - binary_sensor.f1_safety_car
    trigger: state
actions:
  - data:
      name: F1 Lamp Debug
      message: >
        session={{ current_session }}, track={{ track_status }}, active={{
        session_active }}, sc={{ sc_active }}
    action: logbook.log
  - choose:
      - conditions:
          - condition: template
            value_template: "{{ session_active and track_status == 'RED' }}"
        sequence:
          - target:
              entity_id: select.f1lamp_playlist
            data:
              option: "{{ playlist_red }}"
            action: select.select_option
      - conditions:
          - condition: template
            value_template: "{{ session_active and sc_active }}"
        sequence:
          - target:
              entity_id: select.f1lamp_playlist
            data:
              option: "{{ playlist_sc }}"
            action: select.select_option
      - conditions:
          - condition: template
            value_template: "{{ session_active and track_status == 'VSC' }}"
        sequence:
          - target:
              entity_id: select.f1lamp_playlist
            data:
              option: "{{ playlist_vsc }}"
            action: select.select_option
      - conditions:
          - condition: template
            value_template: "{{ session_active and track_status == 'YELLOW' }}"
        sequence:
          - target:
              entity_id: select.f1lamp_playlist
            data:
              option: "{{ playlist_yellow }}"
            action: select.select_option
      - conditions:
          - condition: template
            value_template: "{{ session_active and track_status == 'CLEAR' }}"
        sequence:
          - target:
              entity_id: select.f1lamp_playlist
            data:
              option: "{{ playlist_green_resume }}"
            action: select.select_option
    default:
      - target:
          entity_id: select.f1lamp_playlist
        data:
          option: "{{ playlist_idle }}"
        action: select.select_option
mode: single
variables:
  playlist_idle: IDLE
  playlist_yellow: YellowFlag
  playlist_sc: SC
  playlist_vsc: VSC
  playlist_red: RedFlag
  playlist_green_resume: GreenFlag
  playlist_finish: CHEQ
  track_status: "{{ states('sensor.f1_track_status') }}"
  current_session: "{{ states('sensor.f1_current_session') }}"
  session_active: |
    {{ current_session in [
         'Practice 1', 'Practice 2', 'Practice 3',
         'Qualifying', 'Sprint Qualifying', 'Sprint', 'Race'
       ] }}
  sc_active: |
    {{ is_state('binary_sensor.f1_safety_car', 'on')
       or track_status == 'SC' }}

If you don't see Safety Car, there is a bug in the latest release 4.0, you need to download the Beta version. But yes, I've stopped using it - just need to see if it still works during the race. If not I'll need to swap out the Entity State to Safety Car Ah, didn't spotted that I hadn't used CHEQ - will need to add this to my Conditions
You can use either a Preset (easier) or a Playlist - You need a Preset for a Playlist to attach too - so just use Preset. I was showing a simple approach. Not sure I understand what you mean to "indicate the current P1 driver"...
Enjoy your party.. I have loads of LEDs configured in HA, asked the wife if I can set these up to match too... not a chance... lol

P1, so who ever is currently leading race, think there in an entity for top three or something.

Did you ever figure this out? This is exactly what I want to do as well, have the 1-part of the logo indicate either P1 or P1-3. There is a seperate entity for P1, P2 and P3 I saw in the F1 Sensor docs, but I can't figure out how to add that to the automation

If you don't see Safety Car, there is a bug in the latest release 4.0, you need to download the Beta version. But yes, I've stopped using it - just need to see if it still works during the race. If not I'll need to swap out the Entity State to Safety Car Ah, didn't spotted that I hadn't used CHEQ - will need to add this to my Conditions
You can use either a Preset (easier) or a Playlist - You need a Preset for a Playlist to attach too - so just use Preset. I was showing a simple approach. Not sure I understand what you mean to "indicate the current P1 driver"...
Enjoy your party.. I have loads of LEDs configured in HA, asked the wife if I can set these up to match too... not a chance... lol

P1, so who ever is currently leading race, think there in an entity for top three or something.

Did you ever figure this out? This is exactly what I want to do as well, have the 1-part of the logo indicate either P1 or P1-3. There is a seperate entity for P1, P2 and P3 I saw in the F1 Sensor docs, but I can't figure out how to add that to the automation

I ended up dedicating my F1 logo box to just race leader and I added lights behind TV for race status. Here is my code that changes logo to match P1. I have a preset for every driver on WLED named with first three of last names.