MateuszKubuszok/.tmux.conf

## .tmux.conf
# Open window/pane in the same PATH
bind c   new-window -c "#{pane_current_path}"
bind '"' split-window -c "#{pane_current_path}"
bind %   split-window -h -c "#{pane_current_path}"
# Reload config
bind R   source-file ~/.tmux.conf \; display-message "Config reloaded..."

# Window tab menu
bind-key  -T root  MouseDown3Status      display-menu -T "#[align=centre]#{window_index}:#{window_name}" -t = -x W -y S \
  "Swap Left"                         l "swap-window -t:-1"                                  \
  "Swap Right"                        r "swap-window -t:+1"                                  \
  "#{?pane_marked_set,,-}Swap Marked" s swap-window                                          \
  ""                                                                                         \
  Kill                                X kill-window                                          \
  Respawn                             R "respawn-window -k"                                  \
  "#{?pane_marked,Unmark,Mark}"       m "select-pane -m"                                     \
  Rename                              n "command-prompt -I \"#W\" \"rename-window -- '%%'\"" \
  ""                                                                                         \
  "New After"                         w "new-window -a"                                      \
  "New At End"                        W new-window

# Window status left menu
bind-key  -T root  MouseDown3StatusLeft  display-menu -T "#[align=centre]#{session_name}" -t = -x M -y S \
  Next          n "switch-client -n"                                    \
  Previous      p "switch-client -p"                                    \
  ""                                                                    \
  Renumber      N "move-window -r"                                      \
  Rename        n "command-prompt -I \"#S\" \"rename-session -- '%%'\"" \
  ""                                                                    \
  "New Session" s new-session                                           \
  "New Window"  w "new-window -c \"#{pane_current_path}\""              \

# Window status right menu
bind-key  -T root  MouseDown3StatusRight display-menu -T "#[align=centre]#{client_name}" -t = -x M -y S \
  Detach            d   detach-client                                                        \
  "Detach & Kill"   X   "detach-client -P"                                                   \
  "Detach Others"   o   "detach-client -a"                                                   \
  ""                                                                                         \
  "Save session"    C-s "run-shell ~/.tmux/plugins/tmux-resurrect/scripts/save.sh"           \
  "Restore session" C-r "run-shell ~/.tmux/plugins/tmux-resurrect/scripts/restore.sh"        \
  "Switch to"       g   "run-shell ~/.tmux/plugins/tmux-sessionist/scripts/goto_session.sh"  \
  ""                                                                                         \
  "Reload config"   R   "source-file ~/.tmux.conf \; display-message \"Config reloaded...\"" \
  "Install plugin"  I   "run-shell ~/.tmux/plugins/tpm/bindings/install_plugins"             \
  "Update plugins"  I   "run-shell ~/.tmux/plugins/tpm/bindings/update_plugins"              \
  ""                                                                                         \
  Lock              l   lock-client                                                          \

# Pane menu
bind-key  -T root  MouseDown3Pane      display-menu -T "#[align=centre]#{pane_index} (#{pane_id})" -t = -x M -y M \
  "Search regexp"                                                 /   "run-shell ~/.tmux/plugins/tmux-copycat/scripts/copycat_search.sh" \
  "#{?mouse_word,Search For #[underscore]#{=/9/...:mouse_word},}" C-r "copy-mode -t=; send -Xt= search-backward \"#{q:mouse_word}\""     \
  "#{?mouse_word,Type #[underscore]#{=/9/...:mouse_word},}"       C-y "send-keys -l -- \"#{q:mouse_word}\""                              \
  "#{?mouse_word,Copy #[underscore]#{=/9/...:mouse_word},}"       c   "set-buffer -- \"#{q:mouse_word}\""                                \
  "#{?mouse_line,Copy Line,}"                                     l   "set-buffer -- \"#{q:mouse_line}\""                                \
  ""                                                                                                                                     \
  "Toggle logging"                                                P   "run-shell ~/.tmux/plugins/tmux-logging/scripts/toggle_logging.sh" \
  "Screen capture"                                                M-p "run-shell ~/.tmux/plugins/tmux-logging/scripts/screen_capture.sh" \
  "Save history"                                                  M-P "run-shell ~/.tmux/plugins/tmux-logging/scripts/save_complete_history.sh" \
  "Clear pane history"                                            M-c "run-shell ~/.tmux/plugins/tmux-logging/scripts/clear_history.sh"  \
  ""                                                                                                                                     \
  "Horizontal Split"                                              h   "split-window -h -c \"#{pane_current_path}\""                      \
  "Vertical Split"                                                v   "split-window -v -c \"#{pane_current_path}\""                      \
  ""                                                                                                                                     \
  "Swap Up"                                                       u   "swap-pane -U"                                                     \
  "Swap Down"                                                     d   "swap-pane -D"                                                     \
  "#{?pane_marked_set,,-}Swap Marked"                             s   swap-pane                                                          \
  ""                                                                                                                                     \
  Kill                                                            X   kill-pane                                                          \
  Respawn                                                         R   "respawn-pane -k"                                                  \
  "#{?pane_marked,Unmark,Mark}"                                   m   "select-pane -m"                                                   \
  ""                                                                                                                                     \
  "#{?window_zoomed_flag,Unzoom,Zoom}"                            z   "resize-pane -Z"                                                   \

# Use ZSH so that default shell can be changed to tmux
set-option -g default-shell /usr/bin/zsh

# Initialize Tmux Plugin Manager
set -g @plugin 'tmux-plugins/tpm'
set -g @plugin 'tmux-plugins/tmux-sensible'

# Copying (prefix + y: command, prefix + Y: PWD)
set -g set-clipboard external
set -g @plugin 'tmux-plugins/tmux-yank'
set -g @yank_action 'copy-pipe'
set -g @yank_selection 'clipboard'
set -g @yank_selection_mouse 'clipboard'
# Searching (prefix + /, n, N), copying (prefix + y: command, prefix + Y: PWD)
set -g @plugin 'tmux-plugins/tmux-copycat'
# Logging (prefix + P: start, prefix + alt + p: dump pane, prefix + alt + P: full history to file, prefix + alt + c: clear)
set -g @plugin 'tmux-plugins/tmux-logging'

# Mouse support
set-option -g mouse on
set -g terminal-overrides 'screen*:smcup@:rmcup@'
set -g @scroll-in-moused-over-pane 'on'
set -g @emulate-scroll-for-no-mouse-alternate-buffer 'on'
set -g @plugin 'nhdaly/tmux-better-mouse-mode'

# Session management (prefix + s, prefix + r)
set -g @plugin 'tmux-plugins/tmux-resurrect'
# (prefix + g: ask for name and switch to it, prefix + C: create new with a name, prefix + X: killcurrent without exiting tmux, prefix + S: go back to last session, prefix + t + "/%/@: join)
set -g @plugin 'tmux-plugins/tmux-sessionist'

# Sidebar (prefix + tab)
set -g @plugin 'tmux-plugins/tmux-sidebar'

run -b '~/.tmux/plugins/tpm/tpm'

## .zshrc
# if you are in tmux already and want to: 1. start tmuxinator 2. switch to new session 3. exit old one
function tmux-into() { tmuxinator start $1 --no-attatch && tmux switch -t $1 && exit }

## alacritty.yml
# Configuration for Alacritty, the GPU enhanced terminal emulator.

# Any items in the `env` entry below will be added as
# environment variables. Some entries may override variables
# set by alacritty itself.
#env:
  # TERM variable
  #
  # This value is used to set the `$TERM` environment variable for
  # each instance of Alacritty. If it is not present, alacritty will
  # check the local terminfo database and use `alacritty` if it is
  # available, otherwise `xterm-256color` is used.
  #TERM: xterm-256color

window:
  # Window dimensions (changes require restart)
  #
  # Specified in number of columns/lines, not pixels.
  # If both are `0`, this setting is ignored.
  dimensions:
    columns: 0
    lines: 0

  # Window padding (changes require restart)
  #
  # Blank space added around the window in pixels. This padding is scaled
  # by DPI and the specified value is always added at both opposing sides.
  padding:
    x: 2
    y: 2

  # Spread additional padding evenly around the terminal content.
  dynamic_padding: false

  # Window decorations
  #
  # Values for `decorations`:
  #     - full: Borders and title bar
  #     - none: Neither borders nor title bar
  #
  # Values for `decorations` (macOS only):
  #     - transparent: Title bar, transparent background and title bar buttons
  #     - buttonless: Title bar, transparent background, but no title bar buttons
  decorations: full

  # When true, alacritty starts maximized.
  startup_mode: Maximized

scrolling:
  # Maximum number of lines in the scrollback buffer.
  # Specifying '0' will disable scrolling.
  history: 10000

  # Number of lines the viewport will move for every line scrolled when
  # scrollback is enabled (history > 0).
  multiplier: 3

  # Faux Scrolling
  #
  # The `faux_multiplier` setting controls the number of lines the terminal
  # should scroll when the alternate screen buffer is active. This is used
  # to allow mouse scrolling for applications like `man`.
  #
  # Specifying `0` will disable faux scrolling.
  #faux_multiplier: 3

# Font configuration (changes require restart)
font:
  # Normal (roman) font face
  normal:
    # Font family
    #
    # Default:
    #   - (macOS) Menlo
    #   - (Linux) monospace
    #   - (Windows) Consolas
    family: "Source Code Pro Semibold"

    # The `style` can be specified to pick a specific face.
    #style: Regular

  # Bold font face
  bold:
    # Font family
    #
    # If the bold family is not specified, it will fall back to the
    # value specified for the normal font.
    family: "Source Code Pro Semibold"

    # The `style` can be specified to pick a specific face.
    #style: Bold

  # Italic font face
  italic:
    # Font family
    #
    # If the italic family is not specified, it will fall back to the
    # value specified for the normal font.
    family: "Source Code Pro Semibold"

    # The `style` can be specified to pick a specific face.
    #style: Italic

  # Point size
  size: 13.0

  # Offset is the extra space around each character. `offset.y` can be thought of
  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
  offset:
    x: 0
    y: 0

  # Glyph offset determines the locations of the glyphs within their cells with
  # the default being at the bottom. Increasing `x` moves the glyph to the right,
  # increasing `y` moves the glyph upwards.
  glyph_offset:
    x: 0
    y: 0

  # Thin stroke font rendering (macOS only)
  #
  # Thin strokes are suitable for retina displays, but for non-retina screens
  # it is recommended to set `use_thin_strokes` to `false`
  #
  # macOS >= 10.14.x:
  #
  # If the font quality on non-retina display looks bad then set
  # `use_thin_strokes` to `true` and enable font smoothing by running the
  # following command:
  #   `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
  #
  # This is a global setting and will require a log out or restart to take
  # effect.
  use_thin_strokes: true

# Display the time it takes to redraw each frame.
#render_timer: false

# Keep the log file after quitting Alacritty.
#persistent_logging: false

# If `true`, bold text is drawn using the bright color variants.
draw_bold_text_with_bright_colors: true

# Colors (Tomorrow Night Bright)
colors:
  # Default colors
  primary:
    background: '0x1e1e1e'
    foreground: '0xa7a7a7'

    # Bright and dim foreground colors
    #
    # The dimmed foreground color is calculated automatically if it is not present.
    # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
    # is `false`, the normal foreground color will be used.
    #dim_foreground: '0x9a9a9a'
    #bright_foreground: '0xffffff'

  # Cursor colors
  #
  # Colors which should be used to draw the terminal cursor. If these are unset,
  # the cursor color will be the inverse of the cell color.
  cursor:
    text: '0x1e1e1e'
    cursor: '0xa7a7a7'

  # Normal colors
  normal:
    black:   '0x1e1e1e'
    red:     '0xcf6a4c'
    green:   '0x8f9d6a'
    yellow:  '0xf9ee98'
    blue:    '0x7587a6'
    magenta: '0x9b859d'
    cyan:    '0xafc4db'
    white:   '0xa7a7a7'

  # Bright colors
  bright:
    black:   '0x5f5a60'
    red:     '0xcf6a4c'
    green:   '0x8f9d6a'
    yellow:  '0xf9ee98'
    blue:    '0x7587a6'
    magenta: '0x9b859d'
    cyan:    '0xafc4db'
    white:   '0xa7a7a7'

  # Dim colors
  #
  # If the dim colors are not set, they will be calculated automatically based
  # on the `normal` colors.
  #dim:
  #  black:   '0x000000'
  #  red:     '0x8c3336'
  #  green:   '0x7a8530'
  #  yellow:  '0x97822e'
  #  blue:    '0x506d8f'
  #  magenta: '0x80638e'
  #  cyan:    '0x497e7a'
  #  white:   '0x9a9a9a'

  # Indexed Colors
  #
  # The indexed colors include all colors from 16 to 256.
  # When these are not set, they're filled with sensible defaults.
  #
  # Example:
  #   `- { index: 16, color: '0xff00ff' }`
  #
  indexed_colors: []

# Visual Bell
#
# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
# rung, the terminal background will be set to white and transition back to the
# default background color. You can control the rate of this transition by
# setting the `duration` property (represented in milliseconds). You can also
# configure the transition function by setting the `animation` property.
#
# Values for `animation`:
#   - Ease
#   - EaseOut
#   - EaseOutSine
#   - EaseOutQuad
#   - EaseOutCubic
#   - EaseOutQuart
#   - EaseOutQuint
#   - EaseOutExpo
#   - EaseOutCirc
#   - Linear
#
# Specifying a `duration` of `0` will disable the visual bell.
visual_bell:
  animation: EaseOutExpo
  duration: 0
  color: '0xffffff'

# Background opacity
#
# Window opacity as a floating point number from `0.0` to `1.0`.
# The value `0.0` is completely transparent and `1.0` is opaque.
background_opacity: 0.95

# Mouse bindings
#
# Available fields:
#   - mouse
#   - action
#   - mods (optional)
#
# Values for `mouse`:
#   - Middle
#   - Left
#   - Right
#   - Numeric identifier such as `5`
#
# All available `mods` and `action` values are documented in the key binding
# section.
mouse_bindings:
  - { mouse: Middle, action: PasteSelection }

mouse:
  # Click settings
  #
  # The `double_click` and `triple_click` settings control the time
  # alacritty should wait for accepting multiple clicks as one double
  # or triple click.
  double_click: { threshold: 300 }
  triple_click: { threshold: 300 }

  # If this is `true`, the cursor is temporarily hidden when typing.
  hide_when_typing: false

  url:
    # URL launcher
    #
    # This program is executed when clicking on a text which is recognized as a URL.
    # The URL is always added to the command as the last parameter.
    #
    # When set to `None`, URL launching will be disabled completely.
    #
    # Default:
    #   - (macOS) open
    #   - (Linux) xdg-open
    #   - (Windows) explorer
    #launcher: xdg-open

    # URL modifiers
    #
    # These are the modifiers that need to be held down for opening URLs when clicking
    # on them. The available modifiers are documented in the key binding section.
    modifiers: None

selection:
  semantic_escape_chars: ",│`|:\"' ()[]{}<>"

  # When set to `true`, selected text will be copied to the primary clipboard.
  save_to_clipboard: false

# Allow terminal applications to change Alacritty's window title.
dynamic_title: true

cursor:
  # Cursor style
  #
  # Values for `style`:
  #   - ▇ Block
  #   - _ Underline
  #   - | Beam
  style: Beam

  # If this is `true`, the cursor will be rendered as a hollow box when the
  # window is not focused.
  unfocused_hollow: true

# Live config reload (changes require restart)
live_config_reload: true

# Shell
#
# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
# Entries in `shell.args` are passed unmodified as arguments to the shell.
#
# Default:
#   - (Linux/macOS) /bin/bash --login
#   - (Windows) powershell
shell:
  program: /bin/tmux
#  args:
#    - --login

# Windows 10 ConPTY backend (Windows only)
#
# This will enable better color support and may resolve other issues,
# however this API and its implementation is still young and so is
# disabled by default, as stability may not be as good as the winpty
# backend.
#
# Alacritty will fall back to the WinPTY automatically if the ConPTY
# backend cannot be initialized.
enable_experimental_conpty_backend: false

# Send ESC (\x1b) before characters when alt is pressed.
alt_send_esc: true

# Key bindings
#
# Key bindings are specified as a list of objects. Each binding will specify a
# key and modifiers required to trigger it, terminal modes where the binding is
# applicable, and what should be done when the key binding fires. It can either
# send a byte sequence to the running application (`chars`), execute a
# predefined action (`action`) or fork and execute a specified command plus
# arguments (`command`).
#
# Bindings are always filled by default, but will be replaced when a new binding
# with the same triggers is defined. To unset a default binding, it can be
# mapped to the `None` action.
#
# Example:
#   `- { key: V, mods: Control|Shift, action: Paste }`
#
# Available fields:
#   - key
#   - mods (optional)
#   - chars | action | command (exactly one required)
#   - mode (optional)
#
# Values for `key`:
#   - `A` -> `Z`
#   - `F1` -> `F12`
#   - `Key1` -> `Key0`
#
#   A full list with available key codes can be found here:
#   https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
#
#   Instead of using the name of the keys, the `key` field also supports using
#   the scancode of the desired key. Scancodes have to be specified as a
#   decimal number.
#   This command will allow you to display the hex scancodes for certain keys:
#     `showkey --scancodes`
#
# Values for `mods`:
#   - Command
#   - Control
#   - Super
#   - Shift
#   - Alt
#
#   Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`.
#   Whitespace and capitalization is relevant and must match the example.
#
# Values for `chars`:
#   The `chars` field writes the specified string to the terminal. This makes
#   it possible to pass escape sequences.
#   To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
#   the command `showkey -a` outside of tmux.
#   Note that applications use terminfo to map escape sequences back to
#   keys. It is therefore required to update the terminfo when
#   changing an escape sequence.
#
# Values for `action`:
#   - Paste
#   - PasteSelection
#   - Copy
#   - IncreaseFontSize
#   - DecreaseFontSize
#   - ResetFontSize
#   - ScrollPageUp
#   - ScrollPageDown
#   - ScrollToTop
#   - ScrollToBottom
#   - ClearHistory
#   - Hide
#   - Quit
#   - ClearLogNotice
#   - SpawnNewInstance
#   - None
#
# Values for `command`:
#   The `command` field must be a map containing a `program` string and
#   an `args` array of command line parameter strings.
#
#   Example:
#       `command: { program: "alacritty", args: ["-e", "vttest"] }`
#
# Values for `mode`:
#   - ~AppCursor
#   - AppCursor
#   - ~AppKeypad
#   - AppKeypad
key_bindings:
  # (Windows/Linux only)
  #- { key: V,        mods: Control|Shift, action: Paste            }
  #- { key: C,        mods: Control|Shift, action: Copy             }
  #- { key: Insert,   mods: Shift,         action: PasteSelection   }
  #- { key: Key0,     mods: Control,       action: ResetFontSize    }
  #- { key: Equals,   mods: Control,       action: IncreaseFontSize }
  #- { key: Subtract, mods: Control,       action: DecreaseFontSize }

  # (macOS only)
  #- { key: Key0,   mods: Command, action: ResetFontSize    }
  #- { key: Equals, mods: Command, action: IncreaseFontSize }
  #- { key: Minus,  mods: Command, action: DecreaseFontSize }
  #- { key: K,      mods: Command, action: ClearHistory     }
  #- { key: K,      mods: Command, chars: "\x0c"            }
  #- { key: V,      mods: Command, action: Paste            }
  #- { key: C,      mods: Command, action: Copy             }
  #- { key: H,      mods: Command, action: Hide             }
  #- { key: Q,      mods: Command, action: Quit             }
  #- { key: W,      mods: Command, action: Quit             }

  - { key: Paste,                   action: Paste                            }
  - { key: Copy,                    action: Copy                             }
  - { key: L,        mods: Control, action: ClearLogNotice                   }
  - { key: L,        mods: Control, chars: "\x0c"                            }
  - { key: Home,                    chars: "\x1bOH",        mode: AppCursor  }
  - { key: Home,                    chars: "\x1b[H",        mode: ~AppCursor }
  - { key: End,                     chars: "\x1bOF",        mode: AppCursor  }
  - { key: End,                     chars: "\x1b[F",        mode: ~AppCursor }
  - { key: PageUp,   mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~",     mode: Alt        }
  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                       }
  - { key: PageUp,                  chars: "\x1b[5~"                         }
  - { key: PageDown, mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~",     mode: Alt        }
  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                       }
  - { key: PageDown,                chars: "\x1b[6~"                         }
  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                          }
  - { key: Back,                    chars: "\x7f"                            }
  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                        }
  - { key: Insert,                  chars: "\x1b[2~"                         }
  - { key: Delete,                  chars: "\x1b[3~"                         }
  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                       }
  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                       }
  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                       }
  - { key: Left,                    chars: "\x1b[D",        mode: ~AppCursor }
  - { key: Left,                    chars: "\x1bOD",        mode: AppCursor  }
  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                       }
  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                       }
  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                       }
  - { key: Right,                   chars: "\x1b[C",        mode: ~AppCursor }
  - { key: Right,                   chars: "\x1bOC",        mode: AppCursor  }
  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                       }
  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                       }
  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                       }
  - { key: Up,                      chars: "\x1b[A",        mode: ~AppCursor }
  - { key: Up,                      chars: "\x1bOA",        mode: AppCursor  }
  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                       }
  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                       }
  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                       }
  - { key: Down,                    chars: "\x1b[B",        mode: ~AppCursor }
  - { key: Down,                    chars: "\x1bOB",        mode: AppCursor  }
  - { key: F1,                      chars: "\x1bOP"                          }
  - { key: F2,                      chars: "\x1bOQ"                          }
  - { key: F3,                      chars: "\x1bOR"                          }
  - { key: F4,                      chars: "\x1bOS"                          }
  - { key: F5,                      chars: "\x1b[15~"                        }
  - { key: F6,                      chars: "\x1b[17~"                        }
  - { key: F7,                      chars: "\x1b[18~"                        }
  - { key: F8,                      chars: "\x1b[19~"                        }
  - { key: F9,                      chars: "\x1b[20~"                        }
  - { key: F10,                     chars: "\x1b[21~"                        }
  - { key: F11,                     chars: "\x1b[23~"                        }
  - { key: F12,                     chars: "\x1b[24~"                        }
  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                       }
  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                       }
  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                       }
  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                       }
  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                      }
  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                      }
  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                      }
  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                      }
  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                      }
  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                      }
  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                      }
  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                      }
  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                       }
  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                       }
  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                       }
  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                       }
  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                      }
  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                      }
  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                      }
  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                      }
  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                      }
  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                      }
  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                      }
  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                      }
  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                       }
  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                       }
  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                       }
  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                       }
  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                      }
  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                      }
  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                      }
  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                      }
  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                      }
  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                      }
  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                      }
  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                      }
  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                       }
  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                       }
  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                       }
  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                       }
  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                      }
  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                      }
  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                      }
  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                      }
  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                      }
  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                      }
  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                      }
  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                      }
  - { key: NumpadEnter,             chars: "\n"                              }
	# Open window/pane in the same PATH
	bind c new-window -c "#{pane_current_path}"
	bind '"' split-window -c "#{pane_current_path}"
	bind % split-window -h -c "#{pane_current_path}"
	# Reload config
	bind R source-file ~/.tmux.conf \; display-message "Config reloaded..."

	# Window tab menu
	bind-key -T root MouseDown3Status display-menu -T "#[align=centre]#{window_index}:#{window_name}" -t = -x W -y S \
	"Swap Left" l "swap-window -t:-1" \
	"Swap Right" r "swap-window -t:+1" \
	"#{?pane_marked_set,,-}Swap Marked" s swap-window \
	"" \
	Kill X kill-window \
	Respawn R "respawn-window -k" \
	"#{?pane_marked,Unmark,Mark}" m "select-pane -m" \
	Rename n "command-prompt -I \"#W\" \"rename-window -- '%%'\"" \
	"" \
	"New After" w "new-window -a" \
	"New At End" W new-window

	# Window status left menu
	bind-key -T root MouseDown3StatusLeft display-menu -T "#[align=centre]#{session_name}" -t = -x M -y S \
	Next n "switch-client -n" \
	Previous p "switch-client -p" \
	"" \
	Renumber N "move-window -r" \
	Rename n "command-prompt -I \"#S\" \"rename-session -- '%%'\"" \
	"" \
	"New Session" s new-session \
	"New Window" w "new-window -c \"#{pane_current_path}\"" \

	# Window status right menu
	bind-key -T root MouseDown3StatusRight display-menu -T "#[align=centre]#{client_name}" -t = -x M -y S \
	Detach d detach-client \
	"Detach & Kill" X "detach-client -P" \
	"Detach Others" o "detach-client -a" \
	"" \
	"Save session" C-s "run-shell ~/.tmux/plugins/tmux-resurrect/scripts/save.sh" \
	"Restore session" C-r "run-shell ~/.tmux/plugins/tmux-resurrect/scripts/restore.sh" \
	"Switch to" g "run-shell ~/.tmux/plugins/tmux-sessionist/scripts/goto_session.sh" \
	"" \
	"Reload config" R "source-file ~/.tmux.conf \; display-message \"Config reloaded...\"" \
	"Install plugin" I "run-shell ~/.tmux/plugins/tpm/bindings/install_plugins" \
	"Update plugins" I "run-shell ~/.tmux/plugins/tpm/bindings/update_plugins" \
	"" \
	Lock l lock-client \

	# Pane menu
	bind-key -T root MouseDown3Pane display-menu -T "#[align=centre]#{pane_index} (#{pane_id})" -t = -x M -y M \
	"Search regexp" / "run-shell ~/.tmux/plugins/tmux-copycat/scripts/copycat_search.sh" \
	"#{?mouse_word,Search For #[underscore]#{=/9/...:mouse_word},}" C-r "copy-mode -t=; send -Xt= search-backward \"#{q:mouse_word}\"" \
	"#{?mouse_word,Type #[underscore]#{=/9/...:mouse_word},}" C-y "send-keys -l -- \"#{q:mouse_word}\"" \
	"#{?mouse_word,Copy #[underscore]#{=/9/...:mouse_word},}" c "set-buffer -- \"#{q:mouse_word}\"" \
	"#{?mouse_line,Copy Line,}" l "set-buffer -- \"#{q:mouse_line}\"" \
	"" \
	"Toggle logging" P "run-shell ~/.tmux/plugins/tmux-logging/scripts/toggle_logging.sh" \
	"Screen capture" M-p "run-shell ~/.tmux/plugins/tmux-logging/scripts/screen_capture.sh" \
	"Save history" M-P "run-shell ~/.tmux/plugins/tmux-logging/scripts/save_complete_history.sh" \
	"Clear pane history" M-c "run-shell ~/.tmux/plugins/tmux-logging/scripts/clear_history.sh" \
	"" \
	"Horizontal Split" h "split-window -h -c \"#{pane_current_path}\"" \
	"Vertical Split" v "split-window -v -c \"#{pane_current_path}\"" \
	"" \
	"Swap Up" u "swap-pane -U" \
	"Swap Down" d "swap-pane -D" \
	"#{?pane_marked_set,,-}Swap Marked" s swap-pane \
	"" \
	Kill X kill-pane \
	Respawn R "respawn-pane -k" \
	"#{?pane_marked,Unmark,Mark}" m "select-pane -m" \
	"" \
	"#{?window_zoomed_flag,Unzoom,Zoom}" z "resize-pane -Z" \

	# Use ZSH so that default shell can be changed to tmux
	set-option -g default-shell /usr/bin/zsh

	# Initialize Tmux Plugin Manager
	set -g @plugin 'tmux-plugins/tpm'
	set -g @plugin 'tmux-plugins/tmux-sensible'

	# Copying (prefix + y: command, prefix + Y: PWD)
	set -g set-clipboard external
	set -g @plugin 'tmux-plugins/tmux-yank'
	set -g @yank_action 'copy-pipe'
	set -g @yank_selection 'clipboard'
	set -g @yank_selection_mouse 'clipboard'
	# Searching (prefix + /, n, N), copying (prefix + y: command, prefix + Y: PWD)
	set -g @plugin 'tmux-plugins/tmux-copycat'
	# Logging (prefix + P: start, prefix + alt + p: dump pane, prefix + alt + P: full history to file, prefix + alt + c: clear)
	set -g @plugin 'tmux-plugins/tmux-logging'

	# Mouse support
	set-option -g mouse on
	set -g terminal-overrides 'screen*:smcup@:rmcup@'
	set -g @scroll-in-moused-over-pane 'on'
	set -g @emulate-scroll-for-no-mouse-alternate-buffer 'on'
	set -g @plugin 'nhdaly/tmux-better-mouse-mode'

	# Session management (prefix + s, prefix + r)
	set -g @plugin 'tmux-plugins/tmux-resurrect'
	# (prefix + g: ask for name and switch to it, prefix + C: create new with a name, prefix + X: killcurrent without exiting tmux, prefix + S: go back to last session, prefix + t + "/%/@: join)
	set -g @plugin 'tmux-plugins/tmux-sessionist'

	# Sidebar (prefix + tab)
	set -g @plugin 'tmux-plugins/tmux-sidebar'

	run -b '~/.tmux/plugins/tpm/tpm'
	# if you are in tmux already and want to: 1. start tmuxinator 2. switch to new session 3. exit old one
	function tmux-into() { tmuxinator start $1 --no-attatch && tmux switch -t $1 && exit }
	# Configuration for Alacritty, the GPU enhanced terminal emulator.

	# Any items in the `env` entry below will be added as
	# environment variables. Some entries may override variables
	# set by alacritty itself.
	#env:
	# TERM variable
	#
	# This value is used to set the `$TERM` environment variable for
	# each instance of Alacritty. If it is not present, alacritty will
	# check the local terminfo database and use `alacritty` if it is
	# available, otherwise `xterm-256color` is used.
	#TERM: xterm-256color

	window:
	# Window dimensions (changes require restart)
	#
	# Specified in number of columns/lines, not pixels.
	# If both are `0`, this setting is ignored.
	dimensions:
	columns: 0
	lines: 0

	# Window padding (changes require restart)
	#
	# Blank space added around the window in pixels. This padding is scaled
	# by DPI and the specified value is always added at both opposing sides.
	padding:
	x: 2
	y: 2

	# Spread additional padding evenly around the terminal content.
	dynamic_padding: false

	# Window decorations
	#
	# Values for `decorations`:
	# - full: Borders and title bar
	# - none: Neither borders nor title bar
	#
	# Values for `decorations` (macOS only):
	# - transparent: Title bar, transparent background and title bar buttons
	# - buttonless: Title bar, transparent background, but no title bar buttons
	decorations: full

	# When true, alacritty starts maximized.
	startup_mode: Maximized

	scrolling:
	# Maximum number of lines in the scrollback buffer.
	# Specifying '0' will disable scrolling.
	history: 10000

	# Number of lines the viewport will move for every line scrolled when
	# scrollback is enabled (history > 0).
	multiplier: 3

	# Faux Scrolling
	#
	# The `faux_multiplier` setting controls the number of lines the terminal
	# should scroll when the alternate screen buffer is active. This is used
	# to allow mouse scrolling for applications like `man`.
	#
	# Specifying `0` will disable faux scrolling.
	#faux_multiplier: 3

	# Font configuration (changes require restart)
	font:
	# Normal (roman) font face
	normal:
	# Font family
	#
	# Default:
	# - (macOS) Menlo
	# - (Linux) monospace
	# - (Windows) Consolas
	family: "Source Code Pro Semibold"

	# The `style` can be specified to pick a specific face.
	#style: Regular

	# Bold font face
	bold:
	# Font family
	#
	# If the bold family is not specified, it will fall back to the
	# value specified for the normal font.
	family: "Source Code Pro Semibold"

	# The `style` can be specified to pick a specific face.
	#style: Bold

	# Italic font face
	italic:
	# Font family
	#
	# If the italic family is not specified, it will fall back to the
	# value specified for the normal font.
	family: "Source Code Pro Semibold"

	# The `style` can be specified to pick a specific face.
	#style: Italic

	# Point size
	size: 13.0

	# Offset is the extra space around each character. `offset.y` can be thought of
	# as modifying the line spacing, and `offset.x` as modifying the letter spacing.
	offset:
	x: 0
	y: 0

	# Glyph offset determines the locations of the glyphs within their cells with
	# the default being at the bottom. Increasing `x` moves the glyph to the right,
	# increasing `y` moves the glyph upwards.
	glyph_offset:
	x: 0
	y: 0

	# Thin stroke font rendering (macOS only)
	#
	# Thin strokes are suitable for retina displays, but for non-retina screens
	# it is recommended to set `use_thin_strokes` to `false`
	#
	# macOS >= 10.14.x:
	#
	# If the font quality on non-retina display looks bad then set
	# `use_thin_strokes` to `true` and enable font smoothing by running the
	# following command:
	# `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
	#
	# This is a global setting and will require a log out or restart to take
	# effect.
	use_thin_strokes: true

	# Display the time it takes to redraw each frame.
	#render_timer: false

	# Keep the log file after quitting Alacritty.
	#persistent_logging: false

	# If `true`, bold text is drawn using the bright color variants.
	draw_bold_text_with_bright_colors: true

	# Colors (Tomorrow Night Bright)
	colors:
	# Default colors
	primary:
	background: '0x1e1e1e'
	foreground: '0xa7a7a7'

	# Bright and dim foreground colors
	#
	# The dimmed foreground color is calculated automatically if it is not present.
	# If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
	# is `false`, the normal foreground color will be used.
	#dim_foreground: '0x9a9a9a'
	#bright_foreground: '0xffffff'

	# Cursor colors
	#
	# Colors which should be used to draw the terminal cursor. If these are unset,
	# the cursor color will be the inverse of the cell color.
	cursor:
	text: '0x1e1e1e'
	cursor: '0xa7a7a7'

	# Normal colors
	normal:
	black: '0x1e1e1e'
	red: '0xcf6a4c'
	green: '0x8f9d6a'
	yellow: '0xf9ee98'
	blue: '0x7587a6'
	magenta: '0x9b859d'
	cyan: '0xafc4db'
	white: '0xa7a7a7'

	# Bright colors
	bright:
	black: '0x5f5a60'
	red: '0xcf6a4c'
	green: '0x8f9d6a'
	yellow: '0xf9ee98'
	blue: '0x7587a6'
	magenta: '0x9b859d'
	cyan: '0xafc4db'
	white: '0xa7a7a7'

	# Dim colors
	#
	# If the dim colors are not set, they will be calculated automatically based
	# on the `normal` colors.
	#dim:
	# black: '0x000000'
	# red: '0x8c3336'
	# green: '0x7a8530'
	# yellow: '0x97822e'
	# blue: '0x506d8f'
	# magenta: '0x80638e'
	# cyan: '0x497e7a'
	# white: '0x9a9a9a'

	# Indexed Colors
	#
	# The indexed colors include all colors from 16 to 256.
	# When these are not set, they're filled with sensible defaults.
	#
	# Example:
	# `- { index: 16, color: '0xff00ff' }`
	#
	indexed_colors: []

	# Visual Bell
	#
	# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
	# rung, the terminal background will be set to white and transition back to the
	# default background color. You can control the rate of this transition by
	# setting the `duration` property (represented in milliseconds). You can also
	# configure the transition function by setting the `animation` property.
	#
	# Values for `animation`:
	# - Ease
	# - EaseOut
	# - EaseOutSine
	# - EaseOutQuad
	# - EaseOutCubic
	# - EaseOutQuart
	# - EaseOutQuint
	# - EaseOutExpo
	# - EaseOutCirc
	# - Linear
	#
	# Specifying a `duration` of `0` will disable the visual bell.
	visual_bell:
	animation: EaseOutExpo
	duration: 0
	color: '0xffffff'

	# Background opacity
	#
	# Window opacity as a floating point number from `0.0` to `1.0`.
	# The value `0.0` is completely transparent and `1.0` is opaque.
	background_opacity: 0.95

	# Mouse bindings
	#
	# Available fields:
	# - mouse
	# - action
	# - mods (optional)
	#
	# Values for `mouse`:
	# - Middle
	# - Left
	# - Right
	# - Numeric identifier such as `5`
	#
	# All available `mods` and `action` values are documented in the key binding
	# section.
	mouse_bindings:
	- { mouse: Middle, action: PasteSelection }

	mouse:
	# Click settings
	#
	# The `double_click` and `triple_click` settings control the time
	# alacritty should wait for accepting multiple clicks as one double
	# or triple click.
	double_click: { threshold: 300 }
	triple_click: { threshold: 300 }

	# If this is `true`, the cursor is temporarily hidden when typing.
	hide_when_typing: false

	url:
	# URL launcher
	#
	# This program is executed when clicking on a text which is recognized as a URL.
	# The URL is always added to the command as the last parameter.
	#
	# When set to `None`, URL launching will be disabled completely.
	#
	# Default:
	# - (macOS) open
	# - (Linux) xdg-open
	# - (Windows) explorer
	#launcher: xdg-open

	# URL modifiers
	#
	# These are the modifiers that need to be held down for opening URLs when clicking
	# on them. The available modifiers are documented in the key binding section.
	modifiers: None

	selection:
	semantic_escape_chars: ",│`\|:\"' ()[]{}<>"

	# When set to `true`, selected text will be copied to the primary clipboard.
	save_to_clipboard: false

	# Allow terminal applications to change Alacritty's window title.
	dynamic_title: true

	cursor:
	# Cursor style
	#
	# Values for `style`:
	# - ▇ Block
	# - _ Underline
	# - \| Beam
	style: Beam

	# If this is `true`, the cursor will be rendered as a hollow box when the
	# window is not focused.
	unfocused_hollow: true

	# Live config reload (changes require restart)
	live_config_reload: true

	# Shell
	#
	# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
	# Entries in `shell.args` are passed unmodified as arguments to the shell.
	#
	# Default:
	# - (Linux/macOS) /bin/bash --login
	# - (Windows) powershell
	shell:
	program: /bin/tmux
	# args:
	# - --login

	# Windows 10 ConPTY backend (Windows only)
	#
	# This will enable better color support and may resolve other issues,
	# however this API and its implementation is still young and so is
	# disabled by default, as stability may not be as good as the winpty
	# backend.
	#
	# Alacritty will fall back to the WinPTY automatically if the ConPTY
	# backend cannot be initialized.
	enable_experimental_conpty_backend: false

	# Send ESC (\x1b) before characters when alt is pressed.
	alt_send_esc: true

	# Key bindings
	#
	# Key bindings are specified as a list of objects. Each binding will specify a
	# key and modifiers required to trigger it, terminal modes where the binding is
	# applicable, and what should be done when the key binding fires. It can either
	# send a byte sequence to the running application (`chars`), execute a
	# predefined action (`action`) or fork and execute a specified command plus
	# arguments (`command`).
	#
	# Bindings are always filled by default, but will be replaced when a new binding
	# with the same triggers is defined. To unset a default binding, it can be
	# mapped to the `None` action.
	#
	# Example:
	# `- { key: V, mods: Control\|Shift, action: Paste }`
	#
	# Available fields:
	# - key
	# - mods (optional)
	# - chars \| action \| command (exactly one required)
	# - mode (optional)
	#
	# Values for `key`:
	# - `A` -> `Z`
	# - `F1` -> `F12`
	# - `Key1` -> `Key0`
	#
	# A full list with available key codes can be found here:
	# https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
	#
	# Instead of using the name of the keys, the `key` field also supports using
	# the scancode of the desired key. Scancodes have to be specified as a
	# decimal number.
	# This command will allow you to display the hex scancodes for certain keys:
	# `showkey --scancodes`
	#
	# Values for `mods`:
	# - Command
	# - Control
	# - Super
	# - Shift
	# - Alt
	#
	# Multiple `mods` can be combined using `\|` like this: `mods: Control\|Shift`.
	# Whitespace and capitalization is relevant and must match the example.
	#
	# Values for `chars`:
	# The `chars` field writes the specified string to the terminal. This makes
	# it possible to pass escape sequences.
	# To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
	# the command `showkey -a` outside of tmux.
	# Note that applications use terminfo to map escape sequences back to
	# keys. It is therefore required to update the terminfo when
	# changing an escape sequence.
	#
	# Values for `action`:
	# - Paste
	# - PasteSelection
	# - Copy
	# - IncreaseFontSize
	# - DecreaseFontSize
	# - ResetFontSize
	# - ScrollPageUp
	# - ScrollPageDown
	# - ScrollToTop
	# - ScrollToBottom
	# - ClearHistory
	# - Hide
	# - Quit
	# - ClearLogNotice
	# - SpawnNewInstance
	# - None
	#
	# Values for `command`:
	# The `command` field must be a map containing a `program` string and
	# an `args` array of command line parameter strings.
	#
	# Example:
	# `command: { program: "alacritty", args: ["-e", "vttest"] }`
	#
	# Values for `mode`:
	# - ~AppCursor
	# - AppCursor
	# - ~AppKeypad
	# - AppKeypad
	key_bindings:
	# (Windows/Linux only)
	#- { key: V, mods: Control\|Shift, action: Paste }
	#- { key: C, mods: Control\|Shift, action: Copy }
	#- { key: Insert, mods: Shift, action: PasteSelection }
	#- { key: Key0, mods: Control, action: ResetFontSize }
	#- { key: Equals, mods: Control, action: IncreaseFontSize }
	#- { key: Subtract, mods: Control, action: DecreaseFontSize }

	# (macOS only)
	#- { key: Key0, mods: Command, action: ResetFontSize }
	#- { key: Equals, mods: Command, action: IncreaseFontSize }
	#- { key: Minus, mods: Command, action: DecreaseFontSize }
	#- { key: K, mods: Command, action: ClearHistory }
	#- { key: K, mods: Command, chars: "\x0c" }
	#- { key: V, mods: Command, action: Paste }
	#- { key: C, mods: Command, action: Copy }
	#- { key: H, mods: Command, action: Hide }
	#- { key: Q, mods: Command, action: Quit }
	#- { key: W, mods: Command, action: Quit }

	- { key: Paste, action: Paste }
	- { key: Copy, action: Copy }
	- { key: L, mods: Control, action: ClearLogNotice }
	- { key: L, mods: Control, chars: "\x0c" }
	- { key: Home, chars: "\x1bOH", mode: AppCursor }
	- { key: Home, chars: "\x1b[H", mode: ~AppCursor }
	- { key: End, chars: "\x1bOF", mode: AppCursor }
	- { key: End, chars: "\x1b[F", mode: ~AppCursor }
	- { key: PageUp, mods: Shift, action: ScrollPageUp, mode: ~Alt }
	- { key: PageUp, mods: Shift, chars: "\x1b[5;2~", mode: Alt }
	- { key: PageUp, mods: Control, chars: "\x1b[5;5~" }
	- { key: PageUp, chars: "\x1b[5~" }
	- { key: PageDown, mods: Shift, action: ScrollPageDown, mode: ~Alt }
	- { key: PageDown, mods: Shift, chars: "\x1b[6;2~", mode: Alt }
	- { key: PageDown, mods: Control, chars: "\x1b[6;5~" }
	- { key: PageDown, chars: "\x1b[6~" }
	- { key: Tab, mods: Shift, chars: "\x1b[Z" }
	- { key: Back, chars: "\x7f" }
	- { key: Back, mods: Alt, chars: "\x1b\x7f" }
	- { key: Insert, chars: "\x1b[2~" }
	- { key: Delete, chars: "\x1b[3~" }
	- { key: Left, mods: Shift, chars: "\x1b[1;2D" }
	- { key: Left, mods: Control, chars: "\x1b[1;5D" }
	- { key: Left, mods: Alt, chars: "\x1b[1;3D" }
	- { key: Left, chars: "\x1b[D", mode: ~AppCursor }
	- { key: Left, chars: "\x1bOD", mode: AppCursor }
	- { key: Right, mods: Shift, chars: "\x1b[1;2C" }
	- { key: Right, mods: Control, chars: "\x1b[1;5C" }
	- { key: Right, mods: Alt, chars: "\x1b[1;3C" }
	- { key: Right, chars: "\x1b[C", mode: ~AppCursor }
	- { key: Right, chars: "\x1bOC", mode: AppCursor }
	- { key: Up, mods: Shift, chars: "\x1b[1;2A" }
	- { key: Up, mods: Control, chars: "\x1b[1;5A" }
	- { key: Up, mods: Alt, chars: "\x1b[1;3A" }
	- { key: Up, chars: "\x1b[A", mode: ~AppCursor }
	- { key: Up, chars: "\x1bOA", mode: AppCursor }
	- { key: Down, mods: Shift, chars: "\x1b[1;2B" }
	- { key: Down, mods: Control, chars: "\x1b[1;5B" }
	- { key: Down, mods: Alt, chars: "\x1b[1;3B" }
	- { key: Down, chars: "\x1b[B", mode: ~AppCursor }
	- { key: Down, chars: "\x1bOB", mode: AppCursor }
	- { key: F1, chars: "\x1bOP" }
	- { key: F2, chars: "\x1bOQ" }
	- { key: F3, chars: "\x1bOR" }
	- { key: F4, chars: "\x1bOS" }
	- { key: F5, chars: "\x1b[15~" }
	- { key: F6, chars: "\x1b[17~" }
	- { key: F7, chars: "\x1b[18~" }
	- { key: F8, chars: "\x1b[19~" }
	- { key: F9, chars: "\x1b[20~" }
	- { key: F10, chars: "\x1b[21~" }
	- { key: F11, chars: "\x1b[23~" }
	- { key: F12, chars: "\x1b[24~" }
	- { key: F1, mods: Shift, chars: "\x1b[1;2P" }
	- { key: F2, mods: Shift, chars: "\x1b[1;2Q" }
	- { key: F3, mods: Shift, chars: "\x1b[1;2R" }
	- { key: F4, mods: Shift, chars: "\x1b[1;2S" }
	- { key: F5, mods: Shift, chars: "\x1b[15;2~" }
	- { key: F6, mods: Shift, chars: "\x1b[17;2~" }
	- { key: F7, mods: Shift, chars: "\x1b[18;2~" }
	- { key: F8, mods: Shift, chars: "\x1b[19;2~" }
	- { key: F9, mods: Shift, chars: "\x1b[20;2~" }
	- { key: F10, mods: Shift, chars: "\x1b[21;2~" }
	- { key: F11, mods: Shift, chars: "\x1b[23;2~" }
	- { key: F12, mods: Shift, chars: "\x1b[24;2~" }
	- { key: F1, mods: Control, chars: "\x1b[1;5P" }
	- { key: F2, mods: Control, chars: "\x1b[1;5Q" }
	- { key: F3, mods: Control, chars: "\x1b[1;5R" }
	- { key: F4, mods: Control, chars: "\x1b[1;5S" }
	- { key: F5, mods: Control, chars: "\x1b[15;5~" }
	- { key: F6, mods: Control, chars: "\x1b[17;5~" }
	- { key: F7, mods: Control, chars: "\x1b[18;5~" }
	- { key: F8, mods: Control, chars: "\x1b[19;5~" }
	- { key: F9, mods: Control, chars: "\x1b[20;5~" }
	- { key: F10, mods: Control, chars: "\x1b[21;5~" }
	- { key: F11, mods: Control, chars: "\x1b[23;5~" }
	- { key: F12, mods: Control, chars: "\x1b[24;5~" }
	- { key: F1, mods: Alt, chars: "\x1b[1;6P" }
	- { key: F2, mods: Alt, chars: "\x1b[1;6Q" }
	- { key: F3, mods: Alt, chars: "\x1b[1;6R" }
	- { key: F4, mods: Alt, chars: "\x1b[1;6S" }
	- { key: F5, mods: Alt, chars: "\x1b[15;6~" }
	- { key: F6, mods: Alt, chars: "\x1b[17;6~" }
	- { key: F7, mods: Alt, chars: "\x1b[18;6~" }
	- { key: F8, mods: Alt, chars: "\x1b[19;6~" }
	- { key: F9, mods: Alt, chars: "\x1b[20;6~" }
	- { key: F10, mods: Alt, chars: "\x1b[21;6~" }
	- { key: F11, mods: Alt, chars: "\x1b[23;6~" }
	- { key: F12, mods: Alt, chars: "\x1b[24;6~" }
	- { key: F1, mods: Super, chars: "\x1b[1;3P" }
	- { key: F2, mods: Super, chars: "\x1b[1;3Q" }
	- { key: F3, mods: Super, chars: "\x1b[1;3R" }
	- { key: F4, mods: Super, chars: "\x1b[1;3S" }
	- { key: F5, mods: Super, chars: "\x1b[15;3~" }
	- { key: F6, mods: Super, chars: "\x1b[17;3~" }
	- { key: F7, mods: Super, chars: "\x1b[18;3~" }
	- { key: F8, mods: Super, chars: "\x1b[19;3~" }
	- { key: F9, mods: Super, chars: "\x1b[20;3~" }
	- { key: F10, mods: Super, chars: "\x1b[21;3~" }
	- { key: F11, mods: Super, chars: "\x1b[23;3~" }
	- { key: F12, mods: Super, chars: "\x1b[24;3~" }
	- { key: NumpadEnter, chars: "\n" }