-
-
Save PathogenDavid/20b9dcb640d6bbb4f27b6811ad8ae9fe to your computer and use it in GitHub Desktop.
Verbose dmesg output from pfSense guest that can't see the passed-through NICs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Event timer "RTC" frequency 32768 Hz quality 0 | |
| ACPI timer: 1/104 1/64 1/2 1/33 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 | |
| Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 | |
| acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 | |
| pci_link0: Index IRQ Rtd Ref IRQs | |
| Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 14 15 | |
| Validation 0 11 N 0 3 4 5 7 9 10 11 12 14 15 | |
| After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| pci_link1: Index IRQ Rtd Ref IRQs | |
| Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| pci_link2: Index IRQ Rtd Ref IRQs | |
| Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| pci_link3: Index IRQ Rtd Ref IRQs | |
| Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 | |
| pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
| pcib0: Length mismatch for 3 range: 20000000 vs 1fffffff | |
| pcib0: decoding 3 range 0xfe0000000-0xfffffffff | |
| pcib0: decoding 5 range 0-0xff | |
| pcib0: decoding 4 range 0-0xcf7 | |
| pcib0: decoding 4 range 0xd00-0xffff | |
| pcib0: decoding 3 range 0xa0000-0xbffff | |
| pcib0: decoding 3 range 0xf8000000-0xfffbffff | |
| ACPI: Found matching pin for 0.8.INTA at func 0: 11 | |
| pci0: <ACPI PCI bus> on pcib0 | |
| pci0: domain=0, physical bus=0 | |
| found-> vendor=0x8086, dev=0x7192, revid=0x03 | |
| domain=0, bus=0, slot=0, func=0 | |
| class=06-00-00, hdrtype=0x00, mfdev=0 | |
| cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| found-> vendor=0x8086, dev=0x7110, revid=0x01 | |
| domain=0, bus=0, slot=7, func=0 | |
| class=06-01-00, hdrtype=0x00, mfdev=1 | |
| cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| found-> vendor=0x8086, dev=0x7111, revid=0x01 | |
| domain=0, bus=0, slot=7, func=1 | |
| class=01-01-80, hdrtype=0x00, mfdev=0 | |
| cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:7:1 | |
| pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:7:1 | |
| pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:7:1 | |
| pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:7:1 | |
| map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled | |
| pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:7:1 | |
| found-> vendor=0x8086, dev=0x7113, revid=0x02 | |
| domain=0, bus=0, slot=7, func=3 | |
| class=06-80-00, hdrtype=0x00, mfdev=0 | |
| cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| intpin=a, irq=255 | |
| found-> vendor=0x1414, dev=0x5353, revid=0x00 | |
| domain=0, bus=0, slot=8, func=0 | |
| class=03-00-00, hdrtype=0x00, mfdev=0 | |
| cmdreg=0x011f, statreg=0x0000, cachelnsz=0 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| intpin=a, irq=11 | |
| map[10]: type Memory, range 32, base 0xf8000000, size 26, enabled | |
| pcib0: allocated type 3 (0xf8000000-0xfbffffff) for rid 10 of pci0:0:8:0 | |
| pcib0: matched entry for 0.8.INTA (src \134_SB_.LNKA:0) | |
| ioapic0: Changing trigger for pin 11 to level | |
| ioapic0: Changing polarity for pin 11 to low | |
| pcib0: slot 8 INTA routed to irq 11 via \134_SB_.LNKA | |
| isab0: <PCI-ISA bridge> at device 7.0 on pci0 | |
| isa0: <ISA bus> on isab0 | |
| atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 | |
| ata0: <Hyper-V ATA storage disengage driver> at channel 0 on atapci0 | |
| ata1: <ATA channel> at channel 1 on atapci0 | |
| ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 | |
| pci0: <bridge> at device 7.3 (no driver attached) | |
| vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff irq 11 at device 8.0 on pci0 | |
| vgapci0: Boot video device | |
| atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 | |
| atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
| atkbd: the current kbd controller command byte 0065 | |
| atkbd: keyboard ID 0x41ab (2) | |
| kbdc: RESET_KBD return code:00fa | |
| kbdc: RESET_KBD status:00aa | |
| kbd0 at atkbd0 | |
| kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 | |
| ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 52 | |
| atkbd0: [GIANT-LOCKED] | |
| psm0: unable to allocate IRQ | |
| psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 | |
| psm0: current command byte:0065 | |
| kbdc: TEST_AUX_PORT status:0000 | |
| kbdc: RESET_AUX return code:00fa | |
| kbdc: RESET_AUX status:00aa | |
| kbdc: RESET_AUX ID:0000 | |
| kbdc: RESET_AUX return code:00fa | |
| kbdc: RESET_AUX status:00aa | |
| kbdc: RESET_AUX ID:0000 | |
| psm: status 02 02 64 | |
| psm: status 02 00 64 | |
| psm: status 02 03 64 | |
| psm: status 02 03 64 | |
| psm: data 08 00 00 | |
| psm: status 02 02 64 | |
| psm0: <PS/2 Mouse> irq 12 on atkbdc0 | |
| ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 53 | |
| psm0: [GIANT-LOCKED] | |
| psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons | |
| psm0: config:00000000, flags:00000008, packet size:4 | |
| psm0: syncmask:08, syncbits:00 | |
| uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 | |
| ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54 | |
| uart0: fast interrupt | |
| uart0: PPS capture mode: DCDinvalid | |
| uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 | |
| ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 55 | |
| uart1: fast interrupt | |
| uart1: PPS capture mode: DCDinvalid | |
| fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 | |
| fdc0: ic_type 90 part_id 01 | |
| ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 56 | |
| fd0: <1440-KB 3.5" drive> on fdc0 drive 0 | |
| vmbus0: <Vmbus Devices> irq 5,7 on acpi0 | |
| vmbus0: VMBUS: attach dev: 0xfffff800034d2600 | |
| ACPI: Enabled 1 GPEs in block 00 to 0F | |
| qpi0: <QPI system bus> on motherboard | |
| acpi0: wakeup code va 0xfffffe003ccef000 pa 0x4000 | |
| ex_isa_identify() | |
| ahc_isa_identify 0: ioport 0xc00 alloc failed | |
| ahc_isa_identify 1: ioport 0x1c00 alloc failed | |
| ahc_isa_identify 2: ioport 0x2c00 alloc failed | |
| ahc_isa_identify 3: ioport 0x3c00 alloc failed | |
| ahc_isa_identify 4: ioport 0x4c00 alloc failed | |
| ahc_isa_identify 5: ioport 0x5c00 alloc failed | |
| ahc_isa_identify 6: ioport 0x6c00 alloc failed | |
| ahc_isa_identify 7: ioport 0x7c00 alloc failed | |
| ahc_isa_identify 8: ioport 0x8c00 alloc failed | |
| ahc_isa_identify 9: ioport 0x9c00 alloc failed | |
| ahc_isa_identify 10: ioport 0xac00 alloc failed | |
| ahc_isa_identify 11: ioport 0xbc00 alloc failed | |
| ahc_isa_identify 12: ioport 0xcc00 alloc failed | |
| ahc_isa_identify 13: ioport 0xdc00 alloc failed | |
| ahc_isa_identify 14: ioport 0xec00 alloc failed | |
| pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 | |
| pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 | |
| isa_probe_children: disabling PnP devices | |
| atkbdc: atkbdc0 already exists; skipping it | |
| atrtc: atrtc0 already exists; skipping it | |
| attimer: attimer0 already exists; skipping it | |
| fdc: fdc0 already exists; skipping it | |
| sc: sc0 already exists; skipping it | |
| uart: uart0 already exists; skipping it | |
| uart: uart1 already exists; skipping it | |
| isa_probe_children: probing non-PnP devices | |
| orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0 | |
| sc0: <System console> at flags 0x100 on isa0 | |
| sc0: VGA <16 virtual consoles, flags=0x300> | |
| sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) | |
| vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | |
| pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 | |
| pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 | |
| ppc0: cannot reserve I/O port range | |
| ppc0 failed to probe at irq 7 on isa0 | |
| wbwd0 failed to probe on isa0 | |
| isa_probe_children: probing PnP devices | |
| Device configuration finished. | |
| procfs registered | |
| lapic: Divisor 2, Frequency 100001130 Hz | |
| Timecounters tick every 1.000 msec | |
| pflog0: bpf attached | |
| crypto: <crypto device> | |
| vlan: initialized, using hash tables with chaining | |
| tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192 | |
| IPsec: Initialized Security Association Processing. | |
| pfsync0: bpf attached | |
| enc0: bpf attached | |
| lo0: bpf attached | |
| hpt27xx: no controller detected. | |
| hptrr: no controller detected. | |
| hptnr: no controller detected. | |
| ata1: reset tp1 mask=03 ostat0=50 ostat1=7f | |
| ata1: stat0=0x50 err=0x01 lsb=0x14 msb=0xeb | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 | |
| ata1: reset tp2 stat0=50 stat1=ff devices=0x10000 | |
| pass0 at ata1 bus 0 scbus0 target 0 lun 0 | |
| pass0: <Msft Virtual CD/ROM 1.0> Removable CD-ROM SPC-3 SCSI device | |
| pass0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) | |
| cd0 at ata1 bus 0 scbus0 target 0 lun 0 | |
| cd0: <Msft Virtual CD/ROM 1.0> Removable CD-ROM SPC-3 SCSI device | |
| cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) | |
| cd0: Attempt to query device size failed: NOT READY, Medium not present | |
| random: unblocking device. | |
| SMP: AP CPU #7 Launched! | |
| cpu7 AP: | |
| ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
| lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff | |
| timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
| SMP: AP CPU #3 Launched! | |
| cpu3 AP: | |
| ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
| lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff | |
| timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
| SMP: AP CPU #6 Launched! | |
| cpu6 AP: | |
| ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
| lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff | |
| timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
| SMP: AP CPU #5 Launched! | |
| cpu5 AP: | |
| ID: 0x05000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
| lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff | |
| timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
| SMP: AP CPU #2 Launched! | |
| cpu2 AP: | |
| ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
| lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff | |
| timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
| SMP: AP CPU #1 Launched! | |
| cpu1 AP: | |
| ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
| lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff | |
| timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
| SMP: AP CPU #4 Launched! | |
| cpu4 AP: | |
| ID: 0x04000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff | |
| lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff | |
| timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 | |
| ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 | |
| ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 2 vector 48 | |
| ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 3 vector 48 | |
| ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 4 vector 48 | |
| ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 5 vector 48 | |
| ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 48 | |
| ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 7 vector 48 | |
| TSC timecounter discards lower 1 bit(s) | |
| Timecounter "TSC-low" frequency 1130501179 Hz quality -100 | |
| Event timer "HyperV" frequency 10000000 Hz quality 1000 | |
| VMBUS: vmbus callback vector 254 | |
| VMBUS: Calling smp_rendezvous, smp_started = 1 | |
| VMBUS: Protocol Version: 3.0 | |
| VMBUS: Class ID: dc7450528589e2468057a307dc18a502 | |
| VMBUS: Total online cpus 8, assign perf channel 1 to vcpu 1, cpu 1 | |
| VMBUS: Class ID: 32264132cb86a2449b5c50d1417354f5 | |
| storvsc0: DRIVER_BLKVSC-Emulated ATA/IDE probe | |
| storvsc0: Enlightened ATA/IDE detected | |
| storvsc0: DRIVER_BLKVSC-Emulated ATA/IDE probe | |
| storvsc0: Enlightened ATA/IDE detected | |
| storvsc0 on vmbus0 | |
| VMBUS: channel <0xfffff8000376a400> open success. | |
| VMBUS: Class ID: 1657e6f8b33c064a9a601889c5cccab5 | |
| (probe0:blkvsc0:0:0:0): Down reving Protocol Version from 4 to 2? | |
| (probe1:blkvsc0:0:1:0): Down reving Protocol Version from 4 to 2? | |
| (probe0:VMBUS: Class ID: 9eb6a8cf4a5bc04cb98b8ba1a1f3f95a | |
| blkvsc0:0:0:0): storvsc has passed inquiry response (36) validation | |
| (probe1:blkvsc0:0:1:0): storvsc uninstalled invalid device [7f 0 5 2 1f] | |
| VMBUS: Class ID: 6dad12f9172bea48bd65f927a61c7684 | |
| (probe0:VMBUS: Class ID: 02780ada77e3ac4a8e770558eb1073f8 | |
| blkvsc0:0:0:0): storvsc scsi_status = 2 | |
| (probe0:VMBUS: Class ID: f4ba7533159e304bb76567acb10d607b | |
| blkvsc0:0:0:0): storvsc skips the validation for short inquiry (5) [0 0 0 8 0] | |
| (probe0:VMBUS: Class ID: 394f16571591784eab55382f3bd5422d | |
| blkvsc0:0:0:0): storvsc skips the validation for short inquiry (6) [0 83 0 30 1] | |
| hyperv-utils0 on vmbus0 | |
| hyperv-utils0: Hyper-V Service attaching: Hyper-V Heartbeat Service | |
| pass1 at blkvsc0 bus 0 scbus1 target 0 lun 0 | |
| pass1: <Msft Virtual Disk 1.0> Fixed Direct Access SPC-3 SCSI device | |
| pass1: 300.000MB/s transfers | |
| pass1: Command Queueing enabled | |
| VMBUS: channel <0xfffff8000582a400> open success. | |
| VMBUS: Class ID: e7f4a0a9455a964db8278a841e8c03e6 | |
| hyperv-utils1 on vmbus0 | |
| hyperv-utils1: Hyper-V Service attaching: Hyper-V KVP Service | |
| da0 at blkvsc0 bus 0 scbus1 target 0 lun 0 | |
| da0: <Msft Virtual Disk 1.0> Fixed Direct Access SPC-3 SCSI device | |
| da0: 300.000MB/s transfers | |
| da0: Command Queueing enabled | |
| da0: 16384MB (33554432 512 byte sectors) | |
| (da0:blkvsc0:0:0:0): storvsc skips the validation for short inquiry (6) [0 b2 0 4 1] | |
| (da0:blkvsc0:0:0:0): storvsc skips the validation for short inquiry (5) [0 b0 0 3c 0] | |
| (da0:blkvsc0:0:0:0): storvsc skips the validation for short inquiry (5) [0 b1 0 3c 0] | |
| da0: Delete methods: <UNMAP(*),ZERO> | |
| VMBUS: channel <0xfffff8000582a000> open success. | |
| VMBUS: Class ID: 31600b0e13523449818b38d90ced39db | |
| hyperv-utils2 on vmbus0 | |
| hyperv-utils2: Hyper-V Service attaching: Hyper-V Shutdown Service | |
| VMBUS: channel <0xfffff8000586c800> open success. | |
| VMBUS: Class ID: 30e62795aed07b49adcee80ab0175caf | |
| hyperv-utils3 on vmbus0 | |
| hyperv-utils3: Hyper-V Service attaching: Hyper-V Time Synch Service | |
| VMBUS: channel <0xfffff8000586c000> open success. | |
| VMBUS: Class ID: 292efa3523ea364296ae3a6ebacba440 | |
| VMBUS: Class ID: f4ac6a2715ac6c4298dd7521ad3f01fe | |
| VMBUS: Class ID: 1df6c444444400449d52802e27ede19f | |
| VMBUS: Class ID: 1df6c444444400449d52802e27ede19f | |
| VMBUS: Total online cpus 8, assign perf channel 0 to vcpu 2, cpu 2 | |
| VMBUS: Class ID: 635161f83edfc546913ff2d2f965ed0e | |
| Netvsc probe... DONE | |
| Netvsc probe... DONE | |
| hn0: <Synthetic Network Interface> on vmbus0 | |
| VMBUS: channel <0xfffff800058a0800> open success. | |
| hn0: Netvsc: got version 0x50000 | |
| hn0: unknown status 1073872902 received | |
| hn0: unknown status 1073872902 received | |
| hn0: hv send offload request succeeded | |
| hn0: Using defaults for TSO: 65518/35/2048 | |
| hn0: bpf attached | |
| hn0: Ethernet address: zz:zz:zz:zz:zz:zz | |
| GEOM: new disk cd0 | |
| GEOM: new disk da0 | |
| GEOM_PART: partition 1 on (da0, MBR) is not aligned on 4096 bytes | |
| GEOM_PART: partition 1 on (da0s1, BSD) is not aligned on 4096 bytes | |
| Trying to mount root from ufs:/dev/ufsid/59b24b771c300211 [rw]... | |
| WARNING: / was not properly dismounted | |
| start_init: trying /sbin/init | |
| hn0: link state changed to UP |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment