Skip to content

Instantly share code, notes, and snippets.

@PowerBall253
Last active December 10, 2023 05:55
  • Star 103 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
Star You must be signed in to star a gist
Embed
What would you like to do?
Screen sharing on Hyprland (Arch Linux)

Screen sharing on Hyprland (Arch Linux)

Table of contents

Introduction

This guide will go through the setup and troubleshooting steps required to get screen sharing working on OBS with the Hyprland compositor.

This guide will use the yay AUR helper for AUR package installation, but the commands should be similar for other helpers such as paru.

WARNING: This guide demands that the user has a basic understanding on installing packages (both official and AUR), using git, compiling from source, and some patience.

Install PipeWire and friends

First, we need to install pipewire and wireplumber. To do that, run the following command:

sudo pacman -S pipewire wireplumber

Install xdg-desktop-portal and friends

Option #1: xdg-desktop-portal-hyprland (recommended)

We will install the xdg-desktop-portal-hyprland-git package from the AUR, which provides additional functionality such as window sharing. With an AUR helper such as yay, you can install it this way:

yay -S xdg-desktop-portal-hyprland-git

Option #2: xdg-desktop-portal-wlr (not recommended)

This option provides less options than xdg-desktop-portal-wlr, but it will still allow fullscreen sharing. Install it running the following command:

sudo pacman -S xdg-desktop-portal-wlr

WARNING: The rest of this guide will assume xdg-desktop-portal-hyprland was choosed. If you picked this option, replace any -hyprland mentions for -wlr in the rest of this guide.

Remove other portal implementations

Make sure you don't have any other xdg-desktop-portal-* packages installed (except possibly xdg-desktop-portal-gtk for file dialogs), as this could cause problems later. To check if you have any, run the following command:

pacman -Q | grep xdg-desktop-portal-

then delete all of the listed packages except the -hyprland one we just installed and the -gtk one if you so chose.

Also make sure to install the optional dependencies grim and slurp:

sudo pacman -S grim slurp

Editing the configuration file

Open your Hyprland config file (usually located at ~/.config/hypr/hyprland.conf) with a text editor, and add the following line at the end:

exec-once=dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP

This will make sure that xdg-desktop-portal-hyprland can get the required variables on startup.

Restart your session

Now log out and then log back in, or reboot your system. Once you're back into Hyprland, try sharing in OBS with the "Screen Capture (PipeWire)" option.

If it works, congratulations! You may exit this guide now. If not, follow along:

Troubleshooting PipeWire

Make sure both pipewire and wireplumber are running. Run the following command:

systemctl --user status pipewire wireplumber

This should return "active (running)" for both. If it doesn't, follow the Arch Wiki article for troubleshooting.

Troubleshooting desktop portal

Run the following command to check for errors in xdg-desktop-portal-hyprland:

systemctl --user status xdg-desktop-portal-hyprland

This should return "active (running)". If it doesn't, check the errors it gives you. Here's some workarounds for common errors:

Portal service (wlroots implementation) was skipped because of a failed condition check

Make sure you added the required line to the Hyprland configuration. Check for typos.

unsupported wl_shm format 0x34324742 (after trying to share the screen on NVIDIA)

Install the modified hyprland-nvidia-git AUR package:

yay -S hyprland-nvidia-git

Alternatively, you can modify the source code manually:

We'll need to modify the wlroots submodule source code to make it choose a viable format.

First, clone the Hyprland repo if you haven't already:

git clone --recursive https://github.com/vaxerski/Hyprland

Then, install all required dependencies for building, as specified in the wiki:

sudo pacman -S gdb ninja gcc cmake libxcb xcb-proto xcb-util xcb-util-keysyms libxfixes libx11 libxcomposite xorg-xinput libxrender pixman wayland-protocols cairo pango --needed

Open the wlroots/types/output/render.c file, look for the wlr_output_preferred_read_format, and replace it with the following:

uint32_t wlr_output_preferred_read_format(struct wlr_output *output) {
    return DRM_FORMAT_XRGB8888;
}

Afterwards, compile and install by running sudo make install, then restart your session.

Troubleshooting OBS

You can try the wlrobs-hg plugin.

Troubleshooting your browser

If you're trying to share your screen in your browser, first make sure that it supports Wayland and screen sharing on it, else it will not work.

Firefox

Make sure you're running on Wayland. To do this, go to about:support, look for "Window Protocol", and make sure it is set to "wayland". If it isn't, set the environment variable MOZ_ENABLE_WAYLAND=1 in an environment file, like /etc/environment, /etc/profile, ~/.bash_profile, ~/.zshenv, etc.

If it still doesn't work, open about:config and make sure the media.peerconnection.enabled flag is set to true.

Chromium

To run on Wayland, set the --ozone-platform-hint=auto flag in the chromium flags file (~/.config/chromium-flags.conf for the default package, ~/.config/chrome-flags.conf for Chrome).

Also ensure the "WebRTC PipeWire support" flag is enabled by opening chrome://flags/#enable-webrtc-pipewire-capturer and enabling it.

Troubleshooting your app

Make sure the app you're trying to share the screen with supports Wayland and sharing the screen with it.

Notable programs that still don't have full support for this are Discord and Zoom.

It still doesn't work!

Follow the official xdg-desktop-portal-wlr troubleshooting guide.

If it still doesn't work, consider opening an issue in the xdg-desktop-portal-hyprland repo.

References

@mamaraddio
Copy link

My rig:

OS: Arch Linux x86_64
Host: 81LK (IdeaPad L340-15IRH Gaming)
Kernel: 6.1.10-arch1-1
Display: 1920x1080 @ 60Hz
WM: Hyprland (Wayland)
CPU: Intel(R) Core(TM) i7-9750HF (12) @ 4.5 GHz
GPU: NVIDIA GeForce GTX 1650 Mobile / Max-Q

I followed step by step the Hyprlan Wiki, then I noticed that my setup was unable to screenshare and thanks to Hyprland Wiki reference I found this gist. I read and closely followed this guide.

Now I am able to capture the screen on OBS.

I use Brave, therefore a Chromium based browser, I setted the two flags for WebRTC and ozonePlatform and I tried a screenshare on Google Meet.
Despite of what Hyprland Wiki says, I can share single browser tabs and single windows, but I can't share entire monitor.

I installed nvidia-open-dkms drivers, slurp, grim, and done all the NVIDIA tricks referenced betwen Hyprland Wiki, NVIDIA docs, this guide and the Archwiki, including kernel parameters.

Every time i try to share the entire screen I get a black screen sharing.

Below the packages I installed (hope to don't forget nothing usefull)

paru -Qs nvidia
local/egl-wayland 2:1.1.11-3
    EGLStream-based Wayland external platform
local/hyprland-nvidia-git r2433.287f3132-1
    A dynamic tiling Wayland compositor based on wlroots that doesn't sacrifice on its looks. (NVIDIA patch)
local/lib32-nvidia-utils 525.89.02-1
    NVIDIA drivers utilities (32-bit)
local/libvdpau 1.5-1
    Nvidia VDPAU library
local/libxnvctrl 525.85.05-1
    NVIDIA NV-CONTROL X extension
local/nvidia-open-dkms 525.89.02-2
    NVIDIA open kernel modules
local/nvidia-settings 525.85.05-1
    Tool for configuring the NVIDIA graphics driver
local/nvidia-utils 525.89.02-1
    NVIDIA drivers utilities
local/nvidia-vaapi-driver-git 0.0.8.r63.g766d843-1
    A VA-API implemention using NVIDIA's NVDEC

paru -Qs qt.-wayland
local/qt5-wayland 5.15.8+kde+r58-1 (qt qt5)
    Provides APIs for Wayland
local/qt6-wayland 6.4.2-1 (qt6)
    Provides APIs for Wayland

paru -Qs hyprland
local/hyprland-nvidia-git r2433.287f3132-1
    A dynamic tiling Wayland compositor based on wlroots that doesn't sacrifice on its looks. (NVIDIA patch)
local/waybar-hyprland-git 0.9.17.r66.gea38eec2-1
    Highly customizable Wayland bar for Sway and Wlroots based compositors, with workspaces support for Hyprland (git version)
local/xdg-desktop-portal-hyprland-git r258.2fa7e34-1
    xdg-desktop-portal backend for hyprland
    
paru -Qs obs
local/obs-studio 29.0.2-1
    Free, open source software for live streaming and recording
local/wlrobs-hg r63.a48763b63f96-1
    An obs-studio plugin that allows you to screen capture on wlroots based wayland compositors

@DartMitai
Copy link

systemctl --user status pipewire wireplumber

● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
     Active: active (running) since Mon 2023-03-13 22:52:03 +05; 23min ago
TriggeredBy: ● pipewire.socket
   Main PID: 612 (pipewire)
      Tasks: 2 (limit: 14040)
     Memory: 8.0M
        CPU: 316ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─612 /usr/bin/pipewire

мар 13 22:52:03 dart systemd[605]: Started pipewire.service - PipeWire Multimedia Service.
мар 13 22:52:03 dart pipewire[612]: mod.rt: Can't find org.freedesktop.portal.Desktop. Is xdg-desktop-portal running?
мар 13 22:52:03 dart pipewire[612]: mod.rt: found session bus but no portal

● wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: active (running) since Mon 2023-03-13 22:52:03 +05; 23min ago
   Main PID: 613 (wireplumber)
      Tasks: 4 (limit: 14040)
     Memory: 36.3M
        CPU: 387ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
             └─613 /usr/bin/wireplumber

мар 13 22:52:03 dart systemd[605]: Started wireplumber.service - Multimedia Service Session Manager.
мар 13 22:52:03 dart wireplumber[613]: Can't find org.freedesktop.portal.Desktop. Is xdg-desktop-portal running?
мар 13 22:52:03 dart wireplumber[613]: found session bus but no portal
мар 13 22:52:05 dart wireplumber[613]: Failed to set scheduler settings: Операция не позволена
мар 13 22:52:05 dart wireplumber[613]: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed?
мар 13 22:52:05 dart wireplumber[613]: PipeWire's libcamera SPA missing or broken. libcamera not supported.
мар 13 22:52:05 dart wireplumber[613]: SPA handle 'api.bluez5.enum.dbus' could not be loaded; is it installed?
мар 13 22:52:05 dart wireplumber[613]: PipeWire's BlueZ SPA missing or broken. Bluetooth not supported.

systemctl --user status xdg-desktop-portal-hyprland

● xdg-desktop-portal-hyprland.service - Portal service (Hyprland implementation)
     Loaded: loaded (/usr/lib/systemd/user/xdg-desktop-portal-hyprland.service; static)
     Active: active (running) since Mon 2023-03-13 22:52:35 +05; 24min ago
   Main PID: 860 (xdg-desktop-por)
      Tasks: 2 (limit: 14040)
     Memory: 1.6M
        CPU: 19ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/xdg-desktop-portal-hyprland.service
             └─860 /usr/libexec/xdg-desktop-portal-hyprland

мар 13 22:52:35 dart systemd[605]: Starting xdg-desktop-portal-hyprland.service - Portal service (Hyprland implementation)...
мар 13 22:52:35 dart systemd[605]: Started xdg-desktop-portal-hyprland.service - Portal service (Hyprland implementation).

systemctl --user status xdg-desktop-portal

● xdg-desktop-portal.service - Portal service
     Loaded: loaded (/usr/lib/systemd/user/xdg-desktop-portal.service; static)
     Active: active (running) since Mon 2023-03-13 22:52:35 +05; 24min ago
   Main PID: 817 (xdg-desktop-por)
      Tasks: 4 (limit: 14040)
     Memory: 9.4M
        CPU: 55ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/xdg-desktop-portal.service
             └─817 /usr/libexec/xdg-desktop-portal

мар 13 22:52:33 dart systemd[605]: Starting xdg-desktop-portal.service - Portal service...
мар 13 22:52:34 dart xdg-desktop-por[817]: No skeleton to export
мар 13 22:52:35 dart systemd[605]: Started xdg-desktop-portal.service - Portal service.

OBS not work and my browaser on unfolds on a full window crashes, where should I write to get help setting up?))

@PowerBall253
Copy link
Author

@MitaiDart Do you happen to have any other portal implementations installed? Run pacman -Q | grep xdg-desktop-portal- to check.

@DartMitai
Copy link

DartMitai commented Mar 14, 2023

@MitaiDart Do you happen to have any other portal implementations installed? Run pacman -Q | grep xdg-desktop-portal- to check.

sudo apt list --installed | grep xdg-desktop-portal
xdg-desktop-portal-gtk/testing,now 1.14.1-1 amd64 [установлен]
xdg-desktop-portal/testing,now 1.16.0-2 amd64 [установлен]

this question is not entirely clear to me if I delete everything including xdg-desktop-portal-gtk abd xdg-desktop-portal then the status becomes like this

systemctl --user status xdg-desktop-portal-hyprland
○ xdg-desktop-portal-hyprland.service - Portal service (Hyprland implementation)
     Loaded: loaded (/usr/lib/systemd/user/xdg-desktop-portal-hyprland.service; static)
     Active: inactive (dead)

@rileyhawk1417
Copy link

@MitaiDart am also experiencing a similar issue. Pipewire & Wireplumber can find a session but not the bus xdg-desktop-portal not sure why its not detecting xdg-desktop-portal-hyprland. I also followed this message and enabled WebRTC PipeWire support to Enabled & Preferred Ozone platform to wayland.
Can only share single tabs, but not a window or the entire screen. Was testing screen sharing on brave using google meet.

@hyper-dot
Copy link

@MitaiDart am also experiencing a similar issue. Pipewire & Wireplumber can find a session but not the bus xdg-desktop-portal not sure why its not detecting xdg-desktop-portal-hyprland. I also followed this message and enabled WebRTC PipeWire support to Enabled & Preferred Ozone platform to wayland. Can only share single tabs, but not a window or the entire screen. Was testing screen sharing on brave using google meet.

https://gist.github.com/PowerBall253/2dea6ddf6974ba4e5d26c3139ffb7580?permalink_comment_id=4458701#gistcomment-4458701

Check this out!!

@radholm
Copy link

radholm commented May 11, 2023

Im on:
hyprland-nvidia-git r2895.7fde80f3-1
hyprland-scratchpad-git 814e260-1
waybar-hyprland-git 0.9.17.r159.ga9a22234-1
xdg-desktop-portal-hyprland-git 1:r282.2bdadd2-1
vivaldi 6.0.2979.18-1

The screensharing with Vivaldi worked fine until like a week ago, can't tell what happened. I have enabled WebRTC in the browser and tried with x11 and wayland as the Ozone flag.

Logs

This happens when trying to select entire screen (previewer is black).

journalctl --user --user-unit wireplumber.service -f:

<WpPortalPermissionStorePlugin:0x55f5181f02e0> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera

@CRAG666
Copy link

CRAG666 commented Jul 24, 2023

@radholm I have the same error but still can't solve it

@mischw
Copy link

mischw commented Aug 11, 2023

Another reason which might prevent screensharing from working is the monitor using 10 bit depth. As soon as I switched back to 8 bit it worked.
hyprwm/xdg-desktop-portal-hyprland#24

@univeous
Copy link

I'm still getting xdg-desktop-portal-hyprland: unsupported wl_shm format 0x343247 error even with hyprland-nvidia-git.
I followed all the steps in this guide and the hyprland wiki. Does anyone have any clue?

@hammsvietro
Copy link

same issue here

@mmi333
Copy link

mmi333 commented Oct 4, 2023

@radholm @CRAG666

I had the same problem today and for me adding bitdepth,10 to the monitor rule in the hyprland config solved it.

monitor=,preferred,auto,auto,bitdepth,10

Not sure if it would work in your cases too, but thought it might help.

@barbiefan
Copy link

@radholm @CRAG666

I had the same problem today and for me adding bitdepth,10 to the monitor rule in the hyprland config solved it.

monitor=,preferred,auto,auto,bitdepth,10

YEP, same here
config is: hyprland-nvidia, pipewire, wireplumber, xdg-desktop-portal+xdg-desktop-portal-hyprland

Wasn't working in anything (firefox, brave, obs) and after setting bitdepth to 10 it started working in everything.
I've done some config changes that were in this doc and in docs linked at the bottom, but don't remember what steps exactly. But remember that from the start it seemed like everything is set up as it should be according to troubleshooting, but it wasn't working.

@julius-boettger
Copy link

@radholm @CRAG666

I had the same problem today and for me adding bitdepth,10 to the monitor rule in the hyprland config solved it.

monitor=,preferred,auto,auto,bitdepth,10

Not sure if it would work in your cases too, but thought it might help.

This also fixed it for me! Thanks :)

@JcBernack
Copy link

JcBernack commented Nov 12, 2023

@radholm @CRAG666

I had the same problem today and for me adding bitdepth,10 to the monitor rule in the hyprland config solved it.

monitor=,preferred,auto,auto,bitdepth,10

Not sure if it would work in your cases too, but thought it might help.

What the actual.. that's the last thing I would have expected to work. Thanks!

I did not install hyprland-nvidia-git, the only other thing I did was getting the hyprland portal:
xdg-desktop-portal-hyprland-git 1:r326.b2fc111-1

I have only one kind of funny issue remaining:
My left monitor is in portait mode, but the screen share does not reflect that. The content is rotated 90° so everyone needs to tilt their head.

@mamaraddio
Copy link

mamaraddio commented Nov 30, 2023

Do you know of a way to force wrl to be the default for the APIs it implements, and fallback to gtk/gnome for the rest?

You could take a look at man 5 portals.conf to get an example of exactly what you're asking. Set a default portal (gtk) but override specific interfaces with another portal implementation (wlr or even better hyprland)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment