arv7510pw dmesg diff

dmesg_diff.patch

index 505a363..9db563d 100644
--- "working.txt"
+++ "broken.txt"
@@ -1,18 +1,19 @@
-Linux version 3.10.49 (iriz@plutonium) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43737) ) #2 Thu Dec 18 14:24:37 EET 2014
-SoC: Danube rev 1.5
+Linux version 4.1.11 (srcds@debian) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47417) ) #1 Sat Nov 7 22:03:12 UTC 2015
+SoC: Danube rev 1.3
 bootconsole [early0] enabled
-CPU revision is: 00019641 (MIPS 24KEc)
+CPU0 revision is: 00019641 (MIPS 24KEc)
 MIPS: machine is ARV4510PW - Wippies, Elisa
 Determined physical RAM map:
  memory: 02000000 @ 00000000 (usable)
 Initrd not found or empty - disabling initrd
 Zone ranges:
-  Normal   [mem 0x00000000-0x01ffffff]
+  Normal   [mem 0x0000000000000000-0x0000000001ffffff]
 Movable zone start for each node
 Early memory node ranges
-  node   0: [mem 0x00000000-0x01ffffff]
+  node   0: [mem 0x0000000000000000-0x0000000001ffffff]
+Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
 On node 0 totalpages: 8192
-free_area_init_node: node 0, pgdat 803909d0, node_mem_map 81003040
+free_area_init_node: node 0, pgdat 8045fe00, node_mem_map 81006d60
   Normal zone: 64 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 8192 pages, LIFO batch:0
@@ -25,14 +26,18 @@ Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
 PID hash table entries: 128 (order: -3, 512 bytes)
 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Writing ErrCtl register=00000000
-Readback ErrCtl register=00000000
-Memory: 28260k/32768k available (2997k kernel code, 4508k reserved, 757k data, 204k init, 0k highmem)
+Writing ErrCtl register=00048e38
+Readback ErrCtl register=00048e38
+Memory: 27404K/32768K available (3695K kernel code, 152K rwdata, 736K rodata, 196K init, 195K bss, 5364K reserved, 0K cma-reserved)
 NR_IRQS:256
 CPU Clock: 333MHz
+clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
+sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
 Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
 pid_max: default: 32768 minimum: 301
-Mount-cache hash table entries: 512
+Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 pinctrl-xway 1e100b10.pinmux: Init done
@@ -40,49 +45,44 @@ dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
 PCI host bridge /fpi@10000000/pci@E105400 ranges:
  MEM 0x0000000018000000..0x0000000019ffffff
   IO 0x000000001ae00000..0x000000001affffff
-bio: create slab <bio-0> at 0
 gpio-stp-xway 1e100bb0.stp: Init done
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
-pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
+pci_bus 0000:00: root bus resource [io  0xffffffff]
+pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
 pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 pci 0000:00:0c.0: [1814:0601] type 00 class 0x028000
-pci 0000:00:0c.0: reg 10: [mem 0xffff0000-0xffffffff]
+pci 0000:00:0c.0: reg 0x10: [mem 0xffff0000-0xffffffff]
 pci 0000:00:0f.0: [1106:3038] type 00 class 0x0c0300
-pci 0000:00:0f.0: reg 20: [io  0xfce0-0xfcff]
+pci 0000:00:0f.0: reg 0x20: [io  0xfce0-0xfcff]
 pci 0000:00:0f.0: supports D1 D2
 pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot
 pci 0000:00:0f.1: [1106:3038] type 00 class 0x0c0300
-pci 0000:00:0f.1: reg 20: [io  0xfce0-0xfcff]
+pci 0000:00:0f.1: reg 0x20: [io  0xfce0-0xfcff]
 pci 0000:00:0f.1: supports D1 D2
 pci 0000:00:0f.1: PME# supported from D0 D1 D2 D3hot
 pci 0000:00:0f.2: [1106:3104] type 00 class 0x0c0320
-pci 0000:00:0f.2: reg 10: [mem 0x00000000-0x000000ff]
+pci 0000:00:0f.2: reg 0x10: [mem 0x00000000-0x000000ff]
 pci 0000:00:0f.2: supports D1 D2
 pci 0000:00:0f.2: PME# supported from D0 D1 D2 D3hot
 pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
 pci 0000:00:0c.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
 pci 0000:00:0f.2: BAR 0: assigned [mem 0x18010000-0x180100ff]
-pci 0000:00:0f.0: BAR 4: assigned [io  0x1ae00000-0x1ae0001f]
-pci 0000:00:0f.1: BAR 4: assigned [io  0x1ae00020-0x1ae0003f]
-pci 0000:00:0c.0: SLOT:12 PIN:1 IRQ:135
-pci 0000:00:0f.0: SLOT:15 PIN:1 IRQ:66
-pci 0000:00:0f.1: SLOT:15 PIN:2 IRQ:66
-pci 0000:00:0f.2: SLOT:15 PIN:3 IRQ:66
-Switching to clocksource MIPS
+pci 0000:00:0f.0: BAR 4: no space for [io  size 0x0020]
+pci 0000:00:0f.0: BAR 4: failed to assign [io  size 0x0020]
+pci 0000:00:0f.1: BAR 4: no space for [io  size 0x0020]
+pci 0000:00:0f.1: BAR 4: failed to assign [io  size 0x0020]
+Switched to clocksource MIPS
 NET: Registered protocol family 2
-TCP established hash table entries: 512 (order: 0, 4096 bytes)
-TCP bind hash table entries: 512 (order: -1, 2048 bytes)
-TCP: Hash tables configured (established 512 bind 512)
-TCP: reno registered
+TCP established hash table entries: 1024 (order: 0, 4096 bytes)
+TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
+TCP: Hash tables configured (established 1024 bind 1024)
 UDP hash table entries: 256 (order: 0, 4096 bytes)
 UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 NET: Registered protocol family 1
-PCI: Enabling device 0000:00:0f.0 (0000 -> 0001)
-PCI: Enabling device 0000:00:0f.1 (0000 -> 0001)
 PCI: Enabling device 0000:00:0f.2 (0000 -> 0002)
 PCI: CLS 0 bytes, default 32
 gptu: totally 6 16-bit timers/counters
@@ -93,18 +93,18 @@ gptu: succeeded to request irq 128
 gptu: succeeded to request irq 129
 gptu: succeeded to request irq 130
 gptu: succeeded to request irq 131
-lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x01900000
+futex hash table entries: 256 (order: -1, 3072 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
-msgmni has been set to 55
 io scheduler noop registered
 io scheduler deadline registered (default)
-1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lantiq,asc
-console [ttyLTQ0] enabled, bootconsole disabled
+1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
+console [ttyLTQ0] enabled
+bootconsole [early0] disabled
+lantiq nor flash device: 01000000 at 10000000
 ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x000018
 Intel/Sharp Extended Query Table at 0x0031
 Intel/Sharp Extended Query Table at 0x0031
-Using buffer write method
 cfi_cmdset_0001: Erase suspend on write enabled
 erase region 0: offset=0x0,size=0x20000,blocks=128
 3 ofpart partitions found on MTD device ltq_nor
@@ -113,24 +113,26 @@ Creating 3 MTD partitions on "ltq_nor":
 0x000000040000-0x000000060000 : "uboot_env"
 0x000000060000-0x000001000000 : "firmware"
 2 uimage-fw partitions found on MTD device firmware
-0x000000060000-0x0000001ad4fe : "kernel"
-mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
-0x0000001ad4fe-0x000001000000 : "rootfs"
-mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
+0x000000060000-0x0000001e8a55 : "kernel"
+0x0000001e8a55-0x000001000000 : "rootfs"
 mtd: device 4 (rootfs) set to be root filesystem
-mtd: partition "rootfs_data" created automatically, ofs=0x720000, len=0x8e0000
-0x000000720000-0x000001000000 : "rootfs_data"
+1 squashfs-split partitions found on MTD device rootfs
+0x000000a20000-0x000001000000 : "rootfs_data"
+etop: invalid MAC, using random
 libphy: ltq_mii: probed
 adm6996: eth0: ADM6996M model PHY found.
 eth0: attached PHY [Infineon ADM6996] (phy_addr=1e180000.etop-ff:00, irq=-1)
 wdt 1f8803f0.watchdog: Init done
-leds-gpio gpio-leds.5: pins are not configured from the driver
-TCP: cubic registered
+NET: Registered protocol family 10
 NET: Registered protocol family 17
+bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
 8021q: 802.1Q VLAN Support v1.8
-UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
+UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
 VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
-Freeing unused kernel memory: 204K (803ad000 - 803e0000)
+Freeing unused kernel memory: 196K (8047f000 - 804b0000)
+init: Console is alive
+init: - watchdog -
+SCSI subsystem initialized
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-platform: EHCI generic platform driver
 ehci-pci: EHCI PCI platform driver
@@ -141,68 +143,144 @@ ehci-pci 0000:00:0f.2: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 4 ports detected
 uhci_hcd: USB Universal Host Controller Interface driver
-uhci_hcd 0000:00:0f.0: UHCI Host Controller
-uhci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
-uhci_hcd 0000:00:0f.0: irq 66, io base 0x1ae00000
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 2 ports detected
-uhci_hcd 0000:00:0f.1: UHCI Host Controller
-uhci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
-uhci_hcd 0000:00:0f.1: irq 66, io base 0x1ae00020
-hub 3-0:1.0: USB hub found
-hub 3-0:1.0: 2 ports detected
-jffs2: notice: (372) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 303 of xref (0 dead, 18 orphan) found.
-IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
-
-NET: Registered protocol family 10
+uhci_hcd 0000:00:0f.0: init 0000:00:0f.0 fail, -16
+uhci_hcd: probe of 0000:00:0f.0 failed with error -16
+uhci_hcd 0000:00:0f.1: init 0000:00:0f.1 fail, -16
+uhci_hcd: probe of 0000:00:0f.1 failed with error -16
+usbcore: registered new interface driver usb-storage
+init: - preinit -
+random: procd urandom read with 39 bits of entropy available
+mount_root: loading kmods from internal overlay
+jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
+block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
+block: extroot: not configured
+jffs2: notice: (395) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
+mount_root: loading kmods from internal overlay
+random: nonblocking pool is initialized
+block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
+block: extroot: not configured
+mount_root: switching to jffs2 overlay
+procd: - early -
+procd: - watchdog -
+procd: - ubus -
+procd: - init -
+IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
 Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
-nf_conntrack version 0.5.0 (444 buckets, 1776 max)
+NET: Registered protocol family 8
+NET: Registered protocol family 20
+ntfs: driver 2.1.32 [Flags: R/O MODULE].
+tun: Universal TUN/TAP device driver, 1.6
+tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
+PPP generic driver version 2.4.2
 ip6_tables: (C) 2000-2006 Netfilter Core Team
-Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
-Backport generated by backports.git backports-20140320-37-g5c33da0
+IFX MEI Version 5.00.00
+Infineon CPE API Driver version: DSL CPE API V3.24.4.4
+Linux video capture interface: v2.00
+hidraw: raw HID events driver (C) Jiri Kosina
+u32 classifier
+    input device check on
+    Actions configured
+Mirror/redirect action on
+nf_conntrack version 0.5.0 (431 buckets, 1724 max)
+Bluetooth: Core ver 2.20
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP filters: protocol multicast
+Bluetooth: BNEP socket layer initialized
+usbcore: registered new interface driver btusb
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+Loading modules backported from Linux version master-2015-10-26-0-g28c26cb
+Backport generated by backports.git backports-20150903-4-g12cf266
 Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
 request_timer(3, 0x000001AE, 1)...successful!
 Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
+gspca_main: v2.14.0 registered
+usbcore: registered new interface driver mars
+usbcore: registered new interface driver mr97310a
+usbcore: registered new interface driver ov519
+usbcore: registered new interface driver ov534
+usbcore: registered new interface driver ov534_9
+usbcore: registered new interface driver pac207
+usbcore: registered new interface driver pac7311
+usbcore: registered new interface driver se401
+usbcore: registered new interface driver gspca_sn9c20x
+usbcore: registered new interface driver sonixb
+usbcore: registered new interface driver sonixj
+usbcore: registered new interface driver spca500
+usbcore: registered new interface driver spca501
+usbcore: registered new interface driver spca505
+usbcore: registered new interface driver spca506
+usbcore: registered new interface driver spca508
+usbcore: registered new interface driver spca561
+usbcore: registered new interface driver sq905
+usbcore: registered new interface driver sq905c
+usbcore: registered new interface driver stk014
+usbcore: registered new interface driver STV06xx
+usbcore: registered new interface driver sunplus
+usbcore: registered new interface driver t613
+usbcore: registered new interface driver tv8532
+usbcore: registered new interface driver vc032x
+usbcore: registered new interface driver gspca_zc3xx
+Bluetooth: HCI UART driver ver 2.3
+Bluetooth: HCI UART protocol H4 registered
+Bluetooth: HCI UART protocol BCSP registered
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
 ip_tables: (C) 2000-2006 Netfilter Core Team
+ATM1.0.26    ATM (A1) firmware version 0.17
+ifxmips_atm: ATM init succeed
+NET: Registered protocol family 24
+usbcore: registered new interface driver Philips webcam
+Bluetooth: RFCOMM TTY layer initialized
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+usbcore: registered new interface driver usblp
+usbcore: registered new interface driver usbserial
+usbcore: registered new interface driver usbserial_generic
+usbserial: USB Serial support registered for generic
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
 xt_time: kernel timezone is -0000
-cfg80211: Calling CRDA to update world regulatory domain
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver cdc_ncm
 cfg80211: World regulatory domain updated:
 cfg80211:  DFS Master region: unset
 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
 cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
-cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
-cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
+cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
+cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
 cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
+usbcore: registered new interface driver cp210x
+usbserial: USB Serial support registered for cp210x
+usbcore: registered new interface driver ftdi_sio
+usbserial: USB Serial support registered for FTDI USB Serial Device
+usbcore: registered new interface driver conex
+usbcore: registered new interface driver etoms
+usbcore: registered new interface driver finepix
+usbcore: registered new interface driver gspca_gl860
+usbcore: registered new interface driver jeilinj
+usbcore: registered new interface driver konica
+usbcore: registered new interface driver ALi m5602
+usbcore: registered new interface driver qmi_wwan
+usbcore: registered new interface driver rndis_host
+usbcore: registered new interface driver cdc_mbim
+usbcore: registered new interface driver option
+usbserial: USB Serial support registered for GSM modem (1-port)
 PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
-rt2800pci 0000:00:0c.0: setting latency timer to 64
 ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
 ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
-device eth0.1 entered promiscuous mode
 device eth0 entered promiscuous mode
-br-lan: port 1(eth0.1) entered forwarding state
-br-lan: port 1(eth0.1) entered forwarding state
-
-WARNING: FW version 12.1.0 too old.  Minimum required FW version is 12.4.0
-cfg80211: Calling CRDA for country: FI
-cfg80211: Regulatory domain changed to country: FI
-cfg80211:  DFS Master region: ETSI
-cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
-cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
-cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
-cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
-cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
-cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
-br-lan: port 1(eth0.1) entered forwarding state
-ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
-ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
-IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
-device wlan0 entered promiscuous mode
-br-lan: port 2(wlan0) entered forwarding state
-br-lan: port 2(wlan0) entered forwarding state
-IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
-br-lan: port 2(wlan0) entered forwarding state
+br-lan: port 1(eth0) entered forwarding state
+br-lan: port 1(eth0) entered forwarding state
+br-lan: port 1(eth0) entered forwarding state
\ No newline at end of file