RobolinkAkademi

#include <dmoto.h>

dmoto cizgi;

void setup() {
  Serial.begin(9600);
  cizgi.pinSet();
}

void loop() {

RobolinkAkademi

#include <dmoto.h>
dmoto obstacle;

void setup() 
{
  Serial.begin(9600);

  obstacle.pinSet();
  obstacle.Stop();
}

RobolinkAkademi

#include <dmoto.h>
dmoto Light;
float ldrRemove =0;
void setup() {
  Serial.begin(9600);
  Light.pinSet();
  Light.Stop();
}

void loop() {

RobolinkAkademi

#include <SPI.h>
#include <nRF24L01.h>
#include <RF24.h>
#include "U8glib.h"
#include <Wire.h> //I2C Arduino Library
#include "I2Cdev.h"
#include "MPU6050.h"
#define Joy1X A0
#define Joy1Y A1
#define Joy2X A2

RobolinkAkademi

#include <SPI.h> 
#include <MFRC522.h>
const byte YESIL_LED = 4;
const byte KIRMIZI_LED = 2;
MFRC522 rfid(10, 9);//RFID Chip Select ve Reset pinlerinin ayarlarını yapıyoruz. 
byte Kart[4] = {53, 122, 201, 226}; // {53, 122, 201, 226} buraya kendi okuttuğunuz kartın ID numarasını yazmalısınız. 
boolean Yetki; 
void setup() 
{ 
  Serial.begin(9600); 

RobolinkAkademi

#include <HRFMessage.h> 
HRFMessage server(&Serial1);
#define buton 4
void setup() 
{
pinMode(buton, INPUT); 
Serial.begin(9600); 
Serial1.begin(9600);
} 
void loop() 

RobolinkAkademi

#include <HRFMessage.h>
#define led 4 
HRFMessage client(&Serial1); 
long lastSendTime = 0;
void setup()
{
pinMode(led, OUTPUT); 
Serial.begin(9600);
Serial1.begin(9600);
} 

RobolinkAkademi

#include <HRFMessage.h> 
HRFMessage server(&Serial1); 
#define buton 2
void setup() 
{ 
pinMode(buton, INPUT);
Serial.begin(9600);
Serial1.begin(9600);
}
void loop()

RobolinkAkademi

#include <HRFMessage.h> 
#define led 2 
HRFMessage client(&Serial1); 
long lastSendTime = 0;
void setup()
{
pinMode(led, OUTPUT); 
Serial.begin(9600);
Serial1.begin(9600);
} 

RobolinkAkademi

#include <mcp_can.h> 
#include <SPI.h> 
#define buton 8 
#define SPI_CS_PIN 9 
const int ledHIGH = 1;
const int ledLOW = 0;
unsigned char Led_Yak[8] = {ledHIGH, 1, 2, 3,4,5,6,7}; 
unsigned char Led_Sondur[8] = {ledLOW, 1, 2, 3,4,5,6,7};
MCP_CAN CAN(SPI_CS_PIN);
void setup()