-
-
Save SheepReaper/e7d446524314a388f3ca78b16670bf73 to your computer and use it in GitHub Desktop.
potato reboot fail
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.01.26 20:33:19 =~=~=~=~=~=~=~=~=~=~=~= | |
GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:0;READ:0;0.0;CHK:0; | |
no sdio debug board detected | |
TE: 1887743 | |
BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz | |
set vcck to 1120 mv | |
set vddee to 1000 mv | |
Board ID = 3 | |
CPU clk: 1200MHz | |
DQS-corr enabled | |
DDR scramble enabled | |
DDR3 chl: Rank0+1 @ 912MHz | |
bist_test rank: 0 1a 03 32 29 14 3e 17 00 2e 2f 19 45 18 00 30 2a 12 42 17 00 2f 2b 14 43 702 rank: 1 1a 05 2f 29 13 3f 16 00 2d 2e 16 46 17 02 2d 29 13 3f 17 03 2c 2c 15 43 702 - PASS | |
Rank0: 1024MB(auto)-2T-13 | |
Rank1: 1024MB(auto)-2T-13 | |
AddrBus test pass! | |
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0 | |
New fip structure! | |
Load bl30 from SD, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0 | |
Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0 | |
Load bl33 from SD, src: 0x0004c200, des: 0x01000000, size: 0x00096a00, part: 0 | |
NOTICE: BL3-1: v1.0(release):53f813e | |
NOTICE: BL3-1: Built : 15:51:23, May 22 2019 | |
[BL31]: GXL CPU setup! | |
NOTICE: BL3-1: GXL normal boot! | |
NOTICE: BL3-1: BL33 decompress pass | |
mpu_config_enable:system pre init ok | |
dmc sec lock | |
[Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz] | |
OPS=0x85 | |
21 0e 85 00 59 17 cd 20 a3 4a 4a 10 e0 0f 05 28 | |
[2.498875 Inits done] | |
secure task start! | |
high task start! | |
low task start! | |
ERROR: Error initializing runtime service opteed_fast | |
<debug_uart> | |
U-Boot 2022.07+ (Nov 20 2022 - 18:31:28 -0500) Libre Computer Board AML-S905X-CC | |
Model: Libre Computer AML-S905X-CC | |
SoC: Amlogic Meson GXL (S905X) Revision 21:e (85:2) | |
DRAM: 2 GiB | |
Core: 177 devices, 29 uclasses, devicetree: separate | |
WDT: Not starting watchdog@98d0 | |
MMC: mmc@72000: 1, mmc@74000: 0 | |
Loading Environment from FAT... ** Bad device specification mmc 0 ** | |
** Bad device specification mmc 0 ** | |
Couldn't find partition mmc 0:1 | |
Error: could not access storage. | |
In: serial | |
Out: serial | |
Err: serial | |
[BL31]: tee size: 0 | |
Net: Fast Ethernet | |
[BL31]: tee size: 0 | |
Net: No ethernet found. | |
starting USB... | |
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2 | |
Register 2000140 NbrPorts 2 | |
Starting the controller | |
USB XHCI 1.00 | |
scanning bus usb@c9000000 for devices... 2 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Hit any key to stop autoboot: 1 0 | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
** Unable to read file ubootefi.var ** | |
Failed to load EFI variables | |
BootOrder not defined | |
EFI boot manager: Cannot load any image | |
Found EFI removable media binary efi/boot/bootaa64.efi | |
1890184 bytes read in 90 ms (20 MiB/s) | |
Booting /efi\boot\bootaa64.efi | |
EFI stub: Booting Linux Kernel... | |
EFI stub: Using DTB from configuration table | |
EFI stub: Exiting boot services... | |
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
[ 0.000000] Linux version 6.0.12-00858-gb98721ea4575 (autobuild@deb.libre.computer) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Thu Dec 8 19:08:19 UTC 2022 | |
[ 0.000000] Machine model: Libre Computer AML-S905X-CC | |
[ 0.000000] efi: EFI v2.90 by Das U-Boot | |
[ 0.000000] efi: ESRT=0x7ae51040 RTPROP=0x7ae53040 SMBIOS=0x7ae55000 RNG=0x57f8c040 MEMRESERVE=0x57f8b040 | |
[ 0.000000] efi: seeding entropy pool | |
[ 0.000000] random: crng init done | |
[ 0.000000] esrt: Reserving ESRT space from 0x000000007ae51040 to 0x000000007ae51078. | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] DMA32 empty | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] | |
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] | |
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] | |
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] | |
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007ae52fff] | |
[ 0.000000] node 0: [mem 0x000000007ae53000-0x000000007ae53fff] | |
[ 0.000000] node 0: [mem 0x000000007ae54000-0x000000007ae54fff] | |
[ 0.000000] node 0: [mem 0x000000007ae55000-0x000000007ae57fff] | |
[ 0.000000] node 0: [mem 0x000000007ae58000-0x000000007ae58fff] | |
[ 0.000000] node 0: [mem 0x000000007ae59000-0x000000007ae5cfff] | |
[ 0.000000] node 0: [mem 0x000000007ae5d000-0x000000007de7ffff] | |
[ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff] | |
[ 0.000000] node 0: [mem 0x000000007de90000-0x000000007fe5afff] | |
[ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv0.2 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: Trusted OS migration not required | |
[ 0.000000] percpu: Embedded 20 pages/cpu s43176 r8192 d30552 u81920 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
[ 0.000000] CPU features: detected: ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575 root=UUID=672a0911-0909-4a3e-bb4a-772b26b8b543 ro noquiet splash vt.handoff=7 | |
[ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 1684108K/2097152K available (14784K kernel code, 1952K rwdata, 6028K rodata, 3712K init, 505K bss, 150900K reserved, 262144K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] Dynamic Preempt: full | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU event tracing is enabled. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
[ 0.000000] Trampoline variant of Tasks RCU enabled. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.000638] Console: colour dummy device 80x25 | |
[ 0.001158] printk: console [tty0] enabled | |
[ 0.001198] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
[ 0.001223] pid_max: default: 32768 minimum: 301 | |
[ 0.001287] LSM: Security Framework initializing | |
[ 0.001312] Yama: becoming mindful. | |
[ 0.001428] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.001456] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.002756] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.002799] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.002871] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.003006] rcu: Hierarchical SRCU implementation. | |
[ 0.003021] rcu: Max phase no-delay instances is 1000. | |
[ 0.004241] Remapping and enabling EFI services. | |
[ 0.004603] smp: Bringing up secondary CPUs ... | |
[ 0.005119] Detected VIPT I-cache on CPU1 | |
[ 0.005250] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
[ 0.005846] Detected VIPT I-cache on CPU2 | |
[ 0.005964] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
[ 0.006533] Detected VIPT I-cache on CPU3 | |
[ 0.006651] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
[ 0.006738] smp: Brought up 1 node, 4 CPUs | |
[ 0.006809] SMP: Total of 4 processors activated. | |
[ 0.006821] CPU features: detected: 32-bit EL0 Support | |
[ 0.006832] CPU features: detected: 32-bit EL1 Support | |
[ 0.006846] CPU features: detected: CRC32 instructions | |
[ 0.007318] CPU: All CPU(s) started at EL2 | |
[ 0.007354] alternatives: patching kernel code | |
[ 0.008710] devtmpfs: initialized | |
[ 0.014195] Registered cp15_barrier emulation handler | |
[ 0.014236] Registered setend emulation handler | |
[ 0.014415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.014448] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.020577] pinctrl core: initialized pinctrl subsystem | |
[ 0.021126] SMBIOS 3.0 present. | |
[ 0.021157] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022 | |
[ 0.021598] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.022680] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.022980] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
[ 0.023145] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.023236] audit: initializing netlink subsys (disabled) | |
[ 0.023440] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
[ 0.024692] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.024708] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.024729] thermal_sys: Registered thermal governor 'power_allocator' | |
[ 0.024983] cpuidle: using governor menu | |
[ 0.025171] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.025287] ASID allocator initialised with 32768 entries | |
[ 0.037783] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039089] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039520] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx | |
[ 0.041637] KASLR enabled | |
[ 0.048451] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
[ 0.048518] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page | |
[ 0.048533] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
[ 0.048546] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page | |
[ 0.048560] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
[ 0.048573] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page | |
[ 0.048587] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
[ 0.048600] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
[ 0.116583] raid6: neonx8 gen() 2139 MB/s | |
[ 0.184648] raid6: neonx4 gen() 2192 MB/s | |
[ 0.252727] raid6: neonx2 gen() 2086 MB/s | |
[ 0.320797] raid6: neonx1 gen() 1816 MB/s | |
[ 0.388873] raid6: int64x8 gen() 1491 MB/s | |
[ 0.456936] raid6: int64x4 gen() 1663 MB/s | |
[ 0.525024] raid6: int64x2 gen() 1419 MB/s | |
[ 0.593096] raid6: int64x1 gen() 1052 MB/s | |
[ 0.593108] raid6: using algorithm neonx4 gen() 2192 MB/s | |
[ 0.661152] raid6: .... xor() 1579 MB/s, rmw enabled | |
[ 0.661164] raid6: using neon recovery algorithm | |
[ 0.661364] fbcon: Taking over console | |
[ 0.662746] iommu: Default domain type: Passthrough | |
[ 0.663096] SCSI subsystem initialized | |
[ 0.663484] usbcore: registered new interface driver usbfs | |
[ 0.663532] usbcore: registered new interface driver hub | |
[ 0.663572] usbcore: registered new device driver usb | |
[ 0.663847] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.663861] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.663886] PTP clock support registered | |
[ 0.664017] EDAC MC: Ver: 3.0.0 | |
[ 0.664547] Registered efivars operations | |
[ 0.664904] FPGA manager framework | |
[ 0.665020] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.665630] NetLabel: Initializing | |
[ 0.665646] NetLabel: domain hash size = 128 | |
[ 0.665657] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ 0.665717] NetLabel: unlabeled traffic allowed by default | |
[ 0.666154] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.666386] VFS: Disk quotas dquot_6.6.0 | |
[ 0.666438] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 0.671802] NET: Registered PF_INET protocol family | |
[ 0.671985] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.673638] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
[ 0.673735] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.673763] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
[ 0.673889] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
[ 0.674098] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 0.674357] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) | |
[ 0.674451] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.674504] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.674668] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.675104] RPC: Registered named UNIX socket transport module. | |
[ 0.675136] RPC: Registered udp transport module. | |
[ 0.675147] RPC: Registered tcp transport module. | |
[ 0.675157] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.675175] NET: Registered PF_XDP protocol family | |
[ 0.675197] PCI: CLS 0 bytes, default 64 | |
[ 0.675397] Trying to unpack rootfs image as initramfs... | |
[ 0.686935] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
[ 0.687499] kvm [1]: IPA Size Limit: 40 bits | |
[ 0.688759] kvm [1]: vgic interrupt IRQ9 | |
[ 0.688894] kvm [1]: Hyp mode initialized successfully | |
[ 0.690435] Initialise system trusted keyrings | |
[ 0.690697] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
[ 0.696496] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.697154] NFS: Registering the id_resolver key type | |
[ 0.697213] Key type id_resolver registered | |
[ 0.697227] Key type id_legacy registered | |
[ 0.697318] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.697337] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 0.697523] SGI XFS with ACLs, security attributes, no debug enabled | |
[ 0.698920] 9p: Installing v9fs 9p2000 file system support | |
[ 0.737096] xor: measuring software checksum speed | |
[ 0.741194] 8regs : 2442 MB/sec | |
[ 0.745159] 32regs : 2522 MB/sec | |
[ 0.749327] arm64_neon : 2405 MB/sec | |
[ 0.749367] xor: using function: 32regs (2522 MB/sec) | |
[ 0.749390] Key type asymmetric registered | |
[ 0.749402] Asymmetric key parser 'x509' registered | |
[ 0.946836] Freeing initrd memory: 27116K | |
[ 0.960456] alg: self-tests for CTR-KDF (hmac(sha256)) passed | |
[ 0.960567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
[ 0.960682] io scheduler mq-deadline registered | |
[ 0.960699] io scheduler kyber registered | |
[ 0.960750] io scheduler bfq registered | |
[ 0.961508] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized | |
[ 0.977345] soc soc0: Amlogic Meson GXL (S905X) Revision 21:e (85:2) Detected | |
[ 0.981496] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.989460] loop: module loaded | |
[ 0.993755] tun: Universal TUN/TAP device driver, 1.6 | |
[ 0.994852] VFIO - User Level meta-driver version: 0.3 | |
[ 0.995998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 0.996031] ehci-pci: EHCI PCI platform driver | |
[ 0.996081] ehci-platform: EHCI generic platform driver | |
[ 0.996204] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 0.996242] ohci-pci: OHCI PCI platform driver | |
[ 0.996282] ohci-platform: OHCI generic platform driver | |
[ 0.996657] usbcore: registered new interface driver usb-storage | |
[ 0.997358] i2c_dev: i2c /dev entries driver | |
[ 1.001171] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.001205] sdhci: Copyright(c) Pierre Ossman | |
[ 1.001598] Synopsys Designware Multimedia Card Interface Driver | |
[ 1.002125] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.003167] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 1.004157] meson-sm: secure-monitor enabled | |
[ 1.004739] hid: raw HID events driver (C) Jiri Kosina | |
[ 1.004875] usbcore: registered new interface driver usbhid | |
[ 1.004891] usbhid: USB HID core driver | |
[ 1.005247] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered | |
[ 1.008842] NET: Registered PF_PACKET protocol family | |
[ 1.009183] 9pnet: Installing 9P2000 support | |
[ 1.009271] Key type dns_resolver registered | |
[ 1.009685] registered taskstats version 1 | |
[ 1.009716] Loading compiled-in X.509 certificates | |
[ 1.011992] zswap: loaded using pool zstd/z3fold | |
[ 1.013162] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no | |
[ 1.032856] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart | |
[ 2.351187] printk: console [ttyAML0] enabled | |
[ 2.360766] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq | |
[ 2.361594] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware | |
domain-0 init dvfs: 4 | |
[ 2.384326] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 | |
[ 2.384365] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 | |
[ 2.400215] meson-gx-mmc d0074000.mmc: no support for card's volts | |
[ 2.400767] mmc0: error -22 whilst initialising SDIO card | |
[ 2.913248] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator | |
[ 2.914928] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator | |
[ 2.923249] dwc2 c9100000.usb: Controller does not support host mode. | |
[ 2.928240] dwc2: probe of c9100000.usb failed with error -22 | |
[ 2.937538] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 2.939389] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
[ 2.947130] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports | |
[ 2.952886] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 | |
[ 2.962230] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000 | |
[ 2.968331] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 | |
[ 2.976257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.983423] usb usb1: Product: xHCI Host Controller | |
[ 2.988235] usb usb1: Manufacturer: Linux 6.0.12-00858-gb98721ea4575 xhci-hcd | |
[ 2.995301] usb usb1: SerialNumber: xhci-hcd.0.auto | |
[ 3.000595] hub 1-0:1.0: USB hub found | |
[ 3.003886] hub 1-0:1.0: 2 ports detected | |
[ 3.010494] meson-gx-mmc d0072000.mmc: Got CD GPIO | |
[ 3.011019] of_cfs_init | |
[ 3.015056] of_cfs_init: OK | |
[ 3.017956] ALSA device list: | |
[ 3.020789] No soundcards found. | |
[ 3.042996] Freeing unused kernel memory: 3712K | |
[ 3.043145] Run /init as init process | |
Loading, please wait... | |
Starting version 251.4-1ubuntu7 | |
[ 3.157945] mmc1: new ultra high speed SDR50 SDXC card at address aaaa | |
[ 3.159667] mmcblk1: mmc1:aaaa SN64G 59.5 GiB | |
[ 3.165592] mmcblk1: p1 p2 | |
[ 3.262236] usb 1-1: new high-speed USB device number 2 using xhci-hcd | |
[ 3.321766] BTRFS: device label writable devid 1 transid 430 /dev/mmcblk1p2 scanned by systemd-udevd (166) | |
[ 3.411763] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 | |
[ 3.414403] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 3.422075] usb 1-1: Product: USB2.0 Hub | |
[ 3.481413] hub 1-1:1.0: USB hub found | |
[ 3.481794] hub 1-1:1.0: 4 ports detected | |
[ 3.503590] [drm] Initialized simpledrm 1.0.0 20200625 for 7fe5b000.framebuffer on minor 0 | |
[ 3.517304] Console: switching to colour frame buffer device 90x36 | |
[ 3.532885] simple-framebuffer 7fe5b000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device | |
[ 3.538684] mmc0: Card stuck being busy! __mmc_poll_for_busy | |
[ 3.570847] simple-framebuffer simple-framebuffer.0: [drm] *ERROR* could not acquire memory range [mem 0x7fe5b000-0x7ffeffff flags 0x200]: error -16 | |
[ 3.595107] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16 | |
[ 3.671613] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found | |
[ 3.672987] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found | |
[ 3.676930] meson-drm d0100000.vpu: Queued 2 outputs on vpu | |
[ 3.679146] meson8b-dwmac c9410000.ethernet: PTP uses main clock | |
[ 3.691906] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 | |
[ 3.701726] meson8b-dwmac c9410000.ethernet: DWMAC1000 | |
[ 3.706501] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported | |
[ 3.713017] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported | |
[ 3.721793] meson8b-dwmac c9410000.ethernet: COE Type 2 | |
[ 3.725217] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported | |
[ 3.732502] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported | |
[ 3.741622] meson8b-dwmac c9410000.ethernet: Normal descriptors | |
[ 3.745206] meson8b-dwmac c9410000.ethernet: Ring mode enabled | |
[ 3.751126] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
[ 3.758973] Console: switching to colour dummy device 80x25 | |
[ 3.780010] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 | |
[ 3.788707] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 | |
[ 3.793251] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 | |
[ 3.797390] Trying to free nonexistent resource <000000007fe5b000-000000007ffeffff> | |
[ 3.800476] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 | |
[ 3.809831] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.817980] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.833135] lima d00c0000.gpu: bus rate = 166666667 | |
[ 3.833834] lima d00c0000.gpu: mod rate = 24000000 | |
[ 3.838531] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found | |
[ 3.846299] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) | |
[ 3.851814] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 2 | |
[ 3.863233] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver | |
[ 3.870652] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) | |
[ 3.879700] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1 | |
[ 3.900863] Console: switching to colour frame buffer device 90x36 | |
[ 3.924813] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device | |
Begin: Loading essential drivers ... [ 5.296329] async_tx: api initialized (async) | |
done. | |
Begin: Running /scripts/init-premount ... done. | |
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems | |
done. | |
Begin: Will now check root file system ... fsck from util-linux 2.38 | |
[/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 | |
done. | |
[ 5.634624] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm | |
[ 5.637480] BTRFS info (device mmcblk1p2): disk space caching is enabled | |
[ 5.656770] BTRFS info (device mmcblk1p2): enabling ssd optimizations | |
done. | |
Begin: Running /scripts/local-bottom ... done. | |
Begin: Running /scripts/init-bottom ... done. | |
[ 6.285479] systemd[1]: System time before build time, advancing clock. | |
[ 6.363394] NET: Registered PF_INET6 protocol family | |
[ 6.386560] Segment Routing with IPv6 | |
[ 6.386654] RPL Segment Routing with IPv6 | |
[ 6.388662] In-situ OAM (IOAM) with IPv6 | |
[ 6.457732] systemd[1]: systemd 251.4-1ubuntu7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
[ 6.485295] systemd[1]: Detected architecture arm64. | |
Welcome to Ubuntu 22.10! | |
[ 6.493796] systemd[1]: Hostname set to <ubuntu>. | |
[ 6.499060] systemd[1]: Initializing machine ID from D-Bus machine ID. | |
[ 6.504231] systemd[1]: Installed transient /etc/machine-id file. | |
-.mount | |
etc-machine\x2did.mount | |
[ 7.310129] systemd[1]: Queued start job for default target Graphical Interface. | |
[ 7.336765] systemd[1]: Created slice Slice /system/modprobe. | |
[ 7.339335] systemd[1]: Created slice Slice /system/serial-getty. | |
2m OK ] Created slice[ 7.347837] systemd[1]: Created slice Slice /system/systemd-fsck. | |
Slice /syste[ 7.354931] systemd[1]: Created slice User and Session Slice. | |
m/modprobe. | |
[ OK systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[0m] Created slice Slic[ 7.373663] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
e /system/serial-getty. | |
[ OK ] Created slice Sli[ 7.386061] systemd[1]: Reached target Local Integrity Protected Volumes. | |
ce /system/systemd-fsck. | |
[[ 7.398345] systemd[1]: Reached target Slice Units. | |
OK ] Created [ 7.405204] systemd[1]: Reached target Swaps. | |
slice User and Sess[ 7.411886] systemd[1]: Reached target Local Verity Protected Volumes. | |
ion Slice. | |
[ 7.420766] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
m OK ] Started 7.430649] systemd[1]: Listening on LVM2 poll daemon socket. | |
0;1;39mForward Password[ 7.438014] systemd[1]: Listening on multipathd control socket. | |
Ruests to Wall Dire[ 7.446049] systemd[1]: Listening on Syslog Socket. | |
ctory Watch. | |
[ 7.451741] systemd[1]: Listening on fsck to fsckd communication Socket. | |
;32m OK ] Set up a[ 7.460229] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
utomount Arbitr[ 7.469386] systemd[1]: Listening on Journal Audit Socket. | |
arys File System Auto[ 7.476498] systemd[1]: Listening on Journal Socket (/dev/log). | |
mount Point. | |
[ 7.484589] systemd[1]: Listening on Journal Socket. | |
2m OK ] Reached tar[ 7.491826] systemd[1]: Listening on Network Service Netlink Socket. | |
get Local Integr[ 7.501338] systemd[1]: Listening on udev Control Socket. | |
ity Protected Volumes[ 7.507464] systemd[1]: Listening on udev Kernel Socket. | |
. | |
[ OK ] Reached target Slice Units. | |
[ OK ] Reached target Swaps. | |
[ OK ] Reached target Local Verity Protected Volumes. | |
[ OK ] Listening on Device-mapper event daemon FIFOs. | |
[ OK ] Listening on LVM2 poll daemon socket. | |
[ OK ] Listening on multipathd control socket. | |
[ 7.550518] systemd[1]: Mounting Huge Pages File System... | |
;32m OK ] Listening on Syslog Socket. | |
[ 7.562235] systemd[1]: Mounting POSIX Message Queue File System... | |
;32m OK ] Listening on fsck to fsckd communicat[ 7.573789] systemd[1]: Mounting Kernel Debug File System... | |
ion Socket. | |
[ OK[ 7.581155] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
] Listening on initctl Compatibility Named Pipe 7.599814] systemd[1]: Starting Journal Service... | |
0m. | |
[ OK ] Listening on Journal Audit Socket. | |
[ OK ] Listen[ 7.613659] systemd[1]: Starting Set the console keyboard layout... | |
ing on Journal Socket (/dev/log). | |
[ OK ] Listening on J[ 7.626562] systemd[1]: Starting Create List of Static Device Nodes... | |
ournal Socket. | |
[ OK ] Listening on 7.640283] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
9mNetwork Service Netlink Socket. | |
[ O[ 7.652929] systemd[1]: LXD - agent was skipped because of a failed condition check (ConditionPathExists=/dev/virtio-ports/org.linuxcontainers.lxd). | |
[ 7.660086] systemd[1]: Starting Load Kernel Module chromeos_pstore... | |
K ] Listening on udev Control Socket. | |
[ OK ] Listening on udev K[ 7.683348] systemd[1]: Starting Load Kernel Module configfs... | |
ernel Socket. | |
Mounting Huge Pages File S[ 7.695120] systemd[1]: Starting Load Kernel Module drm... | |
ystem... | |
Mounting POSIX Message Queue File System... | |
Mounting Kernel De[ 7.705985] systemd[1]: Starting Load Kernel Module efi_pstore... | |
bug File System... | |
Starting Journal Serv[ 7.721591] systemd[1]: Starting Load Kernel Module fuse... | |
ice... | |
Starting Set the console keyboard layout... | |
Starting Create List of Stat[ 7.738079] systemd[1]: Starting Load Kernel Module pstore_blk... | |
ic Device Nodes... | |
Starting Monitoring of LVMmeventd or progress polling... | |
[ 7.753755] fuse: init (API version 7.36) | |
Starting Load Kernel[ 7.759369] systemd[1]: Starting Load Kernel Module pstore_zone... | |
Module chromeos_pstore... | |
Starting Load Kernel Mo[ 7.773526] systemd[1]: Starting Load Kernel Module ramoops... | |
dule configfs... | |
[ 7.781905] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of a failed condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). | |
Starting Load Kernel Mod[ 7.799001] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
[ 7.809037] systemd[1]: Starting Load Kernel Modules... | |
ule drm... | |
Starting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module fuse... | |
Starting Load Kernel Module pstore_blk... | |
Starting Load Kernel Module pstore_zone... | |
Starting Load Kernel Module ramoops... | |
Starting Loa[ 7.849822] systemd[1]: Starting Remount Root and Kernel File Systems... | |
[ 7.850030] Asymmetric key parser 'pkcs8' registered | |
d Kernel Modules... | |
[ 7.863990] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. | |
Starting Remount Root and Kernel File Systems... | |
[ 7.879674] systemd[1]: Starting Coldplug All udev Devices... | |
Starting Co[ 7.886706] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3 | |
ldplug All udev Devices... | |
[ 7.897544] systemd[1]: Started Journal Service. | |
[ OK ] Started Journal Service. | |
systemd-journald.service | |
[ OK ] Mounted Huge Pages File System. | |
dev-hugepages.mount | |
[ OK ] Mounted POSIX Message Queue File System. | |
[ OK ] Mounted Kernel Debug File System. | |
[ OK ] Finished Create List of Static Device Nodes. | |
dev-mqueue.mount | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
sys-kernel-debug.mount | |
[ OK ] Finished Load Kernel Module configfs. | |
[ OK ] Finished Load Kernel Module drm. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
kmod-static-nodes.service | |
[ OK ] Finished Load Kernel Module fuse. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Set the console keyboard layout. | |
[ OK ] Finished Load Kernel Module ramoops. | |
keyboard-setup.service | |
[ OK ] Finished Load Kernel Modules. | |
[ OK ] Finished Monitoring of LVM dmeventd or progress polling. | |
systemd-modules-load.service | |
[ OK ] Finished Remount Root and Kernel File Systems. | |
lvm2-monitor.service | |
systemd-re[ 8.028123] alua: device handler registered | |
mount-fs.service | |
Mount[ 8.034797] systemd-journald[392]: Received client request to flush runtime journal. | |
ing FUSE Control File System... | |
Mounting Kernel Configuration File System... | |
Starting Device-Mapper Multipath Device Controller... | |
Starting Flush Journal to Persistent Storage... | |
Starting Load/Save Random Seed... | |
Starting Apply Kernel Variables... | |
Starting Create System Users... | |
run-credentials-systemd\x2dsysusers.service.mount | |
[ 8.103021] emc: device handler registered | |
[ OK ] Mounted FUSE Control File System. | |
sys-fs-fuse-connections.mount | |
sys-kernel-config.mount | |
[ OK ] Mounted Kernel Configuration File System. | |
[ OK ] Finished Apply Kernel Variables. | |
systemd-sysctl.service | |
[ OK ] Finished Load/Save Random Seed. | |
systemd-random-seed.service | |
[ OK ] Finished Create System Users. | |
systemd-sysusers.service | |
Starting Create Static Device Nodes in /dev... | |
[ OK ] Finished Flush Journal to Persistent Storage. | |
systemd-journal-flush.service | |
[ OK ] Finished Create Static Device Nodes in /dev. | |
systemd-tmpfiles-setup-dev.service | |
Starting Rule-based Managefor Device Events and Files... | |
[ OK ] Started Device-Mapper Multipath Device Controller. | |
multipathd.service | |
[ OK ] Reached target Preparation for Local File Systems. | |
Mounting Mount unit for core20, revision 1627... | |
Mounting Mount unit for lxd, revision 23687... | |
Mounting Mount unit for snapd, revision 17339... | |
[ OK ] Finished Coldplug All udev Devices. | |
systemd-udev-trigger.service | |
[ OK ] Mounted Mount unit for core20, revision 1627. | |
[ OK ] Mounted Mount unit for lxd, revision 23687. | |
snap-core20-1627.mount | |
[ OK ] Mounted Mount unit for snapd, revision 17339. | |
snap-lxd-23687.mount | |
snap-snapd-17339.mount | |
[ OK ] Started Rule-based Manager for Device Events and Files. | |
systemd-udevd.service | |
Starting Show Plymouth Boot Screen... | |
[ OK ] Started Show Plymouth Boot Screen. | |
plymouth-start.service | |
[ OK ] Started Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Reached target Local Encrypted Volumes. | |
[ OK ] Found device /dev/ttyAML0. | |
[ OK ] Found device /dev/disk/by-label/system-boot. | |
Starting File System Checkv/disk/by-label/system-boot... | |
[ OK ] Started File System Check Daemon to report status. | |
systemd-fsckd.service | |
[ OK ] Finished File System Checkdev/disk/by-label/system-boot. | |
systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service | |
Mounting /boot/efi... | |
[ OK ] Mounted /boot/efi. | |
boot-efi.mount | |
[ OK ] Reached target Local File Systems. | |
Starting Set console font and keymap... | |
Starting Create final runtdir for shutdown pivot root... | |
Starting Tell Plymouth To Write Out Runtime Data... | |
Starting Commit a transient machine-id on disk... | |
Starting Create Volatile Files and DirectoriesL31]: tee size: 0 | |
[0m... | |
Starting Uncomplicated firewall... | |
[ OK ] Finished Create final runte dir for shutdown pivot root. | |
[ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
finalrd.service | |
plymouth-read-write.service | |
ufw.service | |
[ OK ] Finished Uncomplicated firewall. | |
systemd-tmpfiles-setup.service | |
[ OK ] Finished Create Volatile Files and Directories. | |
Starting Network Name Resolution... | |
Starting Network Time Synchronization... | |
Starting Record System Boot/Shutdown in UTMP... | |
Starting Initial cloud-init job (pre-networking)... | |
[ OK ] Finished Record System Boot/Shutdown in UTMP. | |
systemd-update-utmp.service | |
[ OK ] Finished Commit a transient machine-id on disk. | |
systemd-machine-id-commit.service | |
[ OK ] Started Network Time Synchronization. | |
[ OK ] Reached target System Time Set. | |
systemd-timesyncd.service | |
systemd-resolved.service | |
[ OK ] Started Network Name Resolution. | |
[ OK ] Reached target Host and Network Name Lookups. | |
Starting Load Kernel Module chromeos_pstore... | |
Starting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module pstore_blk... | |
Starting Load Kernel Module pstore_zone... | |
Starting Load Kernel Module ramoops... | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ 13.377784] cloud-init[581]: Cloud-init v. 22.3.4-0ubuntu1 running 'init-local' at Tue, 11 Oct 2022 15:51:31 +0000. Up 13.15 seconds. | |
[ OK ] Finished Set console font and keymap. | |
console-setup.service | |
[ 25.075153] cloud-init[581]: Generating public/private rsa key pair. | |
[ 25.075737] cloud-init[581]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key | |
[ 25.077693] cloud-init[581]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub | |
[ 25.079453] cloud-init[581]: The key fingerprint is: | |
[ 25.081231] cloud-init[581]: SHA256:OpSYTfHGstyW215yxC80seR17Y+skaibhQ6zSTzN4jY root@potato | |
[ 25.083290] cloud-init[581]: The key's randomart image is: | |
[ 25.084742] cloud-init[581]: +---[RSA 3072]----+ | |
[ 25.086120] cloud-init[581]: | . | | |
[ 25.087842] cloud-init[581]: | + .| | |
[ 25.089460] cloud-init[581]: | o + o . o| | |
[ 25.091010] cloud-init[581]: | * * . + + o | | |
[ 25.092607] cloud-init[581]: | o * S B .| | |
[ 25.094314] cloud-init[581]: | o = + + = ..| | |
[ 25.095817] cloud-init[581]: | X = = * + .| | |
[ 25.097387] cloud-init[581]: | oEX = + + | | |
[ 25.098741] cloud-init[581]: | .+.=.. . | | |
[ 25.100408] cloud-init[581]: +----[SHA256]-----+ | |
[ 25.101766] cloud-init[581]: Generating public/private dsa key pair. | |
[ 25.103040] cloud-init[581]: Your identification has been saved in /etc/ssh/ssh_host_dsa_key | |
[ 25.104422] cloud-init[581]: Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub | |
[ 25.105938] cloud-init[581]: The key fingerprint is: | |
[ 25.107288] cloud-init[581]: SHA256:52dBqvVsdKWRsgVb2dbBtg3QmBeLNKPCJAqOh5NakGo root@potato | |
[ 25.108748] cloud-init[581]: The key's randomart image is: | |
[ 25.110017] cloud-init[581]: +---[DSA 1024]----+ | |
[ 25.111321] cloud-init[581]: |... . . *=+=o| | |
[ 25.113178] cloud-init[581]: |.* . . + ooB==+| | |
[ 25.114606] cloud-init[581]: |* + . o . =.*o+| | |
[ 25.116113] cloud-init[581]: |oE . o + =.| | |
[ 25.117788] cloud-init[581]: |o S + + o | | |
[ 25.119317] cloud-init[581]: | = + o | | |
[ 25.121037] cloud-init[581]: | . . * | | |
[ 25.122691] cloud-init[581]: | + | | |
[ 25.124624] cloud-init[581]: | | | |
[ 25.126158] cloud-init[581]: +----[SHA256]-----+ | |
[ 25.127805] cloud-init[581]: Generating public/private ecdsa key pair. | |
[ 25.129416] cloud-init[581]: Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key | |
[ 25.130961] cloud-init[581]: Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub | |
[ 25.132335] cloud-init[581]: The key fingerprint is: | |
[ 25.133801] cloud-init[581]: SHA256:zl+4QFke+0S1+d2r/30J8HGPtwSPuw8SZpGISPDuGzo root@potato | |
[ 25.135532] cloud-init[581]: The key's randomart image is: | |
[ 25.136872] cloud-init[581]: +---[ECDSA 256]---+ | |
[ 25.138126] cloud-init[581]: | ... . | | |
[ 25.139347] cloud-init[581]: | o . . . .. o | | |
[ 25.140752] cloud-init[581]: | o . .oo. o | | |
[ 25.141850] cloud-init[581]: | . + =.o oo| | |
[ 25.143247] cloud-init[581]: | . S o++ *.=| | |
[ 25.144462] cloud-init[581]: | . + o+.+.o+| | |
[ 25.145789] cloud-init[581]: | o + ..o.+oo| | |
[ 25.147412] cloud-init[581]: | E. o o o..ooo| | |
[ 25.148987] cloud-init[581]: | ... o o+o=| | |
[ 25.150439] cloud-init[581]: +----[SHA256]-----+ | |
[ 25.151900] cloud-init[581]: Generating public/private ed25519 key pair. | |
[ 25.153575] cloud-init[581]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key | |
[ 25.154972] cloud-init[581]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub | |
[ 25.156651] cloud-init[581]: The key fingerprint is: | |
[ 25.158008] cloud-init[581]: SHA256:Hh07Ba4Ltu1VzauxDqFp3dW87k/8+XpXSvU8ZQB9XNQ root@potato | |
[ 25.159605] cloud-init[581]: The key's randomart image is: | |
[ 25.161006] cloud-init[581]: +--[ED25519 256]--+ | |
[ 25.162875] cloud-init[581]: | . .o o=| | |
[ 25.164229] cloud-init[581]: | . . o E| | |
[ 25.165641] cloud-init[581]: | o . o | | |
[ 25.166927] cloud-init[581]: | o + o o+| | |
[ 25.168187] cloud-init[581]: | o S = . ++=| | |
[ 25.169600] cloud-init[581]: | . = * = ..+=| | |
[ 25.170757] cloud-init[581]: | . B + o..o=| | |
[ 25.172176] cloud-init[581]: | o . . +o.=| | |
[ 25.173466] cloud-init[581]: | . .+ o*B| | |
[ 25.174821] cloud-init[581]: +----[SHA256]-----+ | |
[ OK ] Finished Initial cloud-init job (pre-networking). | |
cloud-init-local.service | |
[ OK ] Reached target Preparation for Network. | |
Starting Network Configuration... | |
[ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. | |
[ OK ] Started Network Configuration. | |
systemd-networkd.service | |
Starting Wait for Network to be Configured... | |
[ *** ] A start job is running for Wait for to be Configured (24s / no limit) | |
[*** ] A start job is running for Wait for to be Configured (25s / no limit) | |
[** ] A start job is running for Wait for to be Configured (25s / no limit) | |
[* ] A start job is running for Wait for to be Configured (26s / no limit) | |
[ OK ] Finished Wait for Network to be Configured. | |
systemd-networkd-wait-online.service | |
Starting Initial cloud-ini (metadata service crawler)... | |
[ 43.136861] cloud-init[868]: Cloud-init v. 22.3.4-0ubuntu1 running 'init' at Fri, 27 Jan 2023 01:34:16 +0000. Up 42.97 seconds. | |
[ 43.209052] cloud-init[868]: ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++ | |
[ 43.209508] cloud-init[868]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 43.211747] cloud-init[868]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address | | |
[ 43.213756] cloud-init[868]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 43.215934] cloud-init[868]: ci-info: | eth0 | True | 192.168.86.204 | 255.255.255.0 | global | d6:42:f4:77:0d:f6 | | |
[ 43.217938] cloud-init[868]: ci-info: | eth0 | True | fe80::d442:f4ff:fe77:df6/64 | . | link | d6:42:f4:77:0d:f6 | | |
[ 43.219975] cloud-init[868]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . | | |
[ 43.222022] cloud-init[868]: ci-info: | lo | True | ::1/128 | . | host | . | | |
[ 43.224208] cloud-init[868]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 43.226210] cloud-init[868]: ci-info: ++++++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++++ | |
[ 43.228337] cloud-init[868]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 43.230221] cloud-init[868]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags | | |
[ 43.232359] cloud-init[868]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 43.234523] cloud-init[868]: ci-info: | 0 | 0.0.0.0 | 192.168.86.1 | 0.0.0.0 | eth0 | UG | | |
[ 43.236306] cloud-init[868]: ci-info: | 1 | 192.168.86.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U | | |
[ 43.238035] cloud-init[868]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 43.240288] cloud-init[868]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++ | |
[ 43.242276] cloud-init[868]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 43.244423] cloud-init[868]: ci-info: | Route | Destination | Gateway | Interface | Flags | | |
[ 43.246195] cloud-init[868]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 43.248381] cloud-init[868]: ci-info: | 1 | fe80::/64 | :: | eth0 | U | | |
[ 43.250414] cloud-init[868]: ci-info: | 3 | local | :: | eth0 | U | | |
[ 43.252684] cloud-init[868]: ci-info: | 4 | multicast | :: | eth0 | U | | |
[ 43.254817] cloud-init[868]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ OK ] Finished Initial cloud-iniob (metadata service crawler). | |
[ OK ] Reached target Cloud-config availability. | |
[ OK ] Reached target System Initialization. | |
[ OK ] Started Daily apt download activities. | |
cloud-init.service | |
[ OK ] Started Daily apt upgrade and clean activities. | |
[ OK ] Started Daily dpkg database backup timer. | |
[ OK ] Started Periodic ext4 Onliata Check for All Filesystems. | |
[ OK ] Started Discard unused blocks once a week. | |
[ OK ] Started Daily rotation of log files. | |
[ OK ] Started Daily man-db regeneration. | |
[ OK ] Started Message of the Day. | |
[ OK ] Started Daily Cleanup of Temporary Directories. | |
[ OK ] Started Ubuntu Advantage Timer for running repeated jobs. | |
[ OK ] Reached target Path Units. | |
[ OK ] Listening on cloud-init hotplug hook socket. | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Listening on Open-iSCSI iscsid Socket. | |
Starting Socket activation for snappy daemon... | |
[ OK ] Listening on OpenBSD Secure Shell server socket. | |
[ OK ] Listening on UUID daemon activation socket. | |
Starting Create the default swapfile... | |
[ OK ] Listening on Socket activation for snappy daemon. | |
[ OK ] Reached target Socket Units. | |
[ OK ] Reached target Basic System. | |
Starting Save/Restore Sound Card State... | |
Starting D-Bus System Message Bus... | |
[ OK ] Started Save initial kernel messages after boot. | |
dmesg.service | |
Starting DUN service... | |
Starting Remove Stale Onlit4 Metadata Check Snapshots... | |
Starting Record successful boot for GRUB... | |
[ OK ] Started irqbalance daemon. | |
irqbalance.service | |
Starting Telephony service... | |
Starting System Logging Service... | |
[ OK ] Reached target Preparation for Logins. | |
Starting Snap Daemon... | |
Starting User Login Management... | |
[ OK ] Finished Save/Restore Sound Card State. | |
[ OK ] Reached target Sound Card. | |
alsa-restore.service | |
[ OK ] Started D-Bus System Message Bus. | |
dbus.service | |
Starting WPA supplicant... | |
[ OK ] Started DUN service. | |
dundee.service | |
[ OK ] Started Telephony service. | |
ofono.service | |
rsyslog.service | |
[ OK ] Started System Logging Service. | |
Mounting Arbitrary Executable File Formats File System... | |
[ OK ] Started User Login Management. | |
systemd-logind.service | |
[ OK ] Mounted Arbitrary Executable File Formats File System. | |
proc-sys-fs-binfmt_misc.mount | |
wpa_supplicant.service | |
[ OK ] Started WPA supplicant. | |
[ OK ] Reached target Network. | |
[ OK ] Reached target Network is Online. | |
[ OK ] Started Download data for ailed at package install time. | |
[ OK ] Started Check to see whethw version of Ubuntu available. | |
[ OK ] Reached target Timer Units. | |
[ OK ] Reached target Preparation for Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
Starting LSB: automatic crash report generation... | |
[ OK ] Finished Availability of block devices. | |
blk-availability.service | |
[ OK ] Started Regular background program processing daemon. | |
cron.service | |
Starting Pollinate to seedudo random number generator... | |
Starting LSB: rng-tools (Debian variant)... | |
Starting Permit User Sessions... | |
unattended-upgrades.service | |
[ OK ] Started Unattended Upgrades Shutdown. | |
[ OK ] Finished Permit User Sessions. | |
systemd-user-sessions.service | |
Starting Hold until boot process finishes up... | |
Starting Terminate Plymouth Boot Screen... | |
[ OK ] Finished Record successful boot for GRUB. | |
Ubuntu 22.10 potato ttyAML0 | |
potato login: [ 56.274420] cloud-init[1568]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:config' at Fri, 27 Jan 2023 01:34:28 +0000. Up 55.94 seconds. | |
[ 60.585513] cloud-init[1593]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:final' at Fri, 27 Jan 2023 01:34:33 +0000. Up 60.25 seconds. | |
ci-info: no authorized SSH keys fingerprints found for user ubuntu. | |
<14>Jan 27 01:34:34 cloud-init: ############################################################# | |
<14>Jan 27 01:34:34 cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS----- | |
<14>Jan 27 01:34:34 cloud-init: 1024 SHA256:52dBqvVsdKWRsgVb2dbBtg3QmBeLNKPCJAqOh5NakGo root@potato (DSA) | |
<14>Jan 27 01:34:34 cloud-init: 256 SHA256:zl+4QFke+0S1+d2r/30J8HGPtwSPuw8SZpGISPDuGzo root@potato (ECDSA) | |
<14>Jan 27 01:34:34 cloud-init: 256 SHA256:Hh07Ba4Ltu1VzauxDqFp3dW87k/8+XpXSvU8ZQB9XNQ root@potato (ED25519) | |
<14>Jan 27 01:34:34 cloud-init: 3072 SHA256:OpSYTfHGstyW215yxC80seR17Y+skaibhQ6zSTzN4jY root@potato (RSA) | |
<14>Jan 27 01:34:34 cloud-init: -----END SSH HOST KEY FINGERPRINTS----- | |
<14>Jan 27 01:34:34 cloud-init: ############################################################# | |
-----BEGIN SSH HOST KEY KEYS----- | |
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBLEM7QPw82cLWsqqiarH3zIQuLwfXoKmWPjVJLuNeOf1E4aX0YhJaTbQlSoCizIXiKKeNOl4/ecgbzEtxlvdMa4= root@potato | |
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJJxpSHzyZqqulPMX6pxMG320zGJFn+VPaTSpfUS5Av0 root@potato | |
ssh-rsa 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 root@potato | |
-----END SSH HOST KEY KEYS----- | |
[ 61.263334] cloud-init[1593]: Cloud-init v. 22.3.4-0ubuntu1 finished at Fri, 27 Jan 2023 01:34:34 +0000. Datasource DataSourceNoCloud [seed=/dev/mmcblk1p1][dsmode=local]. Up 61.22 seconds | |
ubuntu | |
Password: | |
You are required to change your password immediately (administrator enforced). | |
Changing password for ubuntu. | |
Current password: | |
New password: | |
Retype new password: | |
Welcome to Ubuntu 22.10 (GNU/Linux 6.0.12-00858-gb98721ea4575 aarch64) | |
* Documentation: https://help.ubuntu.com | |
* Management: https://landscape.canonical.com | |
* Support: https://ubuntu.com/advantage | |
System information as of Fri Jan 27 01:34:53 UTC 2023 | |
System load: 1.19677734375 Temperature: 34.0 C | |
Usage of /home: unknown Processes: 162 | |
Memory usage: 10% Users logged in: 0 | |
Swap usage: 0% IPv4 address for eth0: 192.168.86.204 | |
47 updates can be applied immediately. | |
39 of these updates are standard security updates. | |
To see these additional updates run: apt list --upgradable | |
The list of available updates is more than a week old. | |
To check for new updates run: sudo apt update | |
The programs included with the Ubuntu system are free software; | |
the exact distribution terms for each program are described in the | |
individual files in /usr/share/doc/*/copyright. | |
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by | |
applicable law. | |
To run a command as administrator (user "root"), use "sudo <command>". | |
See "man sudo_root" for details. | |
ubuntu@potato:~$ sudo shutdown -r now | |
ubuntu@potato:~$ | |
plymouth-reboot.service | |
Starting Tell Plymouth To Jump To initramfs... | |
Stopping User Runtime Directory /run/user/1000... | |
[ OK ] Unmounted /run/user/1000. | |
[ OK ] Stopped User Login Management. | |
[ OK ] Stopped User Runtime Directory /run/user/1000. | |
[ OK ] Finished Tell Plymouth To Jump To initramfs. | |
plymouth-switch-root-initramfs.service | |
[ OK ] Removed slice User Slice of UID 1000. | |
Stopping Permit User Sessions... | |
[ OK ] Stopped Create final runtime dir for shutdown pivot root. | |
[ OK ] Stopped Permit User Sessions. | |
[ OK ] Stopped target Network. | |
[ OK ] Stopped target Remote File Systems. | |
[ OK ] Stopped target Preparation for Remote File Systems. | |
Stopping WPA supplicant... | |
[ OK ] Stopped WPA supplicant. | |
[ OK ] Stopped target Basic System. | |
[ OK ] Stopped Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Stopped target Path Units. | |
[ OK ] Stopped target Slice Units. | |
[ OK ] Removed slice User and Session Slice. | |
[ OK ] Stopped target Socket Units. | |
[ OK ] Closed cloud-init hotplug hook socket. | |
[ OK ] Closed Open-iSCSI iscsid Socket. | |
[ OK ] Closed Socket unix for snap application lxd.daemon. | |
[ OK ] Closed Socket unix for snap application lxd.user-daemon. | |
[ OK ] Closed Socket activation for snappy daemon. | |
[ OK ] Closed OpenBSD Secure Shell server socket. | |
[ OK ] Closed Syslog Socket. | |
[ OK ] Closed UUID daemon activation socket. | |
[ OK ] Stopped target System Initialization. | |
[ OK ] Unset automount Arbitrary s File System Automount Point. | |
[ OK ] Stopped target Local Encrypted Volumes. | |
[ OK ] Stopped Forward Password Ruests to Wall Directory Watch. | |
[ OK ] Stopped target Local Integrity Protected Volumes. | |
[ OK ] Stopped target Local Verity Protected Volumes. | |
[ OK ] Stopped Initial cloud-initob (metadata service crawler). | |
[ OK ] Stopped Wait for Network to be Configured. | |
Stopping Network Configuration... | |
Stopping Network Name Resolution... | |
Stopping Network Time Synchronization... | |
Stopping Record System Boot/Shutdown in UTMP... | |
[ OK ] Stopped Network Name Resolution. | |
[ OK ] Stopped Network Time Synchronization. | |
[ OK ] Stopped Network Configuration. | |
[ OK ] Stopped target Preparation for Network. | |
[ OK ] Closed Network Service Netlink Socket. | |
[ OK ] Stopped Initial cloud-init job (pre-networking). | |
[ OK ] Stopped Apply Kernel Variables. | |
[ OK ] Stopped Load Kernel Modules. | |
[ OK ] Stopped Record System Boot/Shutdown in UTMP. | |
[ OK ] Stopped Create Volatile Files and Directories. | |
[ OK ] Stopped target Local File Systems. | |
Unmounting /boot/efi... | |
Unmounting /run/credentials/systemd-sysusers.service... | |
Unmounting /run/snapd/ns/lxd.mnt... | |
Unmounting Mount unit for core20, revision 1627... | |
Unmounting Mount unit for lxd, revision 23687... | |
Unmounting Mount unit for snapd, revision 17339... | |
[ OK ] Unmounted /boot/efi. | |
[ OK ] Unmounted /run/credentials/systemd-sysusers.service. | |
[ OK ] Unmounted /run/snapd/ns/lxd.mnt. | |
[ OK ] Unmounted Mount unit for core20, revision 1627. | |
[ OK ] Unmounted Mount unit for lxd, revision 23687. | |
[ OK ] Unmounted Mount unit for snapd, revision 17339. | |
Unmounting /run/snapd/ns... | |
[ OK ] Stopped File System Check dev/disk/by-label/system-boot. | |
[ OK ] Removed slice Slice /system/systemd-fsck. | |
[ OK ] Unmounted /run/snapd/ns. | |
[ OK ] Stopped target Preparation for Local File Systems. | |
[ OK ] Stopped target Swaps. | |
Deactivating swap /swapfile... | |
Stopping Monitoring of LVMmeventd or progress polling... | |
Stopping Device-Mapper Multipath Device Controller... | |
[ OK ] Stopped Create Static Device Nodes in /dev. | |
[ OK ] Stopped Create System Users. | |
[ OK ] Stopped Device-Mapper Multipath Device Controller. | |
[ OK ] Deactivated swap /swapfile. | |
[ OK ] Reached target Unmount All Filesystems. | |
[ OK ] Stopped Remount Root and Kernel File Systems. | |
[ OK ] Stopped Monitoring of LVM2 dmeventd or progress polling. | |
[ OK ] Reached target System Shutdown. | |
[ OK ] Reached target Late Shutdown Services. | |
[ OK ] Finished System Reboot. | |
[ OK ] Reached target System Reboot. | |
[ 101.343518] watchdog: watchdog0: watchdog did not stop! | |
[ 101.795810] watchdog: watchdog0: watchdog did not stop! | |
[ 102.294801] watchdog: watchdog0: watchdog did not stop! | |
[ 102.386517] reboot: Restarting system | |
bl31 reboot reason: 0xd | |
bl31 reboot reason: 0x0 | |
system cmd 1. | |
GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:10;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:11;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:12;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:13;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:14;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:15;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:16;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:17;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:18;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:19;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:20;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:21;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:22;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:23;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:24;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:25;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:26;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:27;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:28;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:29;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:30;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:31;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:32;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:33;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:34;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:35;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:36;USB:0;SPI:0;CHK:A7;GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:0;READ:0;0.0;CHK:0; | |
no sdio debug board detected | |
TE: 1947806 | |
BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz | |
set vcck to 1120 mv | |
set vddee to 1000 mv | |
Board ID = 3 | |
CPU clk: 1200MHz | |
DQS-corr enabled | |
DDR scramble enabled | |
DDR3 chl: Rank0+1 @ 912MHz | |
bist_test rank: 0 1b 03 33 28 13 3d 16 00 2d 2e 19 43 18 00 31 29 11 41 17 00 2f 2d 16 44 702 rank: 1 1b 06 31 28 12 3e 16 00 2d 2d 17 44 17 02 2d 28 12 3e 16 01 2b 2c 16 43 702 - PASS | |
Rank0: 1024MB(auto)-2T-13 | |
Rank1: 1024MB(auto)-2T-13 | |
AddrBus test pass! | |
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0 | |
New fip structure! | |
Load bl30 from SD, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0 | |
Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0 | |
Load bl33 from SD, src: 0x0004c200, des: 0x01000000, size: 0x00096a00, part: 0 | |
NOTICE: BL3-1: v1.0(release):53f813e | |
NOTICE: BL3-1: Built : 15:51:23, May 22 2019 | |
[BL31]: GXL CPU setup! | |
NOTICE: BL3-1: GXL normal boot! | |
NOTICE: BL3-1: BL33 decompress pass | |
mpu_config_enable:system pre init ok | |
dmc sec lock | |
[Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz] | |
OPS=0x85 | |
21 0e 85 00 59 17 cd 20 a3 4a 4a 10 e0 0f 05 28 | |
[2.556249 Inits done] | |
secure task start! | |
high task start! | |
low task start! | |
ERROR: Error initializing runtime service opteed_fast | |
<debug_uart> | |
U-Boot 2022.07+ (Nov 20 2022 - 18:31:28 -0500) Libre Computer Board AML-S905X-CC | |
Model: Libre Computer AML-S905X-CC | |
SoC: Amlogic Meson GXL (S905X) Revision 21:e (85:2) | |
DRAM: 2 GiB | |
Core: 177 devices, 29 uclasses, devicetree: separate | |
WDT: Not starting watchdog@98d0 | |
MMC: mmc@72000: 1, mmc@74000: 0 | |
Loading Environment from FAT... ** Bad device specification mmc 0 ** | |
** Bad device specification mmc 0 ** | |
Couldn't find partition mmc 0:1 | |
Error: could not access storage. | |
In: serial | |
Out: serial | |
Err: serial | |
[BL31]: tee size: 0 | |
Net: Fast Ethernet | |
[BL31]: tee size: 0 | |
Net: No ethernet found. | |
starting USB... | |
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2 | |
Register 2000140 NbrPorts 2 | |
Starting the controller | |
USB XHCI 1.00 | |
scanning bus usb@c9000000 for devices... 2 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Hit any key to stop autoboot: 1 0 | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
** Unable to read file ubootefi.var ** | |
Failed to load EFI variables | |
BootOrder not defined | |
EFI boot manager: Cannot load any image | |
Found EFI removable media binary efi/boot/bootaa64.efi | |
1890184 bytes read in 90 ms (20 MiB/s) | |
Booting /efi\boot\bootaa64.efi | |
EFI stub: Booting Linux Kernel... | |
EFI stub: Using DTB from configuration table | |
EFI stub: Exiting boot services... | |
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
[ 0.000000] Linux version 6.0.12-00858-gb98721ea4575 (autobuild@deb.libre.computer) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Thu Dec 8 19:08:19 UTC 2022 | |
[ 0.000000] Machine model: Libre Computer AML-S905X-CC | |
[ 0.000000] efi: EFI v2.90 by Das U-Boot | |
[ 0.000000] efi: ESRT=0x7ae51040 RTPROP=0x7ae53040 SMBIOS=0x7ae55000 RNG=0x57f8c040 MEMRESERVE=0x57f8b040 | |
[ 0.000000] efi: seeding entropy pool | |
[ 0.000000] random: crng init done | |
[ 0.000000] esrt: Reserving ESRT space from 0x000000007ae51040 to 0x000000007ae51078. | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] DMA32 empty | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] | |
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] | |
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] | |
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] | |
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007ae52fff] | |
[ 0.000000] node 0: [mem 0x000000007ae53000-0x000000007ae53fff] | |
[ 0.000000] node 0: [mem 0x000000007ae54000-0x000000007ae54fff] | |
[ 0.000000] node 0: [mem 0x000000007ae55000-0x000000007ae57fff] | |
[ 0.000000] node 0: [mem 0x000000007ae58000-0x000000007ae58fff] | |
[ 0.000000] node 0: [mem 0x000000007ae59000-0x000000007ae5cfff] | |
[ 0.000000] node 0: [mem 0x000000007ae5d000-0x000000007de7ffff] | |
[ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff] | |
[ 0.000000] node 0: [mem 0x000000007de90000-0x000000007fe5afff] | |
[ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv0.2 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: Trusted OS migration not required | |
[ 0.000000] percpu: Embedded 20 pages/cpu s43176 r8192 d30552 u81920 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
[ 0.000000] CPU features: detected: ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575 root=UUID=672a0911-0909-4a3e-bb4a-772b26b8b543 ro noquiet splash vt.handoff=7 | |
[ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 1684108K/2097152K available (14784K kernel code, 1952K rwdata, 6028K rodata, 3712K init, 505K bss, 150900K reserved, 262144K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] Dynamic Preempt: full | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU event tracing is enabled. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
[ 0.000000] Trampoline variant of Tasks RCU enabled. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.000642] Console: colour dummy device 80x25 | |
[ 0.001160] printk: console [tty0] enabled | |
[ 0.001202] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
[ 0.001226] pid_max: default: 32768 minimum: 301 | |
[ 0.001290] LSM: Security Framework initializing | |
[ 0.001316] Yama: becoming mindful. | |
[ 0.001436] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.001463] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.002768] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.002811] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.002881] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.003017] rcu: Hierarchical SRCU implementation. | |
[ 0.003031] rcu: Max phase no-delay instances is 1000. | |
[ 0.004249] Remapping and enabling EFI services. | |
[ 0.004611] smp: Bringing up secondary CPUs ... | |
[ 0.005124] Detected VIPT I-cache on CPU1 | |
[ 0.005257] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
[ 0.005853] Detected VIPT I-cache on CPU2 | |
[ 0.005972] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
[ 0.006539] Detected VIPT I-cache on CPU3 | |
[ 0.006656] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
[ 0.006744] smp: Brought up 1 node, 4 CPUs | |
[ 0.006813] SMP: Total of 4 processors activated. | |
[ 0.006825] CPU features: detected: 32-bit EL0 Support | |
[ 0.006836] CPU features: detected: 32-bit EL1 Support | |
[ 0.006850] CPU features: detected: CRC32 instructions | |
[ 0.007322] CPU: All CPU(s) started at EL2 | |
[ 0.007359] alternatives: patching kernel code | |
[ 0.008764] devtmpfs: initialized | |
[ 0.014228] Registered cp15_barrier emulation handler | |
[ 0.014268] Registered setend emulation handler | |
[ 0.014448] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.014484] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.020587] pinctrl core: initialized pinctrl subsystem | |
[ 0.021138] SMBIOS 3.0 present. | |
[ 0.021170] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022 | |
[ 0.021616] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.022697] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.023000] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
[ 0.023166] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.023256] audit: initializing netlink subsys (disabled) | |
[ 0.023462] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
[ 0.024701] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.024717] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.024738] thermal_sys: Registered thermal governor 'power_allocator' | |
[ 0.024994] cpuidle: using governor menu | |
[ 0.025178] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.025293] ASID allocator initialised with 32768 entries | |
[ 0.037765] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039057] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039488] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx | |
[ 0.041617] KASLR enabled | |
[ 0.048421] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
[ 0.048455] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page | |
[ 0.048471] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
[ 0.048516] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page | |
[ 0.048530] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
[ 0.048542] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page | |
[ 0.048557] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
[ 0.048569] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
[ 0.116590] raid6: neonx8 gen() 2141 MB/s | |
[ 0.184668] raid6: neonx4 gen() 2193 MB/s | |
[ 0.252734] raid6: neonx2 gen() 2086 MB/s | |
[ 0.320820] raid6: neonx1 gen() 1816 MB/s | |
[ 0.388873] raid6: int64x8 gen() 1490 MB/s | |
[ 0.456952] raid6: int64x4 gen() 1661 MB/s | |
[ 0.525021] raid6: int64x2 gen() 1418 MB/s | |
[ 0.593100] raid6: int64x1 gen() 1052 MB/s | |
[ 0.593112] raid6: using algorithm neonx4 gen() 2193 MB/s | |
[ 0.661159] raid6: .... xor() 1580 MB/s, rmw enabled | |
[ 0.661172] raid6: using neon recovery algorithm | |
[ 0.661373] fbcon: Taking over console | |
[ 0.662756] iommu: Default domain type: Passthrough | |
[ 0.663111] SCSI subsystem initialized | |
[ 0.663497] usbcore: registered new interface driver usbfs | |
[ 0.663545] usbcore: registered new interface driver hub | |
[ 0.663585] usbcore: registered new device driver usb | |
[ 0.663862] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.663876] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.663901] PTP clock support registered | |
[ 0.664033] EDAC MC: Ver: 3.0.0 | |
[ 0.664565] Registered efivars operations | |
[ 0.664927] FPGA manager framework | |
[ 0.665041] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.665652] NetLabel: Initializing | |
[ 0.665671] NetLabel: domain hash size = 128 | |
[ 0.665682] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ 0.665741] NetLabel: unlabeled traffic allowed by default | |
[ 0.666179] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.666413] VFS: Disk quotas dquot_6.6.0 | |
[ 0.666465] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 0.671811] NET: Registered PF_INET protocol family | |
[ 0.671993] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.673646] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
[ 0.673741] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.673769] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
[ 0.673896] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
[ 0.674107] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 0.674370] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) | |
[ 0.674464] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.674518] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.674687] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.675125] RPC: Registered named UNIX socket transport module. | |
[ 0.675159] RPC: Registered udp transport module. | |
[ 0.675170] RPC: Registered tcp transport module. | |
[ 0.675180] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.675197] NET: Registered PF_XDP protocol family | |
[ 0.675219] PCI: CLS 0 bytes, default 64 | |
[ 0.675420] Trying to unpack rootfs image as initramfs... | |
[ 0.686953] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
[ 0.687521] kvm [1]: IPA Size Limit: 40 bits | |
[ 0.688780] kvm [1]: vgic interrupt IRQ9 | |
[ 0.688917] kvm [1]: Hyp mode initialized successfully | |
[ 0.690458] Initialise system trusted keyrings | |
[ 0.690720] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
[ 0.696510] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.697166] NFS: Registering the id_resolver key type | |
[ 0.697224] Key type id_resolver registered | |
[ 0.697239] Key type id_legacy registered | |
[ 0.697329] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.697347] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 0.697534] SGI XFS with ACLs, security attributes, no debug enabled | |
[ 0.698939] 9p: Installing v9fs 9p2000 file system support | |
[ 0.736186] xor: measuring software checksum speed | |
[ 0.740284] 8regs : 2442 MB/sec | |
[ 0.744252] 32regs : 2522 MB/sec | |
[ 0.748418] arm64_neon : 2405 MB/sec | |
[ 0.748456] xor: using function: 32regs (2522 MB/sec) | |
[ 0.748479] Key type asymmetric registered | |
[ 0.748491] Asymmetric key parser 'x509' registered | |
[ 0.947114] Freeing initrd memory: 27116K | |
[ 0.960609] alg: self-tests for CTR-KDF (hmac(sha256)) passed | |
[ 0.960724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
[ 0.960844] io scheduler mq-deadline registered | |
[ 0.960860] io scheduler kyber registered | |
[ 0.960907] io scheduler bfq registered | |
[ 0.961714] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized | |
[ 0.977476] soc soc0: Amlogic Meson GXL (S905X) Revision 21:e (85:2) Detected | |
[ 0.981822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.989930] loop: module loaded | |
[ 0.994235] tun: Universal TUN/TAP device driver, 1.6 | |
[ 0.995245] VFIO - User Level meta-driver version: 0.3 | |
[ 0.996416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 0.996448] ehci-pci: EHCI PCI platform driver | |
[ 0.996493] ehci-platform: EHCI generic platform driver | |
[ 0.996614] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 0.996652] ohci-pci: OHCI PCI platform driver | |
[ 0.996700] ohci-platform: OHCI generic platform driver | |
[ 0.997079] usbcore: registered new interface driver usb-storage | |
[ 0.997767] i2c_dev: i2c /dev entries driver | |
[ 1.001567] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.001602] sdhci: Copyright(c) Pierre Ossman | |
[ 1.001986] Synopsys Designware Multimedia Card Interface Driver | |
[ 1.002576] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.003564] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 1.004535] meson-sm: secure-monitor enabled | |
[ 1.005116] hid: raw HID events driver (C) Jiri Kosina | |
[ 1.005248] usbcore: registered new interface driver usbhid | |
[ 1.005264] usbhid: USB HID core driver | |
[ 1.005629] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered | |
[ 1.009409] NET: Registered PF_PACKET protocol family | |
[ 1.009745] 9pnet: Installing 9P2000 support | |
[ 1.009839] Key type dns_resolver registered | |
[ 1.010292] registered taskstats version 1 | |
[ 1.010330] Loading compiled-in X.509 certificates | |
[ 1.012585] zswap: loaded using pool zstd/z3fold | |
[ 1.013745] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no | |
[ 1.033329] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart | |
[ 2.351661] printk: console [ttyAML0] enabled | |
[ 2.361283] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq | |
[ 2.362043] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware | |
domain-0 init dvfs: 4 | |
[ 2.384943] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 | |
[ 2.384984] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 | |
[ 2.397349] meson-gx-mmc d0074000.mmc: no support for card's volts | |
[ 2.397894] mmc0: error -22 whilst initialising SDIO card | |
[ 2.913300] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator | |
[ 2.914990] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator | |
[ 2.923275] dwc2 c9100000.usb: Controller does not support host mode. | |
[ 2.928302] dwc2: probe of c9100000.usb failed with error -22 | |
[ 2.937614] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 2.939448] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
[ 2.947119] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports | |
[ 2.952921] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 | |
[ 2.962273] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000 | |
[ 2.968349] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 | |
[ 2.976303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.983462] usb usb1: Product: xHCI Host Controller | |
[ 2.988278] usb usb1: Manufacturer: Linux 6.0.12-00858-gb98721ea4575 xhci-hcd | |
[ 2.995352] usb usb1: SerialNumber: xhci-hcd.0.auto | |
[ 3.000631] hub 1-0:1.0: USB hub found | |
[ 3.003934] hub 1-0:1.0: 2 ports detected | |
[ 3.010635] meson-gx-mmc d0072000.mmc: Got CD GPIO | |
[ 3.011179] of_cfs_init | |
[ 3.015097] of_cfs_init: OK | |
[ 3.018003] ALSA device list: | |
[ 3.020744] No soundcards found. | |
[ 3.043001] Freeing unused kernel memory: 3712K | |
[ 3.043165] Run /init as init process | |
Loading, please wait... | |
Starting version 251.4-1ubuntu7 | |
[ 3.162521] mmc1: new ultra high speed SDR50 SDXC card at address aaaa | |
[ 3.164150] mmcblk1: mmc1:aaaa SN64G 59.5 GiB | |
[ 3.170348] mmcblk1: p1 p2 | |
[ 3.266249] usb 1-1: new high-speed USB device number 2 using xhci-hcd | |
[ 3.296820] BTRFS: device label writable devid 1 transid 442 /dev/mmcblk1p2 scanned by systemd-udevd (177) | |
[ 3.415768] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 | |
[ 3.418381] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 3.425430] usb 1-1: Product: USB2.0 Hub | |
[ 3.518612] mmc0: Card stuck being busy! __mmc_poll_for_busy | |
[ 3.521233] hub 1-1:1.0: USB hub found | |
[ 3.522796] hub 1-1:1.0: 4 ports detected | |
[ 3.561607] [drm] Initialized simpledrm 1.0.0 20200625 for 7fe5b000.framebuffer on minor 0 | |
[ 3.571430] Console: switching to colour frame buffer device 90x36 | |
[ 3.583118] simple-framebuffer 7fe5b000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device | |
[ 3.614460] meson-drm d0100000.vpu: Queued 2 outputs on vpu | |
[ 3.616908] simple-framebuffer simple-framebuffer.0: [drm] *ERROR* could not acquire memory range [mem 0x7fe5b000-0x7ffeffff flags 0x200]: error -16 | |
[ 3.628281] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16 | |
[ 3.638292] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 | |
[ 3.642573] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 | |
[ 3.648667] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 | |
[ 3.658467] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 | |
[ 3.659246] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found | |
[ 3.660471] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.667008] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found | |
[ 3.675056] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.681411] meson8b-dwmac c9410000.ethernet: PTP uses main clock | |
[ 3.695696] lima d00c0000.gpu: bus rate = 166666667 | |
[ 3.700367] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 | |
[ 3.709042] lima d00c0000.gpu: mod rate = 24000000 | |
[ 3.710392] meson8b-dwmac c9410000.ethernet: DWMAC1000 | |
[ 3.717182] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported | |
[ 3.724552] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported | |
[ 3.727523] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found | |
[ 3.731897] meson8b-dwmac c9410000.ethernet: COE Type 2 | |
[ 3.731910] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported | |
[ 3.731914] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported | |
[ 3.753431] meson8b-dwmac c9410000.ethernet: Normal descriptors | |
[ 3.764617] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 | |
[ 3.766506] meson8b-dwmac c9410000.ethernet: Ring mode enabled | |
[ 3.799074] Console: switching to colour dummy device 80x25 | |
[ 3.801322] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
[ 3.837865] Trying to free nonexistent resource <000000007fe5b000-000000007ffeffff> | |
[ 3.890309] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) | |
[ 3.906126] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver | |
[ 3.914026] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) | |
[ 3.945062] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 2 | |
[ 3.954131] Console: switching to colour frame buffer device 90x36 | |
[ 3.977838] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device | |
Begin: Loading essential drivers ... [ 5.344271] async_tx: api initialized (async) | |
done. | |
Begin: Running /scripts/init-premount ... done. | |
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems | |
done. | |
Begin: Will now check root file system ... fsck from util-linux 2.38 | |
[/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 | |
done. | |
[ 5.655064] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm | |
[ 5.657948] BTRFS info (device mmcblk1p2): disk space caching is enabled | |
[ 5.677048] BTRFS info (device mmcblk1p2): enabling ssd optimizations | |
done. | |
Begin: Running /scripts/local-bottom ... done. | |
Begin: Running /scripts/init-bottom ... done. | |
[ 6.275863] systemd[1]: System time before build time, advancing clock. | |
[ 6.352163] NET: Registered PF_INET6 protocol family | |
[ 6.374545] Segment Routing with IPv6 | |
[ 6.374650] RPL Segment Routing with IPv6 | |
[ 6.376655] In-situ OAM (IOAM) with IPv6 | |
[ 6.445698] systemd[1]: systemd 251.4-1ubuntu7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
[ 6.473260] systemd[1]: Detected architecture arm64. | |
Welcome to Ubuntu 22.10! | |
[ 6.481879] systemd[1]: Hostname set to <potato>. | |
-.mount | |
[ 7.285912] systemd[1]: Queued start job for default target Graphical Interface. | |
[ 7.386528] systemd[1]: Created slice Slice /system/modprobe. | |
[ 7.389287] systemd[1]: Created slice Slice /system/serial-getty. | |
2m [ 7.395778] systemd[1]: Created slice Slice /system/systemd-fsck. | |
OK ] Created slice systemd[1]: Created slice User and Session Slice. | |
[0;1;39mSlice /system/modprobe 7.410822] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
m. | |
[ OK ] Created [ 7.421760] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
slice Slice /system/serial-getty. | |
[ OK ] Created slice 7.434983] systemd[1]: Reached target Local Integrity Protected Volumes. | |
0;1;39mSlice /system/systemd-fsck. | |
[ OK ] Crea[ 7.447168] systemd[1]: Reached target Slice Units. | |
ted slice User and Session Slice. | |
[ OK 7.457537] systemd[1]: Reached target Local Verity Protected Volumes. | |
0m] Started Forward Pa[ 7.469767] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
ssword Ruests to Wall Directory Watch. | |
[ OK[ 7.480196] systemd[1]: Listening on LVM2 poll daemon socket. | |
] Set up automount [ 7.490399] systemd[1]: Listening on multipathd control socket. | |
Arbitrarys Fi[ 7.498427] systemd[1]: Listening on Syslog Socket. | |
le System Automount Poin[ 7.504286] systemd[1]: Listening on fsck to fsckd communication Socket. | |
t. | |
[ OK systemd[1]: Listening on initctl Compatibility Named Pipe. | |
[0m] Reached target 7.521851] systemd[1]: Listening on Journal Audit Socket. | |
1;39mLocal Integrity Prot[ 7.529049] systemd[1]: Listening on Journal Socket (/dev/log). | |
ected Volumes. | |
[ 7.537196] systemd[1]: Listening on Journal Socket. | |
;32m OK ] Reached t[ 7.544384] systemd[1]: Listening on Network Service Netlink Socket. | |
arget Slice Unit[ 7.553910] systemd[1]: Listening on udev Control Socket. | |
s. | |
[ OK 7.560095] systemd[1]: Listening on udev Kernel Socket. | |
0m] Reached target Local Verity Protected Volumes. | |
[ OK ] Listening on Device-mapper event daemon FIFOs. | |
[ OK ] Listening on LVM2 poll daemon socket. | |
[ OK ] Listening on multipathd control socket. | |
[ OK ] Listening on Syslog Socket. | |
[ OK [ 7.598541] systemd[1]: Mounting Huge Pages File System... | |
] Listening on fsck to fsckd communication Socket. | |
[ 7.611008] systemd[1]: Mounting POSIX Message Queue File System... | |
0;32m OK ] Listening on initctl Compatibility Nam[ 7.622281] systemd[1]: Mounting Kernel Debug File System... | |
ed Pipe. | |
[ OK systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
[0m] Listening on Journal Audit Socket. | |
[ OK ] Li[ 7.647735] systemd[1]: Starting Journal Service... | |
stening on Journal Socket (/dev/log). | |
[ OK ] Listening on Jo[ 7.662372] systemd[1]: Starting Set the console keyboard layout... | |
urnal Socket. | |
[ OK ] Listening on Network Service Netlink Sock[ 7.674849] systemd[1]: Starting Create List of Static Device Nodes... | |
et. | |
[ OK ] Listening on udev Control Socket. | |
[ OK ][ 7.690539] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
Listening on udev Kernel Socket. | |
[ 7.704238] systemd[1]: LXD - agent was skipped because of a failed condition check (ConditionPathExists=/dev/virtio-ports/org.linuxcontainers.lxd). | |
Mounting Huge [ 7.722432] systemd[1]: Starting Load Kernel Module chromeos_pstore... | |
Pages File System... | |
Mounting POSIX Message Queue File System... | |
Mounting Kern[ 7.737211] systemd[1]: Starting Load Kernel Module configfs... | |
el Debug File System... | |
Starting Journal Service... | |
Starting 7.752653] systemd[1]: Starting Load Kernel Module drm... | |
;39mSet the console keyboard layout... | |
Starting Create List of Static Device Node[ 7.767580] systemd[1]: Starting Load Kernel Module efi_pstore... | |
s... | |
Starting Monitoring of LVMmeve[ 7.780538] systemd[1]: Starting Load Kernel Module fuse... | |
ntd or progress polling... | |
Starting Load Kernel Module chromeos_pstore... | |
St[ 7.791099] systemd[1]: Starting Load Kernel Module pstore_blk... | |
arting Load Kernel Module configfs... | |
Starting Load Kernel Modu[ 7.808223] fuse: init (API version 7.36) | |
le drm... | |
St[ 7.814686] systemd[1]: Starting Load Kernel Module pstore_zone... | |
arting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module fuse..[ 7.832244] systemd[1]: Starting Load Kernel Module ramoops... | |
. | |
Starting Load Kernel Module pstore_blk[ 7.843046] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of a failed condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). | |
... | |
Starting 7.860012] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
1;39mLoad Kernel Module pstore_zone... | |
Starting Load Kernel Module ramoops... | |
[ 7.923056] systemd[1]: Starting Load Kernel Modules... | |
Starting Load Kernel Modules... | |
[ 7.931282] systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting Remount Root and Kernel File Syst[ 7.937782] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. | |
ems... | |
[ 7.949147] systemd[1]: Starting Coldplug All udev Devices... | |
[ 7.949707] Asymmetric key parser 'pkcs8' registered | |
[ 7.962636] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3 | |
Starting Coldplug All udev Devices... | |
[ 7.986454] systemd[1]: Started Journal Service. | |
[ OK ] Started Journal Service. | |
systemd-journald.service | |
[ OK ] Mounted Huge Pages File System. | |
dev-hugepages.mount | |
[ OK ] Mounted POSIX Message Queue File System. | |
[ OK ] Mounted Kernel Debug File System. | |
[ OK ] Finished Create List of Static Device Nodes. | |
dev-mqueue.mount | |
[ OK ] Finished Monitoring of LVM dmeventd or progress polling. | |
sys-kernel-debug.mount | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module configfs. | |
kmod-static-nodes.service | |
[ OK ] Finished Load Kernel Module drm. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module fuse. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
lvm2-monitor.service | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ OK ] Finished Load Kernel Modules. | |
[ OK ] Finished Remount Root and Kernel File Systems. | |
systemd-modules-load.service | |
systemd-remount-fs.service | |
Mounting FUSE Control File System... | |
Mounting Kernel Configuration File System... | |
Starting Device-Mapper Multipath Device Controller... | |
Starting Flush Journal to Persistent Storage... | |
Starting Load/Save Random Seed... | |
Starting Apply Kernel Variables... | |
Starting Create System Users... | |
[ 8.158610] alua: device handler registered | |
[ 8.162477] emc: device handler registered | |
run-credentials-systemd\x2dsysusers.service.mount | |
[ 8.174714] systemd-journald[393]: Received client request to flush runtime journal. | |
[ OK ] Mounted FUSE Control File System. | |
sys-fs-fuse-connections.mount | |
[ OK 8.189023] systemd-journald[393]: File /var/log/journal/3dc7088238283ab098a6590663982acf/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
[ 8.189504] rdac: device handler registered | |
0m] Mounted Kernel Configuration File System. | |
sys-kernel-config.mount | |
systemd-sysctl.service | |
[ OK ] Finished Apply Kernel Variables. | |
[ OK ] Finished Load/Save Random Seed. | |
systemd-random-seed.service | |
[ OK ] Finished Create System Users. | |
systemd-sysusers.service | |
Starting Create Static Device Nodes in /dev... | |
[ OK ] Finished Coldplug All udev Devices. | |
systemd-udev-trigger.service | |
[ OK ] Finished Flush Journal to Persistent Storage. | |
systemd-journal-flush.service | |
[ OK ] Finished Create Static Device Nodes in /dev. | |
systemd-tmpfiles-setup-dev.service | |
Starting Rule-based Managefor Device Events and Files... | |
multipathd.service | |
[ OK ] Started Device-Mapper Multipath Device Controller. | |
[ OK ] Started Rule-based Manager for Device Events and Files. | |
systemd-udevd.service | |
[ OK ] Found device /dev/ttyAML0. | |
[ OK ] Found device /dev/disk/by-label/system-boot. | |
[BL31]: tee size: 0 | |
Starting Load Kernel Module chromeos_pstore... | |
Starting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module pstore_blk... | |
Starting Load Kernel Module pstore_zone... | |
Starting Load Kernel Module ramoops... | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ OK ] Finished Set the console keyboard layout. | |
[ OK ] Reached target Preparation for Local File Systems. | |
keyboard-setup.service | |
Mounting Mount unit for core20, revision 1627... | |
Mounting Mount unit for lxd, revision 23687... | |
Mounting Mount unit for snapd, revision 17339... | |
Starting Show Plymouth Boot Screen... | |
Starting File System Checkv/disk/by-label/system-boot... | |
[ OK ] Mounted Mount unit for core20, revision 1627. | |
snap-core20-1627.mount | |
[ OK ] Mounted Mount unit for lxd, revision 23687. | |
snap-lxd-23687.mount | |
[ OK ] Mounted Mount unit for snapd, revision 17339. | |
snap-snapd-17339.mount | |
[ OK ] Started File System Check Daemon to report status. | |
systemd-fsckd.service | |
[ OK ] Started Show Plymouth Boot Screen. | |
plymouth-start.service | |
[ OK ] Started Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Reached target Local Encrypted Volumes. | |
[ OK ] Finished File System Checkdev/disk/by-label/system-boot. | |
systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service | |
Mounting /boot/efi... | |
[ OK ] Mounted /boot/efi. | |
[ OK ] Reached target Local File Systems. | |
boot-efi.mount | |
Starting Set console font and keymap... | |
Starting Create final runtdir for shutdown pivot root... | |
Starting Tell Plymouth To Write Out Runtime Data... | |
Starting Create Volatile Files and Directories... | |
Starting Uncomplicated firewall... | |
[ OK ] Finished Create final runte dir for shutdown pivot root. | |
finalrd.service | |
[ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
plymouth-read-write.service | |
[ OK ] Finished Uncomplicated firewall. | |
ufw.service | |
[ OK ] Finished Create Volatile Files and Directories. | |
systemd-tmpfiles-setup.service | |
Starting Network Name Resolution... | |
Starting Network Time Synchronization... | |
Starting Record System Boot/Shutdown in UTMP... | |
Starting Initial cloud-init job (pre-networking)... | |
systemd-update-utmp.service | |
[ OK ] Finished Record System Boot/Shutdown in UTMP. | |
[ OK ] Started Network Time Synchronization. | |
systemd-timesyncd.service | |
[ OK ] Reached target System Time Set. | |
[ OK ] Started Network Name Resolution. | |
[ OK ] Reached target Host and Network Name Lookups. | |
systemd-resolved.service | |
[ OK ] Finished Set console font and keymap. | |
console-setup.service | |
[ 15.403297] cloud-init[784]: Cloud-init v. 22.3.4-0ubuntu1 running 'init-local' at Fri, 27 Jan 2023 01:35:15 +0000. Up 15.23 seconds. | |
[ OK ] Finished Initial cloud-init job (pre-networking). | |
[ OK ] Reached target Preparation for Network. | |
cloud-init-local.service | |
Starting Network Configuration... | |
[ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. | |
[ OK ] Started Network Configuration. | |
systemd-networkd.service | |
Starting Wait for Network to be Configured... | |
[ OK ] Finished Wait for Network to be Configured. | |
systemd-networkd-wait-online.service | |
Starting Initial cloud-ini (metadata service crawler)... | |
[ 34.462925] cloud-init[834]: Cloud-init v. 22.3.4-0ubuntu1 running 'init' at Fri, 27 Jan 2023 01:37:51 +0000. Up 34.29 seconds. | |
[ 34.534684] cloud-init[834]: ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++ | |
[ 34.535113] cloud-init[834]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 34.537545] cloud-init[834]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address | | |
[ 34.539542] cloud-init[834]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 34.542005] cloud-init[834]: ci-info: | eth0 | True | 192.168.86.204 | 255.255.255.0 | global | d6:42:f4:77:0d:f6 | | |
[ 34.544158] cloud-init[834]: ci-info: | eth0 | True | fe80::d442:f4ff:fe77:df6/64 | . | link | d6:42:f4:77:0d:f6 | | |
[ 34.546645] cloud-init[834]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . | | |
[ 34.548697] cloud-init[834]: ci-info: | lo | True | ::1/128 | . | host | . | | |
[ 34.551137] cloud-init[834]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 34.553531] cloud-init[834]: ci-info: ++++++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++++ | |
[ 34.555918] cloud-init[834]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 34.558220] cloud-init[834]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags | | |
[ 34.560804] cloud-init[834]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 34.563004] cloud-init[834]: ci-info: | 0 | 0.0.0.0 | 192.168.86.1 | 0.0.0.0 | eth0 | UG | | |
[ 34.565158] cloud-init[834]: ci-info: | 1 | 192.168.86.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U | | |
[ 34.567248] cloud-init[834]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 34.569648] cloud-init[834]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++ | |
[ 34.571721] cloud-init[834]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 34.573998] cloud-init[834]: ci-info: | Route | Destination | Gateway | Interface | Flags | | |
[ 34.576114] cloud-init[834]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 34.578355] cloud-init[834]: ci-info: | 1 | fe80::/64 | :: | eth0 | U | | |
[ 34.580541] cloud-init[834]: ci-info: | 3 | local | :: | eth0 | U | | |
[ 34.582920] cloud-init[834]: ci-info: | 4 | multicast | :: | eth0 | U | | |
[ 34.585030] cloud-init[834]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ OK ] Finished Initial cloud-iniob (metadata service crawler). | |
[ OK ] Reached target Cloud-config availability. | |
cloud-init.service | |
Activating swap /swapfile... | |
[ OK ] Activated swap /swapfile. | |
[ OK ] Reached target Swaps. | |
[ OK ] Reached target System Initialization. | |
swapfile.swap | |
[ OK ] Started Daily apt download activities. | |
[ OK ] Started Daily apt upgrade and clean activities. | |
[ OK ] Started Daily dpkg database backup timer. | |
[ OK ] Started Periodic ext4 Onliata Check for All Filesystems. | |
[ OK ] Started Discard unused blocks once a week. | |
[ OK ] Started Daily rotation of log files. | |
[ OK ] Started Daily man-db regeneration. | |
[ OK ] Started Message of the Day. | |
[ OK ] Started Daily Cleanup of Temporary Directories. | |
[ OK ] Started Ubuntu Advantage Timer for running repeated jobs. | |
[ OK ] Reached target Path Units. | |
[ OK ] Listening on cloud-init hotplug hook socket. | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Listening on Open-iSCSI iscsid Socket. | |
[ OK ] Listening on Socket unix for snap application lxd.daemon. | |
[ OK ] Listening on Socket unix fp application lxd.user-daemon. | |
Starting Socket activation for snappy daemon... | |
[ OK ] Listening on OpenBSD Secure Shell server socket. | |
[ OK ] Listening on UUID daemon activation socket. | |
[ OK ] Listening on Socket activation for snappy daemon. | |
[ OK ] Reached target Socket Units. | |
[ OK ] Reached target Basic System. | |
Starting Save/Restore Sound Card State... | |
Starting D-Bus System Message Bus... | |
[ OK ] Started Save initial kernel messages after boot. | |
dmesg.service | |
Starting DUN service... | |
Starting Remove Stale Onlit4 Metadata Check Snapshots... | |
Starting Record successful boot for GRUB... | |
[ OK ] Started irqbalance daemon. | |
irqbalance.service | |
Starting Telephony service... | |
Starting System Logging Service... | |
[ OK ] Reached target Preparation for Logins. | |
Starting Snap Daemon... | |
Starting User Login Management... | |
[ OK ] Finished Save/Restore Sound Card State. | |
[ OK ] Reached target Sound Card. | |
[ OK ] Started D-Bus System Message Bus. | |
alsa-restore.service | |
dbus.service | |
Starting WPA supplicant... | |
[ OK ] Started Telephony service. | |
[ OK ] Started DUN service. | |
ofono.service | |
dundee.service | |
Mounting Arbitrary Executable File Formats File System... | |
[ OK ] Finished Record successful boot for GRUB. | |
Starting GRUB failed boot detection... | |
[ OK ] Mounted Arbitrary Executable File Formats File System. | |
proc-sys-fs-binfmt_misc.mount | |
[ OK ] Started System Logging Service. | |
rsyslog.service | |
[ OK ] Started WPA supplicant. | |
[ OK ] Reached target Network. | |
[ OK ] Reached target Network is Online. | |
[ OK ] Started Download data for ailed at package install time. | |
[ OK ] Started Check to see whethw version of Ubuntu available. | |
[ OK ] Reached target Timer Units. | |
[ OK ] Reached target Preparation for Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
wpa_supplicant.service | |
blk-availability.service | |
Starting LSB: automatic crash report generation... | |
[ OK ] Finished Availability of block devices. | |
[ OK ] Started Regular background program processing daemon. | |
cron.service | |
Starting LSB: rng-tools (Debian variant)... | |
Starting Service for snap application lxd.activate... | |
Starting Permit User Sessions... | |
[ OK ] Finished Remove Stale Onliext4 Metadata Check Snapshots. | |
[ OK ] Finished GRUB failed boot detection. | |
[ OK ] Started User Login Management. | |
systemd-logind.service | |
[ OK ] Finished Permit User Sessions. | |
systemd-user-sessions.service | |
Starting Hold until boot process finishes up... | |
Starting Terminate Plymouth Boot Screen... | |
unattended-upgrades.service | |
[ OK ] Started Unattended Upgrades Shutdown. | |
[ 38.888840] cloud-init[1004]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:config' at Fri, 27 Jan 2023 01:37:55 +0000. Up 38.55 seconds. | |
Ubuntu 22.10 potato ttyAML0 | |
potato login: [ 41.794015] cloud-init[1025]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:final' at Fri, 27 Jan 2023 01:37:58 +0000. Up 41.46 seconds. | |
[ 42.207037] cloud-init[1025]: Cloud-init v. 22.3.4-0ubuntu1 finished at Fri, 27 Jan 2023 01:37:59 +0000. Datasource DataSourceNoCloud [seed=/dev/mmcblk1p1][dsmode=local]. Up 42.17 seconds | |
ubuntu | |
Password: | |
Login incorrect | |
potato login: ubuntu | |
Password: | |
Welcome to Ubuntu 22.10 (GNU/Linux 6.0.12-00858-gb98721ea4575 aarch64) | |
* Documentation: https://help.ubuntu.com | |
* Management: https://landscape.canonical.com | |
* Support: https://ubuntu.com/advantage | |
System information as of Fri Jan 27 01:38:33 UTC 2023 | |
System load: 0.63232421875 Temperature: 34.0 C | |
Usage of /home: unknown Processes: 159 | |
Memory usage: 10% Users logged in: 0 | |
Swap usage: 0% IPv4 address for eth0: 192.168.86.204 | |
47 updates can be applied immediately. | |
39 of these updates are standard security updates. | |
To see these additional updates run: apt list --upgradable | |
The list of available updates is more than a week old. | |
To check for new updates run: sudo apt update | |
Last login: Fri Jan 27 01:34:56 UTC 2023 on ttyAML0 | |
ubuntu@potato:~$ sudo shutdown -r now | |
ubuntu@potato:~$ [ OK ] Started Show Plymouth Reboot Screen. | |
plymouth-reboot.service | |
[ OK ] Stopped User Login Management. | |
[ OK ] Stopped User Manager for UID 1000. | |
Stopping User Runtime Directory /run/user/1000... | |
[ OK ] Unmounted /run/user/1000. | |
[ OK ] Stopped User Runtime Directory /run/user/1000. | |
[ OK ] Removed slice User Slice of UID 1000. | |
Stopping Permit User Sessions... | |
[ OK ] Stopped Permit User Sessions. | |
[ OK ] Stopped target Network. | |
[ OK ] Stopped target Remote File Systems. | |
[ OK ] Stopped target Preparation for Remote File Systems. | |
Stopping WPA supplicant... | |
[ OK ] Stopped WPA supplicant. | |
[ OK ] Stopped target Basic System. | |
[ OK ] Stopped Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Stopped target Path Units. | |
[ OK ] Stopped target Slice Units. | |
[ OK ] Removed slice User and Session Slice. | |
[ OK ] Stopped target Socket Units. | |
[ OK ] Closed cloud-init hotplug hook socket. | |
[ OK ] Closed Open-iSCSI iscsid Socket. | |
[ OK ] Closed Socket unix for snap application lxd.daemon. | |
[ OK ] Closed Socket unix for snap application lxd.user-daemon. | |
[ OK ] Closed Socket activation for snappy daemon. | |
[ OK ] Closed OpenBSD Secure Shell server socket. | |
[ OK ] Closed Syslog Socket. | |
[ OK ] Closed UUID daemon activation socket. | |
[ OK ] Stopped target System Initialization. | |
[ OK ] Unset automount Arbitrary s File System Automount Point. | |
[ OK ] Stopped target Local Encrypted Volumes. | |
[ OK ] Stopped Forward Password Ruests to Wall Directory Watch. | |
[ OK ] Stopped target Local Integrity Protected Volumes. | |
[ OK ] Stopped target Local Verity Protected Volumes. | |
[ OK ] Stopped Initial cloud-initob (metadata service crawler). | |
[ OK ] Stopped Wait for Network to be Configured. | |
Stopping Network Configuration... | |
Stopping Network Name Resolution... | |
Stopping Network Time Synchronization... | |
Stopping Record System Boot/Shutdown in UTMP... | |
[ OK ] Stopped Network Name Resolution. | |
[ OK ] Stopped Network Time Synchronization. | |
[ OK ] Stopped Network Configuration. | |
[ OK ] Stopped Record System Boot/Shutdown in UTMP. | |
[ OK ] Stopped target Preparation for Network. | |
[ OK ] Closed Network Service Netlink Socket. | |
[ OK ] Stopped Initial cloud-init job (pre-networking). | |
[ OK ] Stopped Apply Kernel Variables. | |
[ OK ] Stopped Load Kernel Modules. | |
[ OK ] Stopped Create Volatile Files and Directories. | |
[ OK ] Stopped Create final runtime dir for shutdown pivot root. | |
[ OK ] Stopped target Local File Systems. | |
Unmounting /boot/efi... | |
Unmounting /run/credentials/systemd-sysusers.service... | |
Unmounting /run/snapd/ns/lxd.mnt... | |
Unmounting Mount unit for core20, revision 1627... | |
Unmounting Mount unit for lxd, revision 23687... | |
Unmounting Mount unit for snapd, revision 17339... | |
[ OK ] Unmounted /boot/efi. | |
[ OK ] Unmounted /run/credentials/systemd-sysusers.service. | |
[ OK ] Unmounted /run/snapd/ns/lxd.mnt. | |
[ OK ] Unmounted Mount unit for core20, revision 1627. | |
[ OK ] Unmounted Mount unit for lxd, revision 23687. | |
[ OK ] Unmounted Mount unit for snapd, revision 17339. | |
Unmounting /run/snapd/ns... | |
[ OK ] Stopped File System Check dev/disk/by-label/system-boot. | |
[ OK ] Removed slice Slice /system/systemd-fsck. | |
[ OK ] Unmounted /run/snapd/ns. | |
[ OK ] Stopped target Preparation for Local File Systems. | |
[ OK ] Stopped target Swaps. | |
Deactivating swap /swapfile... | |
Stopping Monitoring of LVMmeventd or progress polling... | |
Stopping Device-Mapper Multipath Device Controller... | |
[ OK ] Stopped Create Static Device Nodes in /dev. | |
[ OK ] Stopped Create System Users. | |
[ OK ] Deactivated swap /swapfile. | |
[ OK ] Reached target Unmount All Filesystems. | |
[ OK ] Stopped Device-Mapper Multipath Device Controller. | |
[ OK ] Stopped Remount Root and Kernel File Systems. | |
[ OK ] Stopped Monitoring of LVM2 dmeventd or progress polling. | |
[ OK ] Reached target System Shutdown. | |
[ OK ] Reached target Late Shutdown Services. | |
[ OK ] Finished System Reboot. | |
[ OK ] Reached target System Reboot. | |
[ 90.801302] watchdog: watchdog0: watchdog did not stop! | |
[ 91.458432] watchdog: watchdog0: watchdog did not stop! | |
[ 91.828334] watchdog: watchdog0: watchdog did not stop! | |
[ 91.920349] reboot: Restarting system | |
bl31 reboot reason: 0xd | |
bl31 reboot reason: 0x0 | |
system cmd 1. | |
GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:10;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:11;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:12;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:13;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:14;USB:0;GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:0;READ:0;0.0;CHK:0; | |
no sdio debug board detected | |
TE: 1939078 | |
BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz | |
set vcck to 1120 mv | |
set vddee to 1000 mv | |
Board ID = 3 | |
CPU clk: 1200MHz | |
DQS-corr enabled | |
DDR scramble enabled | |
DDR3 chl: Rank0+1 @ 912MHz | |
bist_test rank: 0 1b 03 33 29 14 3e 17 00 2f 2e 19 43 18 00 30 2a 12 42 17 00 2f 2b 14 43 702 rank: 1 1a 05 30 29 13 3f 17 00 2f 2e 17 45 17 02 2c 29 13 3f 16 02 2b 2c 15 43 702 - PASS | |
Rank0: 1024MB(auto)-2T-13 | |
Rank1: 1024MB(auto)-2T-13 | |
AddrBus test pass! | |
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0 | |
New fip structure! | |
Load bl30 from SD, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0 | |
Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0 | |
Load bl33 from SD, src: 0x0004c200, des: 0x01000000, size: 0x00096a00, part: 0 | |
NOTICE: BL3-1: v1.0(release):53f813e | |
NOTICE: BL3-1: Built : 15:51:23, May 22 2019 | |
[BL31]: GXL CPU setup! | |
NOTICE: BL3-1: GXL normal boot! | |
NOTICE: BL3-1: BL33 decompress pass | |
mpu_config_enable:system pre init ok | |
dmc sec lock | |
[Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz] | |
OPS=0x85 | |
21 0e 85 00 59 17 cd 20 a3 4a 4a 10 e0 0f 05 28 | |
[2.544961 Inits done] | |
secure task start! | |
high task start! | |
low task start! | |
ERROR: Error initializing runtime service opteed_fast | |
<debug_uart> | |
U-Boot 2022.07+ (Nov 20 2022 - 18:31:28 -0500) Libre Computer Board AML-S905X-CC | |
Model: Libre Computer AML-S905X-CC | |
SoC: Amlogic Meson GXL (S905X) Revision 21:e (85:2) | |
DRAM: 2 GiB | |
Core: 177 devices, 29 uclasses, devicetree: separate | |
WDT: Not starting watchdog@98d0 | |
MMC: mmc@72000: 1, mmc@74000: 0 | |
Loading Environment from FAT... ** Bad device specification mmc 0 ** | |
** Bad device specification mmc 0 ** | |
Couldn't find partition mmc 0:1 | |
Error: could not access storage. | |
In: serial | |
Out: serial | |
Err: serial | |
[BL31]: tee size: 0 | |
Net: Fast Ethernet | |
[BL31]: tee size: 0 | |
Net: No ethernet found. | |
starting USB... | |
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2 | |
Register 2000140 NbrPorts 2 | |
Starting the controller | |
USB XHCI 1.00 | |
scanning bus usb@c9000000 for devices... 2 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Hit any key to stop autoboot: 1 0 | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
** Unable to read file ubootefi.var ** | |
Failed to load EFI variables | |
BootOrder not defined | |
EFI boot manager: Cannot load any image | |
Found EFI removable media binary efi/boot/bootaa64.efi | |
1890184 bytes read in 90 ms (20 MiB/s) | |
Booting /efi\boot\bootaa64.efi | |
EFI stub: Booting Linux Kernel... | |
EFI stub: Using DTB from configuration table | |
EFI stub: Exiting boot services... | |
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
[ 0.000000] Linux version 6.0.12-00858-gb98721ea4575 (autobuild@deb.libre.computer) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Thu Dec 8 19:08:19 UTC 2022 | |
[ 0.000000] Machine model: Libre Computer AML-S905X-CC | |
[ 0.000000] efi: EFI v2.90 by Das U-Boot | |
[ 0.000000] efi: ESRT=0x7ae51040 RTPROP=0x7ae53040 SMBIOS=0x7ae55000 RNG=0x57f8c040 MEMRESERVE=0x57f8b040 | |
[ 0.000000] efi: seeding entropy pool | |
[ 0.000000] random: crng init done | |
[ 0.000000] esrt: Reserving ESRT space from 0x000000007ae51040 to 0x000000007ae51078. | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] DMA32 empty | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] | |
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] | |
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] | |
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] | |
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007ae52fff] | |
[ 0.000000] node 0: [mem 0x000000007ae53000-0x000000007ae53fff] | |
[ 0.000000] node 0: [mem 0x000000007ae54000-0x000000007ae54fff] | |
[ 0.000000] node 0: [mem 0x000000007ae55000-0x000000007ae57fff] | |
[ 0.000000] node 0: [mem 0x000000007ae58000-0x000000007ae58fff] | |
[ 0.000000] node 0: [mem 0x000000007ae59000-0x000000007ae5cfff] | |
[ 0.000000] node 0: [mem 0x000000007ae5d000-0x000000007de7ffff] | |
[ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff] | |
[ 0.000000] node 0: [mem 0x000000007de90000-0x000000007fe5afff] | |
[ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv0.2 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: Trusted OS migration not required | |
[ 0.000000] percpu: Embedded 20 pages/cpu s43176 r8192 d30552 u81920 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
[ 0.000000] CPU features: detected: ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575 root=UUID=672a0911-0909-4a3e-bb4a-772b26b8b543 ro noquiet splash vt.handoff=7 | |
[ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 1684104K/2097152K available (14784K kernel code, 1952K rwdata, 6028K rodata, 3712K init, 505K bss, 150904K reserved, 262144K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] Dynamic Preempt: full | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU event tracing is enabled. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
[ 0.000000] Trampoline variant of Tasks RCU enabled. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.000644] Console: colour dummy device 80x25 | |
[ 0.001161] printk: console [tty0] enabled | |
[ 0.001201] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
[ 0.001226] pid_max: default: 32768 minimum: 301 | |
[ 0.001291] LSM: Security Framework initializing | |
[ 0.001317] Yama: becoming mindful. | |
[ 0.001437] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.001466] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.002774] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.002814] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.002886] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.003024] rcu: Hierarchical SRCU implementation. | |
[ 0.003039] rcu: Max phase no-delay instances is 1000. | |
[ 0.004260] Remapping and enabling EFI services. | |
[ 0.004618] smp: Bringing up secondary CPUs ... | |
[ 0.005137] Detected VIPT I-cache on CPU1 | |
[ 0.005269] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
[ 0.005865] Detected VIPT I-cache on CPU2 | |
[ 0.005985] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
[ 0.006552] Detected VIPT I-cache on CPU3 | |
[ 0.006671] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
[ 0.006759] smp: Brought up 1 node, 4 CPUs | |
[ 0.006829] SMP: Total of 4 processors activated. | |
[ 0.006841] CPU features: detected: 32-bit EL0 Support | |
[ 0.006852] CPU features: detected: 32-bit EL1 Support | |
[ 0.006866] CPU features: detected: CRC32 instructions | |
[ 0.007338] CPU: All CPU(s) started at EL2 | |
[ 0.007375] alternatives: patching kernel code | |
[ 0.008767] devtmpfs: initialized | |
[ 0.014224] Registered cp15_barrier emulation handler | |
[ 0.014263] Registered setend emulation handler | |
[ 0.014442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.014476] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.020614] pinctrl core: initialized pinctrl subsystem | |
[ 0.021171] SMBIOS 3.0 present. | |
[ 0.021203] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022 | |
[ 0.021647] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.022718] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.023014] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
[ 0.023174] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.023265] audit: initializing netlink subsys (disabled) | |
[ 0.023466] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
[ 0.024731] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.024747] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.024768] thermal_sys: Registered thermal governor 'power_allocator' | |
[ 0.025019] cpuidle: using governor menu | |
[ 0.025206] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.025319] ASID allocator initialised with 32768 entries | |
[ 0.037878] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039171] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039600] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx | |
[ 0.041720] KASLR enabled | |
[ 0.048559] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
[ 0.048593] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page | |
[ 0.048609] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
[ 0.048621] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page | |
[ 0.048636] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
[ 0.048648] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page | |
[ 0.048663] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
[ 0.048675] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
[ 0.116602] raid6: neonx8 gen() 2140 MB/s | |
[ 0.184688] raid6: neonx4 gen() 2196 MB/s | |
[ 0.252756] raid6: neonx2 gen() 2088 MB/s | |
[ 0.320830] raid6: neonx1 gen() 1815 MB/s | |
[ 0.388907] raid6: int64x8 gen() 1491 MB/s | |
[ 0.456976] raid6: int64x4 gen() 1663 MB/s | |
[ 0.525041] raid6: int64x2 gen() 1418 MB/s | |
[ 0.593128] raid6: int64x1 gen() 1053 MB/s | |
[ 0.593141] raid6: using algorithm neonx4 gen() 2196 MB/s | |
[ 0.661185] raid6: .... xor() 1585 MB/s, rmw enabled | |
[ 0.661198] raid6: using neon recovery algorithm | |
[ 0.661396] fbcon: Taking over console | |
[ 0.662778] iommu: Default domain type: Passthrough | |
[ 0.663134] SCSI subsystem initialized | |
[ 0.663524] usbcore: registered new interface driver usbfs | |
[ 0.663570] usbcore: registered new interface driver hub | |
[ 0.663610] usbcore: registered new device driver usb | |
[ 0.663885] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.663899] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.663925] PTP clock support registered | |
[ 0.664054] EDAC MC: Ver: 3.0.0 | |
[ 0.664580] Registered efivars operations | |
[ 0.664940] FPGA manager framework | |
[ 0.665052] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.665665] NetLabel: Initializing | |
[ 0.665682] NetLabel: domain hash size = 128 | |
[ 0.665693] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ 0.665754] NetLabel: unlabeled traffic allowed by default | |
[ 0.666181] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.666416] VFS: Disk quotas dquot_6.6.0 | |
[ 0.666464] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 0.671843] NET: Registered PF_INET protocol family | |
[ 0.672025] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.673680] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
[ 0.673775] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.673803] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
[ 0.673930] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
[ 0.674139] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 0.674386] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) | |
[ 0.674475] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.674528] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.674689] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.675123] RPC: Registered named UNIX socket transport module. | |
[ 0.675154] RPC: Registered udp transport module. | |
[ 0.675165] RPC: Registered tcp transport module. | |
[ 0.675176] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.675192] NET: Registered PF_XDP protocol family | |
[ 0.675214] PCI: CLS 0 bytes, default 64 | |
[ 0.675413] Trying to unpack rootfs image as initramfs... | |
[ 0.686954] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
[ 0.687517] kvm [1]: IPA Size Limit: 40 bits | |
[ 0.688783] kvm [1]: vgic interrupt IRQ9 | |
[ 0.688916] kvm [1]: Hyp mode initialized successfully | |
[ 0.690442] Initialise system trusted keyrings | |
[ 0.690695] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
[ 0.696524] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.697178] NFS: Registering the id_resolver key type | |
[ 0.697236] Key type id_resolver registered | |
[ 0.697252] Key type id_legacy registered | |
[ 0.697345] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.697363] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 0.697545] SGI XFS with ACLs, security attributes, no debug enabled | |
[ 0.698940] 9p: Installing v9fs 9p2000 file system support | |
[ 0.736421] xor: measuring software checksum speed | |
[ 0.740515] 8regs : 2442 MB/sec | |
[ 0.744479] 32regs : 2522 MB/sec | |
[ 0.748645] arm64_neon : 2405 MB/sec | |
[ 0.748681] xor: using function: 32regs (2522 MB/sec) | |
[ 0.748703] Key type asymmetric registered | |
[ 0.748716] Asymmetric key parser 'x509' registered | |
[ 0.946920] Freeing initrd memory: 27116K | |
[ 0.960558] alg: self-tests for CTR-KDF (hmac(sha256)) passed | |
[ 0.960670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
[ 0.960785] io scheduler mq-deadline registered | |
[ 0.960802] io scheduler kyber registered | |
[ 0.960854] io scheduler bfq registered | |
[ 0.961621] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized | |
[ 0.977541] soc soc0: Amlogic Meson GXL (S905X) Revision 21:e (85:2) Detected | |
[ 0.981811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.989833] loop: module loaded | |
[ 0.994147] tun: Universal TUN/TAP device driver, 1.6 | |
[ 0.995220] VFIO - User Level meta-driver version: 0.3 | |
[ 0.996354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 0.996386] ehci-pci: EHCI PCI platform driver | |
[ 0.996435] ehci-platform: EHCI generic platform driver | |
[ 0.996557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 0.996595] ohci-pci: OHCI PCI platform driver | |
[ 0.996637] ohci-platform: OHCI generic platform driver | |
[ 0.997011] usbcore: registered new interface driver usb-storage | |
[ 0.997707] i2c_dev: i2c /dev entries driver | |
[ 1.001500] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.001533] sdhci: Copyright(c) Pierre Ossman | |
[ 1.001921] Synopsys Designware Multimedia Card Interface Driver | |
[ 1.002508] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.003491] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 1.004452] meson-sm: secure-monitor enabled | |
[ 1.005033] hid: raw HID events driver (C) Jiri Kosina | |
[ 1.005170] usbcore: registered new interface driver usbhid | |
[ 1.005185] usbhid: USB HID core driver | |
[ 1.005564] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered | |
[ 1.009186] NET: Registered PF_PACKET protocol family | |
[ 1.009526] 9pnet: Installing 9P2000 support | |
[ 1.009616] Key type dns_resolver registered | |
[ 1.010022] registered taskstats version 1 | |
[ 1.010052] Loading compiled-in X.509 certificates | |
[ 1.012386] zswap: loaded using pool zstd/z3fold | |
[ 1.013544] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no | |
[ 1.033443] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart | |
[ 2.351778] printk: console [ttyAML0] enabled | |
[ 2.361429] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq | |
[ 2.362296] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware | |
domain-0 init dvfs: 4 | |
[ 2.385503] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 | |
[ 2.385543] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 | |
[ 2.399463] meson-gx-mmc d0074000.mmc: no support for card's volts | |
[ 2.400013] mmc0: error -22 whilst initialising SDIO card | |
[ 2.913360] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator | |
[ 2.915061] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator | |
[ 2.922163] dwc2 c9100000.usb: Controller does not support host mode. | |
[ 2.928352] dwc2: probe of c9100000.usb failed with error -22 | |
[ 2.937685] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 2.939504] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
[ 2.947240] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports | |
[ 2.952991] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 | |
[ 2.962350] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000 | |
[ 2.968420] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 | |
[ 2.976371] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.983532] usb usb1: Product: xHCI Host Controller | |
[ 2.988343] usb usb1: Manufacturer: Linux 6.0.12-00858-gb98721ea4575 xhci-hcd | |
[ 2.995417] usb usb1: SerialNumber: xhci-hcd.0.auto | |
[ 3.000679] hub 1-0:1.0: USB hub found | |
[ 3.003995] hub 1-0:1.0: 2 ports detected | |
[ 3.010544] meson-gx-mmc d0072000.mmc: Got CD GPIO | |
[ 3.011072] of_cfs_init | |
[ 3.015207] of_cfs_init: OK | |
[ 3.018110] ALSA device list: | |
[ 3.020811] No soundcards found. | |
[ 3.042739] Freeing unused kernel memory: 3712K | |
[ 3.042945] Run /init as init process | |
Loading, please wait... | |
Starting version 251.4-1ubuntu7 | |
[ 3.158038] mmc1: new ultra high speed SDR50 SDXC card at address aaaa | |
[ 3.159967] mmcblk1: mmc1:aaaa SN64G 59.5 GiB | |
[ 3.168010] mmcblk1: p1 p2 | |
[ 3.262228] usb 1-1: new high-speed USB device number 2 using xhci-hcd | |
[ 3.324920] BTRFS: device label writable devid 1 transid 448 /dev/mmcblk1p2 scanned by systemd-udevd (176) | |
[ 3.415804] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 | |
[ 3.418463] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 3.425817] usb 1-1: Product: USB2.0 Hub | |
[ 3.462673] mmc0: Card stuck being busy! __mmc_poll_for_busy | |
[ 3.504884] hub 1-1:1.0: USB hub found | |
[ 3.505282] hub 1-1:1.0: 4 ports detected | |
[ 3.578650] [drm] Initialized simpledrm 1.0.0 20200625 for 7fe5b000.framebuffer on minor 0 | |
[ 3.607441] Console: switching to colour frame buffer device 90x36 | |
[ 3.616693] simple-framebuffer 7fe5b000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device | |
[ 3.652630] simple-framebuffer simple-framebuffer.0: [drm] *ERROR* could not acquire memory range [mem 0x7fe5b000-0x7ffeffff flags 0x200]: error -16 | |
[ 3.660778] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16 | |
[ 3.673618] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found | |
[ 3.676938] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found | |
[ 3.681523] meson8b-dwmac c9410000.ethernet: PTP uses main clock | |
[ 3.689624] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 | |
[ 3.694332] meson8b-dwmac c9410000.ethernet: DWMAC1000 | |
[ 3.699395] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported | |
[ 3.699663] meson-drm d0100000.vpu: Queued 2 outputs on vpu | |
[ 3.706466] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported | |
[ 3.707191] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 | |
[ 3.707268] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 | |
[ 3.707332] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 | |
[ 3.707398] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 | |
[ 3.707435] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.707446] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.719427] lima d00c0000.gpu: bus rate = 166666667 | |
[ 3.728318] meson8b-dwmac c9410000.ethernet: COE Type 2 | |
[ 3.756147] lima d00c0000.gpu: mod rate = 24000000 | |
[ 3.761145] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported | |
[ 3.771153] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported | |
[ 3.782533] meson8b-dwmac c9410000.ethernet: Normal descriptors | |
[ 3.786992] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found | |
[ 3.788951] meson8b-dwmac c9410000.ethernet: Ring mode enabled | |
[ 3.793318] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 | |
[ 3.794689] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
[ 3.846309] Console: switching to colour dummy device 80x25 | |
[ 3.885594] Trying to free nonexistent resource <000000007fe5b000-000000007ffeffff> | |
[ 3.914317] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) | |
[ 3.919273] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver | |
[ 3.926891] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) | |
[ 3.936677] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 2 | |
[ 3.953095] Console: switching to colour frame buffer device 90x36 | |
[ 3.977473] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device | |
Begin: Loading essential drivers ... [ 5.345003] async_tx: api initialized (async) | |
done. | |
Begin: Running /scripts/init-premount ... done. | |
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems | |
done. | |
Begin: Will now check root file system ... fsck from util-linux 2.38 | |
[/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 | |
done. | |
[ 5.660878] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm | |
[ 5.663765] BTRFS info (device mmcblk1p2): disk space caching is enabled | |
[ 5.682756] BTRFS info (device mmcblk1p2): enabling ssd optimizations | |
done. | |
Begin: Running /scripts/local-bottom ... done. | |
Begin: Running /scripts/init-bottom ... done. | |
[ 6.308500] systemd[1]: System time before build time, advancing clock. | |
[ 6.384660] NET: Registered PF_INET6 protocol family | |
[ 6.408410] Segment Routing with IPv6 | |
[ 6.408504] RPL Segment Routing with IPv6 | |
[ 6.410529] In-situ OAM (IOAM) with IPv6 | |
[ 6.481832] systemd[1]: systemd 251.4-1ubuntu7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
[ 6.509391] systemd[1]: Detected architecture arm64. | |
Welcome to Ubuntu 22.10! | |
[ 6.517929] systemd[1]: Hostname set to <potato>. | |
-.mount | |
[ 7.311724] systemd[1]: Queued start job for default target Graphical Interface. | |
[ 7.398240] systemd[1]: Created slice Slice /system/modprobe. | |
[ 7.401032] systemd[1]: Created slice Slice /system/serial-getty. | |
2m [ 7.407508] systemd[1]: Created slice Slice /system/systemd-fsck. | |
OK ] Created slice systemd[1]: Created slice User and Session Slice. | |
[0;1;39mSlice /system/modprobe. | |
[ OK ] Create[ 7.422490] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
d slice Slice /system/serial-getty. | |
[ OK [ 7.436890] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
] Created slice Slice /system/systemd-fsck. | |
[ OK ] Created slice User and Session Slice 7.456164] systemd[1]: Reached target Local Integrity Protected Volumes. | |
0m. | |
[ OK ] Started Forward Password R[ 7.467988] systemd[1]: Reached target Slice Units. | |
uests to Wall Directory Watch. | |
[ OK ] Set u[ 7.478311] systemd[1]: Reached target Local Verity Protected Volumes. | |
p automount Arbitrarys File System Automount Point 7.490744] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
m. | |
[ OK ] Reached[ 7.503987] systemd[1]: Listening on LVM2 poll daemon socket. | |
target Local Integr[ 7.512055] systemd[1]: Listening on multipathd control socket. | |
ity Protected Volumes[ 7.520094] systemd[1]: Listening on Syslog Socket. | |
. | |
[ OK ] Reach[ 7.526379] systemd[1]: Listening on fsck to fsckd communication Socket. | |
ed target Slice Unit[ 7.535093] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
s. | |
[ OK systemd[1]: Listening on Journal Audit Socket. | |
[0m] Reached target 7.551500] systemd[1]: Listening on Journal Socket (/dev/log). | |
;39mLocal Verity Protecte[ 7.559645] systemd[1]: Listening on Journal Socket. | |
d Volumes. | |
[[ 7.566885] systemd[1]: Listening on Network Service Netlink Socket. | |
OK ] Listening on [ 7.576314] systemd[1]: Listening on udev Control Socket. | |
Device-mapper ev[ 7.582531] systemd[1]: Listening on udev Kernel Socket. | |
ent daemon FIFOs. | |
[ OK ] Listening on LVM2 poll daemon socket. | |
[ OK ] Listening on multipathd control socket. | |
[ OK ] Listening on Syslog Socket. | |
[ OK ] Listening on fsck to fsckd communication Socket. | |
[ OK ] Listening on initctl Compatibility Named Pipe. | |
[[ 7.622626] systemd[1]: Mounting Huge Pages File System... | |
OK ] Listening on Journal Audit Socket. | |
[[ 7.635499] systemd[1]: Mounting POSIX Message Queue File System... | |
OK ] Listening on Journal Socket (/dev/log[ 7.647087] systemd[1]: Mounting Kernel Debug File System... | |
). | |
[ OK ] L[ 7.653734] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
istening on Journal Socket. | |
[ OK ] L[ 7.672655] systemd[1]: Starting Journal Service... | |
istening on Network Service Netlink Socket. | |
[ OK ] Listening on 7.685998] systemd[1]: Starting Set the console keyboard layout... | |
;1;39mudev Control Socket. | |
[ OK ] Listen[ 7.698041] systemd[1]: Starting Create List of Static Device Nodes... | |
ing on udev Kernel Socket. | |
Mounting Huge Pages File System 7.710432] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
0m... | |
Mounting POSIX Message Q[ 7.724711] systemd[1]: LXD - agent was skipped because of a failed condition check (ConditionPathExists=/dev/virtio-ports/org.linuxcontainers.lxd). | |
[ 7.736003] systemd[1]: Starting Load Kernel Module chromeos_pstore... | |
ueue File System... | |
Mounting Kernel Debug File System... | |
Starting Journal Service 7.757755] systemd[1]: Starting Load Kernel Module configfs... | |
m... | |
Starting Set the console keyboard la[ 7.769266] systemd[1]: Starting Load Kernel Module drm... | |
yout... | |
Starting Create List of Static Device Nodes... | |
St[ 7.780608] systemd[1]: Starting Load Kernel Module efi_pstore... | |
arting Monitoring of LVMmeventd or progress polling... | |
Starting Load Kernel Module chromeos_pstore... | |
[ 7.796987] systemd[1]: Starting Load Kernel Module fuse... | |
Starting Load Kernel Module configfs... | |
[ 7.812467] systemd[1]: Starting Load Kernel Module pstore_blk... | |
Starting Load Kernel Module drm... | |
Starting 7.824218] systemd[1]: Starting Load Kernel Module pstore_zone... | |
[ 7.830022] fuse: init (API version 7.36) | |
39mLoad Kernel Module efi_pstore... | |
Starting Load Kernel Module fus[ 7.842111] systemd[1]: Starting Load Kernel Module ramoops... | |
e... | |
Starting Load Kernel Module pstore_blk... | |
Starti[ 7.856077] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of a failed condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). | |
ng Load Kernel Module p[ 7.874087] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
store_zone... | |
Starting Load Kernel Module ramoops... | |
[ 7.896008] systemd[1]: Starting Load Kernel Modules... | |
Starting Load Kernel Modules... | |
[ 7.907200] systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting [ 7.911561] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. | |
[ 7.918019] systemd[1]: Starting Coldplug All udev Devices... | |
Remount Root and Kernel File Systems... | |
Starting Coldplug All udev Devices... | |
[ 7.942882] systemd[1]: Mounted Huge Pages File System. | |
[ OK ] Mounted Huge Pages File System. | |
de[ 7.951153] systemd[1]: Started Journal Service. | |
v-hugepages.mount | |
[ OK ] Started Jou[ 7.960279] Asymmetric key parser 'pkcs8' registered | |
[ 7.964771] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3 | |
rnal Service. | |
systemd-journald.service | |
[ OK ] Mounted POSIX Message Queue File System. | |
[ OK ] Mounted Kernel Debug File System. | |
[ OK ] Finished Create List of Static Device Nodes. | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
dev-mqueue.mount | |
[ OK ] Finished Load Kernel Module configfs. | |
[ OK ] Finished Load Kernel Module drm. | |
sys-kernel-debug.mount | |
kmod-static-nodes.service | |
lvm2-monitor.service | |
[ OK ] Finished Monitoring of LVM dmeventd or progress polling. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module fuse. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Set the console keyboard layout. | |
keyboard-setup.service | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ OK ] Finished Load Kernel Modules. | |
systemd-modules-load.service | |
[ OK ] Finished Remount Root and Kernel File Systems. | |
systemd-remount-fs.service | |
Mounting FUSE Control File System... | |
Mounting Kernel Configuration File System... | |
Starting Device-Mapper Multipath Device Controller... | |
Starting Flush Journal to Persistent Storage...[ 8.113534] alua: device handler registered | |
Starting Load/Save Random Seed... | |
Starting 8.122823] emc: device handler registered | |
9mApply Kernel Variables... | |
Starting Create System Users... | |
[ 8.138724] systemd-journald[394]: Received client request to flush runtime journal. | |
[ 8.142108] rdac: device handler registered | |
run-credentials-systemd\x2dsysusers.service.mount | |
[ OK ] Mounted FUSE Control File System. | |
sys-fs-fuse-connections.mount | |
[ OK ] Mounted Kernel Configuration File System. | |
sys-kernel-config.mount | |
[ 8.235333] systemd-journald[394]: File /var/log/journal/3dc7088238283ab098a6590663982acf/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
[ OK ] Finished Apply Kernel Variables. | |
systemd-sysctl.service | |
[ OK ] Finished Coldplug All udev Devices. | |
systemd-udev-trigger.service | |
[ OK ] Finished Load/Save Random Seed. | |
systemd-random-seed.service | |
[ OK ] Finished Create System Users. | |
systemd-sysusers.service | |
Starting Create Static Device Nodes in /dev... | |
[ OK ] Finished Flush Journal to Persistent Storage. | |
systemd-journal-flush.service | |
systemd-tmpfiles-setup-dev.service | |
[ OK ] Finished Create Static Device Nodes in /dev. | |
Starting Rule-based Managefor Device Events and Files... | |
[ OK ] Started Device-Mapper Multipath Device Controller. | |
[ OK ] Reached target Preparation for Local File Systems. | |
multipathd.service | |
Mounting Mount unit for core20, revision 1627... | |
Mounting Mount unit for lxd, revision 23687... | |
Mounting Mount unit for snapd, revision 17339... | |
[ OK ] Mounted Mount unit for core20, revision 1627. | |
snap-core20-1627.mount | |
[ OK ] Mounted Mount unit for lxd, revision 23687. | |
[ OK ] Mounted Mount unit for snapd, revision 17339. | |
snap-lxd-23687.mount | |
snap-snapd-17339.mount | |
[ OK ] Started Rule-based Manager for Device Events and Files. | |
systemd-udevd.service | |
Starting Show Plymouth Boot Screen... | |
plymouth-start.service | |
[ OK ] Started Show Plymouth Boot Screen. | |
[ OK ] Started Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Reached target Local Encrypted Volumes. | |
[ OK ] Found device /dev/ttyAML0. | |
[ OK ] Found device /dev/disk/by-label/system-boot. | |
Starting File System Checkv/disk/by-label/system-boot... | |
[ OK ] Started File System Check Daemon to report status. | |
systemd-fsckd.service | |
[ OK ] Finished File System Checkdev/disk/by-label/system-boot. | |
systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service | |
Mounting /boot/efi... | |
[ OK ] Mounted /boot/efi. | |
boot-efi.mount | |
[ OK ] Reached target Local File Systems. | |
Starting Set console font and keymap... | |
Starting Create final runtdir for shutdown pivot root... | |
Starting Tell Plymouth To Write Out Runtime Data... | |
Starting Create Volatile Files and Directories... | |
Starting Uncomplicated firewall... | |
[ OK ] Finished Set console font and keymap. | |
console-setup.service | |
[ OK ] Finished Create final runte dir for shutdown pivot root. | |
finalrd.service | |
plymouth-read-write.service | |
[ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
[ OK ] Finished Uncomplicated firewall. | |
ufw.service | |
[BL31]: tee size: 0 | |
[ OK ] Finished Create Volatile Files and Directories. | |
systemd-tmpfiles-setup.service | |
Starting Network Name Resolution... | |
Starting Network Time Synchronization... | |
Starting Record System Boot/Shutdown in UTMP... | |
Starting Initial cloud-init job (pre-networking)... | |
[ OK ] Finished Record System Boot/Shutdown in UTMP. | |
systemd-update-utmp.service | |
systemd-timesyncd.service | |
[ OK ] Started Network Time Synchronization. | |
[ OK ] Reached target System Time Set. | |
[ OK ] Started Network Name Resolution. | |
[ OK ] Reached target Host and Network Name Lookups. | |
systemd-resolved.service | |
Starting Load Kernel Module chromeos_pstore... | |
Starting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module pstore_blk... | |
Starting Load Kernel Module pstore_zone... | |
Starting Load Kernel Module ramoops... | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ 13.541226] cloud-init[584]: Cloud-init v. 22.3.4-0ubuntu1 running 'init-local' at Fri, 27 Jan 2023 01:38:48 +0000. Up 13.37 seconds. | |
[ OK ] Finished Initial cloud-init job (pre-networking). | |
cloud-init-local.service | |
[ OK ] Reached target Preparation for Network. | |
Starting Network Configuration... | |
[ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. | |
systemd-networkd.service | |
[ OK ] Started Network Configuration. | |
Starting Wait for Network to be Configured... | |
[ OK ] Finished Wait for Network to be Configured. | |
systemd-networkd-wait-online.service | |
Starting Initial cloud-ini (metadata service crawler)... | |
[ 33.761381] cloud-init[632]: Cloud-init v. 22.3.4-0ubuntu1 running 'init' at Fri, 27 Jan 2023 01:40:22 +0000. Up 33.59 seconds. | |
[ 33.834006] cloud-init[632]: ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++ | |
[ 33.834548] cloud-init[632]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.836608] cloud-init[632]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address | | |
[ 33.838339] cloud-init[632]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.840529] cloud-init[632]: ci-info: | eth0 | True | 192.168.86.204 | 255.255.255.0 | global | d6:42:f4:77:0d:f6 | | |
[ 33.842313] cloud-init[632]: ci-info: | eth0 | True | fe80::d442:f4ff:fe77:df6/64 | . | link | d6:42:f4:77:0d:f6 | | |
[ 33.844495] cloud-init[632]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . | | |
[ 33.846292] cloud-init[632]: ci-info: | lo | True | ::1/128 | . | host | . | | |
[ 33.848553] cloud-init[632]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.850497] cloud-init[632]: ci-info: ++++++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++++ | |
[ 33.852679] cloud-init[632]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.854682] cloud-init[632]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags | | |
[ 33.857023] cloud-init[632]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.859004] cloud-init[632]: ci-info: | 0 | 0.0.0.0 | 192.168.86.1 | 0.0.0.0 | eth0 | UG | | |
[ 33.860985] cloud-init[632]: ci-info: | 1 | 192.168.86.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U | | |
[ 33.862855] cloud-init[632]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.865297] cloud-init[632]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++ | |
[ 33.867170] cloud-init[632]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 33.869339] cloud-init[632]: ci-info: | Route | Destination | Gateway | Interface | Flags | | |
[ 33.871387] cloud-init[632]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 33.873683] cloud-init[632]: ci-info: | 1 | fe80::/64 | :: | eth0 | U | | |
[ 33.875818] cloud-init[632]: ci-info: | 3 | local | :: | eth0 | U | | |
[ 33.878146] cloud-init[632]: ci-info: | 4 | multicast | :: | eth0 | U | | |
[ 33.880359] cloud-init[632]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ OK ] Finished Initial cloud-iniob (metadata service crawler). | |
[ OK ] Reached target Cloud-config availability. | |
cloud-init.service | |
Activating swap /swapfile... | |
[ OK ] Activated swap /swapfile. | |
[ OK ] Reached target Swaps. | |
[ OK ] Reached target System Initialization. | |
swapfile.swap | |
[ OK ] Started Daily apt download activities. | |
[ OK ] Started Daily apt upgrade and clean activities. | |
[ OK ] Started Daily dpkg database backup timer. | |
[ OK ] Started Periodic ext4 Onliata Check for All Filesystems. | |
[ OK ] Started Discard unused blocks once a week. | |
[ OK ] Started Daily rotation of log files. | |
[ OK ] Started Daily man-db regeneration. | |
[ OK ] Started Message of the Day. | |
[ OK ] Started Daily Cleanup of Temporary Directories. | |
[ OK ] Started Ubuntu Advantage Timer for running repeated jobs. | |
[ OK ] Reached target Path Units. | |
[ OK ] Listening on cloud-init hotplug hook socket. | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Listening on Open-iSCSI iscsid Socket. | |
[ OK ] Listening on Socket unix for snap application lxd.daemon. | |
[ OK ] Listening on Socket unix fp application lxd.user-daemon. | |
Starting Socket activation for snappy daemon... | |
[ OK ] Listening on OpenBSD Secure Shell server socket. | |
[ OK ] Listening on UUID daemon activation socket. | |
[ OK ] Listening on Socket activation for snappy daemon. | |
[ OK ] Reached target Socket Units. | |
[ OK ] Reached target Basic System. | |
Starting Save/Restore Sound Card State... | |
Starting D-Bus System Message Bus... | |
[ OK ] Started Save initial kernel messages after boot. | |
dmesg.service | |
Starting DUN service... | |
Starting Remove Stale Onlit4 Metadata Check Snapshots... | |
Starting Record successful boot for GRUB... | |
[ OK ] Started irqbalance daemon. | |
irqbalance.service | |
Starting Telephony service... | |
Starting System Logging Service... | |
[ OK ] Reached target Preparation for Logins. | |
Starting Snap Daemon... | |
Starting User Login Management... | |
[ OK ] Started D-Bus System Message Bus. | |
dbus.service | |
Starting WPA supplicant... | |
[ OK ] Started Telephony service. | |
ofono.service | |
[ OK ] Started DUN service. | |
dundee.service | |
alsa-restore.service | |
[ OK ] Finished Save/Restore Sound Card State. | |
[ OK ] Reached target Sound Card. | |
rsyslog.service | |
[ OK ] Started System Logging Service. | |
[ OK ] Finished Record successful boot for GRUB. | |
Starting GRUB failed boot detection... | |
Mounting Arbitrary Executable File Formats File System... | |
[ OK ] Finished Remove Stale Onliext4 Metadata Check Snapshots. | |
[ OK ] Mounted Arbitrary Executable File Formats File System. | |
proc-sys-fs-binfmt_misc.mount | |
[ OK ] Started User Login Management. | |
systemd-logind.service | |
[ OK ] Started WPA supplicant. | |
[ OK ] Reached target Network. | |
wpa_supplicant.service | |
[ OK ] Reached target Network is Online. | |
[ OK ] Started Download data for ailed at package install time. | |
[ OK ] Started Check to see whethw version of Ubuntu available. | |
[ OK ] Reached target Timer Units. | |
[ OK ] Reached target Preparation for Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
Starting LSB: automatic crash report generation... | |
[ OK ] Finished Availability of block devices. | |
blk-availability.service | |
[ OK ] Started Regular background program processing daemon. | |
cron.service | |
Starting LSB: rng-tools (Debian variant)... | |
Starting Service for snap application lxd.activate... | |
Starting Permit User Sessions... | |
[ OK ] Started Unattended Upgrades Shutdown. | |
unattended-upgrades.service | |
[ OK ] Finished GRUB failed boot detection. | |
[ OK ] Finished Permit User Sessions. | |
systemd-user-sessions.service | |
Starting Hold until boot process finishes up... | |
Starting Terminate Plymouth Boot Screen... | |
[ 38.243685] cloud-init[798]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:config' at Fri, 27 Jan 2023 01:40:26 +0000. Up 37.91 seconds. | |
Ubuntu 22.10 potato ttyAML0 | |
potato login: [ 41.140441] cloud-init[822]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:final' at Fri, 27 Jan 2023 01:40:29 +0000. Up 40.81 seconds. | |
[ 41.689439] cloud-init[822]: Cloud-init v. 22.3.4-0ubuntu1 finished at Fri, 27 Jan 2023 01:40:30 +0000. Datasource DataSourceNoCloud [seed=/dev/mmcblk1p1][dsmode=local]. Up 41.66 seconds | |
ubuntu | |
Password: | |
Welcome to Ubuntu 22.10 (GNU/Linux 6.0.12-00858-gb98721ea4575 aarch64) | |
* Documentation: https://help.ubuntu.com | |
* Management: https://landscape.canonical.com | |
* Support: https://ubuntu.com/advantage | |
System information as of Fri Jan 27 01:40:40 UTC 2023 | |
System load: 1.900390625 Temperature: 34.0 C | |
Usage of /home: unknown Processes: 161 | |
Memory usage: 9% Users logged in: 0 | |
Swap usage: 0% IPv4 address for eth0: 192.168.86.204 | |
47 updates can be applied immediately. | |
39 of these updates are standard security updates. | |
To see these additional updates run: apt list --upgradable | |
The list of available updates is more than a week old. | |
To check for new updates run: sudo apt update | |
Last login: Fri Jan 27 01:38:36 UTC 2023 on ttyAML0 | |
ubuntu@potato:~$ sudo apt update | |
0% [Working] | |
0% [Waiting for headers] [Connected to deb.libre.computer (192.53.162.101)] | |
Hit:1 http://ports.ubuntu.com/ubuntu-ports kinetic InRelease | |
0% [Connected to deb.libre.computer (192.53.162.101)] | |
Get:2 http://ports.ubuntu.com/ubuntu-ports kinetic-updates InRelease [109 kB] | |
0% [2 InRelease 14.3 kB/109 kB 13%] [Connected to deb.libre.computer (192.53.16 | |
0% [Waiting for headers] | |
Get:3 https://deb.libre.computer/repo linux InRelease [5165 B] | |
0% [Waiting for headers] [3 InRelease 5165 B/5165 B 100%] | |
0% [Waiting for headers] | |
Get:4 http://ports.ubuntu.com/ubuntu-ports kinetic-backports InRelease [99.9 kB] | |
0% [4 InRelease 2688 B/99.9 kB 3%] | |
0% [4 InRelease 99.9 kB/99.9 kB 100%] | |
0% [Waiting for headers] | |
Get:5 http://ports.ubuntu.com/ubuntu-ports kinetic-security InRelease [109 kB] | |
0% [5 InRelease 2687 B/109 kB 2%] | |
0% [Working] | |
0% [Working] | |
Get:6 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 Packages [251 kB] | |
0% [6 Packages 2687 B/251 kB 1%] | |
0% [Working] | |
0% [6 Packages store 0 B] [Waiting for headers] | |
0% [6 Packages store 0 B] [Waiting for headers] | |
Get:7 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main Translation-en [69.8 kB] | |
0% [6 Packages store 0 B] [7 Translation-en 2688 B/69.8 kB 4%] [Waiting for hea | |
0% [7 Translation-en 20.1 kB/69.8 kB 29%] [Waiting for headers] | |
0% [Waiting for headers] | |
Get:8 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 c-n-f Metadata [5496 B] | |
0% [8 Commands-arm64 5496 B/5496 B 100%] [Waiting for headers] | |
0% [7 Translation-en store 0 B] [8 Commands-arm64 5496 B/5496 B 100%] [Waiting | |
0% [7 Translation-en store 0 B] [Waiting for headers] | |
Get:9 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/restricted arm64 Packages [117 kB] | |
0% [7 Translation-en store 0 B] [9 Packages 10.8 kB/117 kB 9%] [Waiting for hea | |
0% [7 Translation-en store 0 B] [Waiting for headers] | |
Get:10 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/restricted Translation-en [28.0 kB] | |
0% [7 Translation-en store 0 B] [10 Translation-en 18.2 kB/28.0 kB 65%] [Waitin | |
0% [7 Translation-en store 0 B] [Waiting for headers] | |
Get:11 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/restricted arm64 c-n-f Metadata [408 B] | |
0% [7 Translation-en store 0 B] [Waiting for headers] [Waiting for headers] | |
Get:12 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/universe arm64 Packages [107 kB] | |
0% [7 Translation-en store 0 B] [12 Packages 17.0 kB/107 kB 16%] [Waiting for h | |
0% [7 Translation-en store 0 B] [Waiting for headers] | |
Get:13 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/universe Translation-en [43.4 kB] | |
0% [7 Translation-en store 0 B] [13 Translation-en 702 B/43.4 kB 2%] [Waiting f | |
0% [13 Translation-en 18.1 kB/43.4 kB 42%] [Waiting for headers] | |
0% [8 Commands-arm64 store 0 B] [13 Translation-en 18.1 kB/43.4 kB 42%] [Waitin | |
0% [13 Translation-en 18.1 kB/43.4 kB 42%] [Waiting for headers] | |
0% [9 Packages store 0 B] [13 Translation-en 18.1 kB/43.4 kB 42%] [Waiting for | |
Get:14 https://deb.libre.computer/repo linux/main arm64 Packages [9822 B] | |
0% [9 Packages store 0 B] [13 Translation-en 18.1 kB/43.4 kB 42%] [14 Packages | |
0% [9 Packages store 0 B] [13 Translation-en 18.1 kB/43.4 kB 42%] | |
0% [9 Packages store 0 B] | |
Get:15 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/universe arm64 c-n-f Metadata [3552 B] | |
0% [9 Packages store 0 B] [15 Commands-arm64 3552 B/3552 B 100%] | |
0% [9 Packages store 0 B] | |
Get:16 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/multiverse arm64 Packages [2396 B] | |
0% [9 Packages store 0 B] [16 Packages 0 B/2396 B 0%] | |
0% [9 Packages store 0 B] | |
Get:17 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/multiverse Translation-en [1128 B] | |
0% [9 Packages store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [10 Translation-en store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [11 Commands-arm64 store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [12 Packages store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [14 Packages store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [13 Translation-en store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [15 Commands-arm64 store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [16 Packages store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
0% [17 Translation-en store 0 B] [Waiting for headers] | |
0% [Waiting for headers] | |
Get:18 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/multiverse arm64 c-n-f Metadata [216 B] | |
0% [18 Commands-arm64 216 B/216 B 100%] | |
0% [Working] | |
0% [18 Commands-arm64 store 0 B] | |
0% [Working] | |
0% [Working] | |
Get:19 http://ports.ubuntu.com/ubuntu-ports kinetic-backports/universe arm64 Packages [3916 B] | |
0% [19 Packages 3916 B/3916 B 100%] | |
0% [Working] | |
0% [19 Packages store 0 B] | |
0% [Waiting for headers] | |
Get:20 http://ports.ubuntu.com/ubuntu-ports kinetic-backports/universe Translation-en [1340 B] | |
0% [20 Translation-en 1340 B/1340 B 100%] | |
0% [Working] | |
Get:21 http://ports.ubuntu.com/ubuntu-ports kinetic-backports/universe arm64 c-n-f Metadata [172 B] | |
0% [Working] | |
0% [Working] | |
0% [21 Commands-arm64 store 0 B] | |
0% [Working] | |
72% [Working] | |
Get:22 http://ports.ubuntu.com/ubuntu-ports kinetic-security/main arm64 Packages [179 kB] | |
72% [22 Packages 4135 B/179 kB 2%] | |
82% [Working] | |
82% [22 Packages store 0 B] | |
82% [Waiting for headers] | |
Get:23 http://ports.ubuntu.com/ubuntu-ports kinetic-security/main Translation-en [49.0 kB] | |
82% [23 Translation-en 4137 B/49.0 kB 8%] | |
85% [Working] | |
Get:24 http://ports.ubuntu.com/ubuntu-ports kinetic-security/main arm64 c-n-f Metadata [4212 B] | |
85% [24 Commands-arm64 4212 B/4212 B 100%] | |
85% [23 Translation-en store 0 B] [24 Commands-arm64 4212 B/4212 B 100%] | |
85% [23 Translation-en store 0 B] | |
Get:25 http://ports.ubuntu.com/ubuntu-ports kinetic-security/restricted arm64 Packages [117 kB] | |
86% [23 Translation-en store 0 B] [25 Packages 24.3 kB/117 kB 21%] | |
91% [23 Translation-en store 0 B] | |
Get:26 http://ports.ubuntu.com/ubuntu-ports kinetic-security/restricted Translation-en [28.0 kB] | |
92% [23 Translation-en store 0 B] [26 Translation-en 5559 B/28.0 kB 20%] | |
93% [23 Translation-en store 0 B] | |
Get:27 http://ports.ubuntu.com/ubuntu-ports kinetic-security/restricted arm64 c-n-f Metadata [412 B] | |
93% [23 Translation-en store 0 B] [27 Commands-arm64 412 B/412 B 100%] | |
93% [23 Translation-en store 0 B] | |
Get:28 http://ports.ubuntu.com/ubuntu-ports kinetic-security/universe arm64 Packages [66.2 kB] | |
95% [23 Translation-en store 0 B] [28 Packages 33.3 kB/66.2 kB 50%] | |
97% [23 Translation-en store 0 B] | |
Get:29 http://ports.ubuntu.com/ubuntu-ports kinetic-security/universe Translation-en [28.4 kB] | |
97% [23 Translation-en store 0 B] [29 Translation-en 16.1 kB/28.4 kB 57%] | |
98% [23 Translation-en store 0 B] | |
Get:30 http://ports.ubuntu.com/ubuntu-ports kinetic-security/universe arm64 c-n-f Metadata [2988 B] | |
98% [23 Translation-en store 0 B] [30 Commands-arm64 2988 B/2988 B 100%] | |
98% [23 Translation-en store 0 B] | |
99% [Working] | |
99% [24 Commands-arm64 store 0 B] | |
99% [Working] | |
99% [25 Packages store 0 B] | |
99% [Working] | |
99% [26 Translation-en store 0 B] | |
99% [Working] | |
99% [27 Commands-arm64 store 0 B] | |
99% [Working] | |
99% [28 Packages store 0 B] | |
100% [Working] | |
100% [29 Translation-en store 0 B] | |
100% [Working] | |
100% [30 Commands-arm64 store 0 B] | |
100% [Working] | |
Fetched 1442 kB in 3s (466 kB/s) | |
Reading package lists... 0% | |
Reading package lists... 0% | |
Reading package lists... 0% | |
Reading package lists... 5% | |
Reading package lists... 5% | |
Reading package lists... 8% | |
Reading package lists... 8% | |
Reading package lists... 8% | |
Reading package lists... 8% | |
Reading package lists... 8% | |
Reading package lists... 8% | |
Reading package lists... 21% | |
Reading package lists... 41% | |
Reading package lists... 59% | |
Reading package lists... 65% | |
Reading package lists... 65% | |
Reading package lists... 91% | |
Reading package lists... 91% | |
Reading package lists... 92% | |
Reading package lists... 92% | |
Reading package lists... 92% | |
Reading package lists... 92% | |
Reading package lists... 93% | |
Reading package lists... 93% | |
Reading package lists... 94% | |
Reading package lists... 94% | |
Reading package lists... 94% | |
Reading package lists... 95% | |
Reading package lists... 95% | |
Reading package lists... 95% | |
Reading package lists... 95% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 96% | |
Reading package lists... 97% | |
Reading package lists... 97% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 98% | |
Reading package lists... 99% | |
Reading package lists... 99% | |
Reading package lists... Done | |
Building dependency tree... 0% | |
Building dependency tree... 0% | |
Building dependency tree... 0% | |
Building dependency tree... 50% | |
Building dependency tree... 50% | |
Building dependency tree... 99% | |
Building dependency tree... Done | |
Reading state information... 0% | |
Reading state information... 0% | |
Reading state information... Done | |
88 packages can be upgraded. Run 'apt list --upgradable' to see them. | |
ubuntu@potato:~$ sudo apt upgrade | |
Reading package lists... 0% | |
Reading package lists... 100% | |
Reading package lists... Done | |
Building dependency tree... 0% | |
Building dependency tree... 0% | |
Building dependency tree... 50% | |
Building dependency tree... 50% | |
Building dependency tree... 94% | |
Building dependency tree... Done | |
Reading state information... 0% | |
Reading state information... 0% | |
Reading state information... Done | |
Calculating upgrade... 0% | |
Calculating upgrade... 10% | |
Calculating upgrade... Done | |
The following packages were automatically installed and are no longer required: | |
devio libintl-perl libintl-xs-perl libmodule-find-perl | |
libmodule-scandeps-perl libproc-processtable-perl libsort-naturally-perl | |
libterm-readkey-perl | |
Use 'sudo apt autoremove' to remove them. | |
The following NEW packages will be installed: | |
linux-headers-6.0.19-02541-gd380b952927c | |
linux-image-6.0.19-02541-gd380b952927c | |
The following packages have been kept back: | |
libinput-bin libinput10 ubuntu-advantage-tools update-notifier-common | |
The following packages will be upgraded: | |
alsa-ucm-conf bind9-dnsutils bind9-host bind9-libs binutils | |
binutils-aarch64-linux-gnu binutils-common cloud-init curl dbus dbus-bin | |
dbus-daemon dbus-session-bus-common dbus-system-bus-common dbus-user-session | |
distro-info-data firmware-sof-signed gir1.2-nautilus-4.0 git git-man | |
grub-common grub2-common kpartx krb5-locales libbinutils libbpf0 | |
libctf-nobfd0 libctf0 libcurl3-gnutls libcurl4 libdbus-1-3 libexpat1 | |
libglib2.0-0 libglib2.0-bin libglib2.0-data libgprofng0 libgssapi-krb5-2 | |
libk5crypto3 libkrb5-3 libkrb5support0 libksba8 libnautilus-extension4 | |
libntfs-3g89 libpam-modules libpam-modules-bin libpam-runtime libpam0g | |
libperl5.34 libpython3.10 libpython3.10-minimal libpython3.10-stdlib libssl3 | |
libxml2 libxpm4 linux-firmware linux-headers-lc-stable-arm64 | |
linux-image-lc-stable-arm64 linux-libc-dev login multipath-tools ntfs-3g | |
openssh-client openssh-server openssh-sftp-server openssl passwd perl | |
perl-base perl-modules-5.34 python-apt-common python3-apt | |
python3-pkg-resources python3-setuptools python3.10 python3.10-minimal snapd | |
sosreport sudo systemd-hwe-hwdb tzdata xserver-common xserver-xorg-core | |
xserver-xorg-legacy xwayland | |
84 upgraded, 2 newly installed, 0 to remove and 4 not upgraded. | |
Need to get 375 MB of archives. | |
After this operation, 196 MB of additional disk space will be used. | |
Do you want to continue? [Y/n] Y | |
0% [Working] | |
Get:1 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 login arm64 1:4.11.1+dfsg1-2ubuntu1.1 [183 kB] | |
0% [1 login 1195 B/183 kB 1%] [Waiting for headers] | |
Get:2 https://deb.libre.computer/repo linux/main arm64 linux-headers-6.0.19-02541-gd380b952927c arm64 6.0.19-02541-gd380b952927c-1 [8211 kB] | |
0% [1 login 43.2 kB/183 kB 24%] [2 linux-headers-6.0.19-02541-gd380b952927c 16. | |
0% [2 linux-headers-6.0.19-02541-gd380b952927c 213 kB/8211 kB 3%] | |
Get:3 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libperl5.34 arm64 5.34.0-5ubuntu1.1 [4618 kB] | |
0% [3 libperl5.34 2641 B/4618 kB 0%] [2 linux-headers-6.0.19-02541-gd380b952927 | |
1% [3 libperl5.34 276 kB/4618 kB 6%] [2 linux-headers-6.0.19-02541-gd380b952927 | |
1% [3 libperl5.34 650 kB/4618 kB 14%] [2 linux-headers-6.0.19-02541-gd380b95292 | |
2% [3 libperl5.34 867 kB/4618 kB 19%] [2 linux-headers-6.0.19-02541-gd380b95292 | |
2% [3 libperl5.34 1063 kB/4618 kB 23%] [2 linux-headers-6.0.19-02541-gd380b9529 | |
3% [3 libperl5.34 1304 kB/4618 kB 28%] | |
Get:4 https://deb.libre.computer/repo linux/main arm64 linux-headers-lc-stable-arm64 arm64 6.0.19-02541-gd380b952927c-1 [1676 B] | |
3% [3 libperl5.34 1304 kB/4618 kB 28%] [4 linux-headers-lc-stable-arm64 1676 B/ | |
3% [3 libperl5.34 1304 kB/4618 kB 28%] | |
Get:5 https://deb.libre.computer/repo linux/main arm64 linux-image-6.0.19-02541-gd380b952927c arm64 6.0.19-02541-gd380b952927c-1 [30.2 MB] | |
3% [3 libperl5.34 1304 kB/4618 kB 28%] [5 linux-image-6.0.19-02541-gd380b952927 | |
3% [3 libperl5.34 1633 kB/4618 kB 35%] [5 linux-image-6.0.19-02541-gd380b952927 | |
4% [3 libperl5.34 1937 kB/4618 kB 42%] [5 linux-image-6.0.19-02541-gd380b952927 | |
4% [3 libperl5.34 2224 kB/4618 kB 48%] [5 linux-image-6.0.19-02541-gd380b952927 | |
4% [3 libperl5.34 2421 kB/4618 kB 52%] [5 linux-image-6.0.19-02541-gd380b952927 | |
5% [3 libperl5.34 2613 kB/4618 kB 57%] [5 linux-image-6.0.19-02541-gd380b952927 | |
5% [3 libperl5.34 2799 kB/4618 kB 61%] [5 linux-image-6.0.19-02541-gd380b952927 | |
5% [3 libperl5.34 2984 kB/4618 kB 65%] [5 linux-image-6.0.19-02541-gd380b952927 | |
6% [3 libperl5.34 3177 kB/4618 kB 69%] [5 linux-image-6.0.19-02541-gd380b952927 | |
6% [3 libperl5.34 3366 kB/4618 kB 73%] [5 linux-image-6.0.19-02541-gd380b952927 | |
7% [3 libperl5.34 3530 kB/4618 kB 76%] [5 linux-image-6.0.19-02541-gd380b952927 | |
7% [3 libperl5.34 3698 kB/4618 kB 80%] [5 linux-image-6.0.19-02541-gd380b952927 | |
7% [3 libperl5.34 3879 kB/4618 kB 84%] [5 linux-image-6.0.19-02541-gd380b952927 | |
8% [3 libperl5.34 4032 kB/4618 kB 87%] [5 linux-image-6.0.19-02541-gd380b952927 | |
8% [3 libperl5.34 4174 kB/4618 kB 90%] [5 linux-image-6.0.19-02541-gd380b952927 | |
8% [3 libperl5.34 4264 kB/4618 kB 92%] [5 linux-image-6.0.19-02541-gd380b952927 | |
9% [3 libperl5.34 4350 kB/4618 kB 94%] [5 linux-image-6.0.19-02541-gd380b952927 | |
9% [3 libperl5.34 4355 kB/4618 kB 94%] [5 linux-image-6.0.19-02541-gd380b952927 | |
9% [3 libperl5.34 4412 kB/4618 kB 96%] [5 linux-image-6.0.19-02541-gd380b952927 | |
10% [3 libperl5.34 4604 kB/4618 kB 100%] [5 linux-image-6.0.19-02541-gd380b9529 | |
10% [5 linux-image-6.0.19-02541-gd380b952927c 29.0 MB/30.2 MB 96%] | |
Get:6 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 perl arm64 5.34.0-5ubuntu1.1 [231 kB] | |
10% [6 perl 6598 B/231 kB 3%] [5 linux-image-6.0.19-02541-gd380b952927c 29.0 MB | |
10% [5 linux-image-6.0.19-02541-gd380b952927c 30.2 MB/30.2 MB 100%] | |
Get:7 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 perl-base arm64 5.34.0-5ubuntu1.1 [1701 kB] | |
10% [7 perl-base 19.7 kB/1701 kB 1%] [5 linux-image-6.0.19-02541-gd380b952927c | |
11% [7 perl-base 31.3 kB/1701 kB 2%] 3251 kB/s 1min 41s | |
Get:8 https://deb.libre.computer/repo linux/main arm64 linux-image-lc-stable-arm64 arm64 6.0.19-02541-gd380b952927c-1 [1680 B] | |
11% [7 perl-base 31.3 kB/1701 kB 2%] [8 linux-image-lc-stable-arm64 1680 B/1680 | |
11% [7 perl-base 31.3 kB/1701 kB 2%] 3251 kB/s 1min 41s | |
11% [7 perl-base 250 kB/1701 kB 15%] 3251 kB/s 1min 41s | |
11% [7 perl-base 528 kB/1701 kB 31%] 3251 kB/s 1min 41s | |
11% [7 perl-base 851 kB/1701 kB 50%] 3251 kB/s 1min 41s | |
11% [7 perl-base 1233 kB/1701 kB 72%] 3251 kB/s 1min 41s | |
11% [7 perl-base 1695 kB/1701 kB 100%] 3251 kB/s 1min 41s | |
11% [Working] 3251 kB/s 1min 41s | |
Get:9 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 perl-modules-5.34 all 5.34.0-5ubuntu1.1 [2952 kB] | |
11% [9 perl-modules-5.34 14.1 kB/2952 kB 0%] 3251 kB/s 1min 41s | |
12% [9 perl-modules-5.34 556 kB/2952 kB 19%] 3251 kB/s 1min 41s | |
12% [9 perl-modules-5.34 1187 kB/2952 kB 40%] 3251 kB/s 1min 41s | |
12% [9 perl-modules-5.34 1943 kB/2952 kB 66%] 3251 kB/s 1min 40s | |
12% [9 perl-modules-5.34 2810 kB/2952 kB 95%] 3251 kB/s 1min 40s | |
12% [Working] 3251 kB/s 1min 40s | |
Get:10 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libpam0g arm64 1.5.2-2ubuntu1.1 [60.0 kB] | |
12% [10 libpam0g 12.6 kB/60.0 kB 21%] 3251 kB/s 1min 40s | |
13% [Working] 3251 kB/s 1min 40s | |
Get:11 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libpam-modules-bin arm64 1.5.2-2ubuntu1.1 [43.4 kB] | |
13% [11 libpam-modules-bin 7222 B/43.4 kB 17%] 3251 kB/s 1min 40s | |
13% [Working] 3251 kB/s 1min 40s | |
Get:12 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libpam-modules arm64 1.5.2-2ubuntu1.1 [282 kB] | |
13% [12 libpam-modules 5525 B/282 kB 2%] 3251 kB/s 1min 40s | |
13% [Working] 3251 kB/s 1min 40s | |
Get:13 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libexpat1 arm64 2.4.8-2ubuntu0.22.10.1 [72.1 kB] | |
13% [13 libexpat1 7283 B/72.1 kB 10%] 3251 kB/s 1min 40s | |
13% [Working] 3251 kB/s 1min 40s | |
Get:14 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libpython3.10 arm64 3.10.7-1ubuntu0.2 [1866 kB] | |
13% [14 libpython3.10 5832 B/1866 kB 0%] 3251 kB/s 1min 40s | |
14% [14 libpython3.10 1147 kB/1866 kB 61%] 1485 kB/s 3min 39s | |
Get:15 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libssl3 arm64 3.0.5-2ubuntu2 [1752 kB] | |
14% [15 libssl3 12.2 kB/1752 kB 1%] 1485 kB/s 3min 38s | |
14% [15 libssl3 1582 kB/1752 kB 90%] 1485 kB/s 3min 37s | |
15% [Working] 1485 kB/s 3min 37s | |
Get:16 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 python3.10 arm64 3.10.7-1ubuntu0.2 [497 kB] | |
15% [16 python3.10 0 B/497 kB 0%] 1485 kB/s 3min 37s | |
15% [Working] 1485 kB/s 3min 37s | |
Get:17 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libpython3.10-stdlib arm64 3.10.7-1ubuntu0.2 [1762 kB] | |
15% [17 libpython3.10-stdlib 0 B/1762 kB 0%] 1485 kB/s 3min 37s | |
16% [Working] 1485 kB/s 3min 35s | |
Get:18 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 python3.10-minimal arm64 3.10.7-1ubuntu0.2 [1988 kB] | |
16% [18 python3.10-minimal 0 B/1988 kB 0%] 1485 kB/s 3min 35s | |
16% [Working] 1485 kB/s 3min 34s | |
Get:19 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libpython3.10-minimal arm64 3.10.7-1ubuntu0.2 [798 kB] | |
16% [19 libpython3.10-minimal 0 B/798 kB 0%] 1485 kB/s 3min 34s | |
17% [Working] 1485 kB/s 3min 34s | |
Get:20 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 ntfs-3g arm64 1:2022.5.17-1ubuntu1.1 [396 kB] | |
17% [20 ntfs-3g 30.6 kB/396 kB 8%] 1485 kB/s 3min 33s | |
17% [Working] 1485 kB/s 3min 33s | |
Get:21 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libntfs-3g89 arm64 1:2022.5.17-1ubuntu1.1 [156 kB] | |
17% [21 libntfs-3g89 0 B/156 kB 0%] 1485 kB/s 3min 33s | |
17% [Working] 1485 kB/s 3min 33s | |
Get:22 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libgssapi-krb5-2 arm64 1.20-1ubuntu0.1 [139 kB] | |
17% [22 libgssapi-krb5-2 0 B/139 kB 0%] 1485 kB/s 3min 33s | |
17% [Working] 1485 kB/s 3min 33s | |
Get:23 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libkrb5-3 arm64 1.20-1ubuntu0.1 [345 kB] | |
17% [23 libkrb5-3 0 B/345 kB 0%] 1485 kB/s 3min 33s | |
18% [Working] 1485 kB/s 3min 33s | |
Get:24 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libkrb5support0 arm64 1.20-1ubuntu0.1 [31.3 kB] | |
18% [24 libkrb5support0 31.3 kB/31.3 kB 100%] 1485 kB/s 3min 33s | |
Get:25 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libk5crypto3 arm64 1.20-1ubuntu0.1 [85.0 kB] | |
18% [25 libk5crypto3 85.0 kB/85.0 kB 100%] 1485 kB/s 3min 33s | |
18% [Working] 1485 kB/s 3min 33s | |
Get:26 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libcurl3-gnutls arm64 7.85.0-1ubuntu0.2 [281 kB] | |
18% [26 libcurl3-gnutls 0 B/281 kB 0%] 1485 kB/s 3min 33s | |
19% [Working] 1485 kB/s 3min 33s | |
Get:27 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 git-man all 1:2.37.2-1ubuntu1.2 [975 kB] | |
19% [27 git-man 0 B/975 kB 0%] 1485 kB/s 3min 33s | |
19% [Working] 1485 kB/s 3min 32s | |
Get:28 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 git arm64 1:2.37.2-1ubuntu1.2 [3352 kB] | |
19% [28 git 0 B/3352 kB 0%] 1485 kB/s 3min 32s | |
20% [Working] 1485 kB/s 3min 30s | |
Get:29 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 passwd arm64 1:4.11.1+dfsg1-2ubuntu1.1 [759 kB] | |
20% [29 passwd 0 B/759 kB 0%] 1485 kB/s 3min 30s | |
20% [Working] 1485 kB/s 3min 29s | |
Get:30 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 openssh-sftp-server arm64 1:9.0p1-1ubuntu7.1 [36.1 kB] | |
20% [30 openssh-sftp-server 0 B/36.1 kB 0%] 1485 kB/s 3min 29s | |
21% [Working] 1485 kB/s 3min 29s | |
Get:31 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 openssh-server arm64 1:9.0p1-1ubuntu7.1 [409 kB] | |
21% [31 openssh-server 60.6 kB/409 kB 15%] 1485 kB/s 3min 29s | |
21% [Working] 1485 kB/s 3min 29s | |
Get:32 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 openssh-client arm64 1:9.0p1-1ubuntu7.1 [831 kB] | |
21% [32 openssh-client 0 B/831 kB 0%] 1485 kB/s 3min 29s | |
21% [Working] 1485 kB/s 3min 28s | |
Get:33 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libpam-runtime all 1.5.2-2ubuntu1.1 [40.0 kB] | |
21% [33 libpam-runtime 0 B/40.0 kB 0%] 1485 kB/s 3min 28s | |
22% [Working] 1485 kB/s 3min 28s | |
Get:34 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 dbus-session-bus-common all 1.14.0-2ubuntu3 [73.0 kB] | |
22% [34 dbus-session-bus-common 73.0 kB/73.0 kB 100%] 1485 kB/s 3min 28s | |
22% [Waiting for headers] 1485 kB/s 3min 28s | |
Get:35 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 dbus-user-session arm64 1.14.0-2ubuntu3 [10.1 kB] | |
22% [35 dbus-user-session 0 B/10.1 kB 0%] 1485 kB/s 3min 28s | |
22% [Working] 1485 kB/s 3min 28s | |
Get:36 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 dbus-daemon arm64 1.14.0-2ubuntu3 [114 kB] | |
22% [36 dbus-daemon 0 B/114 kB 0%] 1485 kB/s 3min 28s | |
22% [Working] 1485 kB/s 3min 28s | |
Get:37 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libdbus-1-3 arm64 1.14.0-2ubuntu3 [200 kB] | |
22% [37 libdbus-1-3 0 B/200 kB 0%] 1485 kB/s 3min 28s | |
Get:38 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 dbus-system-bus-common all 1.14.0-2ubuntu3 [74.2 kB] | |
23% [38 dbus-system-bus-common 74.2 kB/74.2 kB 100%] 1485 kB/s 3min 28s | |
23% [Working] 1485 kB/s 3min 28s | |
Get:39 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 dbus arm64 1.14.0-2ubuntu3 [23.7 kB] | |
23% [39 dbus 0 B/23.7 kB 0%] 1485 kB/s 3min 28s | |
23% [Working] 1485 kB/s 3min 28s | |
Get:40 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 dbus-bin arm64 1.14.0-2ubuntu3 [38.9 kB] | |
23% [40 dbus-bin 0 B/38.9 kB 0%] 1485 kB/s 3min 28s | |
23% [Working] 1485 kB/s 3min 28s | |
Get:41 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 distro-info-data all 0.54ubuntu0.1 [5242 B] | |
23% [41 distro-info-data 5242 B/5242 B 100%] 1485 kB/s 3min 28s | |
24% [Working] 1485 kB/s 3min 28s | |
Get:42 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 krb5-locales all 1.20-1ubuntu0.1 [11.6 kB] | |
24% [42 krb5-locales 0 B/11.6 kB 0%] 1485 kB/s 3min 28s | |
24% [Working] 1485 kB/s 3min 28s | |
Get:43 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libbpf0 arm64 1:0.8.0-1ubuntu22.10.1 [164 kB] | |
24% [43 libbpf0 1195 B/164 kB 1%] 1485 kB/s 3min 28s | |
24% [Working] 1485 kB/s 3min 28s | |
Get:44 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libglib2.0-data all 2.74.3-0ubuntu1 [19.0 kB] | |
24% [44 libglib2.0-data 19.0 kB/19.0 kB 100%] 1485 kB/s 3min 28s | |
24% [Working] 1485 kB/s 3min 28s | |
Get:45 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libglib2.0-bin arm64 2.74.3-0ubuntu1 [92.1 kB] | |
24% [45 libglib2.0-bin 0 B/92.1 kB 0%] 1485 kB/s 3min 28s | |
25% [Working] 1485 kB/s 3min 28s | |
Get:46 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libglib2.0-0 arm64 2.74.3-0ubuntu1 [1448 kB] | |
25% [46 libglib2.0-0 32.5 kB/1448 kB 2%] 1485 kB/s 3min 28s | |
25% [Working] 1485 kB/s 3min 27s | |
Get:47 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libxml2 arm64 2.9.14+dfsg-1ubuntu0.1 [722 kB] | |
25% [47 libxml2 30.7 kB/722 kB 4%] 1485 kB/s 3min 27s | |
25% [Working] 1485 kB/s 3min 26s | |
Get:48 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 openssl arm64 3.0.5-2ubuntu2 [1158 kB] | |
25% [48 openssl 28.1 kB/1158 kB 2%] 1485 kB/s 3min 26s | |
26% [Working] 1485 kB/s 3min 25s | |
Get:49 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 python-apt-common all 2.4.0+22.10 [14.8 kB] | |
26% [49 python-apt-common 14.8 kB/14.8 kB 100%] 1485 kB/s 3min 25s | |
26% [Working] 1485 kB/s 3min 25s | |
Get:50 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 python3-apt arm64 2.4.0+22.10 [156 kB] | |
26% [50 python3-apt 0 B/156 kB 0%] 1485 kB/s 3min 25s | |
26% [Working] 1485 kB/s 3min 25s | |
Get:51 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 python3-setuptools all 59.6.0-1.2ubuntu0.22.10.1 [339 kB] | |
26% [51 python3-setuptools 16.8 kB/339 kB 5%] 1485 kB/s 3min 25s | |
27% [Working] 1485 kB/s 3min 25s | |
Get:52 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 python3-pkg-resources all 59.6.0-1.2ubuntu0.22.10.1 [132 kB] | |
27% [52 python3-pkg-resources 11.4 kB/132 kB 9%] 1485 kB/s 3min 25s | |
27% [Working] 1485 kB/s 3min 25s | |
Get:53 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 sudo arm64 1.9.11p3-1ubuntu1.1 [823 kB] | |
27% [53 sudo 10.2 kB/823 kB 1%] 1485 kB/s 3min 25s | |
27% [Working] 1485 kB/s 3min 24s | |
Get:54 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 systemd-hwe-hwdb all 251.4.3 [2684 B] | |
27% [54 systemd-hwe-hwdb 2684 B/2684 B 100%] 1485 kB/s 3min 24s | |
28% [Working] 1485 kB/s 3min 24s | |
Get:55 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 tzdata all 2022g-0ubuntu0.22.10.1 [401 kB] | |
28% [55 tzdata 0 B/401 kB 0%] 1485 kB/s 3min 24s | |
Get:56 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 bind9-host arm64 1:9.18.4-2ubuntu2.1 [48.8 kB] | |
28% [56 bind9-host 27.6 kB/48.8 kB 56%] 1485 kB/s 3min 24s | |
28% [Working] 1485 kB/s 3min 24s | |
Get:57 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 bind9-dnsutils arm64 1:9.18.4-2ubuntu2.1 [153 kB] | |
28% [57 bind9-dnsutils 12.9 kB/153 kB 8%] 1485 kB/s 3min 24s | |
28% [Working] 1485 kB/s 3min 24s | |
Get:58 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 bind9-libs arm64 1:9.18.4-2ubuntu2.1 [1159 kB] | |
28% [58 bind9-libs 1575 B/1159 kB 0%] 1485 kB/s 3min 24s | |
29% [Working] 1485 kB/s 3min 23s | |
Get:59 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 alsa-ucm-conf all 1.2.6.3-1ubuntu3 [41.2 kB] | |
29% [59 alsa-ucm-conf 31.6 kB/41.2 kB 77%] 1485 kB/s 3min 23s | |
29% [Working] 1485 kB/s 3min 23s | |
Get:60 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libctf-nobfd0 arm64 2.39-3ubuntu1.1 [96.7 kB] | |
29% [60 libctf-nobfd0 8898 B/96.7 kB 9%] 1485 kB/s 3min 23s | |
29% [Working] 1485 kB/s 3min 23s | |
Get:61 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libgprofng0 arm64 2.39-3ubuntu1.1 [791 kB] | |
29% [61 libgprofng0 17.7 kB/791 kB 2%] 1485 kB/s 3min 23s | |
30% [Working] 1485 kB/s 3min 23s | |
Get:62 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libctf0 arm64 2.39-3ubuntu1.1 [92.9 kB] | |
30% [62 libctf0 26.7 kB/92.9 kB 29%] 1485 kB/s 3min 23s | |
30% [Working] 1485 kB/s 3min 23s | |
Get:63 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 binutils-aarch64-linux-gnu arm64 2.39-3ubuntu1.1 [3133 kB] | |
30% [63 binutils-aarch64-linux-gnu 88 B/3133 kB 0%] 1485 kB/s 3min 23s | |
31% [Working] 1485 kB/s 3min 20s | |
Get:64 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libbinutils arm64 2.39-3ubuntu1.1 [709 kB] | |
31% [64 libbinutils 14.4 kB/709 kB 2%] 1485 kB/s 3min 20s | |
31% [Working] 1485 kB/s 3min 20s | |
Get:65 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 binutils arm64 2.39-3ubuntu1.1 [3272 B] | |
31% [65 binutils 3272 B/3272 B 100%] 1485 kB/s 3min 20s | |
32% [Working] 1485 kB/s 3min 20s | |
Get:66 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 binutils-common arm64 2.39-3ubuntu1.1 [225 kB] | |
32% [66 binutils-common 0 B/225 kB 0%] 1485 kB/s 3min 20s | |
32% [Working] 1485 kB/s 3min 20s | |
Get:67 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 curl arm64 7.85.0-1ubuntu0.2 [196 kB] | |
32% [67 curl 20.5 kB/196 kB 10%] 1485 kB/s 3min 20s | |
32% [Working] 1485 kB/s 3min 20s | |
Get:68 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libcurl4 arm64 7.85.0-1ubuntu0.2 [286 kB] | |
32% [68 libcurl4 18.6 kB/286 kB 6%] 1485 kB/s 3min 20s | |
32% [Working] 1485 kB/s 3min 20s | |
Get:69 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 firmware-sof-signed all 2.1.1-1ubuntu1.1 [839 kB] | |
32% [69 firmware-sof-signed 14.4 kB/839 kB 2%] 1485 kB/s 3min 19s | |
33% [Working] 1485 kB/s 3min 19s | |
Get:70 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libnautilus-extension4 arm64 1:43.0-1ubuntu2.1 [16.1 kB] | |
33% [70 libnautilus-extension4 16.1 kB/16.1 kB 100%] 1485 kB/s 3min 19s | |
33% [Working] 1485 kB/s 3min 19s | |
Get:71 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 gir1.2-nautilus-4.0 arm64 1:43.0-1ubuntu2.1 [5464 B] | |
33% [71 gir1.2-nautilus-4.0 0 B/5464 B 0%] 1485 kB/s 3min 19s | |
33% [Working] 1485 kB/s 3min 19s | |
Get:72 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 grub2-common arm64 2.06-2ubuntu12.1 [645 kB] | |
33% [72 grub2-common 26.7 kB/645 kB 4%] 1485 kB/s 3min 19s | |
34% [Waiting for headers] 1485 kB/s 3min 18s | |
Get:73 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 grub-common arm64 2.06-2ubuntu12.1 [2209 kB] | |
34% [73 grub-common 36.5 kB/2209 kB 2%] 1485 kB/s 3min 18s | |
34% [Working] 1485 kB/s 3min 17s | |
Get:74 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libksba8 arm64 1.6.0-3ubuntu1.1 [116 kB] | |
34% [74 libksba8 41.0 kB/116 kB 35%] 1485 kB/s 3min 17s | |
35% [Working] 1485 kB/s 3min 17s | |
Get:75 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 libxpm4 arm64 1:3.5.12-1ubuntu0.22.10.1 [35.4 kB] | |
35% [75 libxpm4 4962 B/35.4 kB 14%] 1485 kB/s 3min 17s | |
35% [Working] 1485 kB/s 3min 17s | |
Get:76 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 linux-firmware all 20220923.gitf09bebf3-0ubuntu1.3 [266 MB] | |
35% [76 linux-firmware 14.5 kB/266 MB 0%] 1485 kB/s 3min 17s | |
36% [76 linux-firmware 3229 kB/266 MB 1%] 1485 kB/s 3min 15s | |
37% [76 linux-firmware 8206 kB/266 MB 3%] 6702 kB/s 42s | |
38% [76 linux-firmware 12.8 MB/266 MB 5%] 6702 kB/s 41s | |
39% [76 linux-firmware 18.5 MB/266 MB 7%] 6702 kB/s 40s | |
40% [76 linux-firmware 24.4 MB/266 MB 9%] 6702 kB/s 40s | |
41% [76 linux-firmware 30.1 MB/266 MB 11%] 6702 kB/s 39s | |
43% [76 linux-firmware 35.8 MB/266 MB 13%] 6702 kB/s 38s | |
44% [76 linux-firmware 40.9 MB/266 MB 15%] 6702 kB/s 37s | |
45% [76 linux-firmware 46.4 MB/266 MB 17%] 6702 kB/s 36s | |
46% [76 linux-firmware 52.8 MB/266 MB 20%] 6702 kB/s 35s | |
47% [76 linux-firmware 57.8 MB/266 MB 22%] 6702 kB/s 35s | |
48% [76 linux-firmware 63.4 MB/266 MB 24%] 6702 kB/s 34s | |
50% [76 linux-firmware 69.4 MB/266 MB 26%] 6702 kB/s 33s | |
51% [76 linux-firmware 74.7 MB/266 MB 28%] 11.1 MB/s 19s | |
52% [76 linux-firmware 80.6 MB/266 MB 30%] 11.1 MB/s 19s | |
53% [76 linux-firmware 86.3 MB/266 MB 32%] 11.1 MB/s 18s | |
54% [76 linux-firmware 91.8 MB/266 MB 34%] 11.1 MB/s 18s | |
56% [76 linux-firmware 97.5 MB/266 MB 37%] 11.1 MB/s 17s | |
57% [76 linux-firmware 104 MB/266 MB 39%] 11.1 MB/s 17s | |
58% [76 linux-firmware 109 MB/266 MB 41%] 11.1 MB/s 16s | |
59% [76 linux-firmware 115 MB/266 MB 43%] 11.1 MB/s 16s | |
60% [76 linux-firmware 119 MB/266 MB 45%] 11.1 MB/s 15s | |
61% [76 linux-firmware 123 MB/266 MB 46%] 11.1 MB/s 15s | |
62% [76 linux-firmware 129 MB/266 MB 48%] 11.1 MB/s 14s | |
63% [76 linux-firmware 134 MB/266 MB 50%] 11.1 MB/s 14s | |
65% [76 linux-firmware 140 MB/266 MB 53%] 10.9 MB/s 14s | |
66% [76 linux-firmware 145 MB/266 MB 55%] 10.9 MB/s 13s | |
67% [76 linux-firmware 151 MB/266 MB 57%] 10.9 MB/s 13s | |
68% [76 linux-firmware 157 MB/266 MB 59%] 10.9 MB/s 12s | |
70% [76 linux-firmware 162 MB/266 MB 61%] 10.9 MB/s 12s | |
71% [76 linux-firmware 167 MB/266 MB 63%] 10.9 MB/s 11s | |
72% [76 linux-firmware 173 MB/266 MB 65%] 10.9 MB/s 11s | |
73% [76 linux-firmware 178 MB/266 MB 67%] 10.9 MB/s 10s | |
74% [76 linux-firmware 184 MB/266 MB 69%] 10.9 MB/s 10s | |
75% [76 linux-firmware 190 MB/266 MB 71%] 10.9 MB/s 9s | |
77% [76 linux-firmware 195 MB/266 MB 73%] 10.9 MB/s 9s | |
78% [76 linux-firmware 201 MB/266 MB 76%] 10.9 MB/s 8s | |
79% [76 linux-firmware 207 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 11.1 MB/s 7s | |
79% [76 linux-firmware 209 MB/266 MB 78%] 312 kB/s 4min 30s | |
80% [76 linux-firmware 213 MB/266 MB 80%] 312 kB/s 4min 16s | |
81% [76 linux-firmware 215 MB/266 MB 81%] 312 kB/s 4min 10s | |
82% [76 linux-firmware 221 MB/266 MB 83%] 312 kB/s 3min 50s | |
83% [76 linux-firmware 227 MB/266 MB 85%] 312 kB/s 3min 33s | |
84% [76 linux-firmware 232 MB/266 MB 87%] 312 kB/s 3min 15s | |
86% [76 linux-firmware 238 MB/266 MB 89%] 312 kB/s 2min 56s | |
87% [76 linux-firmware 244 MB/266 MB 92%] 312 kB/s 2min 36s | |
88% [76 linux-firmware 249 MB/266 MB 94%] 312 kB/s 2min 20s | |
89% [76 linux-firmware 255 MB/266 MB 96%] 312 kB/s 2min 2s | |
91% [76 linux-firmware 261 MB/266 MB 98%] 312 kB/s 1min 43s | |
92% [76 linux-firmware 266 MB/266 MB 100%] 312 kB/s 1min 26s | |
92% [Working] 312 kB/s 1min 26s | |
Get:77 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 linux-libc-dev arm64 5.19.0-29.30 [1317 kB] | |
92% [77 linux-libc-dev 5537 B/1317 kB 0%] 312 kB/s 1min 26s | |
92% [77 linux-libc-dev 520 kB/1317 kB 39%] 9269 kB/s 2s | |
92% [Working] 9269 kB/s 2s | |
Get:78 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 snapd arm64 2.57.5+22.10ubuntu0.1 [22.1 MB] | |
92% [78 snapd 4087 B/22.1 MB 0%] 9269 kB/s 2s | |
93% [78 snapd 2835 kB/22.1 MB 13%] 9269 kB/s 2s | |
94% [78 snapd 7929 kB/22.1 MB 36%] 9269 kB/s 1s | |
95% [78 snapd 12.5 MB/22.1 MB 57%] 9269 kB/s 1s | |
96% [78 snapd 18.2 MB/22.1 MB 82%] 9269 kB/s 0s | |
97% [Working] 9269 kB/s 0s | |
Get:79 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 sosreport arm64 4.4-1ubuntu1.22.10.1 [308 kB] | |
97% [79 sosreport 4091 B/308 kB 1%] 9269 kB/s 0s | |
98% [Working] 9269 kB/s 0s | |
Get:80 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 xserver-common all 2:21.1.4-2ubuntu1.3 [27.9 kB] | |
98% [80 xserver-common 2645 B/27.9 kB 9%] 9269 kB/s 0s | |
98% [Working] 9269 kB/s 0s | |
Get:81 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 xserver-xorg-legacy arm64 2:21.1.4-2ubuntu1.3 [34.4 kB] | |
98% [81 xserver-xorg-legacy 11.7 kB/34.4 kB 34%] 9269 kB/s 0s | |
98% [Working] 9269 kB/s 0s | |
Get:82 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 xserver-xorg-core arm64 2:21.1.4-2ubuntu1.3 [1426 kB] | |
98% [82 xserver-xorg-core 6985 B/1426 kB 0%] 9269 kB/s 0s | |
99% [Working] 9269 kB/s 0s | |
Get:83 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 xwayland arm64 2:22.1.3-2ubuntu0.2 [907 kB] | |
99% [83 xwayland 5539 B/907 kB 1%] 9269 kB/s 0s | |
99% [Working] 9269 kB/s 0s | |
Get:84 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 cloud-init all 22.4.2-0ubuntu0~22.10.1 [519 kB] | |
99% [84 cloud-init 3064 B/519 kB 1%] 9269 kB/s 0s | |
99% [Working] 9269 kB/s 0s | |
Get:85 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 kpartx arm64 0.8.8-1ubuntu1.22.10.1 [27.6 kB] | |
99% [85 kpartx 7771 B/27.6 kB 28%] 9269 kB/s 0s | |
100% [Working] 9269 kB/s 0s | |
Get:86 http://ports.ubuntu.com/ubuntu-ports kinetic-updates/main arm64 multipath-tools arm64 0.8.8-1ubuntu1.22.10.1 [319 kB] | |
100% [86 multipath-tools 8435 B/319 kB 3%] 9269 kB/s 0s | |
100% [Working] 9269 kB/s 0s | |
Fetched 375 MB in 59s (6390 kB/s) | |
Extracting templates from packages: 34% | |
Extracting templates from packages: 69% | |
Extracting templates from packages: 100% | |
Preconfiguring packages ... | |
setting xserver-xorg-legacy/xwrapper/allowed_users from configuration file | |
(Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76254 files and directories currently installed.) | |
Preparing to unpack .../login_1%3a4.11.1+dfsg1-2ubuntu1.1_arm64.deb ... | |
Progress: [ 0%] [..........................................................] Unpacking login (1:4.11.1+dfsg1-2ubuntu1.1) over (1:4.11.1+dfsg1-2ubuntu1) ... | |
Setting up login (1:4.11.1+dfsg1-2ubuntu1.1) ... | |
Progress: [ 1%] [..........................................................] (Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76254 files and directories currently installed.) | |
Preparing to unpack .../libperl5.34_5.34.0-5ubuntu1.1_arm64.deb ... | |
Unpacking libperl5.34:arm64 (5.34.0-5ubuntu1.1) over (5.34.0-5ubuntu1) ... | |
Preparing to unpack .../perl_5.34.0-5ubuntu1.1_arm64.deb ... | |
Progress: [ 2%] [#.........................................................] Unpacking perl (5.34.0-5ubuntu1.1) over (5.34.0-5ubuntu1) ... | |
Preparing to unpack .../perl-base_5.34.0-5ubuntu1.1_arm64.deb ... | |
Unpacking perl-base (5.34.0-5ubuntu1.1) over (5.34.0-5ubuntu1) ... | |
Setting up perl-base (5.34.0-5ubuntu1.1) ... | |
Progress: [ 3%] [#.........................................................] (Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76256 files and directories currently installed.) | |
Preparing to unpack .../perl-modules-5.34_5.34.0-5ubuntu1.1_all.deb ... | |
Unpacking perl-modules-5.34 (5.34.0-5ubuntu1.1) over (5.34.0-5ubuntu1) ... | |
Progress: [ 4%] [##........................................................] Preparing to unpack .../libpam0g_1.5.2-2ubuntu1.1_arm64.deb ... | |
Unpacking libpam0g:arm64 (1.5.2-2ubuntu1.1) over (1.5.2-2ubuntu1) ... | |
Setting up libpam0g:arm64 (1.5.2-2ubuntu1.1) ... | |
Progress: [ 5%] [###.......................................................] (Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76256 files and directories currently installed.) | |
Preparing to unpack .../libpam-modules-bin_1.5.2-2ubuntu1.1_arm64.deb ... | |
Unpacking libpam-modules-bin (1.5.2-2ubuntu1.1) over (1.5.2-2ubuntu1) ... | |
Setting up libpam-modules-bin (1.5.2-2ubuntu1.1) ... | |
Progress: [ 6%] [###.......................................................] (Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76256 files and directories currently installed.) | |
Preparing to unpack .../libpam-modules_1.5.2-2ubuntu1.1_arm64.deb ... | |
Unpacking libpam-modules:arm64 (1.5.2-2ubuntu1.1) over (1.5.2-2ubuntu1) ... | |
Setting up libpam-modules:arm64 (1.5.2-2ubuntu1.1) ... | |
Progress: [ 7%] [####......................................................] (Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76256 files and directories currently installed.) | |
Preparing to unpack .../00-libexpat1_2.4.8-2ubuntu0.22.10.1_arm64.deb ... | |
Unpacking libexpat1:arm64 (2.4.8-2ubuntu0.22.10.1) over (2.4.8-2) ... | |
Progress: [ 8%] [####......................................................] Preparing to unpack .../01-libpython3.10_3.10.7-1ubuntu0.2_arm64.deb ... | |
Unpacking libpython3.10:arm64 (3.10.7-1ubuntu0.2) over (3.10.7-1) ... | |
Preparing to unpack .../02-libssl3_3.0.5-2ubuntu2_arm64.deb ... | |
Unpacking libssl3:arm64 (3.0.5-2ubuntu2) over (3.0.5-2ubuntu1) ... | |
Progress: [ 9%] [#####.....................................................] Preparing to unpack .../03-python3.10_3.10.7-1ubuntu0.2_arm64.deb ... | |
Unpacking python3.10 (3.10.7-1ubuntu0.2) over (3.10.7-1) ... | |
Preparing to unpack .../04-libpython3.10-stdlib_3.10.7-1ubuntu0.2_arm64.deb ... | |
Progress: [ 10%] [#####.....................................................] Unpacking libpython3.10-stdlib:arm64 (3.10.7-1ubuntu0.2) over (3.10.7-1) ... | |
Preparing to unpack .../05-python3.10-minimal_3.10.7-1ubuntu0.2_arm64.deb ... | |
Unpacking python3.10-minimal (3.10.7-1ubuntu0.2) over (3.10.7-1) ... | |
Progress: [ 11%] [######....................................................] Preparing to unpack .../06-libpython3.10-minimal_3.10.7-1ubuntu0.2_arm64.deb ... | |
Unpacking libpython3.10-minimal:arm64 (3.10.7-1ubuntu0.2) over (3.10.7-1) ... | |
Preparing to unpack .../07-ntfs-3g_1%3a2022.5.17-1ubuntu1.1_arm64.deb ... | |
Unpacking ntfs-3g (1:2022.5.17-1ubuntu1.1) over (1:2022.5.17-1ubuntu1) ... | |
Progress: [ 12%] [#######...................................................] Preparing to unpack .../08-libntfs-3g89_1%3a2022.5.17-1ubuntu1.1_arm64.deb ... | |
Unpacking libntfs-3g89 (1:2022.5.17-1ubuntu1.1) over (1:2022.5.17-1ubuntu1) ... | |
Preparing to unpack .../09-libgssapi-krb5-2_1.20-1ubuntu0.1_arm64.deb ... | |
Progress: [ 13%] [#######...................................................] Unpacking libgssapi-krb5-2:arm64 (1.20-1ubuntu0.1) over (1.20-1) ... | |
Preparing to unpack .../10-libkrb5-3_1.20-1ubuntu0.1_arm64.deb ... | |
Unpacking libkrb5-3:arm64 (1.20-1ubuntu0.1) over (1.20-1) ... | |
Preparing to unpack .../11-libkrb5support0_1.20-1ubuntu0.1_arm64.deb ... | |
Progress: [ 14%] [########..................................................] Unpacking libkrb5support0:arm64 (1.20-1ubuntu0.1) over (1.20-1) ... | |
Preparing to unpack .../12-libk5crypto3_1.20-1ubuntu0.1_arm64.deb ... | |
Unpacking libk5crypto3:arm64 (1.20-1ubuntu0.1) over (1.20-1) ... | |
Progress: [ 15%] [########..................................................] Preparing to unpack .../13-libcurl3-gnutls_7.85.0-1ubuntu0.2_arm64.deb ... | |
Unpacking libcurl3-gnutls:arm64 (7.85.0-1ubuntu0.2) over (7.85.0-1) ... | |
Preparing to unpack .../14-git-man_1%3a2.37.2-1ubuntu1.2_all.deb ... | |
Unpacking git-man (1:2.37.2-1ubuntu1.2) over (1:2.37.2-1ubuntu1.1) ... | |
Progress: [ 16%] [#########.................................................] Preparing to unpack .../15-git_1%3a2.37.2-1ubuntu1.2_arm64.deb ... | |
Unpacking git (1:2.37.2-1ubuntu1.2) over (1:2.37.2-1ubuntu1.1) ... | |
Preparing to unpack .../16-passwd_1%3a4.11.1+dfsg1-2ubuntu1.1_arm64.deb ... | |
Progress: [ 17%] [#########.................................................] Unpacking passwd (1:4.11.1+dfsg1-2ubuntu1.1) over (1:4.11.1+dfsg1-2ubuntu1) ... | |
Setting up passwd (1:4.11.1+dfsg1-2ubuntu1.1) ... | |
(Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76256 files and directories currently installed.) | |
Preparing to unpack .../openssh-sftp-server_1%3a9.0p1-1ubuntu7.1_arm64.deb ... | |
Progress: [ 18%] [##########................................................] Unpacking openssh-sftp-server (1:9.0p1-1ubuntu7.1) over (1:9.0p1-1ubuntu7) ... | |
Preparing to unpack .../openssh-server_1%3a9.0p1-1ubuntu7.1_arm64.deb ... | |
Unpacking openssh-server (1:9.0p1-1ubuntu7.1) over (1:9.0p1-1ubuntu7) ... | |
Progress: [ 19%] [###########...............................................] Preparing to unpack .../openssh-client_1%3a9.0p1-1ubuntu7.1_arm64.deb ... | |
Unpacking openssh-client (1:9.0p1-1ubuntu7.1) over (1:9.0p1-1ubuntu7) ... | |
Preparing to unpack .../libpam-runtime_1.5.2-2ubuntu1.1_all.deb ... | |
Progress: [ 20%] [###########...............................................] Unpacking libpam-runtime (1.5.2-2ubuntu1.1) over (1.5.2-2ubuntu1) ... | |
Setting up libpam-runtime (1.5.2-2ubuntu1.1) ... | |
(Reading database ... | |
(Reading database ... 5% | |
(Reading database ... 10% | |
(Reading database ... 15% | |
(Reading database ... 20% | |
(Reading database ... 25% | |
(Reading database ... 30% | |
(Reading database ... 35% | |
(Reading database ... 40% | |
(Reading database ... 45% | |
(Reading database ... 50% | |
(Reading database ... 55% | |
(Reading database ... 60% | |
(Reading database ... 65% | |
(Reading database ... 70% | |
(Reading database ... 75% | |
(Reading database ... 80% | |
(Reading database ... 85% | |
(Reading database ... 90% | |
(Reading database ... 95% | |
(Reading database ... 100% | |
(Reading database ... 76256 files and directories currently installed.) | |
Preparing to unpack .../00-dbus-session-bus-common_1.14.0-2ubuntu3_all.deb ... | |
Progress: [ 21%] [############..............................................] Unpacking dbus-session-bus-common (1.14.0-2ubuntu3) over (1.14.0-2ubuntu2) ... | |
Preparing to unpack .../01-dbus-user-session_1.14.0-2ubuntu3_arm64.deb ... | |
Unpacking dbus-user-session (1.14.0-2ubuntu3) over (1.14.0-2ubuntu2) ... | |
Progress: [ 22%] [############..............................................] Preparing to unpack .../02-dbus-daemon_1.14.0-2ubuntu3_arm64.deb ... | |
Unpacking dbus-daemon (1.14.0-2ubuntu3) over (1.14.0-2ubuntu2) ... | |
Preparing to unpack .../03-libdbus-1-3_1.14.0-2ubuntu3_arm64.deb ... | |
Unpacking libdbus-1-3:arm64 (1.14.0-2ubuntu3) over (1.14.0-2ubuntu2) ... | |
Progress: [ 23%] [#############.............................................] Preparing to unpack .../04-dbus-system-bus-common_1.14.0-2ubuntu3_all.deb ... | |
Unpacking dbus-system-bus-common (1.14.0-2ubuntu3) over (1.14.0-2ubuntu2) ... | |
Preparing to unpack .../05-dbus_1.14.0-2ubuntu3_arm64.deb ... | |
Progress: [ 24%] [#############.............................................] Unpacking dbus (1.14.0-2ubuntu3) over (1.14.0-2ubuntu2) ... | |
Preparing to unpack .../06-dbus-bin_1.14.0-2ubuntu3_arm64.deb ... | |
Unpacking dbus-bin (1.14.0-2ubuntu3) over (1.14.0-2ubuntu2) ... | |
Preparing to unpack .../07-distro-info-data_0.54ubuntu0.1_all.deb ... | |
Progress: [ 25%] [##############............................................] Unpacking distro-info-data (0.54ubuntu0.1) over (0.54) ... | |
Preparing to unpack .../08-krb5-locales_1.20-1ubuntu0.1_all.deb ... | |
Unpacking krb5-locales (1.20-1ubuntu0.1) over (1.20-1) ... | |
Progress: [ 26%] [###############...........................................] Preparing to unpack .../09-libbpf0_1%3a0.8.0-1ubuntu22.10.1_arm64.deb ... | |
Unpacking libbpf0:arm64 (1:0.8.0-1ubuntu22.10.1) over (1:0.8.0-1) ... | |
Preparing to unpack .../10-libglib2.0-data_2.74.3-0ubuntu1_all.deb ... | |
Unpacking libglib2.0-data (2.74.3-0ubuntu1) over (2.74.0-3) ... | |
Progress: [ 27%] [###############...........................................] Preparing to unpack .../11-libglib2.0-bin_2.74.3-0ubuntu1_arm64.deb ... | |
Unpacking libglib2.0-bin (2.74.3-0ubuntu1) over (2.74.0-3) ... | |
Preparing to unpack .../12-libglib2.0-0_2.74.3-0ubuntu1_arm64.deb ... | |
Progress: [ 28%] [################..........................................] Unpacking libglib2.0-0:arm64 (2.74.3-0ubuntu1) over (2.74.0-3) ... | |
Preparing to unpack .../13-libxml2_2.9.14+dfsg-1ubuntu0.1_arm64.deb ... | |
Unpacking libxml2:arm64 (2.9.14+dfsg-1ubuntu0.1) over (2.9.14+dfsg-1) ... | |
Preparing to unpack .../14-openssl_3.0.5-2ubuntu2_arm64.deb ... | |
Progress: [ 29%] [################..........................................] Unpacking openssl (3.0.5-2ubuntu2) over (3.0.5-2ubuntu1) ... | |
Preparing to unpack .../15-python-apt-common_2.4.0+22.10_all.deb ... | |
Unpacking python-apt-common (2.4.0+22.10) over (2.3.0ubuntu2) ... | |
Progress: [ 30%] [#################.........................................] Preparing to unpack .../16-python3-apt_2.4.0+22.10_arm64.deb ... | |
Unpacking python3-apt (2.4.0+22.10) over (2.3.0ubuntu2) ... | |
Preparing to unpack .../17-python3-setuptools_59.6.0-1.2ubuntu0.22.10.1_all.deb ... | |
Progress: [ 31%] [#################.........................................] Unpacking python3-setuptools (59.6.0-1.2ubuntu0.22.10.1) over (59.6.0-1.2) ... | |
Preparing to unpack .../18-python3-pkg-resources_59.6.0-1.2ubuntu0.22.10.1_all.deb ... | |
Unpacking python3-pkg-resources (59.6.0-1.2ubuntu0.22.10.1) over (59.6.0-1.2) ... | |
Preparing to unpack .../19-sudo_1.9.11p3-1ubuntu1.1_arm64.deb ... | |
Progress: [ 32%] [##################........................................] Unpacking sudo (1.9.11p3-1ubuntu1.1) over (1.9.11p3-1ubuntu1) ... | |
Preparing to unpack .../20-systemd-hwe-hwdb_251.4.3_all.deb ... | |
Unpacking systemd-hwe-hwdb (251.4.3) over (251.2.1) ... | |
Progress: [ 33%] [###################.......................................] Preparing to unpack .../21-tzdata_2022g-0ubuntu0.22.10.1_all.deb ... | |
Unpacking tzdata (2022g-0ubuntu0.22.10.1) over (2022e-0ubuntu2) ... | |
Preparing to unpack .../22-bind9-host_1%3a9.18.4-2ubuntu2.1_arm64.deb ... | |
Unpacking bind9-host (1:9.18.4-2ubuntu2.1) over (1:9.18.4-2ubuntu2) ... | |
Progress: [ 34%] [###################.......................................] Preparing to unpack .../23-bind9-dnsutils_1%3a9.18.4-2ubuntu2.1_arm64.deb ... | |
Unpacking bind9-dnsutils (1:9.18.4-2ubuntu2.1) over (1:9.18.4-2ubuntu2) ... | |
Preparing to unpack .../24-bind9-libs_1%3a9.18.4-2ubuntu2.1_arm64.deb ... | |
Progress: [ 35%] [####################......................................] Unpacking bind9-libs:arm64 (1:9.18.4-2ubuntu2.1) over (1:9.18.4-2ubuntu2) ... | |
Preparing to unpack .../25-alsa-ucm-conf_1.2.6.3-1ubuntu3_all.deb ... | |
Unpacking alsa-ucm-conf (1.2.6.3-1ubuntu3) over (1.2.6.3-1ubuntu2) ... | |
Preparing to unpack .../26-libctf-nobfd0_2.39-3ubuntu1.1_arm64.deb ... | |
Progress: [ 36%] [#####################.....................................] Unpacking libctf-nobfd0:arm64 (2.39-3ubuntu1.1) over (2.39-3ubuntu1) ... | |
Preparing to unpack .../27-libgprofng0_2.39-3ubuntu1.1_arm64.deb ... | |
Unpacking libgprofng0:arm64 (2.39-3ubuntu1.1) over (2.39-3ubuntu1) ... | |
Progress: [ 37%] [#####################.....................................] Preparing to unpack .../28-libctf0_2.39-3ubuntu1.1_arm64.deb ... | |
Unpacking libctf0:arm64 (2.39-3ubuntu1.1) over (2.39-3ubuntu1) ... | |
Preparing to unpack .../29-binutils-aarch64-linux-gnu_2.39-3ubuntu1.1_arm64.deb ... | |
Unpacking binutils-aarch64-linux-gnu (2.39-3ubuntu1.1) over (2.39-3ubuntu1) ... | |
Progress: [ 38%] [######################....................................] Preparing to unpack .../30-libbinutils_2.39-3ubuntu1.1_arm64.deb ... | |
Unpacking libbinutils:arm64 (2.39-3ubuntu1.1) over (2.39-3ubuntu1) ... | |
Preparing to unpack .../31-binutils_2.39-3ubuntu1.1_arm64.deb ... | |
Progress: [ 39%] [######################....................................] Unpacking binutils (2.39-3ubuntu1.1) over (2.39-3ubuntu1) ... | |
Preparing to unpack .../32-binutils-common_2.39-3ubuntu1.1_arm64.deb ... | |
Unpacking binutils-common:arm64 (2.39-3ubuntu1.1) over (2.39-3ubuntu1) ... | |
Progress: [ 40%] [#######################...................................] Preparing to unpack .../33-curl_7.85.0-1ubuntu0.2_arm64.deb ... | |
Unpacking curl (7.85.0-1ubuntu0.2) over (7.85.0-1) ... | |
Preparing to unpack .../34-libcurl4_7.85.0-1ubuntu0.2_arm64.deb ... | |
Unpacking libcurl4:arm64 (7.85.0-1ubuntu0.2) over (7.85.0-1) ... | |
Progress: [ 41%] [#######################...................................] Preparing to unpack .../35-firmware-sof-signed_2.1.1-1ubuntu1.1_all.deb ... | |
Unpacking firmware-sof-signed (2.1.1-1ubuntu1.1) over (2.1.1-1ubuntu1) ... | |
Preparing to unpack .../36-libnautilus-extension4_1%3a43.0-1ubuntu2.1_arm64.deb ... | |
Progress: [ 42%] [########################..................................] Unpacking libnautilus-extension4:arm64 (1:43.0-1ubuntu2.1) over (1:43.0-1ubuntu1) ... | |
Preparing to unpack .../37-gir1.2-nautilus-4.0_1%3a43.0-1ubuntu2.1_arm64.deb ... | |
Unpacking gir1.2-nautilus-4.0:arm64 (1:43.0-1ubuntu2.1) over (1:43.0-1ubuntu1) ... | |
Preparing to unpack .../38-grub2-common_2.06-2ubuntu12.1_arm64.deb ... | |
Progress: [ 43%] [#########################.................................] Unpacking grub2-common (2.06-2ubuntu12.1) over (2.06-2ubuntu12) ... | |
Preparing to unpack .../39-grub-common_2.06-2ubuntu12.1_arm64.deb ... | |
Unpacking grub-common (2.06-2ubuntu12.1) over (2.06-2ubuntu12) ... | |
Progress: [ 44%] [#########################.................................] Preparing to unpack .../40-libksba8_1.6.0-3ubuntu1.1_arm64.deb ... | |
Unpacking libksba8:arm64 (1.6.0-3ubuntu1.1) over (1.6.0-3) ... | |
Preparing to unpack .../41-libxpm4_1%3a3.5.12-1ubuntu0.22.10.1_arm64.deb ... | |
Unpacking libxpm4:arm64 (1:3.5.12-1ubuntu0.22.10.1) over (1:3.5.12-1build2) ... | |
Progress: [ 45%] [##########################................................] Preparing to unpack .../42-linux-firmware_20220923.gitf09bebf3-0ubuntu1.3_all.deb ... | |
Unpacking linux-firmware (20220923.gitf09bebf3-0ubuntu1.3) over (20220923.gitf09bebf3-0ubuntu1.1) ... | |
Selecting previously unselected package linux-headers-6.0.19-02541-gd380b952927c. | |
Preparing to unpack .../43-linux-headers-6.0.19-02541-gd380b952927c_6.0.19-02541-gd380b952927c-1_arm64.deb ... | |
Progress: [ 46%] [##########################................................] Unpacking linux-headers-6.0.19-02541-gd380b952927c (6.0.19-02541-gd380b952927c-1) ... | |
Preparing to unpack .../44-linux-headers-lc-stable-arm64_6.0.19-02541-gd380b952927c-1_arm64.deb ... | |
Unpacking linux-headers-lc-stable-arm64 (6.0.19-02541-gd380b952927c-1) over (6.0.12-00858-gb98721ea4575-1) ... | |
Selecting previously unselected package linux-image-6.0.19-02541-gd380b952927c. | |
Preparing to unpack .../45-linux-image-6.0.19-02541-gd380b952927c_6.0.19-02541-gd380b952927c-1_arm64.deb ... | |
Progress: [ 47%] [###########################...............................] Unpacking linux-image-6.0.19-02541-gd380b952927c (6.0.19-02541-gd380b952927c-1) ... | |
Preparing to unpack .../46-linux-image-lc-stable-arm64_6.0.19-02541-gd380b952927c-1_arm64.deb ... | |
Unpacking linux-image-lc-stable-arm64 (6.0.19-02541-gd380b952927c-1) over (6.0.12-00858-gb98721ea4575-1) ... | |
Progress: [ 48%] [###########################...............................] Preparing to unpack .../47-linux-libc-dev_5.19.0-29.30_arm64.deb ... | |
Unpacking linux-libc-dev:arm64 (5.19.0-29.30) over (5.19.0-26.27) ... | |
Preparing to unpack .../48-snapd_2.57.5+22.10ubuntu0.1_arm64.deb ... | |
Unpacking snapd (2.57.5+22.10ubuntu0.1) over (2.57.4+22.10ubuntu1) ... | |
Progress: [ 49%] [############################..............................] Preparing to unpack .../49-sosreport_4.4-1ubuntu1.22.10.1_arm64.deb ... | |
Unpacking sosreport (4.4-1ubuntu1.22.10.1) over (4.4-1ubuntu0) ... | |
Preparing to unpack .../50-xserver-common_2%3a21.1.4-2ubuntu1.3_all.deb ... | |
Progress: [ 50%] [#############################.............................] Unpacking xserver-common (2:21.1.4-2ubuntu1.3) over (2:21.1.4-2ubuntu1.2) ... | |
Preparing to unpack .../51-xserver-xorg-legacy_2%3a21.1.4-2ubuntu1.3_arm64.deb ... | |
Unpacking xserver-xorg-legacy (2:21.1.4-2ubuntu1.3) over (2:21.1.4-2ubuntu1.2) ... | |
Progress: [ 51%] [#############################.............................] Preparing to unpack .../52-xserver-xorg-core_2%3a21.1.4-2ubuntu1.3_arm64.deb ... | |
Unpacking xserver-xorg-core (2:21.1.4-2ubuntu1.3) over (2:21.1.4-2ubuntu1.2) ... | |
Preparing to unpack .../53-xwayland_2%3a22.1.3-2ubuntu0.2_arm64.deb ... | |
Unpacking xwayland (2:22.1.3-2ubuntu0.2) over (2:22.1.3-2ubuntu0.1) ... | |
Progress: [ 52%] [##############################............................] Preparing to unpack .../54-cloud-init_22.4.2-0ubuntu0~22.10.1_all.deb ... | |
Unpacking cloud-init (22.4.2-0ubuntu0~22.10.1) over (22.3.4-0ubuntu1) ... | |
Preparing to unpack .../55-kpartx_0.8.8-1ubuntu1.22.10.1_arm64.deb ... | |
Progress: [ 53%] [##############################............................] Unpacking kpartx (0.8.8-1ubuntu1.22.10.1) over (0.8.8-1ubuntu1) ... | |
Preparing to unpack .../56-multipath-tools_0.8.8-1ubuntu1.22.10.1_arm64.deb ... | |
Unpacking multipath-tools (0.8.8-1ubuntu1.22.10.1) over (0.8.8-1ubuntu1) ... | |
Setting up python3-pkg-resources (59.6.0-1.2ubuntu0.22.10.1) ... | |
Progress: [ 54%] [###############################...........................] Setting up libksba8:arm64 (1.6.0-3ubuntu1.1) ... | |
Progress: [ 55%] [###############################...........................] Setting up libexpat1:arm64 (2.4.8-2ubuntu0.22.10.1) ... | |
Setting up linux-headers-6.0.19-02541-gd380b952927c (6.0.19-02541-gd380b952927c-1) ... | |
Progress: [ 56%] [################################..........................] Setting up cloud-init (22.4.2-0ubuntu0~22.10.1) ... | |
Installing new version of config file /etc/cloud/cloud.cfg ... | |
Setting up linux-image-6.0.19-02541-gd380b952927c (6.0.19-02541-gd380b952927c-1) ... | |
Progress: [ 57%] [#################################.........................] * dkms: running auto installation service for kernel 6.0.19-02541-gd380b952927c | |
[ OK ] | |
update-initramfs: Generating /boot/initrd.img-6.0.19-02541-gd380b952927c | |
Sourcing file `/etc/default/grub' | |
Sourcing file `/etc/default/grub.d/50-cloudimg-settings.cfg' | |
Sourcing file `/etc/default/grub.d/60-libre-computer-settings.cfg' | |
Sourcing file `/etc/default/grub.d/init-select.cfg' | |
Generating grub configuration file ... | |
Found linux image: /boot/vmlinuz-6.0.19-02541-gd380b952927c | |
Found initrd image: /boot/initrd.img-6.0.19-02541-gd380b952927c | |
Found linux image: /boot/vmlinuz-6.0.12-00858-gb98721ea4575 | |
Found initrd image: /boot/initrd.img-6.0.12-00858-gb98721ea4575 | |
Warning: os-prober will not be executed to detect other bootable partitions. | |
Systems on them will not be added to the GRUB boot configuration. | |
Check GRUB_DISABLE_OS_PROBER documentation entry. | |
done | |
Setting up python3-setuptools (59.6.0-1.2ubuntu0.22.10.1) ... | |
Setting up libxpm4:arm64 (1:3.5.12-1ubuntu0.22.10.1) ... | |
Progress: [ 58%] [#################################.........................] Setting up alsa-ucm-conf (1.2.6.3-1ubuntu3) ... | |
Progress: [ 59%] [##################################........................] Setting up linux-firmware (20220923.gitf09bebf3-0ubuntu1.3) ... | |
update-initramfs: Generating /boot/initrd.img-6.0.19-02541-gd380b952927c | |
update-initramfs: Generating /boot/initrd.img-6.0.12-00858-gb98721ea4575 | |
Setting up libglib2.0-0:arm64 (2.74.3-0ubuntu1) ... | |
Progress: [ 60%] [##################################........................] Setting up distro-info-data (0.54ubuntu0.1) ... | |
Setting up firmware-sof-signed (2.1.1-1ubuntu1.1) ... | |
Progress: [ 61%] [###################################.......................] Setting up binutils-common:arm64 (2.39-3ubuntu1.1) ... | |
Progress: [ 62%] [###################################.......................] Setting up libssl3:arm64 (3.0.5-2ubuntu2) ... | |
Setting up linux-libc-dev:arm64 (5.19.0-29.30) ... | |
Progress: [ 63%] [####################################......................] Setting up libctf-nobfd0:arm64 (2.39-3ubuntu1.1) ... | |
Setting up krb5-locales (1.20-1ubuntu0.1) ... | |
Progress: [ 64%] [#####################################.....................] Setting up libntfs-3g89 (1:2022.5.17-1ubuntu1.1) ... | |
Setting up perl-modules-5.34 (5.34.0-5ubuntu1.1) ... | |
Progress: [ 65%] [#####################################.....................] Setting up ntfs-3g (1:2022.5.17-1ubuntu1.1) ... | |
Progress: [ 66%] [######################################....................] Setting up libkrb5support0:arm64 (1.20-1ubuntu0.1) ... | |
Setting up tzdata (2022g-0ubuntu0.22.10.1) ... | |
Current default time zone: 'Etc/UTC' | |
Local time is now: Fri Jan 27 01:47:23 UTC 2023. | |
Universal Time is now: Fri Jan 27 01:47:23 UTC 2023. | |
Run 'dpkg-reconfigure tzdata' if you wish to change it. | |
Progress: [ 67%] [#######################################...................] Setting up grub-common (2.06-2ubuntu12.1) ... | |
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults | |
Setting up libglib2.0-data (2.74.3-0ubuntu1) ... | |
Progress: [ 68%] [#######################################...................] Setting up libdbus-1-3:arm64 (1.14.0-2ubuntu3) ... | |
Setting up libnautilus-extension4:arm64 (1:43.0-1ubuntu2.1) ... | |
Progress: [ 69%] [########################################..................] Setting up libpython3.10-minimal:arm64 (3.10.7-1ubuntu0.2) ... | |
Progress: [ 70%] [########################################..................] Setting up sudo (1.9.11p3-1ubuntu1.1) ... | |
Setting up libk5crypto3:arm64 (1.20-1ubuntu0.1) ... | |
Progress: [ 71%] [#########################################.................] Setting up sosreport (4.4-1ubuntu1.22.10.1) ... | |
Setting up systemd-hwe-hwdb (251.4.3) ... | |
Progress: [ 72%] [#########################################.................] Setting up python-apt-common (2.4.0+22.10) ... | |
Progress: [ 73%] [##########################################................] Setting up gir1.2-nautilus-4.0:arm64 (1:43.0-1ubuntu2.1) ... | |
Setting up dbus-session-bus-common (1.14.0-2ubuntu3) ... | |
Progress: [ 74%] [###########################################...............] Setting up kpartx (0.8.8-1ubuntu1.22.10.1) ... | |
Setting up git-man (1:2.37.2-1ubuntu1.2) ... | |
Progress: [ 75%] [###########################################...............] Setting up libkrb5-3:arm64 (1.20-1ubuntu0.1) ... | |
Setting up xserver-common (2:21.1.4-2ubuntu1.3) ... | |
Progress: [ 76%] [############################################..............] Setting up linux-headers-lc-stable-arm64 (6.0.19-02541-gd380b952927c-1) ... | |
Progress: [ 77%] [############################################..............] Setting up xwayland (2:22.1.3-2ubuntu0.2) ... | |
Setting up libbinutils:arm64 (2.39-3ubuntu1.1) ... | |
Progress: [ 78%] [#############################################.............] Setting up dbus-system-bus-common (1.14.0-2ubuntu3) ... | |
Setting up libbpf0:arm64 (1:0.8.0-1ubuntu22.10.1) ... | |
Progress: [ 79%] [#############################################.............] Setting up openssl (3.0.5-2ubuntu2) ... | |
Progress: [ 80%] [##############################################............] Setting up xserver-xorg-legacy (2:21.1.4-2ubuntu1.3) ... | |
setting xserver-xorg-legacy/xwrapper/allowed_users from configuration file | |
Setting up libxml2:arm64 (2.9.14+dfsg-1ubuntu0.1) ... | |
Progress: [ 81%] [###############################################...........] Setting up dbus-bin (1.14.0-2ubuntu3) ... | |
Setting up libctf0:arm64 (2.39-3ubuntu1.1) ... | |
Progress: [ 82%] [###############################################...........] Setting up linux-image-lc-stable-arm64 (6.0.19-02541-gd380b952927c-1) ... | |
Setting up libperl5.34:arm64 (5.34.0-5ubuntu1.1) ... | |
Progress: [ 83%] [################################################..........] Setting up grub2-common (2.06-2ubuntu12.1) ... | |
Progress: [ 84%] [################################################..........] Setting up python3-apt (2.4.0+22.10) ... | |
Setting up xserver-xorg-core (2:21.1.4-2ubuntu1.3) ... | |
Progress: [ 85%] [#################################################.........] Setting up libglib2.0-bin (2.74.3-0ubuntu1) ... | |
Setting up dbus-daemon (1.14.0-2ubuntu3) ... | |
Progress: [ 86%] [#################################################.........] Setting up python3.10-minimal (3.10.7-1ubuntu0.2) ... | |
Setting up multipath-tools (0.8.8-1ubuntu1.22.10.1) ... | |
Progress: [ 87%] [##################################################........] Could not execute systemctl: at /usr/bin/deb-systemd-invoke line 145. | |
Setting up libpython3.10-stdlib:arm64 (3.10.7-1ubuntu0.2) ... | |
Progress: [ 88%] [###################################################.......] Setting up dbus-user-session (1.14.0-2ubuntu3) ... | |
Setting up perl (5.34.0-5ubuntu1.1) ... | |
Progress: [ 89%] [###################################################.......] Setting up libgprofng0:arm64 (2.39-3ubuntu1.1) ... | |
Setting up dbus (1.14.0-2ubuntu3) ... | |
Progress: [ 90%] [####################################################......] A reboot is required to replace the running dbus-daemon. | |
Please reboot the system when convenient. | |
Setting up libgssapi-krb5-2:arm64 (1.20-1ubuntu0.1) ... | |
Progress: [ 91%] [####################################################......] Setting up libcurl4:arm64 (7.85.0-1ubuntu0.2) ... | |
Setting up curl (7.85.0-1ubuntu0.2) ... | |
Progress: [ 92%] [#####################################################.....] Setting up libpython3.10:arm64 (3.10.7-1ubuntu0.2) ... | |
Setting up python3.10 (3.10.7-1ubuntu0.2) ... | |
Progress: [ 93%] [#####################################################.....] Setting up bind9-libs:arm64 (1:9.18.4-2ubuntu2.1) ... | |
Setting up openssh-client (1:9.0p1-1ubuntu7.1) ... | |
Progress: [ 94%] [######################################################....] Setting up binutils-aarch64-linux-gnu (2.39-3ubuntu1.1) ... | |
Progress: [ 95%] [#######################################################...] Setting up libcurl3-gnutls:arm64 (7.85.0-1ubuntu0.2) ... | |
Setting up binutils (2.39-3ubuntu1.1) ... | |
Progress: [ 96%] [#######################################################...] Setting up git (1:2.37.2-1ubuntu1.2) ... | |
Setting up bind9-host (1:9.18.4-2ubuntu2.1) ... | |
Progress: [ 97%] [########################################################..] Setting up snapd (2.57.5+22.10ubuntu0.1) ... | |
Installing new version of config file /etc/apparmor.d/usr.lib.snapd.snap-confine.real ... | |
Created symlink /etc/systemd/system/multi-user.target.wants/snapd.aa-prompt-listener.service /lib/systemd/system/snapd.aa-prompt-listener.service. | |
snapd.failure.service is a disabled or a static unit not running, not starting it. | |
snapd.snap-repair.service is a disabled or a static unit not running, not starting it. | |
Setting up openssh-sftp-server (1:9.0p1-1ubuntu7.1) ... | |
Progress: [ 98%] [########################################################..] Setting up openssh-server (1:9.0p1-1ubuntu7.1) ... | |
rescue-ssh.target is a disabled or a static unit not running, not starting it. | |
Progress: [ 99%] [#########################################################.] Setting up bind9-dnsutils (1:9.18.4-2ubuntu2.1) ... | |
Processing triggers for initramfs-tools (0.140ubuntu17) ... | |
update-initramfs: Generating /boot/initrd.img-6.0.19-02541-gd380b952927c | |
Processing triggers for libc-bin (2.36-0ubuntu4) ... | |
Processing triggers for rsyslog (8.2208.0-1ubuntu2) ... | |
Processing triggers for ufw (0.36.1-4build1) ... | |
Processing triggers for man-db (2.10.2-2) ... | |
Processing triggers for udev (251.4-1ubuntu7) ... | |
Processing triggers for install-info (6.8-6) ... | |
ubuntu@potato:~$ sudo apt upgradedateshutdown -r now | |
ubuntu@potato:~$ | |
[ OK ] Stopped LSB: rng-tools (Debian variant). | |
[ OK ] Started Show Plymouth Reboot Screen. | |
[ OK ] Stopped User Manager for UID 1000. | |
plymouth-reboot.service | |
Stopping User Runtime Directory /run/user/1000... | |
[ OK ] Unmounted /run/user/1000. | |
[ OK ] Stopped Load/Save Random Seed. | |
[ OK ] Stopped User Runtime Directory /run/user/1000. | |
[ OK ] Removed slice User Slice of UID 1000. | |
Stopping Permit User Sessions... | |
[ OK ] Stopped Permit User Sessions. | |
[ OK ] Stopped User Login Management. | |
[ OK ] Stopped target Network. | |
[ OK ] Stopped target Remote File Systems. | |
[ OK ] Stopped target Preparation for Remote File Systems. | |
Stopping WPA supplicant... | |
[ OK ] Stopped WPA supplicant. | |
[ OK ] Stopped target Basic System. | |
[ OK ] Stopped Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Stopped target Path Units. | |
[ OK ] Stopped target Slice Units. | |
[ OK ] Removed slice User and Session Slice. | |
[ OK ] Stopped target Socket Units. | |
[ OK ] Closed cloud-init hotplug hook socket. | |
[ OK ] Closed Open-iSCSI iscsid Socket. | |
[ OK ] Closed Socket unix for snap application lxd.daemon. | |
[ OK ] Closed Socket unix for snap application lxd.user-daemon. | |
[ OK ] Closed Socket activation for snappy daemon. | |
[ OK ] Closed OpenBSD Secure Shell server socket. | |
[ OK ] Closed Syslog Socket. | |
[ OK ] Closed UUID daemon activation socket. | |
[ OK ] Stopped target System Initialization. | |
[ OK ] Unset automount Arbitrary s File System Automount Point. | |
[ OK ] Stopped target Local Encrypted Volumes. | |
[ OK ] Stopped Forward Password Ruests to Wall Directory Watch. | |
[ OK ] Stopped target Local Integrity Protected Volumes. | |
[ OK ] Stopped target Local Verity Protected Volumes. | |
[ OK ] Stopped Initial cloud-initob (metadata service crawler). | |
[ OK ] Stopped Wait for Network to be Configured. | |
Stopping Network Configuration... | |
Stopping Network Name Resolution... | |
Stopping Network Time Synchronization... | |
Stopping Record System Boot/Shutdown in UTMP... | |
[ OK ] Stopped Network Name Resolution. | |
[ OK ] Stopped Network Time Synchronization. | |
[ OK ] Stopped Network Configuration. | |
[ OK ] Stopped Record System Boot/Shutdown in UTMP. | |
[ OK ] Stopped target Preparation for Network. | |
[ OK ] Closed Network Service Netlink Socket. | |
[ OK ] Stopped Initial cloud-init job (pre-networking). | |
[ OK ] Stopped Apply Kernel Variables. | |
[ OK ] Stopped Load Kernel Modules. | |
[ OK ] Stopped Create Volatile Files and Directories. | |
[ OK ] Stopped Create final runtime dir for shutdown pivot root. | |
[ OK ] Stopped target Local File Systems. | |
Unmounting /boot/efi... | |
Unmounting /run/credentials/systemd-sysusers.service... | |
Unmounting /run/snapd/ns/lxd.mnt... | |
Unmounting Mount unit for core20, revision 1627... | |
Unmounting Mount unit for lxd, revision 23687... | |
Unmounting Mount unit for snapd, revision 17339... | |
[ OK ] Unmounted /boot/efi. | |
[ OK ] Unmounted /run/credentials/systemd-sysusers.service. | |
[ OK ] Unmounted /run/snapd/ns/lxd.mnt. | |
[ OK ] Unmounted Mount unit for core20, revision 1627. | |
[ OK ] Unmounted Mount unit for lxd, revision 23687. | |
[ OK ] Unmounted Mount unit for snapd, revision 17339. | |
Unmounting /run/snapd/ns... | |
[ OK ] Stopped File System Check dev/disk/by-label/system-boot. | |
[ OK ] Removed slice Slice /system/systemd-fsck. | |
[ OK ] Unmounted /run/snapd/ns. | |
[ OK ] Stopped target Preparation for Local File Systems. | |
[ OK ] Stopped target Swaps. | |
Deactivating swap /swapfile... | |
Stopping Monitoring of LVMmeventd or progress polling... | |
Stopping Device-Mapper Multipath Device Controller... | |
[ OK ] Stopped Create Static Device Nodes in /dev. | |
[ OK ] Stopped Create System Users. | |
[ OK ] Deactivated swap /swapfile. | |
[ OK ] Reached target Unmount All Filesystems. | |
[ OK ] Stopped Device-Mapper Multipath Device Controller. | |
[ OK ] Stopped Remount Root and Kernel File Systems. | |
[ OK ] Stopped Monitoring of LVM2 dmeventd or progress polling. | |
[ OK ] Reached target System Shutdown. | |
[ OK ] Reached target Late Shutdown Services. | |
[ OK ] Finished System Reboot. | |
[ OK ] Reached target System Reboot. | |
[ 568.115996] watchdog: watchdog0: watchdog did not stop! | |
[ 569.000202] watchdog: watchdog0: watchdog did not stop! | |
[ 570.409327] watchdog: watchdog0: watchdog did not stop! | |
[ 570.502477] reboot: Restarting system | |
bl31 reboot reason: 0xd | |
bl31 reboot reason: 0x0 | |
system cmd 1. | |
GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C;USB:0;SPI:0;CHK:A7;GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:0;READ:0;0.0;CHK:0; | |
no sdio debug board detected | |
TE: 1910697 | |
BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz | |
set vcck to 1120 mv | |
set vddee to 1000 mv | |
Board ID = 3 | |
CPU clk: 1200MHz | |
DQS-corr enabled | |
DDR scramble enabled | |
DDR3 chl: Rank0+1 @ 912MHz | |
bist_test rank: 0 1c 04 34 27 13 3c 17 00 2f 2e 19 44 18 00 30 2a 12 42 17 00 2f 2d 16 44 702 rank: 1 1b 06 31 27 12 3d 16 00 2d 2e 17 46 17 03 2c 29 13 3f 17 03 2c 2c 16 43 702 - PASS | |
Rank0: 1024MB(auto)-2T-13 | |
Rank1: 1024MB(auto)-2T-13 | |
AddrBus test pass! | |
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0 | |
New fip structure! | |
Load bl30 from SD, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0 | |
Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0 | |
Load bl33 from SD, src: 0x0004c200, des: 0x01000000, size: 0x00096a00, part: 0 | |
NOTICE: BL3-1: v1.0(release):53f813e | |
NOTICE: BL3-1: Built : 15:51:23, May 22 2019 | |
[BL31]: GXL CPU setup! | |
NOTICE: BL3-1: GXL normal boot! | |
NOTICE: BL3-1: BL33 decompress pass | |
mpu_config_enable:system pre init ok | |
dmc sec lock | |
[Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz] | |
OPS=0x85 | |
21 0e 85 00 59 17 cd 20 a3 4a 4a 10 e0 0f 05 28 | |
[2.520655 Inits done] | |
secure task start! | |
high task start! | |
low task start! | |
ERROR: Error initializing runtime service opteed_fast | |
<debug_uart> | |
U-Boot 2022.07+ (Nov 20 2022 - 18:31:28 -0500) Libre Computer Board AML-S905X-CC | |
Model: Libre Computer AML-S905X-CC | |
SoC: Amlogic Meson GXL (S905X) Revision 21:e (85:2) | |
DRAM: 2 GiB | |
Core: 177 devices, 29 uclasses, devicetree: separate | |
WDT: Not starting watchdog@98d0 | |
MMC: mmc@72000: 1, mmc@74000: 0 | |
Loading Environment from FAT... ** Bad device specification mmc 0 ** | |
** Bad device specification mmc 0 ** | |
Couldn't find partition mmc 0:1 | |
Error: could not access storage. | |
In: serial | |
Out: serial | |
Err: serial | |
[BL31]: tee size: 0 | |
Net: Fast Ethernet | |
[BL31]: tee size: 0 | |
Net: No ethernet found. | |
starting USB... | |
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2 | |
Register 2000140 NbrPorts 2 | |
Starting the controller | |
USB XHCI 1.00 | |
scanning bus usb@c9000000 for devices... 2 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Hit any key to stop autoboot: 1 0 | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
** Unable to read file ubootefi.var ** | |
Failed to load EFI variables | |
BootOrder not defined | |
EFI boot manager: Cannot load any image | |
Found EFI removable media binary efi/boot/bootaa64.efi | |
1890184 bytes read in 90 ms (20 MiB/s) | |
Booting /efi\boot\bootaa64.efi | |
EFI stub: Booting Linux Kernel... | |
EFI stub: Using DTB from configuration table | |
EFI stub: Exiting boot services... | |
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
[ 0.000000] Linux version 6.0.19-02541-gd380b952927c (autobuild@deb.libre.computer) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Sat Jan 21 06:14:42 UTC 2023 | |
[ 0.000000] Machine model: Libre Computer AML-S905X-CC | |
[ 0.000000] efi: EFI v2.90 by Das U-Boot | |
[ 0.000000] efi: ESRT=0x7ae51040 RTPROP=0x7ae53040 SMBIOS=0x7ae55000 RNG=0x57df0040 MEMRESERVE=0x57def040 | |
[ 0.000000] random: crng init done | |
[ 0.000000] esrt: Reserving ESRT space from 0x000000007ae51040 to 0x000000007ae51078. | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] DMA32 empty | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] | |
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] | |
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] | |
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] | |
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007ae52fff] | |
[ 0.000000] node 0: [mem 0x000000007ae53000-0x000000007ae53fff] | |
[ 0.000000] node 0: [mem 0x000000007ae54000-0x000000007ae54fff] | |
[ 0.000000] node 0: [mem 0x000000007ae55000-0x000000007ae57fff] | |
[ 0.000000] node 0: [mem 0x000000007ae58000-0x000000007ae58fff] | |
[ 0.000000] node 0: [mem 0x000000007ae59000-0x000000007ae5cfff] | |
[ 0.000000] node 0: [mem 0x000000007ae5d000-0x000000007de7ffff] | |
[ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff] | |
[ 0.000000] node 0: [mem 0x000000007de90000-0x000000007fe5afff] | |
[ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv0.2 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: Trusted OS migration not required | |
[ 0.000000] percpu: Embedded 20 pages/cpu s43240 r8192 d30488 u81920 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
[ 0.000000] CPU features: detected: ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.19-02541-gd380b952927c root=UUID=672a0911-0909-4a3e-bb4a-772b26b8b543 ro noquiet splash vt.handoff=7 | |
[ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.0.19-02541-gd380b952927c", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 1683024K/2097152K available (15232K kernel code, 1946K rwdata, 6152K rodata, 3712K init, 781K bss, 151984K reserved, 262144K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] Dynamic Preempt: full | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU event tracing is enabled. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
[ 0.000000] Trampoline variant of Tasks RCU enabled. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.000639] Console: colour dummy device 80x25 | |
[ 0.001158] printk: console [tty0] enabled | |
[ 0.001198] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
[ 0.001222] pid_max: default: 32768 minimum: 301 | |
[ 0.001285] LSM: Security Framework initializing | |
[ 0.001312] Yama: becoming mindful. | |
[ 0.001431] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.001458] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.002775] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.002817] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.002892] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.003029] rcu: Hierarchical SRCU implementation. | |
[ 0.003043] rcu: Max phase no-delay instances is 1000. | |
[ 0.004273] Remapping and enabling EFI services. | |
[ 0.004634] smp: Bringing up secondary CPUs ... | |
[ 0.005148] Detected VIPT I-cache on CPU1 | |
[ 0.005279] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
[ 0.005867] Detected VIPT I-cache on CPU2 | |
[ 0.005988] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
[ 0.006550] Detected VIPT I-cache on CPU3 | |
[ 0.006672] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
[ 0.006759] smp: Brought up 1 node, 4 CPUs | |
[ 0.006829] SMP: Total of 4 processors activated. | |
[ 0.006842] CPU features: detected: 32-bit EL0 Support | |
[ 0.006852] CPU features: detected: 32-bit EL1 Support | |
[ 0.006865] CPU features: detected: CRC32 instructions | |
[ 0.007337] CPU: All CPU(s) started at EL2 | |
[ 0.007376] alternatives: patching kernel code | |
[ 0.008799] devtmpfs: initialized | |
[ 0.014287] Registered cp15_barrier emulation handler | |
[ 0.014328] Registered setend emulation handler | |
[ 0.014509] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.014544] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.021364] pinctrl core: initialized pinctrl subsystem | |
[ 0.021911] SMBIOS 3.0 present. | |
[ 0.021941] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022 | |
[ 0.022391] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.023478] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.023783] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
[ 0.023949] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.024040] audit: initializing netlink subsys (disabled) | |
[ 0.024247] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
[ 0.025462] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.025477] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.025499] thermal_sys: Registered thermal governor 'power_allocator' | |
[ 0.025761] cpuidle: using governor menu | |
[ 0.025951] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.026067] ASID allocator initialised with 32768 entries | |
[ 0.038668] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039963] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.040402] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx | |
[ 0.042526] KASLR enabled | |
[ 0.049372] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
[ 0.049407] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page | |
[ 0.049422] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
[ 0.049435] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page | |
[ 0.049448] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
[ 0.049460] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page | |
[ 0.049474] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
[ 0.049486] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
[ 0.116589] raid6: neonx8 gen() 2143 MB/s | |
[ 0.184667] raid6: neonx4 gen() 2200 MB/s | |
[ 0.252742] raid6: neonx2 gen() 2088 MB/s | |
[ 0.320822] raid6: neonx1 gen() 1811 MB/s | |
[ 0.388889] raid6: int64x8 gen() 1491 MB/s | |
[ 0.456960] raid6: int64x4 gen() 1635 MB/s | |
[ 0.525039] raid6: int64x2 gen() 1415 MB/s | |
[ 0.593110] raid6: int64x1 gen() 1055 MB/s | |
[ 0.593123] raid6: using algorithm neonx4 gen() 2200 MB/s | |
[ 0.661165] raid6: .... xor() 1584 MB/s, rmw enabled | |
[ 0.661177] raid6: using neon recovery algorithm | |
[ 0.661377] fbcon: Taking over console | |
[ 0.662754] iommu: Default domain type: Passthrough | |
[ 0.663101] SCSI subsystem initialized | |
[ 0.663489] usbcore: registered new interface driver usbfs | |
[ 0.663537] usbcore: registered new interface driver hub | |
[ 0.663579] usbcore: registered new device driver usb | |
[ 0.663999] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.664013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.664039] PTP clock support registered | |
[ 0.664163] EDAC MC: Ver: 3.0.0 | |
[ 0.664692] Registered efivars operations | |
[ 0.665062] FPGA manager framework | |
[ 0.665213] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.665793] NetLabel: Initializing | |
[ 0.665807] NetLabel: domain hash size = 128 | |
[ 0.665818] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ 0.665878] NetLabel: unlabeled traffic allowed by default | |
[ 0.666322] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.666538] VFS: Disk quotas dquot_6.6.0 | |
[ 0.666600] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 0.666738] FS-Cache: Loaded | |
[ 0.672134] NET: Registered PF_INET protocol family | |
[ 0.672316] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.673971] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
[ 0.674070] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.674100] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
[ 0.674220] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
[ 0.674462] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 0.674699] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) | |
[ 0.674781] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.674834] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.675009] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.675450] RPC: Registered named UNIX socket transport module. | |
[ 0.675484] RPC: Registered udp transport module. | |
[ 0.675495] RPC: Registered tcp transport module. | |
[ 0.675504] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.675522] NET: Registered PF_XDP protocol family | |
[ 0.675543] PCI: CLS 0 bytes, default 64 | |
[ 0.675745] Trying to unpack rootfs image as initramfs... | |
[ 0.687107] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
[ 0.687674] kvm [1]: IPA Size Limit: 40 bits | |
[ 0.689026] kvm [1]: vgic interrupt IRQ9 | |
[ 0.689161] kvm [1]: Hyp mode initialized successfully | |
[ 0.690694] Initialise system trusted keyrings | |
[ 0.690963] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
[ 0.696839] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.697509] NFS: Registering the id_resolver key type | |
[ 0.697564] Key type id_resolver registered | |
[ 0.697576] Key type id_legacy registered | |
[ 0.697662] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.697680] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 0.698543] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled | |
[ 0.699947] 9p: Installing v9fs 9p2000 file system support | |
[ 0.736663] xor: measuring software checksum speed | |
[ 0.740767] 8regs : 2442 MB/sec | |
[ 0.744729] 32regs : 2522 MB/sec | |
[ 0.748892] arm64_neon : 2406 MB/sec | |
[ 0.748928] xor: using function: 32regs (2522 MB/sec) | |
[ 0.748951] Key type asymmetric registered | |
[ 0.748964] Asymmetric key parser 'x509' registered | |
[ 0.955162] Freeing initrd memory: 27364K | |
[ 0.968722] alg: self-tests for CTR-KDF (hmac(sha256)) passed | |
[ 0.968834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
[ 0.968957] io scheduler mq-deadline registered | |
[ 0.968974] io scheduler kyber registered | |
[ 0.969025] io scheduler bfq registered | |
[ 0.969810] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized | |
[ 0.986206] soc soc0: Amlogic Meson GXL (S905X) Revision 21:e (85:2) Detected | |
[ 0.990494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.998688] loop: module loaded | |
[ 1.002122] tun: Universal TUN/TAP device driver, 1.6 | |
[ 1.003235] VFIO - User Level meta-driver version: 0.3 | |
[ 1.004439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.004472] ehci-pci: EHCI PCI platform driver | |
[ 1.004519] ehci-platform: EHCI generic platform driver | |
[ 1.004644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 1.004682] ohci-pci: OHCI PCI platform driver | |
[ 1.004725] ohci-platform: OHCI generic platform driver | |
[ 1.005121] usbcore: registered new interface driver usb-storage | |
[ 1.005875] i2c_dev: i2c /dev entries driver | |
[ 1.009800] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.009835] sdhci: Copyright(c) Pierre Ossman | |
[ 1.010236] Synopsys Designware Multimedia Card Interface Driver | |
[ 1.010853] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.011952] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 1.012949] meson-sm: secure-monitor enabled | |
[ 1.013536] hid: raw HID events driver (C) Jiri Kosina | |
[ 1.013662] usbcore: registered new interface driver usbhid | |
[ 1.013676] usbhid: USB HID core driver | |
[ 1.014036] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered | |
[ 1.017891] NET: Registered PF_PACKET protocol family | |
[ 1.018192] 9pnet: Installing 9P2000 support | |
[ 1.018290] Key type dns_resolver registered | |
[ 1.018738] registered taskstats version 1 | |
[ 1.018774] Loading compiled-in X.509 certificates | |
[ 1.021051] zswap: loaded using pool zstd/z3fold | |
[ 1.021607] Key type .fscrypt registered | |
[ 1.021637] Key type fscrypt-provisioning registered | |
[ 1.022553] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes | |
[ 1.042807] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart | |
[ 2.370797] printk: console [ttyAML0] enabled | |
[ 2.380538] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq | |
[ 2.381414] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware | |
domain-0 init dvfs: 4 | |
[ 2.403976] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 | |
[ 2.404016] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 | |
[ 2.419829] meson-gx-mmc d0074000.mmc: no support for card's volts | |
[ 2.420380] mmc0: error -22 whilst initialising SDIO card | |
[ 2.945479] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator | |
[ 2.947169] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator | |
[ 2.954462] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM | |
[ 2.964459] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 2.966622] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
[ 2.974207] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports | |
[ 2.980021] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 | |
[ 2.989371] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000 | |
[ 2.995464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 | |
[ 3.003396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.010611] usb usb1: Product: xHCI Host Controller | |
[ 3.015376] usb usb1: Manufacturer: Linux 6.0.19-02541-gd380b952927c xhci-hcd | |
[ 3.022450] usb usb1: SerialNumber: xhci-hcd.0.auto | |
[ 3.027717] hub 1-0:1.0: USB hub found | |
[ 3.031026] hub 1-0:1.0: 2 ports detected | |
[ 3.037599] meson-gx-mmc d0072000.mmc: Got CD GPIO | |
[ 3.038123] of_cfs_init | |
[ 3.042200] of_cfs_init: OK | |
[ 3.045163] ALSA device list: | |
[ 3.047831] No soundcards found. | |
[ 3.071651] Freeing unused kernel memory: 3712K | |
[ 3.071779] Run /init as init process | |
Loading, please wait... | |
Starting version 251.4-1ubuntu7 | |
[ 3.186450] mmc1: new ultra high speed SDR50 SDXC card at address aaaa | |
[ 3.188073] mmcblk1: mmc1:aaaa SN64G 59.5 GiB | |
[ 3.194047] mmcblk1: p1 p2 | |
[ 3.290388] usb 1-1: new high-speed USB device number 2 using xhci-hcd | |
[ 3.344033] BTRFS: device label writable devid 1 transid 474 /dev/mmcblk1p2 scanned by systemd-udevd (181) | |
[ 3.439953] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 | |
[ 3.442562] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 3.449682] usb 1-1: Product: USB2.0 Hub | |
[ 3.509692] [drm] Initialized simpledrm 1.0.0 20200625 for 7fe5b000.framebuffer on minor 0 | |
[ 3.516559] hub 1-1:1.0: USB hub found | |
[ 3.516983] hub 1-1:1.0: 4 ports detected | |
[ 3.517312] Console: switching to colour frame buffer device 90x36 | |
[ 3.526509] mmc0: Card stuck being busy! __mmc_poll_for_busy | |
[ 3.535813] simple-framebuffer 7fe5b000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device | |
[ 3.567460] simple-framebuffer simple-framebuffer.0: [drm] *ERROR* could not acquire memory range [mem 0x7fe5b000-0x7ffeffff flags 0x200]: error -16 | |
[ 3.575633] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16 | |
[ 3.662800] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 | |
[ 3.669988] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 | |
[ 3.677489] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 | |
[ 3.686587] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 | |
[ 3.691630] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.701688] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.710490] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found | |
[ 3.716002] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found | |
[ 3.722050] meson8b-dwmac c9410000.ethernet: PTP uses main clock | |
[ 3.731732] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 | |
[ 3.736951] meson8b-dwmac c9410000.ethernet: DWMAC1000 | |
[ 3.741702] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported | |
[ 3.749167] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported | |
[ 3.757561] meson8b-dwmac c9410000.ethernet: COE Type 2 | |
[ 3.761209] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported | |
[ 3.768172] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported | |
[ 3.779942] meson-drm d0100000.vpu: Queued 2 outputs on vpu | |
[ 3.784167] lima d00c0000.gpu: bus rate = 166666667 | |
[ 3.786250] meson8b-dwmac c9410000.ethernet: Normal descriptors | |
[ 3.787882] lima d00c0000.gpu: mod rate = 24000000 | |
[ 3.790802] meson8b-dwmac c9410000.ethernet: Ring mode enabled | |
[ 3.801210] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
[ 3.815702] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found | |
[ 3.843653] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 | |
[ 3.850738] Console: switching to colour dummy device 80x25 | |
[ 3.879756] Trying to free nonexistent resource <000000007fe5b000-000000007ffeffff> | |
[ 3.910432] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) | |
[ 3.915171] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver | |
[ 3.922827] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) | |
[ 3.931868] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 2 | |
[ 3.948559] Console: switching to colour frame buffer device 90x36 | |
[ 3.972860] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device | |
Begin: Loading essential drivers ... [ 5.340565] async_tx: api initialized (async) | |
done. | |
Begin: Running /scripts/init-premount ... done. | |
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems | |
done. | |
Begin: Will now check root file system ... fsck from util-linux 2.38 | |
[/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 | |
done. | |
[ 5.698467] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm | |
[ 5.701319] BTRFS info (device mmcblk1p2): disk space caching is enabled | |
[ 5.720279] BTRFS info (device mmcblk1p2): enabling ssd optimizations | |
done. | |
Begin: Running /scripts/local-bottom ... done. | |
Begin: Running /scripts/init-bottom ... done. | |
[ 6.379323] systemd[1]: System time before build time, advancing clock. | |
[ 6.452328] NET: Registered PF_INET6 protocol family | |
[ 6.477049] Segment Routing with IPv6 | |
[ 6.477169] RPL Segment Routing with IPv6 | |
[ 6.479223] In-situ OAM (IOAM) with IPv6 | |
[ 6.557242] systemd[1]: systemd 251.4-1ubuntu7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
[ 6.584927] systemd[1]: Detected architecture arm64. | |
Welcome to Ubuntu 22.10! | |
[ 6.595110] systemd[1]: Hostname set to <potato>. | |
-.mount | |
[ 7.451203] systemd[1]: Queued start job for default target Graphical Interface. | |
[ 7.538488] systemd[1]: Created slice Slice /system/modprobe. | |
[ 7.541260] systemd[1]: Created slice Slice /system/serial-getty. | |
2m [ 7.547771] systemd[1]: Created slice Slice /system/systemd-fsck. | |
OK ] Created slice systemd[1]: Created slice User and Session Slice. | |
[0;1;39mSlice /system/modprobe 7.562696] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
0m. | |
[ OK ] Created[ 7.573639] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
slice Slice /system/serial-getty. | |
[ OK ] Created slice systemd[1]: Reached target Local Integrity Protected Volumes. | |
[0;1;39mSlice /system/systemd-fsck. | |
[ OK ] Cre[ 7.599070] systemd[1]: Reached target Slice Units. | |
ated slice User and Session Slice. | |
[ OK systemd[1]: Reached target Local Verity Protected Volumes. | |
[0m] Started Forward Pas[ 7.621874] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
sword Ruests to Wall Dire[ 7.632267] systemd[1]: Listening on LVM2 poll daemon socket. | |
ctory Watch. | |
[ [ 7.640220] systemd[1]: Listening on multipathd control socket. | |
OK ] Set up automoun[ 7.648125] systemd[1]: Listening on Syslog Socket. | |
t Arbitrarys[ 7.653923] systemd[1]: Listening on fsck to fsckd communication Socket. | |
File System Automount P[ 7.662385] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
oint. | |
[ OK[ 7.671522] systemd[1]: Listening on Journal Audit Socket. | |
] Reached target 7.678710] systemd[1]: Listening on Journal Socket (/dev/log). | |
0;1;39mLocal Integrity Pr[ 7.686913] systemd[1]: Listening on Journal Socket. | |
otected Volumes. | |
[ systemd[1]: Listening on Network Service Netlink Socket. | |
[0;32m OK ] Reached[ 7.703648] systemd[1]: Listening on udev Control Socket. | |
target Slice Un[ 7.709694] systemd[1]: Listening on udev Kernel Socket. | |
its. | |
[ OK ] Reached target Local Verity Protected Volumes. | |
[ OK ] Listening on Device-mapper event daemon FIFOs. | |
[ OK ] Listening on LVM2 poll daemon socket. | |
[ OK ] Listening on multipathd control socket. | |
[ OK ] Listening on Syslog Socket. | |
[ OK ] Li[ 7.750738] systemd[1]: Mounting Huge Pages File System... | |
stening on fsck to fsckd communication Socket.[ 7.761368] systemd[1]: Mounting POSIX Message Queue File System... | |
[ OK ] Listening on initctl Compatibilit[ 7.773590] systemd[1]: Mounting Kernel Debug File System... | |
y Named Pipe. | |
[ OK ] Listening on Journa[ 7.781100] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
l Audit Socket. | |
[ OK ] Listening on Journal Socket[ 7.802628] systemd[1]: Starting Journal Service... | |
(/dev/log). | |
[ OK ] Listening on Journal Socket. | |
[ OK [ 7.817533] systemd[1]: Starting Set the console keyboard layout... | |
] Listening on Network Service Netlink Socket[ 7.829599] systemd[1]: Starting Create List of Static Device Nodes... | |
. | |
[ OK ] Listening on udev Control Socket. | |
[ OK systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
[0m] Listening on udev Kernel Socket. | |
Mounting H[ 7.855924] systemd[1]: LXD - agent was skipped because of a failed condition check (ConditionPathExists=/dev/virtio-ports/org.linuxcontainers.lxd). | |
[ 7.861309] systemd[1]: Starting Load Kernel Module chromeos_pstore... | |
uge Pages File System... | |
Mounting POSIX Message Queue File System... | |
Mounting 7.890643] systemd[1]: Starting Load Kernel Module configfs... | |
0;1;39mKernel Debug File System... | |
Starting Journal Service... | |
[ 7.902864] systemd[1]: Starting Load Kernel Module drm... | |
Starting Set the console keyboard layout... | |
[ 7.915514] systemd[1]: Starting Load Kernel Module efi_pstore... | |
Starting Create List of Static Device Nodes[ 7.927497] systemd[1]: Starting Load Kernel Module fuse... | |
... | |
Starting Monitoring of LVMmeventd or progress polling... | |
Starting Load Ke[ 7.942505] systemd[1]: Starting Load Kernel Module pstore_blk... | |
rnel Module chromeos_pstore... | |
Starting Load Kernel Module configfs... | |
Starting 7.959159] fuse: init (API version 7.36) | |
;39mLoad Kernel Module drm... | |
Starting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module fuse... | |
Starting Loa[ 7.980808] systemd[1]: Starting Load Kernel Module pstore_zone... | |
d Kernel Module pstore_blk... | |
Starting Load Kernel Module pstore_zone... | |
[ 7.994283] systemd[1]: Starting Load Kernel Module ramoops... | |
Starting Load Kernel Module ramoops... | |
[ 8.008558] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of a failed condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). | |
[ 8.023974] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
[ 8.083024] systemd[1]: Starting Load Kernel Modules... | |
Starting Load Kernel Modules... | |
[ 8.093173] systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting Remount Root and Kernel File System[ 8.099998] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. | |
s... | |
[ 8.109091] Asymmetric key parser 'pkcs8' registered | |
[ 8.120921] systemd[1]: Starting Coldplug All udev Devices... | |
[ 8.121516] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3 | |
Starting Coldplug All udev Devices... | |
[ 8.141659] systemd[1]: Started Journal Service. | |
[ OK ] Started Journal Service. | |
systemd-journald.service | |
[ OK ] Mounted Huge Pages File System. | |
[ OK ] Mounted POSIX Message Queue File System. | |
dev-hugepages.mount | |
[ OK ] Mounted Kernel Debug File System. | |
[ OK ] Finished Set the console keyboard layout. | |
[ OK ] Finished Create List of Static Device Nodes. | |
dev-mqueue.mount | |
[ OK ] Finished Monitoring of LVM dmeventd or progress polling. | |
sys-kernel-debug.mount | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module configfs. | |
keyboard-setup.service | |
[ OK ] Finished Load Kernel Module drm. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
kmod-static-nodes.service | |
[ OK ] Finished Load Kernel Module fuse. | |
lvm2-monitor.service | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ OK ] Finished Load Kernel Modules. | |
systemd-modules-load.service | |
[ OK ] Finished Remount Root and Kernel File Systems. | |
systemd-remount-fs.service | |
Mounting FUSE Control File System... | |
Mounting Kernel Configuration File System... | |
Starting Device-Mapper Multipath Device Controller... | |
[ 8.289009] alua: device handler registered | |
Starting Flush Journal to Persistent Storage... | |
Starting Load/Save Random Seed.[ 8.303079] emc: device handler registered | |
.. | |
Starti[ 8.308731] systemd-journald[392]: Received client request to flush runtime journal. | |
ng Apply Kernel Variables... | |
Starting Create System Users... | |
run-credentials-syst[ 8.325081] rdac: device handler registered | |
emd\x2dsysusers.service.mount | |
[ OK ] Mounted FUSE Control File System. | |
[ OK ] Mounted Kernel Configuration File System. | |
sys-fs-fuse-connections.mount | |
sys-kernel-config.mount | |
[ 8.450012] systemd-journald[392]: File /var/log/journal/3dc7088238283ab098a6590663982acf/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
[ OK ] Finished Coldplug All udev Devices. | |
systemd-udev-trigger.service | |
[ OK ] Finished Apply Kernel Variables. | |
systemd-sysctl.service | |
[ OK ] Finished Load/Save Random Seed. | |
systemd-random-seed.service | |
[ OK ] Finished Create System Users. | |
systemd-sysusers.service | |
Starting Create Static Device Nodes in /dev... | |
[ OK ] Finished Flush Journal to Persistent Storage. | |
[ OK ] Finished Create Static Device Nodes in /dev. | |
systemd-journal-flush.service | |
systemd-tmpfiles-setup-dev.service | |
Starting Rule-based Managefor Device Events and Files... | |
[ OK ] Started Device-Mapper Multipath Device Controller. | |
multipathd.service | |
[ OK ] Reached target Preparation for Local File Systems. | |
Mounting Mount unit for core20, revision 1627... | |
Mounting Mount unit for lxd, revision 23687... | |
Mounting Mount unit for snapd, revision 17339... | |
[ OK ] Mounted Mount unit for core20, revision 1627. | |
snap-core20-1627.mount | |
[ OK ] Mounted Mount unit for lxd, revision 23687. | |
[ OK ] Mounted Mount unit for snapd, revision 17339. | |
snap-lxd-23687.mount | |
snap-snapd-17339.mount | |
[ OK ] Started Rule-based Manager for Device Events and Files. | |
systemd-udevd.service | |
Starting Show Plymouth Boot Screen... | |
plymouth-start.service | |
[ OK ] Started Show Plymouth Boot Screen. | |
[ OK ] Started Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Reached target Local Encrypted Volumes. | |
[ OK ] Found device /dev/ttyAML0. | |
[ OK ] Found device /dev/disk/by-label/system-boot. | |
Starting File System Checkv/disk/by-label/system-boot... | |
[ OK ] Started File System Check Daemon to report status. | |
systemd-fsckd.service | |
systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service | |
[ OK ] Finished File System Checkdev/disk/by-label/system-boot. | |
[BL31]: tee size: 0 | |
Mounting /boot/efi... | |
[ OK ] Mounted /boot/efi. | |
[ OK ] Reached target Local File Systems. | |
boot-efi.mount | |
Starting Set console font and keymap... | |
Starting Create final runtdir for shutdown pivot root... | |
Starting Tell Plymouth To Write Out Runtime Data... | |
Starting Create Volatile Files and Directories... | |
Starting Uncomplicated firewall... | |
[ OK ] Finished Set console font and keymap. | |
console-setup.service | |
[ OK ] Finished Create final runte dir for shutdown pivot root. | |
finalrd.service | |
[ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
plymouth-read-write.service | |
ufw.service | |
[ OK ] Finished Uncomplicated firewall. | |
[ OK ] Finished Create Volatile Files and Directories. | |
systemd-tmpfiles-setup.service | |
Starting Network Name Resolution... | |
Starting Network Time Synchronization... | |
Starting Record System Boot/Shutdown in UTMP... | |
Starting Initial cloud-init job (pre-networking)... | |
[ OK ] Finished Record System Boot/Shutdown in UTMP. | |
systemd-update-utmp.service | |
[ OK ] Reached target Hardware activated USB gadget. | |
systemd-timesyncd.service | |
[ OK ] Started Network Time Synchronization. | |
[ OK ] Reached target System Time Set. | |
[ OK ] Started Network Name Resolution. | |
systemd-resolved.service | |
[ OK ] Reached target Host and Network Name Lookups. | |
Starting Load Kernel Module chromeos_pstore... | |
Starting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module pstore_blk... | |
Starting Load Kernel Module pstore_zone... | |
Starting Load Kernel Module ramoops... | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ 13.493471] cloud-init[591]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'init-local' at Fri, 27 Jan 2023 01:49:18 +0000. Up 13.32 seconds. | |
[ OK ] Finished Initial cloud-init job (pre-networking). | |
cloud-init-local.service | |
[ OK ] Reached target Preparation for Network. | |
Starting Network Configuration... | |
[ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. | |
[ OK ] Started Network Configuration. | |
systemd-networkd.service | |
Starting Wait for Network to be Configured... | |
[ OK ] Finished Wait for Network to be Configured. | |
systemd-networkd-wait-online.service | |
Starting Initial cloud-ini (metadata service crawler)... | |
[ 33.478419] cloud-init[641]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'init' at Fri, 27 Jan 2023 01:50:42 +0000. Up 33.30 seconds. | |
[ 33.554903] cloud-init[641]: ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++ | |
[ 33.555329] cloud-init[641]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.557544] cloud-init[641]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address | | |
[ 33.559298] cloud-init[641]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.561516] cloud-init[641]: ci-info: | eth0 | True | 192.168.86.204 | 255.255.255.0 | global | d6:42:f4:77:0d:f6 | | |
[ 33.563431] cloud-init[641]: ci-info: | eth0 | True | fe80::d442:f4ff:fe77:df6/64 | . | link | d6:42:f4:77:0d:f6 | | |
[ 33.565362] cloud-init[641]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . | | |
[ 33.567207] cloud-init[641]: ci-info: | lo | True | ::1/128 | . | host | . | | |
[ 33.569604] cloud-init[641]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.571518] cloud-init[641]: ci-info: ++++++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++++ | |
[ 33.573716] cloud-init[641]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.575693] cloud-init[641]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags | | |
[ 33.578020] cloud-init[641]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.579969] cloud-init[641]: ci-info: | 0 | 0.0.0.0 | 192.168.86.1 | 0.0.0.0 | eth0 | UG | | |
[ 33.582664] cloud-init[641]: ci-info: | 1 | 192.168.86.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U | | |
[ 33.584626] cloud-init[641]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.586905] cloud-init[641]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++ | |
[ 33.588883] cloud-init[641]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 33.591017] cloud-init[641]: ci-info: | Route | Destination | Gateway | Interface | Flags | | |
[ 33.593112] cloud-init[641]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 33.595276] cloud-init[641]: ci-info: | 1 | fe80::/64 | :: | eth0 | U | | |
[ 33.597473] cloud-init[641]: ci-info: | 3 | local | :: | eth0 | U | | |
[ 33.599826] cloud-init[641]: ci-info: | 4 | multicast | :: | eth0 | U | | |
[ 33.601928] cloud-init[641]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ OK ] Finished Initial cloud-iniob (metadata service crawler). | |
[ OK ] Reached target Cloud-config availability. | |
cloud-init.service | |
Activating swap /swapfile... | |
[ OK ] Activated swap /swapfile. | |
[ OK ] Reached target Swaps. | |
[ OK ] Reached target System Initialization. | |
swapfile.swap | |
[ OK ] Started Daily apt download activities. | |
[ OK ] Started Daily apt upgrade and clean activities. | |
[ OK ] Started Daily dpkg database backup timer. | |
[ OK ] Started Periodic ext4 Onliata Check for All Filesystems. | |
[ OK ] Started Discard unused blocks once a week. | |
[ OK ] Started Daily rotation of log files. | |
[ OK ] Started Daily man-db regeneration. | |
[ OK ] Started Message of the Day. | |
[ OK ] Started Daily Cleanup of Temporary Directories. | |
[ OK ] Started Ubuntu Advantage Timer for running repeated jobs. | |
[ OK ] Reached target Path Units. | |
[ OK ] Listening on cloud-init hotplug hook socket. | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Listening on Open-iSCSI iscsid Socket. | |
[ OK ] Listening on Socket unix for snap application lxd.daemon. | |
[ OK ] Listening on Socket unix fp application lxd.user-daemon. | |
Starting Socket activation for snappy daemon... | |
[ OK ] Listening on OpenBSD Secure Shell server socket. | |
[ OK ] Listening on UUID daemon activation socket. | |
[ OK ] Listening on Socket activation for snappy daemon. | |
[ OK ] Reached target Socket Units. | |
[ OK ] Reached target Basic System. | |
Starting Save/Restore Sound Card State... | |
Starting D-Bus System Message Bus... | |
[ OK ] Started Save initial kernel messages after boot. | |
dmesg.service | |
Starting DUN service... | |
Starting Remove Stale Onlit4 Metadata Check Snapshots... | |
Starting Record successful boot for GRUB... | |
[ OK ] Started irqbalance daemon. | |
irqbalance.service | |
Starting Telephony service... | |
Starting System Logging Service... | |
[ OK ] Reached target Preparation for Logins. | |
Starting Snap Daemon... | |
Starting User Login Management... | |
[ OK ] Started D-Bus System Message Bus. | |
dbus.service | |
alsa-restore.service | |
[ OK ] Finished Save/Restore Sound Card State. | |
[ OK ] Reached target Sound Card. | |
Starting WPA supplicant... | |
[ OK ] Started DUN service. | |
dundee.service | |
[ OK ] Started Telephony service. | |
ofono.service | |
[ OK ] Finished Record successful boot for GRUB. | |
Starting GRUB failed boot detection... | |
Mounting Arbitrary Executable File Formats File System... | |
systemd-logind.service | |
[ OK ] Started User Login Management. | |
[ OK ] Mounted Arbitrary Executable File Formats File System. | |
proc-sys-fs-binfmt_misc.mount | |
wpa_supplicant.service | |
[ OK ] Started WPA supplicant. | |
[ OK ] Reached target Network. | |
[ OK ] Reached target Network is Online. | |
[ OK ] Started Download data for ailed at package install time. | |
[ OK ] Started Check to see whethw version of Ubuntu available. | |
[ OK ] Reached target Timer Units. | |
[ OK ] Reached target Preparation for Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
Starting LSB: automatic crash report generation... | |
[ OK ] Finished Availability of block devices. | |
blk-availability.service | |
[ OK ] Started Regular background program processing daemon. | |
cron.service | |
Starting LSB: rng-tools (Debian variant)... | |
Starting Service for snap application lxd.activate... | |
Starting Permit User Sessions... | |
[ OK ] Started Unattended Upgrades Shutdown. | |
unattended-upgrades.service | |
[ OK ] Started System Logging Service. | |
rsyslog.service | |
[ OK ] Finished Remove Stale Onliext4 Metadata Check Snapshots. | |
[ OK ] Finished GRUB failed boot detection. | |
[ OK ] Finished Permit User Sessions. | |
systemd-user-sessions.service | |
Starting Hold until boot process finishes up... | |
Starting Terminate Plymouth Boot Screen... | |
[ 38.047091] cloud-init[807]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'modules:config' at Fri, 27 Jan 2023 01:50:47 +0000. Up 37.71 seconds. | |
Ubuntu 22.10 potato ttyAML0 | |
potato login: [ 40.977825] cloud-init[832]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'modules:final' at Fri, 27 Jan 2023 01:50:50 +0000. Up 40.64 seconds. | |
[ 41.393759] cloud-init[832]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 finished at Fri, 27 Jan 2023 01:50:50 +0000. Datasource DataSourceNoCloud [seed=/dev/mmcblk1p1][dsmode=local]. Up 41.36 seconds | |
potato login: ubuntu | |
Password: | |
Welcome to Ubuntu 22.10 (GNU/Linux 6.0.19-02541-gd380b952927c aarch64) | |
* Documentation: https://help.ubuntu.com | |
* Management: https://landscape.canonical.com | |
* Support: https://ubuntu.com/advantage | |
System information as of Fri Jan 27 01:51:14 UTC 2023 | |
System load: 1.76708984375 Temperature: 34.0 C | |
Usage of /home: unknown Processes: 162 | |
Memory usage: 10% Users logged in: 0 | |
Swap usage: 0% IPv4 address for eth0: 192.168.86.204 | |
0 updates can be applied immediately. | |
Last login: Fri Jan 27 01:40:43 UTC 2023 on ttyAML0 | |
ubuntu@potato:~$ sudo reboot | |
ubuntu@potato:~$ | |
[ OK ] Started Show Plymouth Reboot Screen. | |
plymouth-reboot.service | |
[ OK ] Stopped Availability of block devices. | |
[ OK ] Stopped User Manager for UID 1000. | |
Stopping User Runtime Directory /run/user/1000... | |
[ OK ] Stopped User Login Management. | |
[ OK ] Unmounted /run/user/1000. | |
[ OK ] Stopped User Runtime Directory /run/user/1000. | |
[ OK ] Removed slice User Slice of UID 1000. | |
Stopping Permit User Sessions... | |
[ OK ] Stopped Permit User Sessions. | |
[ OK ] Stopped target Network. | |
[ OK ] Stopped target Remote File Systems. | |
[ OK ] Stopped target Preparation for Remote File Systems. | |
Stopping WPA supplicant... | |
[ OK ] Stopped WPA supplicant. | |
[ OK ] Stopped target Basic System. | |
[ OK ] Stopped Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Stopped target Path Units. | |
[ OK ] Stopped target Slice Units. | |
[ OK ] Removed slice User and Session Slice. | |
[ OK ] Stopped target Socket Units. | |
[ OK ] Closed cloud-init hotplug hook socket. | |
[ OK ] Closed Open-iSCSI iscsid Socket. | |
[ OK ] Closed Socket unix for snap application lxd.daemon. | |
[ OK ] Closed Socket unix for snap application lxd.user-daemon. | |
[ OK ] Closed Socket activation for snappy daemon. | |
[ OK ] Closed OpenBSD Secure Shell server socket. | |
[ OK ] Closed Syslog Socket. | |
[ OK ] Closed UUID daemon activation socket. | |
[ OK ] Stopped target System Initialization. | |
[ OK ] Unset automount Arbitrary s File System Automount Point. | |
[ OK ] Stopped target Local Encrypted Volumes. | |
[ OK ] Stopped Forward Password Ruests to Wall Directory Watch. | |
[ OK ] Stopped target Local Integrity Protected Volumes. | |
[ OK ] Stopped target Local Verity Protected Volumes. | |
[ OK ] Stopped Initial cloud-initob (metadata service crawler). | |
[ OK ] Stopped Wait for Network to be Configured. | |
Stopping Network Configuration... | |
Stopping Network Name Resolution... | |
Stopping Network Time Synchronization... | |
Stopping Record System Boot/Shutdown in UTMP... | |
[ OK ] Stopped Network Name Resolution. | |
[ OK ] Stopped Network Time Synchronization. | |
[ OK ] Stopped Network Configuration. | |
[ OK ] Stopped target Preparation for Network. | |
[ OK ] Closed Network Service Netlink Socket. | |
[ OK ] Stopped Initial cloud-init job (pre-networking). | |
[ OK ] Stopped Apply Kernel Variables. | |
[ OK ] Stopped Load Kernel Modules. | |
[ OK ] Stopped Record System Boot/Shutdown in UTMP. | |
[ OK ] Stopped Create Volatile Files and Directories. | |
[ OK ] Stopped Create final runtime dir for shutdown pivot root. | |
[ OK ] Stopped target Local File Systems. | |
Unmounting /boot/efi... | |
Unmounting /run/credentials/systemd-sysusers.service... | |
Unmounting /run/snapd/ns/lxd.mnt... | |
Unmounting Mount unit for core20, revision 1627... | |
Unmounting Mount unit for lxd, revision 23687... | |
Unmounting Mount unit for snapd, revision 17339... | |
[ OK ] Unmounted /boot/efi. | |
[ OK ] Unmounted /run/credentials/systemd-sysusers.service. | |
[ OK ] Unmounted /run/snapd/ns/lxd.mnt. | |
[ OK ] Unmounted Mount unit for core20, revision 1627. | |
[ OK ] Unmounted Mount unit for lxd, revision 23687. | |
[ OK ] Unmounted Mount unit for snapd, revision 17339. | |
Unmounting /run/snapd/ns... | |
[ OK ] Stopped File System Check dev/disk/by-label/system-boot. | |
[ OK ] Removed slice Slice /system/systemd-fsck. | |
[ OK ] Unmounted /run/snapd/ns. | |
[ OK ] Stopped target Preparation for Local File Systems. | |
[ OK ] Stopped target Swaps. | |
Deactivating swap /swapfile... | |
Stopping Monitoring of LVMmeventd or progress polling... | |
Stopping Device-Mapper Multipath Device Controller... | |
[ OK ] Stopped Create Static Device Nodes in /dev. | |
[ OK ] Stopped Create System Users. | |
[ OK ] Deactivated swap /swapfile. | |
[ OK ] Reached target Unmount All Filesystems. | |
[ OK ] Stopped Device-Mapper Multipath Device Controller. | |
[ OK ] Stopped Remount Root and Kernel File Systems. | |
[ OK ] Stopped Monitoring of LVM2 dmeventd or progress polling. | |
[ OK ] Reached target System Shutdown. | |
[ OK ] Reached target Late Shutdown Services. | |
[ OK ] Finished System Reboot. | |
[ OK ] Reached target System Reboot. | |
[ 74.807706] watchdog: watchdog0: watchdog did not stop! | |
[ 75.522750] watchdog: watchdog0: watchdog did not stop! | |
[ 75.934645] watchdog: watchdog0: watchdog did not stop! | |
[ 76.041806] reboot: Restarting system | |
bl31 reboot reason: 0xd | |
bl31 reboot reason: 0x0 | |
system cmd 1. | |
GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:10;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:11;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:12;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:13;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:14;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:15;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:16;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:17;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:18;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:19;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:1F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:20;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:21;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:22;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:23;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:24;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:25;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:26;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:27;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:28;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:29;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:2F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:30;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:31;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:32;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:33;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:34;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:35;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:36;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:37;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:38;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:39;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:3F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:40;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:41;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:42;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:43;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:44;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:45;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:46;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:47;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:48;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:49;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:4F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:50;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:51;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:52;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:53;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:54;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:55;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:56;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:57;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:58;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:59;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:5F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:60;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:61;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:62;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:63;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:64;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:65;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:66;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:67;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:68;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:69;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:6F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:70;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:71;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:72;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:73;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:74;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:75;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:76;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:77;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:78;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:79;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:7F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:80;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:81;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:82;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:83;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:84;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:85;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:86;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:87;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:88;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:89;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:8F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:90;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:91;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:92;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:93;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:94;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:95;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:96;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:97;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:98;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:99;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9A;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9B;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9C;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9D;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9E;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:9F;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A1;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A2;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A3;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A4;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A5;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A6;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A7;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A8;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:A9;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:AA;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:AB;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:AC;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:AD;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:AE;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:AF;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B1;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B2;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B3;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B4;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B5;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B6;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B7;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B8;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:B9;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:BA;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:BB;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:BC;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:BD;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:BE;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:BF;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C1;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C2;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C3;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C4;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C5;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C6;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C7;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:800;LOOP:C8;USB:0;SPI:0;CHK:A7;GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:0;READ:0;0.0;CHK:0; | |
no sdio debug board detected | |
TE: 1912627 | |
BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz | |
set vcck to 1120 mv | |
set vddee to 1000 mv | |
Board ID = 3 | |
CPU clk: 1200MHz | |
DQS-corr enabled | |
DDR scramble enabled | |
DDR3 chl: Rank0+1 @ 912MHz | |
bist_test rank: 0 1b 03 33 27 13 3c 17 00 2e 2e 19 44 18 01 30 2a 12 42 17 00 2f 2b 14 43 702 rank: 1 1b 05 31 27 12 3c 16 00 2c 2e 17 46 17 02 2c 29 13 3f 17 02 2c 2b 15 42 702 - PASS | |
Rank0: 1024MB(auto)-2T-13 | |
Rank1: 1024MB(auto)-2T-13 | |
AddrBus test pass! | |
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0 | |
New fip structure! | |
Load bl30 from SD, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0 | |
Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0 | |
Load bl33 from SD, src: 0x0004c200, des: 0x01000000, size: 0x00096a00, part: 0 | |
NOTICE: BL3-1: v1.0(release):53f813e | |
NOTICE: BL3-1: Built : 15:51:23, May 22 2019 | |
[BL31]: GXL CPU setup! | |
NOTICE: BL3-1: GXL normal boot! | |
NOTICE: BL3-1: BL33 decompress pass | |
mpu_config_enable:system pre init ok | |
dmc sec lock | |
[Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz] | |
OPS=0x85 | |
21 0e 85 00 59 17 cd 20 a3 4a 4a 10 e0 0f 05 28 | |
[2.525064 Inits done] | |
secure task start! | |
high task start! | |
low task start! | |
ERROR: Error initializing runtime service opteed_fast | |
<debug_uart> | |
U-Boot 2022.07+ (Nov 20 2022 - 18:31:28 -0500) Libre Computer Board AML-S905X-CC | |
Model: Libre Computer AML-S905X-CC | |
SoC: Amlogic Meson GXL (S905X) Revision 21:e (85:2) | |
DRAM: 2 GiB | |
Core: 177 devices, 29 uclasses, devicetree: separate | |
WDT: Not starting watchdog@98d0 | |
MMC: mmc@72000: 1, mmc@74000: 0 | |
Loading Environment from FAT... ** Bad device specification mmc 0 ** | |
** Bad device specification mmc 0 ** | |
Couldn't find partition mmc 0:1 | |
Error: could not access storage. | |
In: serial | |
Out: serial | |
Err: serial | |
[BL31]: tee size: 0 | |
Net: Fast Ethernet | |
[BL31]: tee size: 0 | |
Net: No ethernet found. | |
starting USB... | |
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2 | |
Register 2000140 NbrPorts 2 | |
Starting the controller | |
USB XHCI 1.00 | |
scanning bus usb@c9000000 for devices... 2 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Hit any key to stop autoboot: 1 0 | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
** Unable to read file ubootefi.var ** | |
Failed to load EFI variables | |
BootOrder not defined | |
EFI boot manager: Cannot load any image | |
Found EFI removable media binary efi/boot/bootaa64.efi | |
1890184 bytes read in 90 ms (20 MiB/s) | |
Booting /efi\boot\bootaa64.efi | |
EFI stub: Booting Linux Kernel... | |
EFI stub: Using DTB from configuration table | |
EFI stub: Exiting boot services... | |
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
[ 0.000000] Linux version 6.0.19-02541-gd380b952927c (autobuild@deb.libre.computer) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Sat Jan 21 06:14:42 UTC 2023 | |
[ 0.000000] Machine model: Libre Computer AML-S905X-CC | |
[ 0.000000] efi: EFI v2.90 by Das U-Boot | |
[ 0.000000] efi: ESRT=0x7ae51040 RTPROP=0x7ae53040 SMBIOS=0x7ae55000 RNG=0x57df0040 MEMRESERVE=0x57def040 | |
[ 0.000000] random: crng init done | |
[ 0.000000] esrt: Reserving ESRT space from 0x000000007ae51040 to 0x000000007ae51078. | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] DMA32 empty | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] | |
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] | |
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] | |
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] | |
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] | |
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007ae52fff] | |
[ 0.000000] node 0: [mem 0x000000007ae53000-0x000000007ae53fff] | |
[ 0.000000] node 0: [mem 0x000000007ae54000-0x000000007ae54fff] | |
[ 0.000000] node 0: [mem 0x000000007ae55000-0x000000007ae57fff] | |
[ 0.000000] node 0: [mem 0x000000007ae58000-0x000000007ae58fff] | |
[ 0.000000] node 0: [mem 0x000000007ae59000-0x000000007ae5cfff] | |
[ 0.000000] node 0: [mem 0x000000007ae5d000-0x000000007de7ffff] | |
[ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff] | |
[ 0.000000] node 0: [mem 0x000000007de90000-0x000000007fe5afff] | |
[ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv0.2 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: Trusted OS migration not required | |
[ 0.000000] percpu: Embedded 20 pages/cpu s43240 r8192 d30488 u81920 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
[ 0.000000] CPU features: detected: ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.19-02541-gd380b952927c root=UUID=672a0911-0909-4a3e-bb4a-772b26b8b543 ro noquiet splash vt.handoff=7 | |
[ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.0.19-02541-gd380b952927c", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 1683016K/2097152K available (15232K kernel code, 1946K rwdata, 6152K rodata, 3712K init, 781K bss, 151992K reserved, 262144K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] Dynamic Preempt: full | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU event tracing is enabled. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
[ 0.000000] Trampoline variant of Tasks RCU enabled. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.000638] Console: colour dummy device 80x25 | |
[ 0.001159] printk: console [tty0] enabled | |
[ 0.001201] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
[ 0.001224] pid_max: default: 32768 minimum: 301 | |
[ 0.001287] LSM: Security Framework initializing | |
[ 0.001312] Yama: becoming mindful. | |
[ 0.001432] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.001460] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.002775] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.002817] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.002890] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.003029] rcu: Hierarchical SRCU implementation. | |
[ 0.003043] rcu: Max phase no-delay instances is 1000. | |
[ 0.004278] Remapping and enabling EFI services. | |
[ 0.004639] smp: Bringing up secondary CPUs ... | |
[ 0.005147] Detected VIPT I-cache on CPU1 | |
[ 0.005281] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
[ 0.005874] Detected VIPT I-cache on CPU2 | |
[ 0.005994] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
[ 0.006550] Detected VIPT I-cache on CPU3 | |
[ 0.006670] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
[ 0.006757] smp: Brought up 1 node, 4 CPUs | |
[ 0.006827] SMP: Total of 4 processors activated. | |
[ 0.006840] CPU features: detected: 32-bit EL0 Support | |
[ 0.006850] CPU features: detected: 32-bit EL1 Support | |
[ 0.006863] CPU features: detected: CRC32 instructions | |
[ 0.007339] CPU: All CPU(s) started at EL2 | |
[ 0.007376] alternatives: patching kernel code | |
[ 0.008796] devtmpfs: initialized | |
[ 0.014320] Registered cp15_barrier emulation handler | |
[ 0.014360] Registered setend emulation handler | |
[ 0.014540] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.014576] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.020706] pinctrl core: initialized pinctrl subsystem | |
[ 0.021251] SMBIOS 3.0 present. | |
[ 0.021282] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022 | |
[ 0.021728] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.022815] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.023123] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
[ 0.023290] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.023380] audit: initializing netlink subsys (disabled) | |
[ 0.023587] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
[ 0.024852] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.024868] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.024889] thermal_sys: Registered thermal governor 'power_allocator' | |
[ 0.025141] cpuidle: using governor menu | |
[ 0.025327] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.025437] ASID allocator initialised with 32768 entries | |
[ 0.038049] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039345] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu | |
[ 0.039783] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx | |
[ 0.041903] KASLR enabled | |
[ 0.048754] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
[ 0.048789] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page | |
[ 0.048804] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
[ 0.048816] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page | |
[ 0.048830] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
[ 0.048842] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page | |
[ 0.048855] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
[ 0.048867] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
[ 0.116749] raid6: neonx8 gen() 2147 MB/s | |
[ 0.184820] raid6: neonx4 gen() 2198 MB/s | |
[ 0.252897] raid6: neonx2 gen() 2087 MB/s | |
[ 0.320973] raid6: neonx1 gen() 1810 MB/s | |
[ 0.389030] raid6: int64x8 gen() 1490 MB/s | |
[ 0.457106] raid6: int64x4 gen() 1664 MB/s | |
[ 0.525186] raid6: int64x2 gen() 1412 MB/s | |
[ 0.593260] raid6: int64x1 gen() 1052 MB/s | |
[ 0.593272] raid6: using algorithm neonx4 gen() 2198 MB/s | |
[ 0.661319] raid6: .... xor() 1583 MB/s, rmw enabled | |
[ 0.661331] raid6: using neon recovery algorithm | |
[ 0.661529] fbcon: Taking over console | |
[ 0.662916] iommu: Default domain type: Passthrough | |
[ 0.663267] SCSI subsystem initialized | |
[ 0.663656] usbcore: registered new interface driver usbfs | |
[ 0.663705] usbcore: registered new interface driver hub | |
[ 0.663746] usbcore: registered new device driver usb | |
[ 0.664172] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.664186] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.664212] PTP clock support registered | |
[ 0.664334] EDAC MC: Ver: 3.0.0 | |
[ 0.664858] Registered efivars operations | |
[ 0.665228] FPGA manager framework | |
[ 0.665377] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.665957] NetLabel: Initializing | |
[ 0.665974] NetLabel: domain hash size = 128 | |
[ 0.665985] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ 0.666044] NetLabel: unlabeled traffic allowed by default | |
[ 0.666477] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.666705] VFS: Disk quotas dquot_6.6.0 | |
[ 0.666757] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 0.666884] FS-Cache: Loaded | |
[ 0.672409] NET: Registered PF_INET protocol family | |
[ 0.672593] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.674245] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
[ 0.674344] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.674373] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
[ 0.674522] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
[ 0.674734] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 0.674960] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) | |
[ 0.675046] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.675099] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
[ 0.675274] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.675718] RPC: Registered named UNIX socket transport module. | |
[ 0.675752] RPC: Registered udp transport module. | |
[ 0.675763] RPC: Registered tcp transport module. | |
[ 0.675773] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.675790] NET: Registered PF_XDP protocol family | |
[ 0.675811] PCI: CLS 0 bytes, default 64 | |
[ 0.676023] Trying to unpack rootfs image as initramfs... | |
[ 0.687213] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
[ 0.687769] kvm [1]: IPA Size Limit: 40 bits | |
[ 0.689160] kvm [1]: vgic interrupt IRQ9 | |
[ 0.689315] kvm [1]: Hyp mode initialized successfully | |
[ 0.690932] Initialise system trusted keyrings | |
[ 0.691226] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
[ 0.697125] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.697767] NFS: Registering the id_resolver key type | |
[ 0.697825] Key type id_resolver registered | |
[ 0.697837] Key type id_legacy registered | |
[ 0.697922] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.697938] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 0.698836] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled | |
[ 0.700270] 9p: Installing v9fs 9p2000 file system support | |
[ 0.737893] xor: measuring software checksum speed | |
[ 0.741999] 8regs : 2442 MB/sec | |
[ 0.745965] 32regs : 2522 MB/sec | |
[ 0.750135] arm64_neon : 2406 MB/sec | |
[ 0.750172] xor: using function: 32regs (2522 MB/sec) | |
[ 0.750195] Key type asymmetric registered | |
[ 0.750208] Asymmetric key parser 'x509' registered | |
[ 0.955568] Freeing initrd memory: 27364K | |
[ 0.969015] alg: self-tests for CTR-KDF (hmac(sha256)) passed | |
[ 0.969130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
[ 0.969249] io scheduler mq-deadline registered | |
[ 0.969267] io scheduler kyber registered | |
[ 0.969318] io scheduler bfq registered | |
[ 0.970086] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized | |
[ 0.986455] soc soc0: Amlogic Meson GXL (S905X) Revision 21:e (85:2) Detected | |
[ 0.990786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.998869] loop: module loaded | |
[ 1.002292] tun: Universal TUN/TAP device driver, 1.6 | |
[ 1.003392] VFIO - User Level meta-driver version: 0.3 | |
[ 1.004599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.004632] ehci-pci: EHCI PCI platform driver | |
[ 1.004675] ehci-platform: EHCI generic platform driver | |
[ 1.004810] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 1.004847] ohci-pci: OHCI PCI platform driver | |
[ 1.004889] ohci-platform: OHCI generic platform driver | |
[ 1.005275] usbcore: registered new interface driver usb-storage | |
[ 1.006035] i2c_dev: i2c /dev entries driver | |
[ 1.009927] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.009963] sdhci: Copyright(c) Pierre Ossman | |
[ 1.010380] Synopsys Designware Multimedia Card Interface Driver | |
[ 1.011007] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.012080] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 1.013056] meson-sm: secure-monitor enabled | |
[ 1.013639] hid: raw HID events driver (C) Jiri Kosina | |
[ 1.013767] usbcore: registered new interface driver usbhid | |
[ 1.013783] usbhid: USB HID core driver | |
[ 1.014135] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered | |
[ 1.017803] NET: Registered PF_PACKET protocol family | |
[ 1.018143] 9pnet: Installing 9P2000 support | |
[ 1.018233] Key type dns_resolver registered | |
[ 1.018700] registered taskstats version 1 | |
[ 1.018737] Loading compiled-in X.509 certificates | |
[ 1.021053] zswap: loaded using pool zstd/z3fold | |
[ 1.021625] Key type .fscrypt registered | |
[ 1.021656] Key type fscrypt-provisioning registered | |
[ 1.022578] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes | |
[ 1.043076] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart | |
[ 2.371072] printk: console [ttyAML0] enabled | |
[ 2.380857] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq | |
[ 2.381649] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware | |
domain-0 init dvfs: 4 | |
[ 2.404313] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 | |
[ 2.404353] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 | |
[ 2.420227] meson-gx-mmc d0074000.mmc: no support for card's volts | |
[ 2.420786] mmc0: error -22 whilst initialising SDIO card | |
[ 2.945603] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator | |
[ 2.947300] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator | |
[ 2.954571] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM | |
[ 2.964472] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 2.966736] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
[ 2.974310] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports | |
[ 2.980141] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 | |
[ 2.989489] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000 | |
[ 2.995565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 | |
[ 3.003521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.010669] usb usb1: Product: xHCI Host Controller | |
[ 3.015495] usb usb1: Manufacturer: Linux 6.0.19-02541-gd380b952927c xhci-hcd | |
[ 3.022570] usb usb1: SerialNumber: xhci-hcd.0.auto | |
[ 3.027845] hub 1-0:1.0: USB hub found | |
[ 3.031143] hub 1-0:1.0: 2 ports detected | |
[ 3.037745] meson-gx-mmc d0072000.mmc: Got CD GPIO | |
[ 3.038281] of_cfs_init | |
[ 3.042306] of_cfs_init: OK | |
[ 3.045252] ALSA device list: | |
[ 3.048014] No soundcards found. | |
[ 3.069609] Freeing unused kernel memory: 3712K | |
[ 3.069795] Run /init as init process | |
Loading, please wait... | |
Starting version 251.4-1ubuntu7 | |
[ 3.186850] mmc1: new ultra high speed SDR50 SDXC card at address aaaa | |
[ 3.188454] mmcblk1: mmc1:aaaa SN64G 59.5 GiB | |
[ 3.196338] mmcblk1: p1 p2 | |
[ 3.290541] usb 1-1: new high-speed USB device number 2 using xhci-hcd | |
[ 3.345287] BTRFS: device label writable devid 1 transid 480 /dev/mmcblk1p2 scanned by systemd-udevd (176) | |
[ 3.438961] mmc0: Card stuck being busy! __mmc_poll_for_busy | |
[ 3.440212] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 | |
[ 3.447314] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 3.454276] usb 1-1: Product: USB2.0 Hub | |
[ 3.534971] hub 1-1:1.0: USB hub found | |
[ 3.535393] hub 1-1:1.0: 4 ports detected | |
[ 3.568684] [drm] Initialized simpledrm 1.0.0 20200625 for 7fe5b000.framebuffer on minor 0 | |
[ 3.601087] Console: switching to colour frame buffer device 90x36 | |
[ 3.611361] simple-framebuffer 7fe5b000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device | |
[ 3.655040] simple-framebuffer simple-framebuffer.0: [drm] *ERROR* could not acquire memory range [mem 0x7fe5b000-0x7ffeffff flags 0x200]: error -16 | |
[ 3.663255] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16 | |
[ 3.673199] meson-drm d0100000.vpu: Queued 2 outputs on vpu | |
[ 3.701860] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found | |
[ 3.703431] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found | |
[ 3.709477] meson8b-dwmac c9410000.ethernet: PTP uses main clock | |
[ 3.716221] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 | |
[ 3.722588] meson8b-dwmac c9410000.ethernet: DWMAC1000 | |
[ 3.731523] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported | |
[ 3.738754] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported | |
[ 3.746296] meson8b-dwmac c9410000.ethernet: COE Type 2 | |
[ 3.750874] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported | |
[ 3.756673] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 | |
[ 3.759703] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported | |
[ 3.766747] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 | |
[ 3.766857] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 | |
[ 3.777502] meson8b-dwmac c9410000.ethernet: Normal descriptors | |
[ 3.787199] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 | |
[ 3.789393] meson8b-dwmac c9410000.ethernet: Ring mode enabled | |
[ 3.794266] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.798065] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
[ 3.805566] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus | |
[ 3.841074] Console: switching to colour dummy device 80x25 | |
[ 3.854232] lima d00c0000.gpu: bus rate = 166666667 | |
[ 3.854298] lima d00c0000.gpu: mod rate = 24000000 | |
[ 3.858692] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found | |
[ 3.860152] Trying to free nonexistent resource <000000007fe5b000-000000007ffeffff> | |
[ 3.874746] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 | |
[ 3.910602] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) | |
[ 3.915816] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver | |
[ 3.923446] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) | |
[ 3.932119] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 2 | |
[ 3.960236] Console: switching to colour frame buffer device 90x36 | |
[ 3.984244] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device | |
Begin: Loading essential drivers ... [ 5.333096] async_tx: api initialized (async) | |
done. | |
Begin: Running /scripts/init-premount ... done. | |
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems | |
done. | |
Begin: Will now check root file system ... fsck from util-linux 2.38 | |
[/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 | |
done. | |
[ 5.678236] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm | |
[ 5.681173] BTRFS info (device mmcblk1p2): disk space caching is enabled | |
[ 5.700262] BTRFS info (device mmcblk1p2): enabling ssd optimizations | |
done. | |
Begin: Running /scripts/local-bottom ... done. | |
Begin: Running /scripts/init-bottom ... done. | |
[ 6.339858] systemd[1]: System time before build time, advancing clock. | |
[ 6.425439] NET: Registered PF_INET6 protocol family | |
[ 6.449077] Segment Routing with IPv6 | |
[ 6.449201] RPL Segment Routing with IPv6 | |
[ 6.451278] In-situ OAM (IOAM) with IPv6 | |
[ 6.526062] systemd[1]: systemd 251.4-1ubuntu7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
[ 6.553722] systemd[1]: Detected architecture arm64. | |
Welcome to Ubuntu 22.10! | |
[ 6.563942] systemd[1]: Hostname set to <potato>. | |
-.mount | |
[ 7.452444] systemd[1]: Queued start job for default target Graphical Interface. | |
[ 7.550945] systemd[1]: Created slice Slice /system/modprobe. | |
[ 7.553716] systemd[1]: Created slice Slice /system/serial-getty. | |
32m [ 7.560143] systemd[1]: Created slice Slice /system/systemd-fsck. | |
OK ] Created slice [ 7.567676] systemd[1]: Created slice User and Session Slice. | |
Slice /system/modprobe systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[0m. | |
[ OK ] Created slice Slice /system/serial-getty.[ 7.587868] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ OK ] Created slice Slice /system/systemd-fsck. | |
[ OK ] Created slice User[ 7.607164] systemd[1]: Reached target Local Integrity Protected Volumes. | |
and Session Slice. | |
[ OK ] Started 7.618743] systemd[1]: Reached target Slice Units. | |
39mForward Password Ruests to Wall Directory Watch. | |
[ 7.629145] systemd[1]: Reached target Local Verity Protected Volumes. | |
;32m OK ] Set up automount Arbitrarys File Syste[ 7.641617] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
m Automount Point. | |
[ 7.655124] systemd[1]: Listening on LVM2 poll daemon socket. | |
m OK ] Reached target systemd[1]: Listening on multipathd control socket. | |
[0;1;39mLocal Integrity P[ 7.671162] systemd[1]: Listening on Syslog Socket. | |
rotected Volumes. | |
[ 7.677289] systemd[1]: Listening on fsck to fsckd communication Socket. | |
32m OK ] Reached targe[ 7.686062] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
t Slice Units 7.695226] systemd[1]: Listening on Journal Audit Socket. | |
0m. | |
[ OK ][ 7.702365] systemd[1]: Listening on Journal Socket (/dev/log). | |
Reached target [ 7.710556] systemd[1]: Listening on Journal Socket. | |
Local Verity Protected Vo[ 7.717697] systemd[1]: Listening on Network Service Netlink Socket. | |
lumes. | |
[ OK[ 7.727350] systemd[1]: Listening on udev Control Socket. | |
] Listening on 7.733351] systemd[1]: Listening on udev Kernel Socket. | |
1;39mDevice-mapper event daemon FIFOs. | |
[ OK ] Listening on LVM2 poll daemon socket. | |
[ OK ] Listening on multipathd control socket. | |
[ OK ] Listening on Syslog Socket. | |
[ OK ] Listening on fsck to fsckd communication Socket. | |
[ OK ] Listening on initctl Compatibility Named Pipe. | |
[ OK ] Listening on Journal Audit Socket. | |
[ OK ] Listening on Jo[ 7.786949] systemd[1]: Mounting Huge Pages File System... | |
urnal Socket (/dev/log). | |
[ OK ] Listening on 7.797526] systemd[1]: Mounting POSIX Message Queue File System... | |
9mJournal Socket. | |
[ OK ] Listening on 7.809874] systemd[1]: Mounting Kernel Debug File System... | |
;1;39mNetwork Service Netlink Socket systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
[0m. | |
[ OK ] Listening on u[ 7.835460] systemd[1]: Starting Journal Service... | |
dev Control Socket. | |
[ OK ] Listening on udev Kernel Socket.[ 7.847467] systemd[1]: Starting Set the console keyboard layout... | |
Mounting Huge Pages File System... | |
Mounting POSIX Mes[ 7.860393] systemd[1]: Starting Create List of Static Device Nodes... | |
sage Queue File System... | |
Mounting Kernel[ 7.874768] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
Debug File System... | |
Starting 7.886821] systemd[1]: LXD - agent was skipped because of a failed condition check (ConditionPathExists=/dev/virtio-ports/org.linuxcontainers.lxd). | |
[ 7.893223] systemd[1]: Starting Load Kernel Module chromeos_pstore... | |
1;39mJournal Service... | |
Starting Set the console keyboard layout... | |
Starting Create List of Static D[ 7.919488] systemd[1]: Starting Load Kernel Module configfs... | |
evice Nodes... | |
Starting Monitoring of [ 7.932978] systemd[1]: Starting Load Kernel Module drm... | |
LVMmeventd or progress polling... | |
Starting [ 7.944016] systemd[1]: Starting Load Kernel Module efi_pstore... | |
Load Kernel Module chromeos_pstore... | |
Starting Load Kernel Module conf[ 7.956801] systemd[1]: Starting Load Kernel Module fuse... | |
igfs... | |
Starting Load Kernel Module drm... | |
Starting Load Kernel Module efi_pst[ 7.973582] systemd[1]: Starting Load Kernel Module pstore_blk... | |
[ 7.980589] fuse: init (API version 7.36) | |
ore... | |
Starting Load Kernel Module fuse... | |
Starting Load Kernel Module pstore_blk... | |
[ 8.031131] systemd[1]: Starting Load Kernel Module pstore_zone... | |
Starting Load Kernel Module pstore_zone... | |
[ 8.042430] systemd[1]: Starting Load Kernel Module ramoops... | |
Starting Load Kernel Module ramoops... | |
[ 8.056628] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of a failed condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). | |
[ 8.070025] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root). | |
[ 8.123140] systemd[1]: Starting Load Kernel Modules... | |
Starting Load Kernel Modules... | |
[ 8.130648] systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting Re[ 8.139363] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. | |
mount Root and Kernel File Systems... | |
[ 8.152963] Asymmetric key parser 'pkcs8' registered | |
[ 8.156443] systemd[1]: Starting Coldplug All udev Devices... | |
[ 8.160477] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3 | |
Starting Coldplug All udev Devices... | |
[ 8.181114] systemd[1]: Started Journal Service. | |
[ OK ] Started Journal Service. | |
systemd-journald.service | |
[ OK ] Mounted Huge Pages File System. | |
[ OK ] Mounted POSIX Message Queue File System. | |
dev-hugepages.mount | |
[ OK ] Mounted Kernel Debug File System. | |
[ OK ] Finished Set the console keyboard layout. | |
[ OK ] Finished Create List of Static Device Nodes. | |
dev-mqueue.mount | |
[ OK ] Finished Monitoring of LVM dmeventd or progress polling. | |
sys-kernel-debug.mount | |
keyboard-setup.service | |
kmod-static-nodes.service | |
lvm2-monitor.service | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module configfs. | |
[ OK ] Finished Load Kernel Module drm. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module fuse. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ OK ] Finished Load Kernel Modules. | |
systemd-modules-load.service | |
[ OK ] Finished Remount Root and Kernel File Systems. | |
systemd-remount-fs.service | |
Mounting FUSE Control File System... | |
Mounting Kernel Configuration File System... | |
Starting Device-Mapper Multipath Device Controller... | |
Starting 8.331581] alua: device handler registered | |
;1;39mFlush Journal to Pe[ 8.337477] emc: device handler registered | |
rsistent Storage... | |
Starting Load/Save Random Seed... | |
Starting Apply Kernel Variables... | |
Starting Create [ 8.356694] systemd-journald[392]: Received client request to flush runtime journal. | |
System Users... | |
run-credentials-systemd\x2dsysusers.service.mount | |
[ 8.369803] rdac: device handler registered | |
[ OK ] Mounted FUSE Control File System. | |
sys-fs-fuse-connections.mount | |
[ OK ] Mounted Kernel Configuration File System. | |
sys-kernel-config.mount | |
[ OK ] Finished Apply Kernel Variables. | |
systemd-sysctl.service | |
[ OK ] Finished Coldplug All udev Devices. | |
systemd-udev-trigger.service | |
[ OK ] Finished Load/Save Random Seed. | |
systemd-random-seed.service | |
[ OK ] Finished Create System Users. | |
systemd-sysusers.service | |
Starting Create Static Device Nodes in /dev... | |
[ OK ] Finished Create Static Device Nodes in /dev. | |
[ OK ] Finished Flush Journal to Persistent Storage. | |
systemd-tmpfiles-setup-dev.service | |
systemd-journal-flush.service | |
Starting Rule-based Managefor Device Events and Files... | |
[ OK ] Started Device-Mapper Multipath Device Controller. | |
[ OK ] Reached target Preparation for Local File Systems. | |
multipathd.service | |
Mounting Mount unit for core20, revision 1627... | |
Mounting Mount unit for lxd, revision 23687... | |
Mounting Mount unit for snapd, revision 17339... | |
[ OK ] Mounted Mount unit for core20, revision 1627. | |
snap-core20-1627.mount | |
[ OK ] Mounted Mount unit for lxd, revision 23687. | |
[ OK ] Mounted Mount unit for snapd, revision 17339. | |
snap-lxd-23687.mount | |
snap-snapd-17339.mount | |
[ OK ] Started Rule-based Manager for Device Events and Files. | |
systemd-udevd.service | |
Starting Show Plymouth Boot Screen... | |
[ OK ] Started Show Plymouth Boot Screen. | |
plymouth-start.service | |
[ OK ] Started Forward Password Rs to Plymouth Directory Watch. | |
[ OK ] Reached target Local Encrypted Volumes. | |
[ OK ] Found device /dev/ttyAML0. | |
[ OK ] Found device /dev/disk/by-label/system-boot. | |
Starting File System Checkv/disk/by-label/system-boot... | |
[ OK ] Started File System Check Daemon to report status. | |
systemd-fsckd.service | |
systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service | |
[ OK ] Finished File System Checkdev/disk/by-label/system-boot. | |
Mounting /boot/efi... | |
[ OK ] Mounted /boot/efi. | |
boot-efi.mount | |
[ OK ] Reached target Local File Systems. | |
[BL31]: tee size: 0 | |
Starting Set console font and keymap... | |
Starting Create final runtdir for shutdown pivot root... | |
Starting Tell Plymouth To Write Out Runtime Data... | |
Starting Create Volatile Files and Directories... | |
Starting Uncomplicated firewall... | |
[ OK ] Finished Set console font and keymap. | |
console-setup.service | |
[ OK ] Finished Create final runte dir for shutdown pivot root. | |
finalrd.service | |
[ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
plymouth-read-write.service | |
[ OK ] Finished Uncomplicated firewall. | |
ufw.service | |
[ OK ] Finished Create Volatile Files and Directories. | |
systemd-tmpfiles-setup.service | |
Starting Network Name Resolution... | |
Starting Network Time Synchronization... | |
Starting Record System Boot/Shutdown in UTMP... | |
Starting Initial cloud-init job (pre-networking)... | |
[ OK ] Reached target Hardware activated USB gadget. | |
[ OK ] Finished Record System Boot/Shutdown in UTMP. | |
systemd-update-utmp.service | |
[ OK ] Started Network Time Synchronization. | |
[ OK ] Reached target System Time Set. | |
systemd-timesyncd.service | |
[ OK ] Started Network Name Resolution. | |
[ OK ] Reached target Host and Network Name Lookups. | |
systemd-resolved.service | |
Starting Load Kernel Module chromeos_pstore... | |
Starting Load Kernel Module efi_pstore... | |
Starting Load Kernel Module pstore_blk... | |
Starting Load Kernel Module pstore_zone... | |
Starting Load Kernel Module ramoops... | |
[ OK ] Finished Load Kernel Module chromeos_pstore. | |
[ OK ] Finished Load Kernel Module efi_pstore. | |
[ OK ] Finished Load Kernel Module pstore_blk. | |
[ OK ] Finished Load Kernel Module pstore_zone. | |
[ OK ] Finished Load Kernel Module ramoops. | |
[ 13.667624] cloud-init[590]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'init-local' at Fri, 27 Jan 2023 01:51:24 +0000. Up 13.50 seconds. | |
[ OK ] Finished Initial cloud-init job (pre-networking). | |
cloud-init-local.service | |
[ OK ] Reached target Preparation for Network. | |
Starting Network Configuration... | |
[ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. | |
[ OK ] Started Network Configuration. | |
systemd-networkd.service | |
Starting Wait for Network to be Configured... | |
[ OK ] Finished Wait for Network to be Configured. | |
systemd-networkd-wait-online.service | |
Starting Initial cloud-ini (metadata service crawler)... | |
[ 33.721585] cloud-init[639]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'init' at Fri, 27 Jan 2023 01:57:56 +0000. Up 33.55 seconds. | |
[ 33.801690] cloud-init[639]: ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++ | |
[ 33.802180] cloud-init[639]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.804786] cloud-init[639]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address | | |
[ 33.806830] cloud-init[639]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.809488] cloud-init[639]: ci-info: | eth0 | True | 192.168.86.204 | 255.255.255.0 | global | d6:42:f4:77:0d:f6 | | |
[ 33.811752] cloud-init[639]: ci-info: | eth0 | True | fe80::d442:f4ff:fe77:df6/64 | . | link | d6:42:f4:77:0d:f6 | | |
[ 33.814070] cloud-init[639]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . | | |
[ 33.816394] cloud-init[639]: ci-info: | lo | True | ::1/128 | . | host | . | | |
[ 33.819109] cloud-init[639]: ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+ | |
[ 33.821549] cloud-init[639]: ci-info: ++++++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++++ | |
[ 33.823738] cloud-init[639]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.825765] cloud-init[639]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags | | |
[ 33.828080] cloud-init[639]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.830075] cloud-init[639]: ci-info: | 0 | 0.0.0.0 | 192.168.86.1 | 0.0.0.0 | eth0 | UG | | |
[ 33.832374] cloud-init[639]: ci-info: | 1 | 192.168.86.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U | | |
[ 33.834664] cloud-init[639]: ci-info: +-------+--------------+--------------+---------------+-----------+-------+ | |
[ 33.837421] cloud-init[639]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++ | |
[ 33.839493] cloud-init[639]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 33.841669] cloud-init[639]: ci-info: | Route | Destination | Gateway | Interface | Flags | | |
[ 33.843688] cloud-init[639]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ 33.845939] cloud-init[639]: ci-info: | 1 | fe80::/64 | :: | eth0 | U | | |
[ 33.848148] cloud-init[639]: ci-info: | 3 | local | :: | eth0 | U | | |
[ 33.850508] cloud-init[639]: ci-info: | 4 | multicast | :: | eth0 | U | | |
[ 33.852598] cloud-init[639]: ci-info: +-------+-------------+---------+-----------+-------+ | |
[ OK ] Finished Initial cloud-iniob (metadata service crawler). | |
[ OK ] Reached target Cloud-config availability. | |
cloud-init.service | |
Activating swap /swapfile... | |
[ OK ] Activated swap /swapfile. | |
[ OK ] Reached target Swaps. | |
[ OK ] Reached target System Initialization. | |
swapfile.swap | |
[ OK ] Started Daily apt download activities. | |
[ OK ] Started Daily apt upgrade and clean activities. | |
[ OK ] Started Daily dpkg database backup timer. | |
[ OK ] Started Periodic ext4 Onliata Check for All Filesystems. | |
[ OK ] Started Discard unused blocks once a week. | |
[ OK ] Started Daily rotation of log files. | |
[ OK ] Started Daily man-db regeneration. | |
[ OK ] Started Message of the Day. | |
[ OK ] Started Daily Cleanup of Temporary Directories. | |
[ OK ] Started Ubuntu Advantage Timer for running repeated jobs. | |
[ OK ] Reached target Path Units. | |
[ OK ] Listening on cloud-init hotplug hook socket. | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Listening on Open-iSCSI iscsid Socket. | |
[ OK ] Listening on Socket unix for snap application lxd.daemon. | |
[ OK ] Listening on Socket unix fp application lxd.user-daemon. | |
Starting Socket activation for snappy daemon... | |
[ OK ] Listening on OpenBSD Secure Shell server socket. | |
[ OK ] Listening on UUID daemon activation socket. | |
[ OK ] Listening on Socket activation for snappy daemon. | |
[ OK ] Reached target Socket Units. | |
[ OK ] Reached target Basic System. | |
Starting Save/Restore Sound Card State... | |
Starting D-Bus System Message Bus... | |
[ OK ] Started Save initial kernel messages after boot. | |
dmesg.service | |
Starting DUN service... | |
Starting Remove Stale Onlit4 Metadata Check Snapshots... | |
Starting Record successful boot for GRUB... | |
[ OK ] Started irqbalance daemon. | |
irqbalance.service | |
Starting Telephony service... | |
Starting System Logging Service... | |
[ OK ] Reached target Preparation for Logins. | |
Starting Snap Daemon... | |
Starting User Login Management... | |
[ OK ] Finished Save/Restore Sound Card State. | |
[ OK ] Reached target Sound Card. | |
alsa-restore.service | |
[ OK ] Started D-Bus System Message Bus. | |
dbus.service | |
Starting WPA supplicant... | |
[ OK ] Started Telephony service. | |
[ OK ] Started DUN service. | |
ofono.service | |
dundee.service | |
[ OK ] Finished Record successful boot for GRUB. | |
Starting GRUB failed boot detection... | |
Mounting Arbitrary Executable File Formats File System... | |
[ OK ] Started User Login Management. | |
systemd-logind.service | |
[ OK ] Started System Logging Service. | |
rsyslog.service | |
proc-sys-fs-binfmt_misc.mount | |
[ OK ] Mounted Arbitrary Executable File Formats File System. | |
[ OK ] Started WPA supplicant. | |
wpa_supplicant.service | |
[ OK ] Reached target Network. | |
[ OK ] Reached target Network is Online. | |
[ OK ] Started Download data for ailed at package install time. | |
[ OK ] Started Check to see whethw version of Ubuntu available. | |
[ OK ] Reached target Timer Units. | |
[ OK ] Reached target Preparation for Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
Starting LSB: automatic crash report generation... | |
[ OK ] Finished Availability of block devices. | |
blk-availability.service | |
[ OK ] Started Regular background program processing daemon. | |
cron.service | |
Starting LSB: rng-tools (Debian variant)... | |
Starting Service for snap application lxd.activate... | |
Starting Permit User Sessions... | |
[ OK ] Started Unattended Upgrades Shutdown. | |
unattended-upgrades.service | |
[ OK ] Finished Remove Stale Onliext4 Metadata Check Snapshots. | |
[ OK ] Finished GRUB failed boot detection. | |
[ OK ] Finished Permit User Sessions. | |
systemd-user-sessions.service | |
Starting Hold until boot process finishes up... | |
Starting Terminate Plymouth Boot Screen... | |
[ 38.182253] cloud-init[808]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'modules:config' at Fri, 27 Jan 2023 01:58:00 +0000. Up 37.84 seconds. | |
Ubuntu 22.10 potato ttyAML0 | |
potato login: [ 41.104960] cloud-init[834]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 running 'modules:final' at Fri, 27 Jan 2023 01:58:03 +0000. Up 40.76 seconds. | |
[ 41.617968] cloud-init[834]: Cloud-init v. 22.4.2-0ubuntu0~22.10.1 finished at Fri, 27 Jan 2023 01:58:04 +0000. Datasource DataSourceNoCloud [seed=/dev/mmcblk1p1][dsmode=local]. Up 41.49 seconds | |
potato login: ubuntu | |
Password: | |
Welcome to Ubuntu 22.10 (GNU/Linux 6.0.19-02541-gd380b952927c aarch64) | |
* Documentation: https://help.ubuntu.com | |
* Management: https://landscape.canonical.com | |
* Support: https://ubuntu.com/advantage | |
System information as of Fri Jan 27 01:58:58 UTC 2023 | |
System load: 0.947265625 Temperature: 34.0 C | |
Usage of /home: unknown Processes: 160 | |
Memory usage: 9% Users logged in: 0 | |
Swap usage: 0% IPv4 address for eth0: 192.168.86.204 | |
0 updates can be applied immediately. | |
Last login: Fri Jan 27 01:51:17 UTC 2023 on ttyAML0 | |
ubuntu@potato:~$ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment