SyncChannel

/*  FeatherClock
 *  Quick and easy clock using the Adafruit Feather M0, OLED FeatherWing, and RTC FeatherWing
 *  
 *  By: Dan Watson
 *  syncchannel.blogspot.com
 *  3-29-2016
 *  
 *  List of hardware you need:
 *  - Adafruit Feather (I used Feather M0 here, others will work with mods to the program)
 *     (https://www.adafruit.com/products/2772)

SyncChannel

/*  LoRa FeatherWing IOX Adafruit IO Gateway Example Program
 *  By: Dan Watson | syncchannel.blogspot.com
 *  Date: 3-12-2016
 *  Version: 0.1 Initial Release
 *  
 *  Example Adafruit IO Gateway Program for the LoRa FeatherWing IOX for Adafruit Feather
 *  Tested with HUZZAH ESP8266
 *  
 *  This program configures the Feather as a LoRa receiver and Adafruit IO Wi-Fi Gateway.
 *  It is intended as a companion to the LoRA FeatherWing IOX Beacon Example Program.

SyncChannel

/*  LoRa FeatherWing IOX Tranceiver Mode Example Program
 *  By: Dan Watson | syncchannel.blogspot.com
 *  Date: 3-12-2016
 *  Version: 0.1 Initial Release
 *  
 *  Example Tranceiver Mode Program for the LoRa FeatherWing IOX for Adafruit Feather
 *  Tested with Feather M0, 32U4 and HUZZAH ESP8266
 *  
 *  This program configures the Feather as a LoRa receiver. It is intended as a companion
 *  to the LoRA FeatherWing Beacon Example Program, and can receive the beacon messages.

SyncChannel

/*  LoRa FeatherWing IOX Beacon Mode Example Program
 *  By: Dan Watson | syncchannel.blogspot.com
 *  Date: 3-12-2016
 *  Version: 0.1 Initial Release
 *  
 *  Example Beacon Mode Program for the LoRa FeatherWing IOX for Adafruit Feather
 *  Tested with Feather M0, 32U4, and HUZZAH ESP8266
 *  However, you only have one analog input on HUZZAH (1V input max!)
 *  
 *  This program configures the Feather as a transmit-only beacon. It transmits a payload of data

SyncChannel

/*  LoRa FeatherWing Beacon Mode Example Program
 *  By: Dan Watson | syncchannel.blogspot.com
 *  Date: 2-23-2016
 *  Version: 0.2
 *  
 *  Example Beacon Mode Program for the LoRa FeatherWing for Adafruit Feather
 *  Tested with Feather M0, Feather 32U4 and Feather HUZZAH
 *  
 *  This program configures the Feather as a transmit-only beacon. It transmits a payload of data
 *  at a set interval using the LoRa long range wireless protocol. This program is intended as

SyncChannel

/*  LoRa FeatherWing Tranceiver Mode Example Program
 *  By: Dan Watson | syncchannel.blogspot.com
 *  Date: 2-23-2016
 *  Version: 0.2
 *  
 *  Example Tranceiver Mode Program for the LoRa FeatherWing for Adafruit Feather
 *  Tested with Feather M0, Feather 32U4 and Feather HUZZAH
 *  
 *  This program configures the Feather as a LoRa receiver. It is intended as a companion
 *  to the LoRA FeatherWing Beacon Example Program, and can receive the beacon messages.

SyncChannel

// Example Program for MightyOhm Geiger Counter FeatherWing + OLED Upgrade
// This example is specifically for use with Adafruit Feather HUZZAH (ESP8266)
// It will also work with other Feather boards with modifications
//
// By: Dan Watson
// syncchannel.blogspot.com
// 1/31/2016

// This program makes use of the EspSoftSerial library to receive data from the Geiger counter.
// EspSoftwareSerial: https://github.com/scottwday/EspSoftSerial

SyncChannel

// Arduino Speed Test Benchmarking Program
// Original Program Credit: Arduino.cc
// Modified By: Dan Watson
// synchannel.blogspot.com
// 1-29-2015

// This sketch is the speed test portion of the Arduino Show Info program
// http://playground.arduino.cc/Main/ShowInfo

// Certain tests may not compile/run for all boards. Comment them out as necessary:

SyncChannel

// Example Program for MultiNav FeatherWing
// For Adafruit Feather 32U4
//
// By: Dan Watson
// syncchannel.blogspot.com
// 1/25/2016
//

// This program makes use of the TinyGPS++ library to receive the GPS data from the U-Blox
// module, as well as the Sparkfun MPU-6050 library to interact with the MPU-9250 9DOF.

SyncChannel

// Example Program for MultiNav FeatherWing
// For Adafruit Feather M0
//
// By: Dan Watson
// syncchannel.blogspot.com
// 1/25/2016
//

// This program makes use of the TinyGPS++ library to receive the GPS data from the U-Blox
// module, as well as the Sparkfun MPU-6050 library to interact with the MPU-9250 9DOF.