pinephone-boot

U-Boot SPL 2020.10-rc3 (Jan 01 1980 - 00:00:00 +0000)
DRAM: 3072 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.3():
NOTICE:  BL31: Built : 00:00:00, Jan  1 1980
NOTICE:  BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE:  BL31: Found U-Boot DTB at 0x408a6f8, model: Pine64 PinePhone (1.2)
NOTICE:  PSCI: System suspend is unavailable


U-Boot 2020.10-rc3 (Jan 01 1980 - 00:00:00 +0000) Allwinner Technology

CPU:   Allwinner A64 (SUN50I)
Model: Pine64 PinePhone (1.2)
DRAM:  3 GiB
MMC:   mmc@1c0f000: 0, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
1206 bytes read in 2 ms (588.9 KiB/s)
## Executing script at 4fc00000
****************
* Mobile NixOS *
****************

Built for pine64-pinephone-braveheart

gpio: pin 115 (gpio 115) value is 1
gpio: pin 114 (gpio 114) value is 1
gpio: pin 116 (gpio 116) value is 0
gpio: pin 35 (gpio 35) value is 1
gpio: pin 35 (gpio 35) value is 0
31664640 bytes read in 1354 ms (22.3 MiB/s)
36072 bytes read in 5 ms (6.9 MiB/s)
8596358 bytes read in 370 ms (22.2 MiB/s)
bootargs: console=ttyS0,115200 vt.global_cursor_default=0 earlycon=uart,mmio32,0x01c28000 panic=10 consoleblank=0 loglevel=4
booti 0x40080000 0x4FE00000:832b86 0x4FA00000
Moving Image from 0x40080000 to 0x40200000, end=420b0000
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Ramdisk to 497cd000, end 49fffb86 ... OK
   Loading Device Tree to 00000000497c1000, end 00000000497ccfff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.8.0 (nixbld@localhost) (gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.31.1) #1-mobile-nixos SMP Tue Jan 1 00:00:00 UTC 1980
[    0.000000] Machine model: Pine64 PinePhone (1.2)
[    0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
[    0.000000] printk: bootconsole [uart0] enabled
[    1.883490] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[    1.891253] sun4i-usb-phy 1c19400.phy: Couldn't request VBUS detect GPIO
[    1.898414] sun6i-mipi-dphy 1ca1000.d-phy: Couldn't create the DPHY encoder regmap
[    1.939126] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply
[    2.074079] musb-sunxi 1c19000.usb: Invalid or missing 'dr_mode' property
[    2.104682] no UART detected at 0x1
[    2.108974] genirq: Flags mismatch irq 7. 00000004 (MOTU MTPAV) vs. 00010c04 (arm-pmu)
[    2.116908] MTVAP IRQ 7 busy
[    2.203703] panel-sitronix-st7703 1ca0000.dsi.0: [drm:st7703_probe] *ERROR* mipi_dsi_attach failed (-517). Is host ready?
[    2.940297] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8723cs_xx_fw.bin not found
[    2.962710] scpi_protocol scpi: incorrect or no SCP firmware found
[    3.290304] debugfs: File 'Playback' in directory 'dapm' already present!
[    3.297147] debugfs: File 'Capture' in directory 'dapm' already present!

***************************************
* Mobile NixOS stage-0 script wrapper *
***************************************

Prepping to launch bootlog...
(Preparing /dev for /dev/pts)
(Preparing /dev/pts to identify console)
Early logging started...

***************************************
* Continuing with stage-1...          *
***************************************

I, [1970-01-01T00:08:11.663824 #1]  INFO -- : ************************
I, [1970-01-01T00:08:11.664081 #1]  INFO -- : * Mobile NixOS stage-1 *
I, [1970-01-01T00:08:11.664191 #1]  INFO -- : ************************
I, [1970-01-01T00:08:11.664272 #1]  INFO -- : 
I, [1970-01-01T00:08:11.664357 #1]  INFO -- : Built for device pine64-pinephone-braveheart
I, [1970-01-01T00:08:11.664433 #1]  INFO -- : 
I, [1970-01-01T00:08:11.693688 #1]  INFO -- : Running Tasks::Directory(/etc/udev)...
I, [1970-01-01T00:08:11.694067 #1]  INFO -- : Running Tasks::Directory(/var/log)...
I, [1970-01-01T00:08:11.694440 #1]  INFO -- : Running Tasks::Environment...
I, [1970-01-01T00:08:11.695924 #1]  INFO -- : Running Tasks::LoginEnvironment...
I, [1970-01-01T00:08:11.700850 #1]  INFO -- : Running Tasks::Symlink(/proc/mounts, /etc/mtab)...
I, [1970-01-01T00:08:11.701489 #1]  INFO -- : Running Tasks::Target<Environment>...
I, [1970-01-01T00:08:11.811264 #1]  INFO -- : Running Tasks::Mount(devtmpfs, /dev, {:type=>"devtmpfs", :options=>["nosuid", "strictatime", "mode=755", "size=5%"]})...
I, [1970-01-01T00:08:11.828296 #1]  INFO -- : Running Tasks::Mount(proc, /proc, {:type=>"proc", :options=>["nosuid", "noexec", "nodev"]})...
I, [1970-01-01T00:08:11.843886 #1]  INFO -- : Running Tasks::Mount(sysfs, /sys, {:type=>"sysfs", :options=>["nosuid", "noexec", "nodev"]})...
I, [1970-01-01T00:08:11.850320 #1]  INFO -- : Running Tasks::Mount(tmpfs, /dev/shm, {:type=>"tmpfs", :options=>["nosuid", "nodev", "strictatime", "mode=1777", "size=50%"]})...
I, [1970-01-01T00:08:11.858246 #1]  INFO -- : Running Tasks::Mount(tmpfs, /run, {:type=>"tmpfs", :options=>["nosuid", "nodev", "strictatime", "mode=755", "size=25%"]})...
I, [1970-01-01T00:08:11.866774 #1]  INFO -- : Running Tasks::Mount(tmpfs, /run/wrappers, {:type=>"tmpfs", :options=>["nodev"]})...
I, [1970-01-01T00:08:11.874618 #1]  INFO -- : Running Tasks::UDev...
--daemon: line 1: systemd-udevd: not found
The framebuffer device was opened successfully.
720x1440, 32bpp
The framebuffer device was mapped to memory successfully.
HAL DPI: 200
HAL DPI: Using Roboto 28
Device axp20x-pek
  - x_min: 0, x_max: 0
  - y_min: 0, y_max: 0
Device 1c21800.lradc
  - x_min: 0, x_max: 0
  - y_min: 0, y_max: 0
Device gpio-vibrator
  - x_min: 0, x_max: 0
  - y_min: 0, y_max: 0
Device Goodix Capacitive TouchScreen
  - x_min: 0, x_max: 719
  - y_min: 0, y_max: 1439
Device gpio-keys
  - x_min: 0, x_max: 0
  - y_min: 0, y_max: 0
[HACK] Creating LVGL::LVContainer as screen. (Switching lv_disp_load_scr!)
F, [1970-01-01T00:08:12.945377 #1] FATAL -- : ********************
F, [1970-01-01T00:08:12.945649 #1] FATAL -- : ********************
F, [1970-01-01T00:08:12.945816 #1] FATAL -- : ********************
F, [1970-01-01T00:08:12.945956 #1] FATAL -- : Handling exception
F, [1970-01-01T00:08:12.946129 #1] FATAL -- : Command not found... `systemd-udevd --daemon` (127) (System::CommandNotFound)
F, [1970-01-01T00:08:12.946268 #1] FATAL -- : `init` will exit and the kernel will crash.
F, [1970-01-01T00:08:12.946396 #1] FATAL -- : ********************
[    6.532570] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00006300
[    6.540243] CPU: 0 PID: 1 Comm: loader Not tainted 5.8.0 #1-mobile-nixos
[    6.546937] Hardware name: Pine64 PinePhone (1.2) (DT)
[    6.552070] Call trace:
[    6.554533]  dump_backtrace+0x0/0x1c8
[    6.558201]  show_stack+0x14/0x20
[    6.561521]  dump_stack+0xbc/0x118
[    6.564928]  panic+0x148/0x310
[    6.567984]  do_exit+0x974/0x978
[    6.571212]  do_group_exit+0x40/0xa8
[    6.574788]  __arm64_sys_exit_group+0x14/0x18
[    6.579145]  el0_svc_common.constprop.0+0x68/0x160
[    6.583931]  do_el0_svc+0x20/0x80
[    6.587245]  el0_sync_handler+0x88/0x190
[    6.591163]  el0_sync+0x140/0x180
[    6.594480] SMP: stopping secondary CPUs
[    6.598403] Kernel Offset: disabled
[    6.601889] CPU features: 0x240002,24002004
[    6.606065] Memory Limit: none
[    6.609136] Rebooting in 10 seconds..