bisectable6

query

my $x := (my $y := $x); say $x.WHAT

result

Bisecting: 1705 revisions left to test after this (roughly 11 steps)
[1628e485df1356ae51513009863998daacceffea] Fix over-assuming optimization of R.
»»»»» Testing 1628e485df1356ae51513009863998daacceffea
»»»»» Script output:
(Mu)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 631a36cbe32c98fba05582f15b58380f1a93cc79
»»»»» Script output:
(Mu)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 6952bec37dd314bad5128541deee44bdf9f15f7c
»»»»» Script output:

»»»»» Script exit code: 0
»»»»» Script exit signal: 11 (SIGSEGV)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 11 (SIGSEGV), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 31eb5ce5e46048056e446f2781c6f94e7cfa34c5
»»»»» Script output:

»»»»» Script exit code: 0
»»»»» Script exit signal: 11 (SIGSEGV)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 11 (SIGSEGV), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 674186e814a6168d45067697969d5e92fef7bd8f
»»»»» Script output:
(Mu)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing ae43baa96456b62215e4a30e06ff0ad5d2d308db
»»»»» Script output:

»»»»» Script exit code: 0
»»»»» Script exit signal: 11 (SIGSEGV)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 11 (SIGSEGV), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 0287290dd114cb00cd90d51d381b2b90b9c3e0f3
»»»»» Script output:

»»»»» Script exit code: 0
»»»»» Script exit signal: 11 (SIGSEGV)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 11 (SIGSEGV), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 935059ffb5a239d958cbc3ef57f4fd76e9f1e269
»»»»» Script output:

»»»»» Script exit code: 0
»»»»» Script exit signal: 11 (SIGSEGV)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 11 (SIGSEGV), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing d1eeb3829f0a5930955e5bf587fc6da0aae697c6
»»»»» Script output:

»»»»» Script exit code: 0
»»»»» Script exit signal: 11 (SIGSEGV)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 11 (SIGSEGV), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a4522447c63c67d0ee4b560acabf5e071dc4acb8
»»»»» Script output:
(Mu)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 4f3f1c8f220c78ce545b5856675c7a1d8f8c601c
»»»»» Script output:
(Mu)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing ae2ae92330e5b861b47500de0d8b0855297757a3
»»»»» Script output:
(Mu)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 11 (SIGSEGV)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
ae2ae92330e5b861b47500de0d8b0855297757a3 is the first new commit
commit ae2ae92330e5b861b47500de0d8b0855297757a3
Author: jnthn <jnthn@jnthn.net>
Date:   Wed Apr 13 15:04:51 2016 +0200

    Bump NQP_REVISION.
    
    To get a MoarVM with fixes for the UTF8-C8 encoding and a couple of
    other crashes.

:040000 040000 6d471caa776be7f9f142e4fbb2a54717fb01670f e1d0a3ad870216343607b6f9e9b0f4ff48b55ac0 M	tools