Created
October 23, 2024 23:33
-
-
Save acmeplus/5023981d2d3fd8124262a05b7a851228 to your computer and use it in GitHub Desktop.
GDK Bubble boot
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| DDR V1.18 f366f69a7d typ 23/07/17-15:48:58 | |
| ln | |
| LP4/4x derate en, other dram:1x trefi | |
| ddrconfig:0 | |
| LP4 MR14:0x4d | |
| LPDDR4, 324MHz | |
| BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB | |
| tdqss: cs0 dqs0: 48ps, dqs1: -48ps, dqs2: -24ps, dqs3: -144ps, | |
| change to: 324MHz | |
| clk skew:0x61 | |
| change to: 528MHz | |
| clk skew:0x58 | |
| change to: 780MHz | |
| clk skew:0x58 | |
| change to: 1560MHz(final freq) | |
| PHY drv:clk:38,ca:38,DQ:30,odt:60 | |
| vrefinner:16%, vrefout:29% | |
| dram drv:40,odt:80 | |
| vref_ca:00000068 | |
| clk skew:0x1c | |
| cs 0: | |
| the read training result: | |
| DQS0:0x35, DQS1:0x33, DQS2:0x37, DQS3:0x35, | |
| min :0x12 0x12 0x13 0x10 0x2 0x6 0xa 0x7 , 0x8 0x7 0x3 0x1 0xd 0xe 0x10 0xa , | |
| 0x16 0x15 0x11 0x10 0x5 0x2 0x4 0x6 ,0x13 0xa 0xb 0x2 0x16 0x13 0x13 0x13 , | |
| mid :0x2c 0x2d 0x2e 0x2c 0x1d 0x20 0x24 0x20 ,0x22 0x21 0x1e 0x1b 0x26 0x27 0x28 0x26 , | |
| 0x2f 0x2f 0x29 0x27 0x1e 0x1c 0x1d 0x1f ,0x2d 0x25 0x25 0x1e 0x30 0x2f 0x2c 0x2c , | |
| max :0x46 0x49 0x4a 0x48 0x38 0x3b 0x3e 0x3a ,0x3d 0x3c 0x39 0x36 0x40 0x41 0x41 0x42 , | |
| 0x49 0x49 0x41 0x3f 0x37 0x36 0x37 0x39 ,0x47 0x41 0x3f 0x3a 0x4b 0x4b 0x46 0x46 , | |
| range:0x34 0x37 0x37 0x38 0x36 0x35 0x34 0x33 ,0x35 0x35 0x36 0x35 0x33 0x33 0x31 0x38 , | |
| 0x33 0x34 0x30 0x2f 0x32 0x34 0x33 0x33 ,0x34 0x37 0x34 0x38 0x35 0x38 0x33 0x33 , | |
| the write training result: | |
| DQS0:0x25, DQS1:0x13, DQS2:0x18, DQS3:0x0, | |
| min :0x77 0x7b 0x7d 0x77 0x6a 0x6c 0x73 0x73 0x71 ,0x60 0x60 0x5a 0x57 0x65 0x66 0x69 0x67 0x60 , | |
| 0x6d 0x6c 0x67 0x67 0x5c 0x5c 0x5e 0x65 0x65 ,0x53 0x52 0x4f 0x47 0x57 0x59 0x57 0x5a 0x51 , | |
| mid :0x91 0x94 0x97 0x90 0x83 0x87 0x8b 0x8b 0x89 ,0x7c 0x7b 0x74 0x72 0x80 0x7f 0x82 0x80 0x7a , | |
| 0x87 0x87 0x81 0x7f 0x77 0x75 0x78 0x7d 0x7d ,0x6f 0x6c 0x69 0x62 0x72 0x74 0x71 0x76 0x6c , | |
| max :0xac 0xae 0xb1 0xaa 0x9d 0xa2 0xa4 0xa4 0xa2 ,0x99 0x96 0x8f 0x8d 0x9b 0x98 0x9b 0x9a 0x94 , | |
| 0xa2 0xa3 0x9b 0x98 0x92 0x8e 0x92 0x96 0x96 ,0x8b 0x87 0x84 0x7d 0x8d 0x8f 0x8b 0x92 0x88 , | |
| range:0x35 0x33 0x34 0x33 0x33 0x36 0x31 0x31 0x31 ,0x39 0x36 0x35 0x36 0x36 0x32 0x32 0x33 0x34 , | |
| 0x35 0x37 0x34 0x31 0x36 0x32 0x34 0x31 0x31 ,0x38 0x35 0x35 0x36 0x36 0x36 0x34 0x38 0x37 , | |
| CA Training result: | |
| cs:0 min :0x55 0x50 0x4b 0x3f 0x4c 0x3e 0x4a ,0x53 0x46 0x4c 0x3e 0x4a 0x37 0x4a , | |
| cs:0 mid :0x8d 0x92 0x85 0x7f 0x84 0x81 0x73 ,0x8c 0x88 0x84 0x7f 0x80 0x7b 0x73 , | |
| cs:0 max :0xc6 0xd4 0xbf 0xc0 0xbd 0xc4 0x9d ,0xc5 0xcb 0xbd 0xc0 0xb6 0xbf 0x9d , | |
| cs:0 range:0x71 0x84 0x74 0x81 0x71 0x86 0x53 ,0x72 0x85 0x71 0x82 0x6c 0x88 0x53 , | |
| out | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-g7ff3b5282c-dirty #root (Aug 17 2024 - 14:33:46) | |
| Trying to boot from MMC1 | |
| MMC error: The cmd index is 0, ret is -110 | |
| mmc_init: -110, time 5 | |
| spl: mmc init failed with error: -110 | |
| Trying to boot from MMC2 | |
| ## Verified-boot: 0 | |
| ## Checking atf-1 0x00040000 ... sha256(2f01bd8955...) + OK | |
| ## Checking uboot 0x00a00000 ... sha256(651f0bbb89...) + OK | |
| ## Checking fdt 0x00b23500 ... sha256(4ff5633e93...) + OK | |
| ## Checking atf-2 0xfdcc9000 ... sha256(f1fecab971...) + OK | |
| ## Checking atf-3 0xfdcd0000 ... sha256(d7aa45eb18...) + OK | |
| ## Checking optee 0x08400000 ... sha256(b8cddafab0...) + OK | |
| Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000) | |
| Total: 325.706 ms | |
| INFO: Preloader serial: 2 | |
| NOTICE: BL31: v2.3():v2.3-152-g4e725b15f:cl | |
| NOTICE: BL31: Built : 10:51:13, Jul 15 2021 | |
| INFO: GICv3 without legacy support detected. | |
| INFO: ARM GICv3 driver initialized in EL3 | |
| INFO: pmu v1 is valid | |
| INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz | |
| INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz | |
| INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz | |
| INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz | |
| INFO: Using opteed sec cpu_context! | |
| INFO: boot cpu mask: 0 | |
| INFO: BL31: Initializing runtime services | |
| INFO: BL31: Initializing BL32 | |
| I/TC: | |
| I/TC: Start rockchip platform init | |
| I/TC: Rockchip release version: 1.0 | |
| I/TC: OP-TEE version: 3.6.0-307-g0b06ae94 #1 Fri May 7 01:52:27 UTC 2021 aarch64 | |
| I/TC: Initialized | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0xa00000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-g7ff3b5282c-dirty #root (Aug 17 2024 - 14:33:46 +0530) | |
| Model: GameKiddy GKDmini PRO UBOOT-1 | |
| PreSerial: 2, raw, 0xfe660000 | |
| DRAM: 1006 MiB | |
| Sysmem: init | |
| Relocation Offset: 3d254000 | |
| Relocation fdt: 3b9f91f0 - 3b9fecf0 | |
| CR: M/C/I | |
| no mmc device at slot 1 | |
| dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0 | |
| Bootdev(atags): mmc 1 | |
| MMC1: Legacy, 52Mhz | |
| PartType: DOS | |
| SF: Detected sfc_nor with page size 256 Bytes, erase size 4 KiB, total 8 MiB | |
| SF: Detected sfc_nor with page size 256 Bytes, erase size 4 KiB, total 8 MiB | |
| device 0 offset 0x5f4000, size 0x32000 | |
| SF: 204800 bytes @ 0x5f4000 Read: OK | |
| I2c0 speed: 100000Hz | |
| PMIC: RK8090 (on=0x40, off=0x00) | |
| vdd_logic init 900000 uV | |
| vdd_gpu init 900000 uV | |
| vdd_npu init 900000 uV | |
| io-domain: OK | |
| Invalid bus 4 (err=-19) | |
| *** Warning - spi_flash_probe() failed, using default environment | |
| MMC: Could not find baseparameter partition | |
| Model: GameKiddy GKD Geek UBOOT | |
| No misc partition | |
| boot mode: None | |
| mode: uboot=1, android=0; exit: soc=5%, voltage=3650mv; | |
| lp_voltage=3350%, screen_on=3350mv | |
| Get UCLASS RTC failed: -96 | |
| Enable charge animation display | |
| Exit charge: battery is not exist | |
| No resource partition | |
| No file: logo.bmp | |
| failed to display uboot logo | |
| CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) | |
| apll 816000 KHz | |
| dpll 780000 KHz | |
| gpll 1188000 KHz | |
| cpll 1000000 KHz | |
| npll 1200000 KHz | |
| vpll 24000 KHz | |
| hpll 24000 KHz | |
| ppll 200000 KHz | |
| armclk 816000 KHz | |
| aclk_bus 150000 KHz | |
| pclk_bus 100000 KHz | |
| aclk_top_high 500000 KHz | |
| aclk_top_low 400000 KHz | |
| hclk_top 150000 KHz | |
| pclk_top 100000 KHz | |
| aclk_perimid 300000 KHz | |
| hclk_perimid 150000 KHz | |
| pclk_pmu 100000 KHz | |
| Exit charge: battery is not exist | |
| Rockchip UBOOT DRM driver version: v1.0.1 | |
| VOP have 1 active VP | |
| vp0 have layer nr:6[0 2 4 1 3 5 ], primary plane: 4 | |
| vp1 have layer nr:0[], primary plane: 0 | |
| vp2 have layer nr:0[], primary plane: 0 | |
| Using display timing dts | |
| dsi@fe060000: detailed mode clock 27000 kHz, flags[8000000a] | |
| H: 0640 0771 0773 0900 | |
| V: 0480 0493 0495 0500 | |
| bus_format: 100e | |
| VOP update mode to: 640x480p0, type: MIPI0 for VP0 | |
| VOP VP0 enable Smart0[640x480->640x480@0x0] fmt[1] addr[0x3de00000] | |
| final DSI-Link bandwidth: 360 Mbps x 2 | |
| device 0 offset 0x626000, size 0x32000 | |
| SF: 204800 bytes @ 0x626000 Read: OK | |
| Uncompressed size: 921656 = 0xE1038 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| Net: No ethernet found. | |
| Hit key to stop autoboot('CTRL+C'): 0 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| Scanning mmc 1:1... | |
| Found U-Boot script /boot.scr | |
| reading /boot.scr | |
| 2839 bytes read in 1 ms (2.7 MiB/s) | |
| ## Executing script at 00c00000 | |
| Boot script loaded from mmc 1 | |
| reading /uEnv.txt | |
| 326 bytes read in 1 ms (318.4 KiB/s) | |
| ** Unable to read file / ** | |
| reading /Image | |
| 18935816 bytes read in 1570 ms (11.5 MiB/s) | |
| reading /dtbs/4.19.193-51-rockchip-gb2c01b3d79f2/rockchip/rk3566-gkd-geek-bbg.dtb | |
| 145619 bytes read in 18 ms (7.7 MiB/s) | |
| reading /dtbs/4.19.193-51-rockchip-gb2c01b3d79f2/rockchip/overlay/rk3568-fiq-debugger-uart2m0.dtbo | |
| 513 bytes read in 5 ms (99.6 KiB/s) | |
| Applying kernel provided DT overlay rk3568-fiq-debugger-uart2m0.dtbo | |
| reading /dtbs/4.19.193-51-rockchip-gb2c01b3d79f2/rockchip/overlay/rk3568-disable-npu.dtbo | |
| 648 bytes read in 5 ms (126 KiB/s) | |
| Applying kernel provided DT overlay rk3568-disable-npu.dtbo | |
| reading /dtbs/4.19.193-51-rockchip-gb2c01b3d79f2/rockchip/overlay/rockchip-fixup.scr | |
| 1322 bytes read in 6 ms (214.8 KiB/s) | |
| Applying kernel provided DT fixup script (rockchip-fixup.scr) | |
| ## Executing script at 02000000 | |
| initrdsize = | |
| Fdt Ramdisk skip relocation | |
| ## Flattened Device Tree blob at 0x0a100000 | |
| Booting using the fdt blob at 0x0a100000 | |
| reserving fdt memory region: addr=a100000 size=89000 | |
| 'reserved-memory' ramoops@110000: addr=110000 size=f0000 | |
| Using Device Tree in place at 000000000a100000, end 000000000a18bfff | |
| reserve drm-loader-logo offset = 6588 | |
| reserve drm-logo mem = 000000003de00000, size = 3325952 | |
| Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) | |
| Adding bank: 0x09400000 - 0x40000000 (size: 0x36c00000) | |
| Total: 2483.672 ms | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] | |
| [ 0.000000] Linux version 4.19.193-g5a07852a55cf-dirty (root@avrman-virtual-machine) (gcc version 13.3.1 20240614 (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)), GNU ld (Arm GNU Toolchain 13.3.Rel1 (Build arm-14 | |
| [ 0.000000] Machine model: GameKiddy GKD Geek | |
| [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 0.000000] cma: Reserved 16 MiB at 0x000000003f000000 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 22 pages/cpu s49816 r8192 d32104 u90112 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 253448 | |
| [ 0.000000] Kernel command line: initrd= root=UUID=ef9541cf-1e93-486b-bc48-c149e15900c2 rootwait rw rootfstype=ext4 console=ttyFIQ0 panic=10 consoleblank=0 loglevel=7 cgroup_enable=cpuset cgroup_memory=1 cgroue | |
| [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 971056K/1030144K available (11710K kernel code, 828K rwdata, 2648K rodata, 3264K init, 1715K bss, 42704K reserved, 16384K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support | |
| [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] | |
| [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @230000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @240000 (flat, esz 2, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GIC: using LPI property table @0x0000000000250000 | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 | |
| [ 0.000000] CPU0: using LPI pending table @0x0000000000260000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] random: random: get_random_bytes called from 0xffffff8008e90b48 with crng_init=0 | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.001172] Console: colour dummy device 80x25 | |
| [ 0.001211] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) | |
| [ 0.001224] pid_max: default: 32768 minimum: 301 | |
| [ 0.001397] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) | |
| [ 0.001412] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) | |
| [ 0.002938] ASID allocator initialised with 32768 entries | |
| [ 0.003050] rcu: Hierarchical SRCU implementation. | |
| [ 0.004877] Platform MSI: interrupt-controller@fd440000 domain created | |
| [ 0.005624] smp: Bringing up secondary CPUs ... | |
| [ 0.006189] Detected VIPT I-cache on CPU1 | |
| [ 0.006224] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 | |
| [ 0.006276] CPU1: using LPI pending table @0x000000003e570000 | |
| [ 0.006323] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] | |
| [ 0.006970] Detected VIPT I-cache on CPU2 | |
| [ 0.006998] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 | |
| [ 0.007048] CPU2: using LPI pending table @0x000000003e5c0000 | |
| [ 0.007085] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] | |
| [ 0.007699] Detected VIPT I-cache on CPU3 | |
| [ 0.007723] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 | |
| [ 0.007769] CPU3: using LPI pending table @0x000000003e5e0000 | |
| [ 0.007803] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] | |
| [ 0.007898] smp: Brought up 1 node, 4 CPUs | |
| [ 0.007935] SMP: Total of 4 processors activated. | |
| [ 0.007944] CPU features: detected: GIC system register CPU interface | |
| [ 0.007949] CPU features: detected: Privileged Access Never | |
| [ 0.007956] CPU features: detected: LSE atomic instructions | |
| [ 0.007961] CPU features: detected: User Access Override | |
| [ 0.007966] CPU features: detected: 32-bit EL0 Support | |
| [ 0.007972] CPU features: detected: RAS Extension Support | |
| [ 0.008104] CPU: All CPU(s) started at EL2 | |
| [ 0.008132] alternatives: patching kernel code | |
| [ 0.014613] devtmpfs: initialized | |
| [ 0.038637] Registered cp15_barrier emulation handler | |
| [ 0.038658] Registered setend emulation handler | |
| [ 0.038882] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns | |
| [ 0.038902] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| [ 0.039503] pinctrl core: initialized pinctrl subsystem | |
| [ 0.040220] NET: Registered protocol family 16 | |
| [ 0.043404] cpuidle: using governor menu | |
| [ 0.043442] Registered FIQ tty driver | |
| [ 0.043728] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.045078] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.048388] console [pstore-1] enabled | |
| [ 0.048397] pstore: Registered ramoops as persistent store backend | |
| [ 0.048407] ramoops: attached 0xf0000@0x110000, ecc: 0/0 | |
| [ 0.075452] rockchip-gpio fdd60000.gpio: probed gpio0 (fdd60000.gpio) | |
| [ 0.076036] rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio) | |
| [ 0.076591] rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio) | |
| [ 0.077123] rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio) | |
| [ 0.077703] rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio) | |
| [ 0.077839] rockchip-pinctrl pinctrl: probed pinctrl | |
| [ 0.087366] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.089276] console [ttyFIQ0] enabled | |
| [ 0.089497] Registered fiq debugger ttyFIQ0 | |
| [ 0.090281] vcc3v3_sys: supplied by vcc_sys | |
| [ 0.090540] vcc3v3: supplied by vcc3v3_sys | |
| [ 0.091375] rk_iommu fdea0800.iommu: version = 2 | |
| [ 0.091871] rk_iommu fded0480.iommu: version = 2 | |
| [ 0.092300] rk_iommu fdee0800.iommu: version = 2 | |
| [ 0.092675] rk_iommu fdef0800.iommu: version = 2 | |
| [ 0.093017] rk_iommu fdf40f00.iommu: version = 2 | |
| [ 0.093435] rk_iommu fdf80800.iommu: version = 2 | |
| [ 0.093780] rk_iommu fe043e00.iommu: version = 2 | |
| [ 0.094593] SCSI subsystem initialized | |
| [ 0.094840] usbcore: registered new interface driver usbfs | |
| [ 0.094908] usbcore: registered new interface driver hub | |
| [ 0.094965] usbcore: registered new device driver usb | |
| [ 0.095091] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.095109] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.095142] PTP clock support registered | |
| [ 0.095466] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 | |
| [ 0.097211] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.098203] rockchip-cpuinfo cpuinfo: SoC : 35662000 | |
| [ 0.098230] rockchip-cpuinfo cpuinfo: Serial : f9bd9de5db0595ea | |
| [ 0.098800] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.098950] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.099035] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.108490] thermal thermal_zone1: power_allocator: sustainable_power will be estimated | |
| [ 0.108869] NET: Registered protocol family 2 | |
| [ 0.109611] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes) | |
| [ 0.109647] TCP established hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.109735] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) | |
| [ 0.109864] TCP: Hash tables configured (established 8192 bind 8192) | |
| [ 0.109992] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.110035] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.110237] NET: Registered protocol family 1 | |
| [ 0.229197] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available | |
| [ 0.231042] Initialise system trusted keyrings | |
| [ 0.231242] workingset: timestamp_bits=45 max_order=18 bucket_order=0 | |
| [ 0.238773] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.239006] exFAT: file-system version 2.2.0-3arter97 | |
| [ 0.239337] ntfs: driver 2.1.32 [Flags: R/W]. | |
| [ 0.242341] NET: Registered protocol family 38 | |
| [ 0.242370] Key type asymmetric registered | |
| [ 0.242381] Asymmetric key parser 'x509' registered | |
| [ 0.242427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
| [ 0.242447] io scheduler noop registered | |
| [ 0.242462] io scheduler deadline registered | |
| [ 0.242692] io scheduler cfq registered (default) | |
| [ 0.242714] io scheduler mq-deadline registered | |
| [ 0.242729] io scheduler kyber registered | |
| [ 0.245025] phy phy-fe8a0000.usb2-phy.1: No vbus specified for otg port | |
| [ 0.246494] extcon extcon1: failed to create extcon usb2-phy link | |
| [ 0.246792] phy phy-fe8b0000.usb2-phy.3: No vbus specified for otg port | |
| [ 0.252898] pwm-backlight backlight: backlight supply power not found, using dummy regulator | |
| [ 0.252952] pwm-backlight backlight: Linked as a consumer to regulator.0 | |
| [ 0.253206] mpp_service mpp-srv: eccf16e83556 author: Finley Xiao 2021-07-05 soc: rockchip: opp_select: Export rockchip_nvmem_cell_read_u8/u16() | |
| [ 0.253221] mpp_service mpp-srv: probe start | |
| [ 0.254014] iommu: Adding device fdf40000.rkvenc to group 4 | |
| [ 0.254057] mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to fdf40f00.iommu | |
| [ 0.254280] mpp_rkvenc fdf40000.rkvenc: probing start | |
| [ 0.254790] mpp_rkvenc fdf40000.rkvenc: no regulator, devfreq is disabled | |
| [ 0.255134] mpp_rkvenc fdf40000.rkvenc: probing finish | |
| [ 0.256040] iommu: Adding device fdea0400.vdpu to group 0 | |
| [ 0.256085] mpp_vdpu2 fdea0400.vdpu: Linked as a consumer to fdea0800.iommu | |
| [ 0.256273] mpp_vdpu2 fdea0400.vdpu: probe device | |
| [ 0.256844] mpp_vdpu2 fdea0400.vdpu: probing finish | |
| [ 0.257256] iommu: Adding device fdee0000.vepu to group 2 | |
| [ 0.257295] mpp_vepu2 fdee0000.vepu: Linked as a consumer to fdee0800.iommu | |
| [ 0.257499] mpp_vepu2 fdee0000.vepu: probe device | |
| [ 0.258043] mpp_vepu2 fdee0000.vepu: probing finish | |
| [ 0.258472] iommu: Adding device fdef0000.iep to group 3 | |
| [ 0.258511] mpp-iep2 fdef0000.iep: Linked as a consumer to fdef0800.iommu | |
| [ 0.258676] mpp-iep2 fdef0000.iep: probe device | |
| [ 0.259195] mpp-iep2 fdef0000.iep: allocate roi buffer failed | |
| [ 0.259386] mpp-iep2 fdef0000.iep: probing finish | |
| [ 0.259793] iommu: Adding device fded0000.jpegd to group 1 | |
| [ 0.259824] mpp_jpgdec fded0000.jpegd: Linked as a consumer to fded0480.iommu | |
| [ 0.259994] mpp_jpgdec fded0000.jpegd: probe device | |
| [ 0.260530] mpp_jpgdec fded0000.jpegd: probing finish | |
| [ 0.260950] iommu: Adding device fdf80200.rkvdec to group 5 | |
| [ 0.260989] mpp_rkvdec2 fdf80200.rkvdec: Linked as a consumer to fdf80800.iommu | |
| [ 0.261244] mpp_rkvdec2 fdf80200.rkvdec: probing start | |
| [ 0.261722] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found! | |
| [ 0.261737] rkvdec2_init:875: No niu aclk reset resource define | |
| [ 0.261762] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found! | |
| [ 0.261777] rkvdec2_init:878: No niu hclk reset resource define | |
| [ 0.262091] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000 | |
| [ 0.262114] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000 | |
| [ 0.262166] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056 | |
| [ 0.262187] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536 | |
| [ 0.262205] mpp_rkvdec2 fdf80200.rkvdec: min_width 512 | |
| [ 0.262238] mpp_rkvdec2 fdf80200.rkvdec: probing finish | |
| [ 0.262495] mpp_service mpp-srv: probe success | |
| [ 0.268464] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330 | |
| [ 0.268500] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 0.270988] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330 | |
| [ 0.271008] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 0.272607] rockchip-system-monitor rockchip-system-monitor: system monitor probe | |
| [ 0.273378] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled | |
| [ 0.274220] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 46, base_baud = 1500000) is a 16550A | |
| [ 0.276428] random: fast init done | |
| [ 0.276734] random: crng init done | |
| [ 0.276898] iommu: Adding device fe040000.vop to group 6 | |
| [ 0.276942] rockchip-vop2 fe040000.vop: Linked as a consumer to fe043e00.iommu | |
| [ 0.280640] rockchip-drm display-subsystem: Linked as a consumer to fe040000.vop | |
| [ 0.281776] rockchip-drm display-subsystem: Linked as a consumer to fe060000.dsi | |
| [ 0.282822] rockchip-drm display-subsystem: dmc is disabled | |
| [ 0.283119] rockchip-vop2 fe040000.vop: [drm:0xffffff8008623e94] vp0 assign plane mask: 0x0, primary plane phy id: -1 | |
| [ 0.283150] rockchip-vop2 fe040000.vop: [drm:0xffffff8008623e94] vp1 assign plane mask: 0x0, primary plane phy id: -1 | |
| [ 0.283174] rockchip-vop2 fe040000.vop: [drm:0xffffff8008623e94] vp2 assign plane mask: 0x0, primary plane phy id: -1 | |
| [ 0.283469] [drm] unsupported AFBC format[3432564e] | |
| [ 0.283534] [drm] failed to init overlay plane Cluster0-win1 | |
| [ 0.283601] [drm] failed to init overlay plane Cluster1-win1 | |
| [ 0.283868] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008ca8f00) | |
| [ 0.283918] dw-mipi-dsi fe060000.dsi: [drm:0xffffff8008637ec8] *ERROR* Failed to find panel or bridge: -517 | |
| [ 0.287748] panel-simple-dsi fe060000.dsi.0: Linked as a consumer to regulator.4 | |
| [ 0.287811] panel-simple-dsi fe060000.dsi.0: fe060000.dsi.0 supply vsp not found, using dummy regulator | |
| [ 0.287852] panel-simple-dsi fe060000.dsi.0: Linked as a consumer to regulator.0 | |
| [ 0.287898] panel-simple-dsi fe060000.dsi.0: fe060000.dsi.0 supply vsn not found, using dummy regulator | |
| [ 0.288762] mali fde60000.gpu: Kernel DDK version g2p0-01eac0 | |
| [ 0.288899] mali fde60000.gpu: Power management initialization failed error = -517 | |
| [ 0.288927] mali fde60000.gpu: Device initialization Deferred | |
| [ 0.289267] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
| [ 0.290114] brd: module loaded | |
| [ 0.295022] loop: module loaded | |
| [ 0.295556] zram: Added device: zram0 | |
| [ 0.295745] Loading iSCSI transport class v2.0-870. | |
| [ 0.296293] iscsi: registered transport (tcp) | |
| [ 0.297891] libphy: Fixed MDIO Bus: probed | |
| [ 0.297947] CAN device driver interface | |
| [ 0.299246] PPP generic driver version 2.4.2 | |
| [ 0.299453] PPP BSD Compression module registered | |
| [ 0.299472] PPP Deflate Compression module registered | |
| [ 0.299513] PPP MPPE Compression module registered | |
| [ 0.299602] usbcore: registered new interface driver rndis_wlan | |
| [ 0.299662] usbcore: registered new interface driver asix | |
| [ 0.299724] usbcore: registered new interface driver cdc_ether | |
| [ 0.299781] usbcore: registered new interface driver rndis_host | |
| [ 0.299843] usbcore: registered new interface driver cdc_ncm | |
| [ 0.299879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 0.299896] ehci-platform: EHCI generic platform driver | |
| [ 0.302188] ehci-platform fd800000.usb: EHCI Host Controller | |
| [ 0.302224] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 | |
| [ 0.302694] ehci-platform fd800000.usb: irq 11, io mem 0xfd800000 | |
| [ 0.315506] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 0.315689] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
| [ 0.315713] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.315732] usb usb1: Product: EHCI Host Controller | |
| [ 0.315748] usb usb1: Manufacturer: Linux 4.19.193-g5a07852a55cf-dirty ehci_hcd | |
| [ 0.315764] usb usb1: SerialNumber: fd800000.usb | |
| [ 0.316316] hub 1-0:1.0: USB hub found | |
| [ 0.316367] hub 1-0:1.0: 1 port detected | |
| [ 0.318978] ehci-platform fd880000.usb: EHCI Host Controller | |
| [ 0.319019] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2 | |
| [ 0.319299] ehci-platform fd880000.usb: irq 13, io mem 0xfd880000 | |
| [ 0.332169] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 0.332363] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
| [ 0.332385] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.332403] usb usb2: Product: EHCI Host Controller | |
| [ 0.332419] usb usb2: Manufacturer: Linux 4.19.193-g5a07852a55cf-dirty ehci_hcd | |
| [ 0.332434] usb usb2: SerialNumber: fd880000.usb | |
| [ 0.332915] hub 2-0:1.0: USB hub found | |
| [ 0.332959] hub 2-0:1.0: 1 port detected | |
| [ 0.333635] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 0.333648] ohci-platform: OHCI generic platform driver | |
| [ 0.333883] ohci-platform fd840000.usb: Generic Platform OHCI controller | |
| [ 0.333920] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3 | |
| [ 0.334143] ohci-platform fd840000.usb: irq 12, io mem 0xfd840000 | |
| [ 0.392993] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 | |
| [ 0.393017] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.393029] usb usb3: Product: Generic Platform OHCI controller | |
| [ 0.393040] usb usb3: Manufacturer: Linux 4.19.193-g5a07852a55cf-dirty ohci_hcd | |
| [ 0.393050] usb usb3: SerialNumber: fd840000.usb | |
| [ 0.393563] hub 3-0:1.0: USB hub found | |
| [ 0.393612] hub 3-0:1.0: 1 port detected | |
| [ 0.394152] ohci-platform fd8c0000.usb: Generic Platform OHCI controller | |
| [ 0.394192] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 | |
| [ 0.394388] ohci-platform fd8c0000.usb: irq 14, io mem 0xfd8c0000 | |
| [ 0.452998] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 | |
| [ 0.453022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.453034] usb usb4: Product: Generic Platform OHCI controller | |
| [ 0.453045] usb usb4: Manufacturer: Linux 4.19.193-g5a07852a55cf-dirty ohci_hcd | |
| [ 0.453055] usb usb4: SerialNumber: fd8c0000.usb | |
| [ 0.453568] hub 4-0:1.0: USB hub found | |
| [ 0.453632] hub 4-0:1.0: 1 port detected | |
| [ 0.454847] usbcore: registered new interface driver usb-storage | |
| [ 0.455037] mousedev: PS/2 mouse device common for all mice | |
| [ 0.455783] usbcore: registered new interface driver xpad | |
| [ 0.456082] pwm-vibrator vibrator: vibrator supply vcc not found, using dummy regulator | |
| [ 0.456123] pwm-vibrator vibrator: Linked as a consumer to regulator.0 | |
| [ 0.456576] i2c /dev entries driver | |
| [ 0.458551] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! | |
| [ 0.462204] vdd_cpu: supplied by vcc_sys | |
| [ 0.463602] rk808 0-0020: chip id: 0x8090 | |
| [ 0.463666] rk808 0-0020: No cache defaults, reading back from HW | |
| [ 0.487329] rk808 0-0020: source: on=0x40, off=0x00 | |
| [ 0.487356] rk808 0-0020: support dcdc3 fb mode:-22, 134461248 | |
| [ 0.487713] rk808 0-0020: support pmic reset mode:0,1 | |
| [ 0.493386] rk808-regulator rk808-regulator: there is no dvs0 gpio | |
| [ 0.493438] rk808-regulator rk808-regulator: there is no dvs1 gpio | |
| [ 0.497249] vdd_logic: supplied by vcc_sys | |
| [ 0.501027] vdd_gpu: supplied by vcc_sys | |
| [ 0.503542] vcc_ddr: supplied by vcc_sys | |
| [ 0.507808] vdd_npu: supplied by vcc_sys | |
| [ 0.509879] vcc_1v8: supplied by vcc_sys | |
| [ 0.510427] vdda0v9_image: Bringing 600000uV into 900000-900000uV | |
| [ 0.515449] vdda0v9_image: supplied by vcc_sys | |
| [ 0.517863] vdda_0v9: supplied by vcc_sys | |
| [ 0.520385] vdda0v9_pmu: supplied by vcc_sys | |
| [ 0.520927] vccio_acodec: Bringing 600000uV into 3000000-3000000uV | |
| [ 0.525947] vccio_acodec: supplied by vcc_sys | |
| [ 0.528827] vccio_sd: supplied by vcc_sys | |
| [ 0.531345] vcc3v3_pmu: supplied by vcc_sys | |
| [ 0.533414] vcca_1v8: supplied by vcc_sys | |
| [ 0.535936] vcca1v8_pmu: supplied by vcc_sys | |
| [ 0.536483] vccio_sd2: Bringing 600000uV into 1800000-1800000uV | |
| [ 0.541961] vccio_sd2: supplied by vcc_sys | |
| [ 0.543089] VCC_SPK_HP: supplied by vcc_sys | |
| [ 0.544547] vcc3v3_sd: supplied by vcc3v3_sys | |
| [ 0.544770] rk817-battery rk817-battery: DMA mask not set | |
| [ 0.544941] rk817-battery rk817-battery: fb_temperature missing! | |
| [ 0.544964] rk817-battery rk817-battery: energy_mode missing! | |
| [ 0.544984] rk817-battery rk817-battery: zero_reserve_dsoc missing! | |
| [ 0.545003] rk817-battery rk817-battery: low_power_sleep missing! | |
| [ 0.545022] rk817-battery rk817-battery: battery design_max_voltage missing! | |
| [ 0.545037] rk817-battery rk817-battery: not have to register chg psy! | |
| [ 0.571495] rk817-bat: initialized yet.. | |
| [ 0.617966] thermal thermal_zone2: power_allocator: sustainable_power will be estimated | |
| [ 0.630037] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1 | |
| [ 0.643077] rk808-rtc rk808-rtc: registered as rtc0 | |
| [ 0.645723] rk808-rtc rk808-rtc: setting system clock to 2017-08-04 09:00:03 UTC (1501837203) | |
| [ 0.647447] gsensor_sc7a20 2-0018: sensor_register_device: gs_sc7a20, id = 20 | |
| [ 0.647478] i2c i2c-2: sensor_probe: gs_sc7a20,00000000368aa2f7 | |
| [ 0.647537] gsensor_sc7a20 2-0018: sensor_chip_init:gs_sc7a20:devid=0x0,ops=0x000000001db3c7ca | |
| [ 0.647555] aaaaa sensor_init:line=1399 | |
| [ 0.647571] sensor_active:reg=0x20,reg_ctrl=0x7,enable=0 | |
| [ 0.648386] sc7a20_chip_id is 17 | |
| [ 0.669416] gsensor_sc7a20 2-0018: sensor_irq_init:use polling,delay=10 ms | |
| [ 0.669443] sensor_active:reg=0x20,reg_ctrl=0x77,enable=1 | |
| [ 0.669797] gsensor_sc7a20 2-0018: sensor on: starting poll sensor data 10ms | |
| [ 0.669976] gsensor_sc7a20 2-0018: sensor_misc_device_register:miscdevice: mma8452_daemon | |
| [ 0.670002] gsensor_sc7a20 2-0018: sensor_probe:initialized ok,sensor name:gs_sc7a20,type:2,id=20 | |
| [ 0.670002] | |
| [ 0.671458] at24 3-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write | |
| [ 0.672783] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.16 | |
| [ 0.673745] rockchip-iodomain fdc20000.syscon:io-domains: pmuio1(3300000 uV) supplied by vcc3v3_pmu | |
| [ 0.675194] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu | |
| [ 0.675712] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.14 | |
| [ 0.676672] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3000000 uV) supplied by vccio_acodec | |
| [ 0.676722] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.3 | |
| [ 0.676753] rockchip-iodomain fdc20000.syscon:io-domains: vccio2(3300000 uV) supplied by vcc3v3 | |
| [ 0.677266] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.15 | |
| [ 0.678224] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd | |
| [ 0.678730] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.10 | |
| [ 0.679679] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8 | |
| [ 0.680192] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.19 | |
| [ 0.681134] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(1800000 uV) supplied by vccio_sd2 | |
| [ 0.682570] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8 | |
| [ 0.682651] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc3v3 | |
| [ 0.685584] bq2589x-2 0-006b: bq2589x_charger_probe: charger device bq25890 detected, revision:1 | |
| [ 0.696489] bq2589x_charger_probe : avrman_otg 18 | |
| [ 0.697122] bq2589x-2 0-006b: bq2589x_charger_probe:irq = 83 | |
| [ 0.699009] rockchip-thermal fe710000.tsadc: tsadc is probed successfully! | |
| [ 0.700293] cpu cpu0: leakage=25 | |
| [ 0.700358] cpu cpu0: pvtm = 85780, from nvmem | |
| [ 0.700385] cpu cpu0: pvtm-volt-sel=1 | |
| [ 0.701148] cpu cpu0: Linked as a consumer to regulator.5 | |
| [ 0.701173] cpu cpu0: Dropping the link to regulator.5 | |
| [ 0.701784] cpu cpu0: Linked as a consumer to regulator.5 | |
| [ 0.701961] cpu cpu0: avs=0 | |
| [ 0.702024] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1 | |
| [ 0.702086] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 | |
| [ 0.706919] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.706941] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.706949] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.707875] dwmmc_rockchip fe000000.dwmmc: IDMAC supports 32-bit address mode. | |
| [ 0.708062] dwmmc_rockchip fe000000.dwmmc: Using internal DMA controller. | |
| [ 0.708087] dwmmc_rockchip fe000000.dwmmc: Version ID is 270a | |
| [ 0.708142] dwmmc_rockchip fe000000.dwmmc: DW MMC controller at irq 34,32 bit host data width,256 deep fifo | |
| [ 0.711317] dwmmc_rockchip fe000000.dwmmc: Linked as a consumer to regulator.21 | |
| [ 0.712287] dwmmc_rockchip fe000000.dwmmc: Linked as a consumer to regulator.19 | |
| [ 0.712816] bq2589x-2 0-006b: bq2589x_charger_irq_workfunc:adapter plugged in | |
| [ 0.712828] bq2589x-2 0-006b: bq2589x_charger_irq_workfunc:charge fault:80 | |
| [ 0.712837] bq2589x-2 0-006b: bq2589x_adapter_in_workfunc:usb dcp adapter plugged in | |
| [ 0.717104] bq2589x-2 0-006b: bq2589x_adapter_in_workfunc: Set charge current to 2000mA successfully | |
| [ 0.719780] bq2589x-2 0-006b: bq2589x_ico_workfunc:ICO command issued successfully | |
| [ 0.730414] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) | |
| [ 0.743585] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode. | |
| [ 0.743987] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller. | |
| [ 0.744007] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a | |
| [ 0.744061] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 35,32 bit host data width,256 deep fifo | |
| [ 0.744652] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.21 | |
| [ 0.745181] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.15 | |
| [ 0.760130] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) | |
| [ 0.773254] dwmmc_rockchip fe2c0000.dwmmc: IDMAC supports 32-bit address mode. | |
| [ 0.774254] dwmmc_rockchip fe2c0000.dwmmc: Using internal DMA controller. | |
| [ 0.774311] dwmmc_rockchip fe2c0000.dwmmc: Version ID is 270a | |
| [ 0.774416] dwmmc_rockchip fe2c0000.dwmmc: DW MMC controller at irq 36,32 bit host data width,256 deep fifo | |
| [ 0.774784] dwmmc_rockchip fe2c0000.dwmmc: allocated mmc-pwrseq | |
| [ 0.774835] mmc_host mmc2: card is non-removable. | |
| [ 0.789590] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) | |
| [ 0.802636] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.805210] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.806174] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 0.807168] usbcore: registered new interface driver usbhid | |
| [ 0.807209] usbhid: USB HID core driver | |
| [ 0.810007] rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.10 | |
| [ 0.811039] optee: probing for conduit method from DT. | |
| [ 0.811065] optee: revision 3.6 (0b06ae94) | |
| [ 0.811473] optee: initialized driver | |
| [ 0.816530] usbcore: registered new interface driver snd-usb-audio | |
| [ 0.817603] rk817-codec rk817-codec: DMA mask not set | |
| [ 0.821367] Initializing XFRM netlink socket | |
| [ 0.821402] NET: Registered protocol family 17 | |
| [ 0.821420] can: controller area network core (rev 20170425 abi 9) | |
| [ 0.821550] NET: Registered protocol family 29 | |
| [ 0.821569] [BT_RFKILL]: Enter rfkill_rk_init | |
| [ 0.821579] [WLAN_RFKILL]: Enter rfkill_wlan_init | |
| [ 0.821884] [WLAN_RFKILL]: Enter rfkill_wlan_probe | |
| [ 0.821923] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6330 | |
| [ 0.985993] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) | |
| mount: mounting /flash on /sysroot/flash failed: No such file or directory | |
| mount: mounting /storage on /sysroot/storage failed: No such file or directory | |
| *** Error in prepare_sysroot: final_check: Could not find systemd! *** | |
| ### Starting debugging shell for boot step: prepare_sysroot... type exit to quit ### | |
| # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment