Skip to content

Instantly share code, notes, and snippets.

@adammw
Created June 16, 2016 14:02
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save adammw/91aa8a982fd62532f24dc58168742e3d to your computer and use it in GitHub Desktop.
Save adammw/91aa8a982fd62532f24dc58168742e3d to your computer and use it in GitHub Desktop.
DGND3700 Boot Code V1.0.8
CFE version 1.0.37-104.4 for BCM96368 (32bit,SP,BE)
Build Date: Mon Feb 21 17:59:46 CST 2011 (finerain@moonlight)
Copyright (C) 2000-2009 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201 size 32768KB
Total Flash size: 32768K with 256 sectors
ethsw: found bcm53115!
Chip ID: BCM6368B2, MIPS: 400MHz
Main Thread: TP0
Total Memory: 134217728 bytes (128MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Dfaulthost fash fie nam bcm96xx_fs_ernel
Boo delay(0-9 econds : 1
Bot imag (0=laest, =previus) :
Board Id (0-11) : 96368MVWG
Number of MAC Addresses (1-32) : 10
Base MAC Address : 84:1b:5e:46:e5:b8
PSI ize (-64) Kytes : 2
Enble Bakup PS [0|1 :
Sstem Lg Size(0-25) KByts :0
Min Thrad Nuber [01] 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xb8020000) ...
Code Address: 0x80A00000, Entry Address: 0x80a00000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80a00000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x80a00000
[ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48532) ) #1 SMP Tue Mar 1 10:07:22 CET 2016
[ 0.000000] Detected Broadcom 0x6368 CPU revision b2
[ 0.000000] CPU frequency is 400 MHz
[ 0.000000] 128MB of RAM installed
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ .00000] bootonsol [earl0] enaledrsion:1.0.37104.4
0.00000]CPU0 rvisio is: 002a031(Broadom BMPS4350
[ 0.000000] MIPS: machine is Netgear DGND370v1/DGD3800B
[ .00000] Detrminedphysial RAMmap:
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x07ffffff]
[ 0.000000] Movable zone start for each node
[ .00000] noe 0:[mem 00000000-0x0ffffff
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache alases, inesiz 16 byes
[ 0.000000] PERCPU: Embedded 9 pages/cpu @81107000 s5456 r8192 d23216 u36864
[ 0.00000] Buit 1 zoelistsin Zoe orde, mobiity grupingon. Ttal paes: 3212
[ 0.00000] ernel omman line: root=dev/mtblock rootftype=suashfsjffs2noinitd consle=tty0,11500
[ 0.000000] Dentry cache hash table entris: 1684 (orer: 4,65536 ytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 124636K/131072K available (2972K kernel code, 144K rwdata, 464K rodata, 1340K init, 198K bss, 6436K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.052000] SMP: Booting CPU1...
[ 0.056000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[ 0.056000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.056000] CPU1 revision is: 0002a031 (Broadcom BMIPS4350)
[ 0.096000] Synchronize counters for CPU 1: done.
[ 0.100000] SMP: CPU1 is running
[ 0.10000] rough up 2 PUs
[ 0.116000] NET: Registered protocol family 16
[ 0.124000] registering PCI controller with io_map_base unset
[ 0.128000] registering PCI controller with io_map_base unset
[ 0.148000] PCI host bridge to bus 0000:00
[ 0.152000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 0.160000] pci_bus 0000:00: root bus resource [io 0x8000000-0x8007fff]
[ 0.168000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.192000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
[ 0.200000] pci 0000:00:02.0: BAR 0: assigned [mem 0x30004000-0x30007fff]
[ 0.208000] PCI host bridge to bus 0000:01
[ 0.212000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[ 0.220000] pci_bus 0000:01: root bus resource [io 0x8008000-0x800ffff]
[ 0.224000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.232000] pci 0000:01:1e.0: bridge configuration ivalid [bus 0-00]),reconigurin
[ 0.244000] pci 0000:1:1e.: BAR 0: assgned [em 0x300000-0x3ffffff]
[ .24800] pci 000:0:1e.0:BAR 7:assignd [io 0x800000-0x0080f]
[ 0.25600] pc 000001:1e.: BAR : assgned [o 0x808400-x8008ff]
[ 0.24000] ci 000:01:1.0: CrdBus ridge o [bus02-05
[ 0.26800] pci0000:1:1e.0 brige widow [i 0x808000-080080f]
[ 0.27000] pi 000:01:1e0: ridge indow io 0x0084000x8004ff]
0.84000 pci 000:01:e.0: bridgewindo [mem x3800000-0x3fffff]
[ 0.292000] Switched to clocksource MIPS
[ 0.296000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[ 0.324000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
[ 0.388000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[ 0.396000] PCI: Enabling device 0000:00:02.0 (0000 -> 000)
[ 0.424000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
[ 0.488000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:02.0
[ 0.496000] NET: Registered protocol family 2
[ 0.504000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.508000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.516000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.524000] TCP: reno registered
[ 0.528000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.532000] UDP-Lit hash able etries 256 (rder: , 819 bytes
[ 0.540000] NET: Registerd protcol fmily 1
[ 0.544000] futex hash table entries: 512 (order: 1, 8192 bytes)
[ 0.552000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.560000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIM) (CMDE_PRIRITY) c) 201-2006Red Ha, Inc.
[ 0.568000] msgmni has been set to 243
[ 0.572000] io scheduler noop registerd
[ 0.57600] i schedler dedline egistred (dfault)
[ 0.584000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10, base_b�[ 0.596000] console [ttyS0] enbled
0.96000 consoe [tty0] enaled
0.04000]bootcosole early0 disabed
[ 0.64000] ootconole [erly0]disabld
[ 0.612000] bcm63xx-rng bcm63xx-rng: registered RNGdrive
[ 0.620000] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
[ 063600] Am/Fujitu Exteded Qery vesion 13.40
[ 0.60000] umber f CFI hips:1
[ 0.644000] bcm63xxpar: CFEboot tg foun with ersio 6 andboardtype 9368MVW
[ 0.65200] 6 cm63xxart prtitios foun on MT devie 1800000.no
[ 0.65600] Crating MTD artitins on 1800000.nor:
[ 0.66400] 000000000000-x0000002000 : "CF"
[ 0.672000] 0x000000020100-0x00000014b5ab : "kernel"
[ 0.676000] 0x00000014b5ab-0x000001e40000 : "rootfs"
[ 0.684000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.692000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.696000] 0x000000380000-0x000001e40000 : "rootfs_data"
[ 0.704000] 0x000000020000-0x000001e40000 : "linux"
[ 0.712000] 0x000001e40000-0x000001fe0000 : "board_data"
[ 0.720000] 0x000001fe0000-0x000002000000 : "nvram"
[ 0.728000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
[ 0.744000] b53_common: found switch: BCM53115, rev 8
[ 0.788000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.796000] TCP: cubic registered
[ 0.800000] NET: Registered protocol family 17
[ 0.804000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.820000] Bridge firewalling registered
[ 0.824000] 8021q: 802.1Q VLAN Support v1.8
[ 0.836000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.860000] Freeing unused kernel memory: 1340K (80391000 - 804e0000)
[ 0.872000] SQUASHFS error: xz decompression failed, data probably corrupt
[ 0.880000] SQUASHFS error: squashfs_read_data failed to read block 0x21efaa
[ 0.888000] SQUASHFS error: Unable to read metadata cache entry [21efaa]
[ 0.892000] SQUASHFS error: Unable to read inode 0x19d7
0.00000]Startng ini: /etcpreint exiss but ouldn' execte it error 5)
[ 0.956000] SQUASHFS error: xz decompression failed, data probably corrupt
[ 0.964000] SQUASHFS error: squashfs_read_data failed to read block 0x149c1a
[ 0.972000] SQUASHFS error: Unable to read fragment cache entry [149c1a]
[ 0.976000] SQUASHFS error: Unable to read page, block 19c1a,size de4
[ 0.98400] SQASHFS rror:Unableto rea fragmnt cahe enty [14c1a]
0.92000]SQUASHS errr: Unale to ead pae, blck 1491a, sie dae4
[ 0.99600] SQUSHFS eror: nable o readfragmet cace entr [149ca]
[ .01200] SQUAHFS eror: Uable t read ragmet cach entry[149c1]
[ 1024000 SQUAHFS eror: Unble t read ragmen cacheentry[149c1]
[ 1.03200] SUASHFSerror:Unabl to red page block149c1, sizedae4
[ 1.048000 SQUASFS errr: Unble toread mtadatacacheentry 21efaar -5)
[ 1.05200] SQASHFS rror: nableto rea inode0x19d
[ 1.06000] Stating nit: /tc/ini exiss but ouldn' execue it error 5)
[ .07200] SQUAHFS eror: Uable t read node x6b8he etry [2efaa]
1.80000]Startng ini: /bininit xists ut coudn't eecuteit (eror -5)
[ 1.08800] SQUSHFS eror: nable o readmetadta cace entr [21efa]
[ 1.02000] QUASHS erro: Unabe to ead inde 0x68
[ 1.10000] Sartinginit: bin/s exist but culdn'texecue it (rror -)
[ 1.10000] Krnel pnic -not sycing: o woring int foun. Tr passig init optio to krnel. ee Linx Docuentaton/ini.txt fr gui[ 1.120000] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.tt for uidane.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment