dmesg.boot

---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #18 783c07471fb5-c268728(master)-dirty: Tue May 19 18:08:26 MSK 2020
    root@riverwood.lan:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
clang version 10.0.0
VT: init without driver.
module firmware already present!
Starting CPU 1 (1)
Starting CPU 2 (100)
Starting CPU 3 (101)
Starting CPU 4 (200)
Starting CPU 5 (201)
Starting CPU 6 (300)
Starting CPU 7 (301)
Starting CPU 8 (400)
Starting CPU 9 (401)
Starting CPU 10 (500)
Starting CPU 11 (501)
Starting CPU 12 (600)
Starting CPU 13 (601)
Starting CPU 14 (700)
Starting CPU 15 (701)
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
random: entropy device external interface
MAP ed670000 mode 2 pages 112
MAP edb80000 mode 2 pages 80
MAP edbd0000 mode 2 pages 80
MAP edc20000 mode 2 pages 80
MAP edc70000 mode 2 pages 80
MAP edcc0000 mode 2 pages 160
MAP edd60000 mode 2 pages 80
MAP efe90000 mode 2 pages 80
MAP efee0000 mode 2 pages 80
MAP eff30000 mode 2 pages 80
MAP eff80000 mode 2 pages 80
MAP effd0000 mode 2 pages 80
MAP f0020000 mode 2 pages 80
MAP f0110000 mode 2 pages 80
MAP f0160000 mode 2 pages 80
MAP f01b0000 mode 2 pages 80
MAP f0200000 mode 2 pages 80
MAP f0250000 mode 2 pages 80
MAP f02a0000 mode 2 pages 80
MAP f02f0000 mode 2 pages 80
MAP f0340000 mode 2 pages 80
MAP fadc0000 mode 2 pages 48
MAP 2040000 mode 0 pages 16
MAP 20c0000 mode 0 pages 16
MAP 20000000 mode 0 pages 16384
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
acpi0: <NXP LX2160>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller v3.0> iomem 0x6000000-0x601ffff,0x6200000-0x63fffff on acpi0
its0: <ARM GIC Interrupt Translation Service> on gic0
generic_timer0: <ARM Generic Timer> irq 16,17,18 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 25000050 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000050 Hz quality 1000
sbsawdt0: <ARM SBSA Generic Watchdog> iomem 0x2390000-0x2390fff,0x23a0000-0x23a0fff on acpi0
sbsawdt0: default watchdog period is 172 seconds
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
pmu0: <Performance Monitoring Unit> irq 19,20 on acpi0
pmu0: Unable to setup interrupt handler.
device_attach: pmu0 attach returned 6
uart0: <PrimeCell UART (PL011)> iomem 0x21c0000-0x21cffff irq 0 on acpi0
uart0: console (115200,n,8,1)
uart1: <PrimeCell UART (PL011)> iomem 0x21d0000-0x21dffff irq 1 on acpi0
uart2: <PrimeCell UART (PL011)> iomem 0x21e0000-0x21effff irq 2 on acpi0
uart3: <PrimeCell UART (PL011)> iomem 0x21f0000-0x21fffff irq 3 on acpi0
cpu0: <ACPI CPU> on acpi0
sdhci_fsl0: <Freescale eSDHC controller> iomem 0x2140000-0x214ffff irq 4 on acpi0
mmc0: <MMC/SD bus> on sdhci_fsl0
sdhci_fsl1: <Freescale eSDHC controller> iomem 0x2150000-0x215ffff irq 5 on acpi0
sdhci_fsl1-slot0: Hardware doesn't report any support voltages.
i2c0: <Vybrid Family Inter-Integrated Circuit (I2C)> iomem 0x2000000-0x200ffff irq 7 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on i2c0
iicbus0: <unknown card> at addr 0x77
iic0: <I2C generic I/O> on iicbus0
i2c1: <Vybrid Family Inter-Integrated Circuit (I2C)> iomem 0x2040000-0x204ffff irq 8 on acpi0
iicbus1: <Philips I2C bus (ACPI-hinted)> on i2c1
iic1: <I2C generic I/O> on iicbus1
pcib0: <Generic PCI host controller> on acpi0
pci0: <PCI bus> on pcib0
pcib0: pci_host_generic_core_alloc_resource FAIL: type=3, rid=16, start=0000000660000000, end=0000000660003fff, count=0000000000004000, flags=3800
nvme0: <Generic NVMe Device> mem 0x40000000-0x40003fff at device 0.0 on pci0
pcib1: <Generic PCI host controller> on acpi0
pci1: <PCI bus> on pcib1
pcib1: pci_host_generic_core_alloc_resource FAIL: type=4, rid=16, start=0000000000040000, end=00000000000400ff, count=0000000000000100, flags=2000
pcib1: pci_host_generic_core_alloc_resource FAIL: type=4, rid=16, start=0000000000000000, end=ffffffffffffffff, count=0000000000000100, flags=2000
pcib1: pci_host_generic_core_alloc_resource FAIL: type=3, rid=20, start=0000000670440000, end=0000000670443fff, count=0000000000004000, flags=3800
pcib1: pci_host_generic_core_alloc_resource FAIL: type=3, rid=28, start=0000000670000000, end=000000067003ffff, count=0000000000040000, flags=4800
pci1: <mass storage, SAS> at device 0.0 (no driver attached)
ahci0: <AHCI SATA controller> iomem 0x3200000-0x320ffff,0x700100520-0x700100523 on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <AHCI SATA controller> iomem 0x3210000-0x321ffff on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <AHCI SATA controller> iomem 0x3220000-0x322ffff on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <AHCI SATA controller> iomem 0x3230000-0x323ffff on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
xhci0: <Generic USB 3.0 controller> iomem 0x3100000-0x310ffff irq 14 on acpi0
xhci0: 64 bytes context size, 32-bit DMA
usbus0 on xhci0
xhci1: <Generic USB 3.0 controller> iomem 0x3110000-0x311ffff irq 15 on acpi0
xhci1: 64 bytes context size, 32-bit DMA
usbus1 on xhci1
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
ugen1.1: <Generic XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Generic XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmcsd0: 32GB <SDHC SB32G 8.0 SN DD1242F8 MFG 09/2017 by 3 SD> at mmc0 43.7MHz/4bit/65535-block
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x04b4 product 0x6502> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x04b4 product 0x6502, class 9/0, rev 2.10/50.10, addr 1> on usbus1
uhub2: MTT enabled
panic: NVME polled command failed to complete within 1s.
cpuid = 0
time = 2
KDB: stack backtrace:
db_trace_self() at db_trace_self_wrapper+0x28
	 pc = 0xffff00000084c554  lr = 0xffff00000012ea10
	 sp = 0xffff000000010520  fp = 0xffff000000010720

db_trace_self_wrapper() at vpanic+0x194
	 pc = 0xffff00000012ea10  lr = 0xffff00000049b724
	 sp = 0xffff000000010730  fp = 0xffff000000010780

vpanic() at panic+0x44
	 pc = 0xffff00000049b724  lr = 0xffff00000049b58c
	 sp = 0xffff000000010790  fp = 0xffff000000010840

panic() at nvme_ctrlr_set_num_qpairs+0x5c
	 pc = 0xffff00000049b58c  lr = 0xffff0000002341a8
	 sp = 0xffff000000010850  fp = 0xffff000000010870

nvme_ctrlr_set_num_qpairs() at nvme_ctrlr_start_config_hook+0x16c
	 pc = 0xffff0000002341a8  lr = 0xffff000000233e40
	 sp = 0xffff000000010880  fp = 0xffff0000000108c0

nvme_ctrlr_start_config_hook() at run_interrupt_driven_config_hooks+0x11c
	 pc = 0xffff000000233e40  lr = 0xffff0000004d7cf0
	 sp = 0xffff0000000108d0  fp = 0xffff000000010920

run_interrupt_driven_config_hooks() at boot_run_interrupt_driven_config_hooks+0x2c
	 pc = 0xffff0000004d7cf0  lr = 0xffff0000004d80a0
	 sp = 0xffff000000010930  fp = 0xffff0000000109b0

boot_run_interrupt_driven_config_hooks() at mi_startup+0x22c
	 pc = 0xffff0000004d80a0  lr = 0xffff000000419e20
	 sp = 0xffff0000000109c0  fp = 0xffff000000010a20

mi_startup() at virtdone+0x5c
	 pc = 0xffff000000419e20  lr = 0xffff00000000108c
	 sp = 0xffff000000010a30  fp = 0x0000000000000000

KDB: enter: panic
[ thread pid 0 tid 100000 ]
Stopped at      0
db>