Created
May 18, 2020 14:23
-
-
Save agrajag9/ce1107a1962283b64205bc8f35123a5c to your computer and use it in GitHub Desktop.
lx2160acex7 UEFI boot to FreeBSD aarch64 install memstick img
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| NOTICE: BL2: v1.5(release):v1.5-270-gfc2fcdcc | |
| NOTICE: BL2: Built : 20:31:57, May 16 2020 | |
| NOTICE: UDIMM HMA82GS6AFR8N-UH | |
| NOTICE: DDR4 UDIMM with 2-rank 64-bit bus (x8) | |
| NOTICE: 16 GB DDR4, 64-bit, CL=17, ECC off, CS0+CS1 | |
| NOTICE: BL2: Booting BL31 | |
| NOTICE: BL31: v1.5(release):v1.5-270-gfc2fcdcc | |
| NOTICE: BL31: Built : 20:31:57, May 16 2020 | |
| NOTICE: Welcome to LX2160 BL31 Phase | |
| UEFI firmware (version built at 20:30:14 on May 16 2020) | |
| Clock Configuration: | |
| CPU0(A72):2000 MHz CPU1(A72):2000 MHz CPU2(A72):2000 MHz | |
| CPU3(A72):2000 MHz CPU4(A72):2000 MHz CPU5(A72):2000 MHz | |
| CPU6(A72):2000 MHz CPU7(A72):2000 MHz CPU8(A72):2000 MHz | |
| CPU9(A72):2000 MHz CPU10(A72):2000 MHz CPU11(A72):2000 MHz | |
| CPU12(A72):2000 MHz CPU13(A72):2000 MHz CPU14(A72):2000 MHz | |
| CPU15(A72):2000 MHz | |
| Bus: 700 MHz DDR: 2400 MT/s | |
| Reset Configuration Word (RCW): | |
| 00000000: 38636350 50005024 00000000 00000000 | |
| 00000010: 00000000 0000010E 00000000 00000000 | |
| 00000020: A0014006 80250000 00000000 81100000 | |
| 00000030: 00002409 01000000 00000000 00000000 | |
| 00000040: 00000000 00000000 00000000 00000000 | |
| 00000050: 00000000 00000000 00000000 00000000 | |
| 00000060: 00000000 00000000 00700200 00000000 | |
| 00000070: 0100A808 20101500 00000000 00000000 | |
| SOC: unknown (0x87361010) | |
| UEFI firmware (version built at 20:30:16 on May 16 2020) | |
| Error: Image at 000FAEE2000 start failed: 00000001 | |
| Flash Size = 67108864 | |
| Page Program Size = 256 | |
| Erase Size = 4096 | |
| Erase Timeout = 480000 | |
| Page Program Timeout = 2880 | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| PCIE1 is disabled | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| PCIE2 is disabled | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| PCIE3 is Enabled | |
| Pcie Link error. LTSSM=0x 1 | |
| Pcie Link error. LTSSM=0x 1 | |
| no link, regs @ 0x3600000 | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| PCIE4 is disabled | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| PCIE5 is Enabled | |
| Pcie Link error. LTSSM=0x 1 | |
| Pcie Link error. LTSSM=0x 0 | |
| no link, regs @ 0x3800000 | |
| Using SERDES1 Protocol: 8 (0x8) | |
| Protocol: 8 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES2 Protocol: 5 (0x5) | |
| Protocol: 5 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| Using SERDES3 Protocol: 2 (0x2) | |
| Protocol: 2 Matched with the one in Table | |
| Successfully configured SerDes module!! | |
| PCIE6 is disabled | |
| Error: Image at 000FAE99000 start failed: Unsupported | |
| MmcNotifyState(MmcHwInitializationState) | |
| SdxcSendCmd: Timeout for Cmd(1) | |
| SdxcSendCmd: Timeout for Cmd(5) | |
| Card is SD2.0 => Supports high capacity | |
| High capacity card. | |
| - PrintOCR Ocr (0xC0FF8000) | |
| - Card operating voltage: 2.7 to 3.6 | |
| - AccessMode: Block Mode (0x2) | |
| - PowerUp | |
| - PrintCID | |
| - Manufacturing date: 9/17 | |
| - Product serial number: 0xDD1242F8 | |
| - Product revision: 128 | |
| - OEM ID: DS | |
| - PrintRCA: 0xAAAA0520 | |
| - Status: 0x520 | |
| - RCA: 0xAAAA | |
| - PrintCSD Version 2.00/High Capacity | |
| - Supported card command class: 0x5B5 | |
| - Speed: 3.0 10Mbit/s | |
| - Maximum Read Data Block: 512 | |
| - Maximum Write Data Block: 512 | |
| - Format (0): Hard disk-like file system with partition table | |
| MmcNotifyState(MmcHwInitializationState) | |
| DPAA2 ERROR: Storage media '3' for MC firmware images not supported | |
| Press ESCAPE for boot options XhcCheckUrbResult: STALL_ERROR! Completecode = 6 | |
| XhcControlTransfer: error - Device Error, transfer - 2 | |
| XHCI: Don't support multi-TT feature for Hub now. (force to disable MTT) | |
| XhcCheckUrbResult: STALL_ERROR! Completecode = 6 | |
| XhcControlTransfer: error - Device Error, transfer - 2 | |
| XhcCheckUrbResult: STALL_ERROR! Completecode = 6 | |
| XhcControlTransfer: error - Device Error, transfer - 2 | |
| XHCI: Don't support multi-TT feature for Hub now. (force to disable MTT) | |
| ........... | |
| >> FreeBSD EFI boot block | |
| Loader path: /boot/loader.efi | |
| Initializing modules: ZFS UFS | |
| Load Path: \EFI\BOOT\BOOTAA64.EFI | |
| Load Device: eMMC(0xCA)/HD(1,GPT,1086B3DF-FC60-11E9-90A5-0CC47AD8B808,0x3,0x6 | |
| 40) | |
| BootCurrent: 0002 | |
| BootOrder: 0000 0001 0002[*] 0003 | |
| Probing 4 block devices......* done | |
| ZFS found no pools | |
| UFS found 1 partition | |
| Consoles: EFI console | |
| FreeBSD/arm64 EFI loader, Revision 1.1 | |
| Command line arguments: loader.efi | |
| EFI version: 2.70 | |
| EFI Firmware: EDK II (rev 1.00) | |
| Console: efi (0) | |
| Load Path: HD(2,GPT,1086B3E4-FC60-11E9-90A5-0CC47AD8B808,0x643,0x1E7FC0) | |
| Load Device: eMMC(0xCA)/HD(2,GPT,1086B3E4-FC60-11E9-90A5-0CC47AD8B808,0x643,0 | |
| x1E7FC0) | |
| BootCurrent: 0002 | |
| BootOrder: 0000 0001 0002[*] 0003 | |
| BootInfo Path: eMMC(0xCA) | |
| Ignoring Boot0002: Only one DP found | |
| Trying ESP: eMMC(0xCA)/HD(2,GPT,1086B3E4-FC60-11E9-90A5-0CC47AD8B808,0x643,0x1E7 | |
| FC0) | |
| Setting currdev to disk1p2: | |
| Loading /boot/defaults/loader.conf | |
| Loading /boot/device.hints | |
| Loading /boot/loader.conf | |
| Loading /boot/loader.conf.local |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment