OSP11 undercloud.conf

gistfile1.txt

[DEFAULT]

#
# From instack-undercloud
#

# Fully qualified hostname (including domain) to set on the
# Undercloud. If left unset, the current hostname will be used, but
# the user is responsible for configuring all system hostname settings
# appropriately.  If set, the undercloud install will configure all
# system hostname settings. (string value)
#undercloud_hostname = <None>

# IP information for the interface on the Undercloud that will be
# handling the PXE boots and DHCP for Overcloud instances.  The IP
# portion of the value will be assigned to the network interface
# defined by local_interface, with the netmask defined by the prefix
# portion of the value. (string value)
#local_ip = 192.168.24.1/24
local_ip = 192.168.0.1/16

# Network gateway for the Neutron-managed network for Overcloud
# instances. This should match the local_ip above when using
# masquerading. (string value)
#network_gateway = 192.168.24.1
network_gateway = 192.168.0.1

# Virtual IP or DNS address to use for the public endpoints of
# Undercloud services. Only used with SSL. (string value)
# Deprecated group/name - [DEFAULT]/undercloud_public_vip
#undercloud_public_host = 192.168.24.2

# Virtual IP or DNS address to use for the admin endpoints of
# Undercloud services. Only used with SSL. (string value)
# Deprecated group/name - [DEFAULT]/undercloud_admin_vip
#undercloud_admin_host = 192.168.24.3

# DNS nameserver(s) to use for the undercloud node. (list value)
#undercloud_nameservers =

# List of ntp servers to use. (list value)
#undercloud_ntp_servers =
undercloud_ntp_servers = foreman.rdu.openstack.engineering.redhat.com

# Certificate file to use for OpenStack service SSL connections.
# Setting this enables SSL for the OpenStack API endpoints, leaving it
# unset disables SSL. (string value)
#undercloud_service_certificate =

# When set to True, an SSL certificate will be generated as part of
# the undercloud install and this certificate will be used in place of
# the value for undercloud_service_certificate.  The resulting
# certificate will be written to
# /etc/pki/tls/certs/undercloud-[undercloud_public_host].pem.  This
# certificate is signed by CA selected by the
# "certificate_generation_ca" option. (boolean value)
#generate_service_certificate = false

# The certmonger nickname of the CA from which the certificate will be
# requested. This is used only if the generate_service_certificate
# option is set. Note that if the "local" CA is selected the
# certmonger's local CA certificate will be extracted to /etc/pki/ca-
# trust/source/anchors/cm-local-ca.pem and subsequently added to the
# trust chain. (string value)
#certificate_generation_ca = local

# The kerberos principal for the service that will use the
# certificate. This is only needed if your CA requires a kerberos
# principal. e.g. with FreeIPA. (string value)
#service_principal =

# Network interface on the Undercloud that will be handling the PXE
# boots and DHCP for Overcloud instances. (string value)
#local_interface = eth1
local_interface = enp94s0f1

# MTU to use for the local_interface. (integer value)
#local_mtu = 1500

# Network CIDR for the Neutron-managed network for Overcloud
# instances. This should be the subnet used for PXE booting. (string
# value)
#network_cidr = 192.168.24.0/24
network_cidr = 192.168.0.0/16

# Network that will be masqueraded for external access, if required.
# This should be the subnet used for PXE booting. (string value)
#masquerade_network = 192.168.24.0/24

# Start of DHCP allocation range for PXE and DHCP of Overcloud
# instances. (string value)
#dhcp_start = 192.168.24.5
dhcp_start = 192.168.10.1

# End of DHCP allocation range for PXE and DHCP of Overcloud
# instances. (string value)
#dhcp_end = 192.168.24.24
dhcp_end = 192.168.19.250

# Path to hieradata override file. If set, the file will be copied
# under /etc/puppet/hieradata and set as the first file in the hiera
# hierarchy. This can be used to custom configure services beyond what
# undercloud.conf provides (string value)
#hieradata_override =

# Path to network config override template. If set, this template will
# be used to configure the networking via os-net-config. Must be in
# json format. Templated tags can be used within the template, see
# instack-undercloud/elements/undercloud-stack-config/net-
# config.json.template for example tags (string value)
#net_config_override =

# Network interface on which inspection dnsmasq will listen.  If in
# doubt, use the default value. (string value)
# Deprecated group/name - [DEFAULT]/discovery_interface
#inspection_interface = br-ctlplane

# Temporary IP range that will be given to nodes during the inspection
# process.  Should not overlap with the range defined by dhcp_start
# and dhcp_end, but should be in the same network. (string value)
# Deprecated group/name - [DEFAULT]/discovery_iprange
#inspection_iprange = 192.168.24.100,192.168.24.120
inspection_iprange = 192.168.1.1,192.168.9.250

# Whether to enable extra hardware collection during the inspection
# process. Requires python-hardware or python-hardware-detect package
# on the introspection image. (boolean value)
#inspection_extras = true

# Whether to run benchmarks when inspecting nodes. Requires
# inspection_extras set to True. (boolean value)
# Deprecated group/name - [DEFAULT]/discovery_runbench
#inspection_runbench = false

# Whether to support introspection of nodes that have UEFI-only
# firmware. (boolean value)
#inspection_enable_uefi = true

# Makes ironic-inspector enroll any unknown node that PXE-boots
# introspection ramdisk in Ironic. By default, the "fake" driver is
# used for new nodes (it is automatically enabled when this option is
# set to True). Set discovery_default_driver to override.
# Introspection rules can also be used to specify driver information
# for newly enrolled nodes. (boolean value)
#enable_node_discovery = false

# The default driver to use for newly discovered nodes (requires
# enable_node_discovery set to True). This driver is automatically
# added to enabled_drivers. (string value)
#discovery_default_driver = pxe_ipmitool

# Whether to enable the debug log level for Undercloud OpenStack
# services. (boolean value)
#undercloud_debug = true

# Whether to update packages during the Undercloud install. (boolean
# value)
#undercloud_update_packages = true

# Whether to install Tempest in the Undercloud. (boolean value)
#enable_tempest = true

# Whether to install Telemetry services (ceilometer, aodh) in the
# Undercloud. (boolean value)
#enable_telemetry = true

# Whether to install the TripleO UI. (boolean value)
#enable_ui = true

# Whether to install requirements to run the TripleO validations.
# (boolean value)
#enable_validations = true

# Whether to install the Volume service. It is not currently used in
# the undercloud. (boolean value)
#enable_cinder = false

# Whether to enable legacy ceilometer api in the Undercloud. Note:
# Ceilometer API has been deprecated and will be removed in future
# release. Please consider moving to gnocchi/Aodh/Panko API instead.
# (boolean value)
#enable_legacy_ceilometer_api = true

# Whether to install novajoin metadata service in the Undercloud.
# (boolean value)
#enable_novajoin = false

# One Time Password to register Undercloud node with an IPA server.
# Required when enable_novajoin = True. (string value)
#ipa_otp =

# Whether to use iPXE for deploy and inspection. (boolean value)
# Deprecated group/name - [DEFAULT]/ipxe_deploy
#ipxe_enabled = true

# Maximum number of attempts the scheduler will make when deploying
# the instance. You should keep it greater or equal to the number of
# bare metal nodes you expect to deploy at once to work around
# potential race condition when scheduling. (integer value)
# Minimum value: 1
#scheduler_max_attempts = 30
scheduler_max_attempts = 42

# Whether to clean overcloud nodes (wipe the hard drive) between
# deployments and after the introspection. (boolean value)
#clean_nodes = false
clean_nodes = False

# List of enabled bare metal drivers. (list value)
#enabled_drivers = pxe_ipmitool,pxe_drac,pxe_ilo,pxe_ssh


[auth]

#
# From instack-undercloud
#

# Password used for MySQL root user. If left unset, one will be
# automatically generated. (string value)
#undercloud_db_password = <None>

# Keystone admin token. If left unset, one will be automatically
# generated. (string value)
#undercloud_admin_token = <None>

# Keystone admin password. If left unset, one will be automatically
# generated. (string value)
#undercloud_admin_password = <None>

# Glance service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_glance_password = <None>

# Heat db encryption key(must be 16, 24, or 32 characters. If left
# unset, one will be automatically generated. (string value)
#undercloud_heat_encryption_key = <None>

# Heat service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_heat_password = <None>

# Heat cfn service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_heat_cfn_password = <None>

# Neutron service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_neutron_password = <None>

# Nova service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_nova_password = <None>

# Ironic service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_ironic_password = <None>

# Aodh service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_aodh_password = <None>

# Gnocchi service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_gnocchi_password = <None>

# Ceilometer service password. If left unset, one will be
# automatically generated. (string value)
#undercloud_ceilometer_password = <None>

# Panko service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_panko_password = <None>

# Ceilometer metering secret. If left unset, one will be automatically
# generated. (string value)
#undercloud_ceilometer_metering_secret = <None>

# Ceilometer snmpd read-only user. If this value is changed from the
# default, the new value must be passed in the overcloud environment
# as the parameter SnmpdReadonlyUserName. This value must be between 1
# and 32 characters long. (string value)
#undercloud_ceilometer_snmpd_user = ro_snmp_user

# Ceilometer snmpd password. If left unset, one will be automatically
# generated. (string value)
#undercloud_ceilometer_snmpd_password = <None>

# Swift service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_swift_password = <None>

# Mistral service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_mistral_password = <None>

# Rabbitmq cookie. If left unset, one will be automatically generated.
# (string value)
#undercloud_rabbit_cookie = <None>

# Rabbitmq password. If left unset, one will be automatically
# generated. (string value)
#undercloud_rabbit_password = <None>

# Rabbitmq username. If left unset, one will be automatically
# generated. (string value)
#undercloud_rabbit_username = <None>

# Heat stack domain admin password. If left unset, one will be
# automatically generated. (string value)
#undercloud_heat_stack_domain_admin_password = <None>

# Swift hash suffix. If left unset, one will be automatically
# generated. (string value)
#undercloud_swift_hash_suffix = <None>

# HAProxy stats password. If left unset, one will be automatically
# generated. (string value)
#undercloud_haproxy_stats_password = <None>

# Zaqar password. If left unset, one will be automatically generated.
# (string value)
#undercloud_zaqar_password = <None>

# Horizon secret key. If left unset, one will be automatically
# generated. (string value)
#undercloud_horizon_secret_key = <None>

# Cinder service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_cinder_password = <None>