Booting Problem #2

gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.18-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1093 SMP Fri Feb 9 15:33:07 GMT 2018
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Rev 1.0
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x3ac00000
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 17 pages/cpu @ba34b000 s38720 r8192 d22720 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
[    0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:39:4C:A8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200  console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait maxcpus=4
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 940268K/970752K available (7168K kernel code, 548K rwdata, 2028K rodata, 1024K init, 706K bss, 22292K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80800000   (8160 kB)
[    0.000000]       .init : 0x80b00000 - 0x80c00000   (1024 kB)
[    0.000000]       .data : 0x80c00000 - 0x80c89244   ( 549 kB)
[    0.000000]        .bss : 0x80c90ed4 - 0x80d41734   ( 707 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 24624 entries in 73 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000023] Switching to timer-based delay loop, resolution 52ns
[    0.000268] Console: colour dummy device 80x30
[    0.000815] console [tty1] enabled
[    0.000857] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000897] pid_max: default: 32768 minimum: 301
[    0.001226] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001258] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002212] Disabling memory control group subsystem
[    0.002311] CPU: Testing write buffer coherency: ok
[    0.002711] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003104] Setting up static identity map for 0x100000 - 0x10003c
[    0.003239] Hierarchical SRCU implementation.
[    0.003893] smp: Bringing up secondary CPUs ...
[    0.004549] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.005267] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.005971] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.006074] smp: Brought up 1 node, 4 CPUs
[    0.006145] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.006166] CPU: All CPU(s) started in HYP mode.
[    0.006184] CPU: Virtualization extensions available.
[    0.007045] devtmpfs: initialized
[    0.017365] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.017611] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017656] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.018229] pinctrl core: initialized pinctrl subsystem
[    0.018990] NET: Registered protocol family 16
[    0.021623] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.026415] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.026447] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.026659] Serial: AMBA PL011 UART driver
[    0.028293] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.028764] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.059679] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80d000, dmachans=0x1
[    0.061191] SCSI subsystem initialized
[    0.061336] usbcore: registered new interface driver usbfs
[    0.061406] usbcore: registered new interface driver hub
[    0.061505] usbcore: registered new device driver usb
[    0.070081] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-02-09 14:22
[    0.071354] clocksource: Switched to clocksource arch_sys_counter
[    0.147760] VFS: Disk quotas dquot_6.6.0
[    0.147873] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.148077] FS-Cache: Loaded
[    0.148286] CacheFiles: Loaded
[    0.157022] NET: Registered protocol family 2
[    0.157766] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.157895] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.158098] TCP: Hash tables configured (established 8192 bind 8192)
[    0.158247] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.158308] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.158551] NET: Registered protocol family 1
[    0.159011] RPC: Registered named UNIX socket transport module.
[    0.159035] RPC: Registered udp transport module.
[    0.159054] RPC: Registered tcp transport module.
[    0.159073] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.160510] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.163301] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.171171] FS-Cache: Netfs 'nfs' registered for caching
[    0.171820] NFS: Registering the id_resolver key type
[    0.171868] Key type id_resolver registered
[    0.171887] Key type id_legacy registered
[    0.173772] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.173919] io scheduler noop registered
[    0.173941] io scheduler deadline registered (default)
[    0.174229] io scheduler cfq registered
[    0.174250] io scheduler mq-deadline registered
[    0.174270] io scheduler kyber registered
[    0.176997] BCM2708FB: allocated DMA memory fad10000
[    0.177043] BCM2708FB: allocated DMA channel 0 @ bb80d000
[    0.213550] Console: switching to colour frame buffer device 160x64
[    0.235536] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.237079] bcm2835-rng 3f104000.rng: hwrng registered
[    0.237353] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.238010] vc-sm: Videocore shared memory driver
[    0.238414] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.248167] brd: module loaded
[    0.257048] loop: module loaded
[    0.257181] Loading iSCSI transport class v2.0-870.
[    0.257822] usbcore: registered new interface driver smsc95xx
[    0.258008] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.486259] Core Release: 2.80a
[    0.486364] Setting default values for core params
[    0.486531] Finished setting default values for core params
[    0.686925] Using Buffer DMA mode
[    0.687031] Periodic Transfer Interrupt Enhancement - disabled
[    0.687195] Multiprocessor Interrupt Enhancement - disabled
[    0.687355] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.687488] Dedicated Tx FIFOs mode
[    0.687986] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[    0.688277] FIQ FSM acceleration enabled for :
[    0.688277] Non-periodic Split Transactions
[    0.688277] Periodic Split Transactions
[    0.688277] High-Speed Isochronous Endpoints
[    0.688277] Interrupt/Control Split Transaction hack enabled
[    0.688922] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805c61ec
[    0.689101] WARN::hcd_init_fiq:460: FIQ ASM at 0x805c6554 length 36
[    0.689285] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb878000
[    0.689505] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.689677] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.696671] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.703669] Init: Port Power? op_state=1
[    0.710583] Init: Power Port (0)
[    0.717624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.724587] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.731517] usb usb1: Product: DWC OTG Controller
[    0.738367] usb usb1: Manufacturer: Linux 4.14.18-v7+ dwc_otg_hcd
[    0.745245] usb usb1: SerialNumber: 3f980000.usb
[    0.752683] hub 1-0:1.0: USB hub found
[    0.759488] hub 1-0:1.0: 1 port detected
[    0.767056] usbcore: registered new interface driver usb-storage
[    0.774148] mousedev: PS/2 mouse device common for all mice
[    0.781139] IR NEC protocol handler initialized
[    0.788018] IR RC5(x/sz) protocol handler initialized
[    0.794826] IR RC6 protocol handler initialized
[    0.801569] IR JVC protocol handler initialized
[    0.808185] IR Sony protocol handler initialized
[    0.814801] IR SANYO protocol handler initialized
[    0.821436] IR Sharp protocol handler initialized
[    0.828009] IR MCE Keyboard/mouse protocol handler initialized
[    0.834599] IR XMP protocol handler initialized
[    0.841782] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.848656] bcm2835-cpufreq: min=600000 max=1200000
[    0.855653] sdhci: Secure Digital Host Controller Interface driver
[    0.862374] sdhci: Copyright(c) Pierre Ossman
[    0.869451] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.876585] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.883917] ledtrig-cpu: registered to indicate activity on CPUs
[    0.890929] hidraw: raw HID events driver (C) Jiri Kosina
[    0.897971] usbcore: registered new interface driver usbhid
[    0.904892] usbhid: USB HID core driver
[    0.912355] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[    0.920690] [vc_sm_connected_init]: start
[    0.930260] [vc_sm_connected_init]: end - returning 0
[    0.937562] Initializing XFRM netlink socket
[    0.944203] NET: Registered protocol family 17
[    0.950937] Key type dns_resolver registered
[    0.958006] Registering SWP/SWPB emulation handler
[    0.965226] registered taskstats version 1
[    0.977687] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.984521] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.992998] Indeed it is in host mode hprt0 = 00021501
[    1.059966] console [ttyS0] disabled
[    1.066800] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 31250000) is a 16550
[    1.284705] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.290477] Indeed it is in host mode hprt0 = 00001101
[    1.623628] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    1.623638] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.623644] usb 1-1: Product: USB2.0 Hub
[    1.631666] hub 1-1:1.0: USB hub found
[    1.638901] hub 1-1:1.0: 4 ports detected
[    2.198398] console [ttyS0] enabled
[    2.209959] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    2.222856] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    2.292419] of_cfs_init
[    2.301808] of_cfs_init: OK
[    2.311765] Waiting for root device /dev/mmcblk0p2...
[    2.357739] mmc1: new high speed MMC card at address 0001
[    2.370473] mmcblk1: mmc1:0001 4FPD3R 3.64 GiB
[    2.382052] mmcblk1boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
[    2.395098] mmcblk1boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
[    2.407988] mmcblk1rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
[    2.421649]  mmcblk1: p1 p2
[    2.461393] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.601608] usb 1-1.1: New USB device found, idVendor=0424, idProduct=9512
[    2.615378] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.630077] hub 1-1.1:1.0: USB hub found
[    2.640860] hub 1-1.1:1.0: 3 ports detected
[    2.751382] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[    2.895297] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode
[    2.895297]
[    2.920163] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode
[    2.920163]
[    2.946892] usb 1-1.2: unable to read config index 0 descriptor/start: -71
[    2.961048] usb 1-1.2: can't read configurations, error -71
[    3.011382] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
[    3.151741] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.166147] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.183498] smsc95xx v1.0.6
[    3.251382] usb 1-1.2: new full-speed USB device number 6 using dwc_otg
[    3.294747] smsc95xx 1-1.1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:39:4c:a8
[    3.622668] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode
[    3.622668]
[    3.654904] usb 1-1.2: unable to read config index 0 descriptor/all
[    3.669206] usb 1-1.2: can't read configurations, error -71
[    3.683018] usb 1-1-port2: attempt power cycle
[    4.351379] usb 1-1.2: new full-speed USB device number 7 using dwc_otg
[    4.611403] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode
[    4.611403]
[    4.666386] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6015
[    4.681477] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.696976] usb 1-1.2: Product: FT230X Basic UART
[    4.709762] usb 1-1.2: SerialNumber: FTDI
[    4.821378] usb 1-1.3: new high-speed USB device number 8 using dwc_otg
[    4.967875] usb 1-1.3: New USB device found, idVendor=0424, idProduct=2240
[    4.982877] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.998304] usb 1-1.3: Product: Ultra Fast Media
[    5.011023] usb 1-1.3: Manufacturer: Generic
[    5.023229] usb 1-1.3: SerialNumber: 000000225001
[    5.036413] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    5.051255] scsi host0: usb-storage 1-1.3:1.0
[    6.072345] scsi 0:0:0:0: Direct-Access     Generic  Ultra HS-COMBO   1.98 PQ: 0 ANSI: 0
[    6.090154] sd 0:0:0:0: [sda] 62688 512-byte logical blocks: (32.1 MB/30.6 MiB)
[    6.106456] sd 0:0:0:0: [sda] Write Protect is off
[    6.120008] sd 0:0:0:0: [sda] No Caching mode page found
[    6.133482] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    6.152842] sd 0:0:0:0: [sda] Attached SCSI removable disk