Created
June 19, 2012 05:09
-
-
Save anonymous/2952404 to your computer and use it in GitHub Desktop.
stdin
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Jun 19 07:27:41 goblin kernel: [141590.752052] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen | |
Jun 19 07:27:41 goblin kernel: [141590.752057] ata3.00: failed command: FLUSH CACHE EXT | |
Jun 19 07:27:41 goblin kernel: [141590.752064] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 | |
Jun 19 07:27:41 goblin kernel: [141590.752066] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) | |
Jun 19 07:27:41 goblin kernel: [141590.752070] ata3.00: status: { DRDY } | |
Jun 19 07:27:41 goblin kernel: [141590.752077] ata3: hard resetting link | |
Jun 19 07:27:41 goblin kernel: [141590.752080] ata3: nv: skipping hardreset on occupied port | |
Jun 19 07:27:46 goblin kernel: [141596.255061] ata3: link is slow to respond, please be patient (ready=0) | |
Jun 19 07:27:51 goblin kernel: [141600.794065] ata3: SRST failed (errno=-16) | |
Jun 19 07:27:51 goblin kernel: [141600.794070] ata3: hard resetting link | |
Jun 19 07:27:51 goblin kernel: [141600.794073] ata3: nv: skipping hardreset on occupied port | |
Jun 19 07:27:56 goblin kernel: [141606.298014] ata3: link is slow to respond, please be patient (ready=0) | |
Jun 19 07:28:01 goblin kernel: [141610.837038] ata3: SRST failed (errno=-16) | |
Jun 19 07:28:01 goblin kernel: [141610.837043] ata3: hard resetting link | |
Jun 19 07:28:01 goblin kernel: [141610.837046] ata3: nv: skipping hardreset on occupied port | |
Jun 19 07:28:07 goblin kernel: [141616.341060] ata3: link is slow to respond, please be patient (ready=0) | |
Jun 19 07:28:36 goblin kernel: [141645.872016] ata3: SRST failed (errno=-16) | |
Jun 19 07:28:36 goblin kernel: [141645.872022] ata3: limiting SATA link speed to 1.5 Gbps | |
Jun 19 07:28:36 goblin kernel: [141645.872025] ata3: hard resetting link | |
Jun 19 07:28:36 goblin kernel: [141645.872027] ata3: nv: skipping hardreset on occupied port | |
Jun 19 07:28:41 goblin kernel: [141650.916039] ata3: SRST failed (errno=-16) | |
Jun 19 07:28:41 goblin kernel: [141650.916045] ata3: reset failed, giving up | |
Jun 19 07:28:41 goblin kernel: [141650.916048] ata3.00: disabled | |
Jun 19 07:28:41 goblin kernel: [141650.916055] ata3.00: device reported invalid CHS sector 0 | |
Jun 19 07:28:41 goblin kernel: [141650.916066] ata3: EH complete | |
Jun 19 07:28:41 goblin kernel: [141650.916117] sd 2:0:0:0: [sdc] Unhandled error code | |
Jun 19 07:28:41 goblin kernel: [141650.916120] sd 2:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK | |
Jun 19 07:28:41 goblin kernel: [141650.916125] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 21 | |
Jun 19 07:28:41 goblin kernel: [141650.916133] sd 2:0:0:0: [sdc] Unhandled error code | |
Jun 19 07:28:41 goblin kernel: [141650.916136] sd 2:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK | |
Jun 19 07:28:41 goblin lvm[3994]: Log device 253:10 has failed (D). | |
Jun 19 07:28:41 goblin lvm[3994]: Device failure in vg_data-photo. | |
Jun 19 07:28:41 goblin kernel: [141650.916141] sd 2:0:0:0: [sdc] CDB: Write(10): 2a 00 50 b5 68 00 00 00 16 00 | |
Jun 19 07:28:41 goblin kernel: [141650.916150] end_request: I/O error, dev sdc, sector 1354065920 | |
Jun 19 07:28:41 goblin kernel: [141650.916152] 43 cc c0 00 00 28 00 | |
Jun 19 07:28:41 goblin kernel: [141650.916158] end_request: I/O error, dev sdc, sector 558091456 | |
Jun 19 07:28:41 goblin kernel: [141650.916173] sd 2:0:0:0: [sdc] Unhandled error code | |
Jun 19 07:28:41 goblin kernel: [141650.916176] sd 2:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK | |
Jun 19 07:28:41 goblin kernel: [141650.916180] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 08 00 00 00 04 00 | |
Jun 19 07:28:41 goblin kernel: [141650.916190] end_request: I/O error, dev sdc, sector 2048 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment