centos7

Starting install...
Retrieving file vmlinuz...                                                | 4.9 MB  00:00:00
Retrieving file initrd.img...                                             |  37 MB  00:00:00
Creating domain...                                                        |    0 B  00:00:00
Connected to domain centos7
Escape character is ^]
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0-327.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Thu Nov 19 22:10:57 UTC 2015
[    0.000000] Command line: console=ttyS0,115200n8 serial method=http://mirror.yandex.ru/centos/7/os/x86_64/
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffd9000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] Hypervisor detected: KVM
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbffd9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6b60-0x000f6b6f] mapped at [ffff8800000f6b60]
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbffd8fff]
[    0.000000] RAMDISK: [mem 0x7db46000-0x7fffffff]
[    0.000000] ACPI: RSDP 00000000000f6b10 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 00000000bffe1692 0002C (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 00000000bffe158e 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 00000000bffdfd80 0180E (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 00000000bffdfd40 00040
[    0.000000] ACPI: APIC 00000000bffe1602 00090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13ffd7000-0x13fffdfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 1:3ff87001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 443654703 cycles
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbffd8fff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffd9000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013fc00000 s87168 r8192 d31616 u524288
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 13fc0d240
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1032034
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8 serial method=http://mirror.yandex.ru/centos/7/os/x86_64/
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 4007660k/5242880k available (6440k kernel code, 1049124k absent, 186096k reserved, 4266k data, 1620k init)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=4.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:327936 nr_irqs:456 0
[    0.000000] Console: colour *CGA 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Detected 2500.100 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.003000] Calibrating delay loop (skipped) preset value.. 5000.20 BogoMIPS (lpj=2500100)
[    0.003543] pid_max: default: 32768 minimum: 301
[    0.004030] Security Framework initialized
[    0.005014] SELinux:  Initializing.
[    0.006774] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009007] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010499] Mount-cache hash table entries: 4096
[    0.011219] Initializing cgroup subsys memory
[    0.012013] Initializing cgroup subsys devices
[    0.013004] Initializing cgroup subsys freezer
[    0.014004] Initializing cgroup subsys net_cls
[    0.015004] Initializing cgroup subsys blkio
[    0.016004] Initializing cgroup subsys perf_event
[    0.017004] Initializing cgroup subsys hugetlb
[    0.018097] mce: CPU supports 10 MCE banks
[    0.018941] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.018941] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127
[    0.018941] tlb_flushall_shift: 6
[    0.019253] Freeing SMP alternatives: 28k freed
[    0.025685] ACPI: Core revision 20130517
[    0.027351] ACPI: All ACPI Tables successfully acquired
[    0.028092] ftrace: allocating 24585 entries in 97 pages
[    0.035340] Enabling x2apic
[    0.035915] Enabled x2apic
[    0.036005] Switched APIC routing to physical x2apic.
[    0.039478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.040002] smpboot: CPU0: AMD Opteron 63xx class CPU (fam: 15, model: 02, stepping: 00)
[    0.043000] Performance Events: AMD PMU driver.
[    0.043004] ... version:                0
[    0.043878] ... bit width:              48
[    0.044001] ... generic registers:      4
[    0.045001] ... value mask:             0000ffffffffffff
[    0.046001] ... max period:             00007fffffffffff
[    0.047001] ... fixed-purpose events:   0
[    0.048001] ... event mask:             000000000000000f
[    0.051609] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.052095] smpboot: Booting Node   0, Processors  #1[    0.051600] kvm-clock: cpu 1, msr 1:3ff87041, secondary cpu clock
[    0.065999] KVM setup async PF for cpu 1
 #2[    0.065999] kvm-stealtime: cpu 1, msr 13fc8d240
[    0.066008] kvm-clock: cpu 2, msr 1:3ff87081, secondary cpu clock
[    0.078901] KVM setup async PF for cpu 2
 #3 OK
[    0.078917] kvm-stealtime: cpu 2, msr 13fd0d240
[    0.078909] kvm-clock: cpu 3, msr 1:3ff870c1, secondary cpu clock
[    0.092236] Brought up 4 CPUs
[    0.092228] KVM setup async PF for cpu 3
[    0.092228] kvm-stealtime: cpu 3, msr 13fd8d240
[    0.093002] smpboot: Total of 4 processors activated (20000.80 BogoMIPS)
[    0.095219] devtmpfs: initialized
[    0.099595] EVM: security.selinux
[    0.100001] EVM: security.ima
[    0.100572] EVM: security.capability
[    0.102633] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.104105] NET: Registered protocol family 16
[    0.106061] ACPI: bus type PCI registered
[    0.106822] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.107132] PCI: Using configuration type 1 for base access
[    0.108001] PCI: Using configuration type 1 for extended access
[    0.110501] ACPI: Added _OSI(Module Device)
[    0.111003] ACPI: Added _OSI(Processor Device)
[    0.112002] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.113002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.116225] ACPI: Interpreter enabled
[    0.117005] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.119002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.121002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
[    0.122435] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
[    0.125020] ACPI: (supports S0 S5)
[    0.125689] ACPI: Using IOAPIC for interrupt routing
[    0.126049] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131904] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.132008] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.133008] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.134424] acpiphp: Slot [2] registered
[    0.135029] acpiphp: Slot [3] registered
[    0.136036] acpiphp: Slot [5] registered
[    0.136821] acpiphp: Slot [6] registered
[    0.137028] acpiphp: Slot [7] registered
[    0.138027] acpiphp: Slot [8] registered
[    0.139027] acpiphp: Slot [9] registered
[    0.139806] acpiphp: Slot [10] registered
[    0.140027] acpiphp: Slot [11] registered
[    0.141029] acpiphp: Slot [12] registered
[    0.142027] acpiphp: Slot [13] registered
[    0.143027] acpiphp: Slot [14] registered
[    0.143818] acpiphp: Slot [15] registered
[    0.144027] acpiphp: Slot [16] registered
[    0.145027] acpiphp: Slot [17] registered
[    0.146027] acpiphp: Slot [18] registered
[    0.147028] acpiphp: Slot [19] registered
[    0.148002] acpiphp: Slot [20] registered
[    0.148792] acpiphp: Slot [21] registered
[    0.149027] acpiphp: Slot [22] registered
[    0.150027] acpiphp: Slot [23] registered
[    0.151027] acpiphp: Slot [24] registered
[    0.151820] acpiphp: Slot [25] registered
[    0.152027] acpiphp: Slot [26] registered
[    0.153029] acpiphp: Slot [27] registered
[    0.154027] acpiphp: Slot [28] registered
[    0.155030] acpiphp: Slot [29] registered
[    0.156002] acpiphp: Slot [30] registered
[    0.156805] acpiphp: Slot [31] registered
[    0.157014] PCI host bridge to bus 0000:00
[    0.158003] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.159003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.160003] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.161003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.162003] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.181041] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.182003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.183003] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.184002] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.186413] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.187015] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.321819] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.322474] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.324139] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.325445] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.326379] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.328232] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.329114] vgaarb: loaded
[    0.330079] SCSI subsystem initialized
[    0.330833] ACPI: bus type USB registered
[    0.331024] usbcore: registered new interface driver usbfs
[    0.332011] usbcore: registered new interface driver hub
[    0.333055] usbcore: registered new device driver usb
[    0.334102] PCI: Using ACPI for IRQ routing
[    0.336205] NetLabel: Initializing
[    0.336875] NetLabel:  domain hash size = 128
[    0.337002] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.338015] NetLabel:  unlabeled traffic allowed by default
[    0.339037] Switching to clocksource kvm-clock
[    0.349053] pnp: PnP ACPI init
[    0.349685] ACPI: bus type PNP registered
[    0.351179] pnp: PnP ACPI: found 5 devices
[    0.351972] ACPI: bus type PNP unregistered
[    0.360359] NET: Registered protocol family 2
[    0.361452] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.362959] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.364330] TCP: Hash tables configured (established 32768 bind 32768)
[    0.365603] TCP: reno registered
[    0.366236] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.367410] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.368698] NET: Registered protocol family 1
[    0.369555] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.370702] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.371836] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.424378] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.529577] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.634895] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    0.740081] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.793550] Unpacking initramfs...
[    5.535774] Freeing initrd memory: 37608k freed
[    5.557584] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.558900] software IO TLB [mem 0xbbfd9000-0xbffd9000] (64MB) mapped at [ffff8800bbfd9000-ffff8800bffd8fff]
[    5.561490] microcode: CPU0: patch_level=0x01000065
[    5.562441] microcode: CPU1: patch_level=0x01000065
[    5.563403] microcode: CPU2: patch_level=0x01000065
[    5.564370] microcode: CPU3: patch_level=0x01000065
[    5.565503] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.567318] sha1_ssse3: Using AVX optimized SHA-1 implementation
[    5.568541] sha256_ssse3: Using AVX optimized SHA-256 implementation
[    5.569991] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    5.571221] Initialise system trusted keyring
[    5.572108] audit: initializing netlink socket (disabled)
[    5.573135] type=2000 audit(1473264998.319:1): initialized
[    5.598882] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    5.600079] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    5.602828] zpool: loaded
[    5.603344] zbud: loaded
[    5.604084] VFS: Disk quotas dquot_6.5.2
[    5.604852] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    5.606291] msgmni has been set to 7900
[    5.607083] Key type big_key registered
[    5.608881] NET: Registered protocol family 38
[    5.609737] Key type asymmetric registered
[    5.610504] Asymmetric key parser 'x509' registered
[    5.611457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    5.612904] io scheduler noop registered
[    5.613653] io scheduler deadline registered (default)
[    5.614633] io scheduler cfq registered
[    5.615488] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.616524] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    5.617905] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    5.619264] ACPI: Power Button [PWRF]
[    5.620137] GHES: HEST is not enabled!
[    5.620906] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.652086] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    5.653981] Non-volatile memory driver v1.3
[    5.654911] Linux agpgart interface v0.103
[    5.655939] crash memory driver: version 1.1
[    5.656882] rdac: device handler registered
[    5.657859] hp_sw: device handler registered
[    5.658746] emc: device handler registered
[    5.659608] alua: device handler registered
[    5.660473] libphy: Fixed MDIO Bus: probed
[    5.661304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.662509] ehci-pci: EHCI PCI platform driver
[    5.715926] ehci-pci 0000:00:04.7: EHCI Host Controller
[    5.716972] ehci-pci 0000:00:04.7: new USB bus registered, assigned bus number 1
[    5.718691] ehci-pci 0000:00:04.7: irq 11, io mem 0xfebc2000
[    5.725031] ehci-pci 0000:00:04.7: USB 2.0 started, EHCI 1.00
[    5.726281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.727662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.729136] usb usb1: Product: EHCI Host Controller
[    5.730138] usb usb1: Manufacturer: Linux 3.10.0-327.el7.x86_64 ehci_hcd
[    5.731493] usb usb1: SerialNumber: 0000:00:04.7
[    5.732555] hub 1-0:1.0: USB hub found
[    5.733341] hub 1-0:1.0: 6 ports detected
[    5.734435] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.735707] ohci-pci: OHCI PCI platform driver
[    5.736644] uhci_hcd: USB Universal Host Controller Interface driver
[    5.790897] uhci_hcd 0000:00:04.0: UHCI Host Controller
[    5.792023] uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    5.793549] uhci_hcd 0000:00:04.0: detected 2 ports
[    5.794626] uhci_hcd 0000:00:04.0: irq 11, io base 0x0000c080
[    5.795901] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.797309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.798739] usb usb2: Product: UHCI Host Controller
[    5.799900] usb usb2: Manufacturer: Linux 3.10.0-327.el7.x86_64 uhci_hcd
[    5.801168] usb usb2: SerialNumber: 0000:00:04.0
[    5.802281] hub 2-0:1.0: USB hub found
[    5.803071] hub 2-0:1.0: 2 ports detected
[    5.856281] uhci_hcd 0000:00:04.1: UHCI Host Controller
[    5.857488] uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
[    5.858932] uhci_hcd 0000:00:04.1: detected 2 ports
[    5.860093] uhci_hcd 0000:00:04.1: irq 10, io base 0x0000c0a0
[    5.861784] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.863221] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.864810] usb usb3: Product: UHCI Host Controller
[    5.865983] usb usb3: Manufacturer: Linux 3.10.0-327.el7.x86_64 uhci_hcd
[    5.867681] usb usb3: SerialNumber: 0000:00:04.1
[    5.868823] hub 3-0:1.0: USB hub found
[    5.869596] hub 3-0:1.0: 2 ports detected
[    5.923681] uhci_hcd 0000:00:04.2: UHCI Host Controller
[    5.924833] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 4
[    5.926379] uhci_hcd 0000:00:04.2: detected 2 ports
[    5.927484] uhci_hcd 0000:00:04.2: irq 10, io base 0x0000c0c0
[    5.928793] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.930234] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.931619] usb usb4: Product: UHCI Host Controller
[    5.932811] usb usb4: Manufacturer: Linux 3.10.0-327.el7.x86_64 uhci_hcd
[    5.934167] usb usb4: SerialNumber: 0000:00:04.2
[    5.935381] hub 4-0:1.0: USB hub found
[    5.936169] hub 4-0:1.0: 2 ports detected
[    5.937264] usbcore: registered new interface driver usbserial
[    5.938475] usbcore: registered new interface driver usbserial_generic
[    5.939855] usbserial: USB Serial support registered for generic
[    5.941140] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.943751] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.944742] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.945913] mousedev: PS/2 mouse device common for all mice
[    5.947386] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.949269] rtc_cmos 00:00: RTC can wake from S4
[    5.951357] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    5.953286] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram
[    5.954609] cpuidle: using governor menu
[    5.955512] hidraw: raw HID events driver (C) Jiri Kosina
[    5.956878] usbcore: registered new interface driver usbhid
[    5.958000] usbhid: USB HID core driver
[    5.958835] drop_monitor: Initializing network drop monitor service
[    5.960142] TCP: cubic registered
[    5.960800] Initializing XFRM netlink socket
[    5.961688] NET: Registered protocol family 10
[    5.962962] NET: Registered protocol family 17
[    5.964285] Loading compiled-in X.509 certificates
[    5.965281] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[    5.967175] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
[    5.969890] Loaded X.509 cert 'CentOS Linux kernel signing key: 79ad886a113ca0223526336c0f825b8a94296ab3'
[    5.971994] registered taskstats version 1
[    5.975960] Key type trusted registered
[    5.979670] Key type encrypted registered
[    5.982794] IMA: No TPM chip found, activating TPM-bypass!
[    5.984953] rtc_cmos 00:00: setting system clock to 2016-09-07 16:16:39 UTC (1473264999)
[    5.988084] Freeing unused kernel memory: 1620k freed
[    5.994937] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.998316] systemd[1]: Detected virtualization kvm.
[    5.999372] systemd[1]: Detected architecture x86-64.
[    6.000405] systemd[1]: Running in initial RAM disk.

Welcome to CentOS Linux 7 (Core) dracut-033-359.el7 (Initramfs)!

[    6.003086] systemd[1]: No hostname configured.
[    6.003966] systemd[1]: Set hostname to <localhost>.
[    6.005020] systemd[1]: Initializing machine ID from KVM UUID.
[    6.040050] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    6.040459] systemd[1]: Cannot add dependency job for unit multipathd.service, ignoring: Unit blk-availability.service failed to load: No such file or directory.
[  OK  ] Reached target Local File Systems.
[    6.045225] systemd[1]: Reached target Local File Systems.
[    6.046339] systemd[1]: Starting Local File Systems.
[  OK  ] Reached target Swap.
[    6.048438] systemd[1]: Reached target Swap.
[    6.049341] systemd[1]: Starting Swap.
[  OK  ] Created slice -.slice.
[    6.051617] systemd[1]: Created slice -.slice.
[    6.052624] systemd[1]: Starting -.slice.
[  OK  ] Listening on udev Control Socket.
[    6.054856] systemd[1]: Listening on udev Control Socket.
[    6.055951] systemd[1]: Starting udev Control Socket.
[  OK  ] Listening on Journal Socket.
[    6.058314] systemd[1]: Listening on Journal Socket.
[    6.059321] systemd[1]: Starting Journal Socket.
[  OK  ] Listening on udev Kernel Socket.
[    6.061583] systemd[1]: Listening on udev Kernel Socket.
[    6.062654] systemd[1]: Starting udev Kernel Socket.
[  OK  ] Created slice System Slice.
[    6.064968] systemd[1]: Created slice System Slice.
[    6.065958] systemd[1]: Starting System Slice.
[    6.067492] systemd[1]: Starting Setup Virtual Console...
         Starting Setup Virtual Console...
[    6.069985] systemd[1]: Started Load Kernel Modules.
[    6.071565] systemd[1]: Starting Device-Mapper Multipath Device Controller...
         Starting Device-Mapper Multipath Device Controller...
[    6.074905] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    6.077262] systemd[1]: Started dracut ask for additional cmdline parameters.
[    6.079051] device-mapper: uevent: version 1.0.3
[    6.079499] systemd[1]: Starting dracut cmdline hook...
[    6.081040] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
         Starting dracut cmdline hook...
[    6.084233] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.086168] device-mapper: multipath: version 1.9.0 loaded
         Starting Create list of required st... nodes for the current kernel...
[  OK  ] Reached target Slices.
[    6.090011] systemd[1]: Reached target Slices.
[    6.090918] systemd[1]: Starting Slices.
[  OK  ] Reached target Encrypted Volumes.
[    6.093043] systemd[1]: Reached target Encrypted Volumes.
[    6.094129] systemd[1]: Starting Encrypted Volumes.
[    6.095820] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[  OK  ] Reached target Timers.
[    6.099144] systemd[1]: Reached target Timers.
[    6.100060] systemd[1]: Starting Timers.
[  OK  ] Started Setup Virtual Console.
[    6.102675] systemd[1]: Started Setup Virtual Console.
[  OK  ] Started Apply Kernel Variables.
[    6.105994] systemd[1]: Started Apply Kernel Variables.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[    6.109106] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.115547] systemd[1]: PID file /run/multipathd/multipathd.pid not readable (yet?) after start.
[  OK  ] Started Journal Service.
[    6.119042] systemd[1]: Started Journal Service.
[  OK  ] Started Device-Mapper Multipath Device Controller.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
[    6.162101] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[    6.163695] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[    6.165131] usb 1-1: Product: QEMU USB Tablet
[    6.166053] usb 1-1: Manufacturer: QEMU
[    6.166882] usb 1-1: SerialNumber: 42
[    6.167882] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    6.172775] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:04.7/usb1/1-1/1-1:1.0/input/input2
[    6.174906] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:04.7-1/input0
[    6.207671] dracut-cmdline[111]: Warning: 'serial' is deprecated and has been removed.
[    6.209828] dracut-cmdline[111]: Warning: To change the console use 'console=' instead.
[    6.216326] dracut-cmdline[111]: Warning: 'method=' is deprecated. Using 'repo=http://mirror.yandex.ru/centos/7/os/x86_64/' instead.
[  OK  ] Started dracut cmdline hook.
         Starting dracut pre-udev hook...
         Starting Open-iSCSI...
[    6.447931] Loading iSCSI transport class v2.0-870.
[  OK  ] Started Open-iSCSI.
[    6.462363] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.470208] iscsi: registered transport (tcp)
[    6.513644] FDC 0 is a S82078B
[    6.520041] No iBFT detected.
[    6.523447] md: raid0 personality registered for level 0
[    6.527907] md: raid1 personality registered for level 1
[    6.531693] async_tx: api initialized (async)
[    6.533779] xor: automatically using best checksumming function:
[    6.544009]    avx       :  3376.000 MB/sec
[    6.564014] raid6: sse2x1   gen()  4867 MB/s
[    6.581016] raid6: sse2x2   gen()  8109 MB/s
[    6.598015] raid6: sse2x4   gen()  9117 MB/s
[    6.598824] raid6: using algorithm sse2x4 gen() (9117 MB/s)
[    6.599901] raid6: using ssse3x2 recovery algorithm
[    6.607502] md: raid6 personality registered for level 6
[    6.608542] md: raid5 personality registered for level 5
[    6.609584] md: raid4 personality registered for level 4
[    6.617356] md: raid10 personality registered for level 10
[    6.621121] md: linear personality registered for level -1
[    6.641412] device-mapper: multipath round-robin: version 1.0.0 loaded
[    6.680885] RPC: Registered named UNIX socket transport module.
[    6.682046] RPC: Registered udp transport module.
[    6.682932] RPC: Registered tcp transport module.
[    6.683837] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  OK  ] Started dracut pre-udev hook.
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.
         Starting dracut pre-trigger hook...
[    6.833431] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[  OK  ] Started dracut pre-trigger hook.
         Starting udev Coldplug all Devices...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
[  OK  ] Reached target Sockets.
         Starting dracut initqueue hook...
         Starting Show Plymouth Boot Screen...
         Mounting Configuration File System...
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
[    7.037837] AES CTR mode by8 optimization enabled
[    7.046457] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    7.066549] alg: No test for crc32 (crc32-pclmul)
[    7.136198] dracut-initqueue[565]: RTNETLINK answers: File exists
[    7.255139] scsi host0: ata_piix
[    7.258182] scsi host1: ata_piix
[    7.260176] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
[    7.262350] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
[    7.262366]  vda: unknown partition table