gistfile1.txt

    1.059344] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.070451] Freeing unused kernel memory: 5308K (ffffffff81f2b000 - ffffffff8245a000)
[    1.070780] Write protecting the kernel read-only data: 14336k
[    1.073873] Freeing unused kernel memory: 448K (ffff880002390000 - ffff880002400000)
[    1.079941] Freeing unused kernel memory: 1096K (ffff8800026ee000 - ffff880002800000)
[    1.090526] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.428589] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    1.607054] hub 1-2:1.0: USB hub found
[    1.608214] hub 1-2:1.0: 4 ports detected
[    1.645609] tsc: Refined TSC clocksource calibration: 1833.333 MHz
[    1.649895] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x34da54753aa, max_idle_ns: 881590618787 ns
[    1.779120] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[    1.782083] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[    1.806014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.827279] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    1.895597] usb 1-2.2: new full-speed USB device number 4 using xhci_hcd
[    2.005813] EXT4-fs (sda2): re-mounted. Opts: (null)
[    2.028003] aufs au_opts_verify:1606:init[1]: dirperm1 breaks the protection by the permission bits on the lower branch
[    2.052322] usb 1-2.3: new high-speed USB device number 5 using xhci_hcd
[    2.220437] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    2.226759] systemd[1]: Detected architecture x86-64.
[    2.241634] systemd[1]: Set hostname to <intel-corei7-64>.
[    2.245981] systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
[    2.248564] systemd[1]: Set hardware watchdog to 10s.
[    2.302406] systemd[1]: [/lib/systemd/system/systemd-ask-password-plymouth.service:12] Executable path is not absolute, ignoring: --watch --plymouth
[    2.307825] systemd[1]: systemd-ask-password-plymouth.service: Service lacks both ExecStart= and ExecStop= setting. Refusing.
[    2.339509] systemd[1]: mnt-state.mount: Unit is bound to inactive unit dev-disk-by\x2dlabel-resin\x2dstate.device. Stopping, too.
[    2.382736] systemd[1]: Reached target Remote File Systems.
[    2.391352] systemd[1]: Listening on udev Kernel Socket.
[    2.540745] Intel(R) Wireless WiFi driver for Linux
[    2.540746] Copyright(c) 2003- 2015 Intel Corporation
[    2.670135] clocksource: Switched to clocksource tsc
[    2.863580] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[    2.865260] mei_txe 0000:00:1a.0: PCI INT A: not connected
[    2.887342] EFI Variables Facility v0.08 2004-May-17
[    2.891245] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[    2.893916] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.894065] usbcore: registered new interface driver cdc_acm
[    2.894067] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.899660] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff81a988a0)
[    2.913998] usbcore: registered new interface driver cdc_wdm
[    2.926424] qmi_wwan 1-2.3:1.4: cdc-wdm0: USB WDM device
[    2.926715] qmi_wwan 1-2.3:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-2.3, WWAN/QMI device, 0a:e8:ab:30:cb:dc
[    2.926755] usbcore: registered new interface driver qmi_wwan