/gist:5451839bf9d69043f848
Secret
Created Jul 10, 2015
| smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.19.0-15-generic] (local build) | |
| Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: HGST Travelstar 7K1000 | |
| Device Model: HGST HTS721010A9E630 | |
| Serial Number: JG40006PGMXHRC | |
| LU WWN Device Id: 5 000cca 6acc90e10 | |
| Firmware Version: JB0OA3B0 | |
| User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 6 | |
| SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Fri Jul 10 22:21:16 2015 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 45) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 174) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0007 208 208 033 Pre-fail Always - 1 | |
| 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2105 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 3790 | |
| 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1424 | |
| 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 145 | |
| 193 Load_Cycle_Count 0x0012 086 086 000 Old_age Always - 143194 | |
| 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 14/56) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | |
| 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short captive Completed without error 00% 0 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment