gistfile1.txt

[  254.571660] sky2 0000:09:00.0 p2p1: disabling interface
[  254.783710] wlan0: deauthenticating from 00:19:e0:a4:24:b2 by local choice (reason=3)
[  254.785718] cfg80211: Calling CRDA to update world regulatory domain
[  254.806001] cfg80211: World regulatory domain updated:
[  254.806048] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  254.806054] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  254.806058] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  254.806062] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  254.806066] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  254.806070] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  254.806434] cfg80211: Calling CRDA for country: HU
[  254.813620] cfg80211: Regulatory domain changed to country: HU
[  254.813626] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  254.813642] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  254.813646] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  254.813650] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  254.813654] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[  254.813658] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  254.891109] PM: Syncing filesystems ... done.
[  254.906703] PM: Preparing system for mem sleep
[  255.055562] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  255.067399] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  255.078365] PM: Entering mem sleep
[  255.078380] Suspending console(s) (use no_console_suspend to debug)
[  255.078845] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  255.079257] sd 0:0:0:0: [sda] Stopping disk
[  255.499352] PM: suspend of devices complete after 420.634 msecs
[  255.500034] PM: late suspend of devices complete after 0.674 msecs
[  255.676973] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[  255.690238] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[  255.693763] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[  255.696661] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[  255.698805] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[  255.712355] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[  255.716076] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[  255.716128] PM: noirq suspend of devices complete after 216.091 msecs
[  255.716341] ACPI: Preparing to enter system sleep state S3
[  255.721891] PM: Saving platform NVS memory
[  255.721892] Disabling non-boot CPUs ...
[  255.723293] smpboot: CPU 1 is now offline
[  255.723702] CPU 1 offline: Remove Rx thread
[  255.723753] ACPI: Low-level resume complete
[  255.723753] PM: Restoring platform NVS memory
[  255.723753] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa4
[  255.723753] Enabling non-boot CPUs ...
[  255.724075] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  255.723005] CPU1 microcode updated early to revision 0xa4, date = 2010-10-02
[  255.735505] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa4
[  255.735808] bnx2i: CPU 1 online: Create Rx thread
[  255.735881] CPU1 is up
[  255.737066] ACPI: Waking up from system sleep state S3
[  255.770077] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[  255.775948] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[  255.787919] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[  255.801498] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[  255.804343] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[  255.806151] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[  255.820280] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[  256.004118] firewire_ohci 0000:02:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
[  256.004122] firewire_ohci 0000:02:09.0: MMC cards are now supported by standard SDHCI controller
[  256.026491] PM: noirq resume of devices complete after 278.702 msecs
[  256.026889] PM: early resume of devices complete after 0.343 msecs
[  256.026947] i915 0000:00:02.0: setting latency timer to 64
[  256.027349] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[  256.027390] usb usb3: root hub lost power or was reset
[  256.027655] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[  256.027694] usb usb4: root hub lost power or was reset
[  256.027958] ehci-pci 0000:00:1a.7: setting latency timer to 64
[  256.028346] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[  256.050350] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  256.050380] usb usb5: root hub lost power or was reset
[  256.050492] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  256.050521] usb usb6: root hub lost power or was reset
[  256.050631] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  256.050660] usb usb7: root hub lost power or was reset
[  256.050771] ehci-pci 0000:00:1d.7: setting latency timer to 64
[  256.050793] pci 0000:00:1e.0: setting latency timer to 64
[  256.050900] ata_piix 0000:00:1f.1: setting latency timer to 64
[  256.050913] ahci 0000:00:1f.2: setting latency timer to 64
[  256.052361] ata5: port disabled--ignoring
[  256.053137] ata4.00: _GTF evaluation failed (AE 0x1001)
[  256.213490] ata4.00: configured for UDMA/33
[  256.356206] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
[  256.357185] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  256.359176] ata3: SATA link down (SStatus 0 SControl 300)
[  256.605092] firewire_core 0000:02:09.0: rediscovered device fw0
[  256.702478] ata1.00: configured for UDMA/133
[  256.702560] sd 0:0:0:0: [sda] Starting disk
[  257.089482] PM: resume of devices complete after 1062.581 msecs
[  257.090451] PM: Finishing wakeup.
[  257.090455] Restarting tasks ... done.
[  257.106322] video LNXVIDEO:00: Restoring backlight state
[  257.249239] sky2 0000:09:00.0 p2p1: enabling interface
[  257.254834] IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
[  257.302828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  257.799471] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
[  259.361552] wlan0: authenticate with 00:19:e0:a4:24:b2
[  259.365227] wlan0: send auth to 00:19:e0:a4:24:b2 (try 1/3)
[  259.366655] wlan0: authenticated
[  259.366950] ath5k 0000:0b:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  259.366959] ath5k 0000:0b:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  259.368406] wlan0: associate with 00:19:e0:a4:24:b2 (try 1/3)
[  259.370635] wlan0: RX AssocResp from 00:19:e0:a4:24:b2 (capab=0x431 status=0 aid=2)
[  259.371167] wlan0: associated
[  259.371239] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready