This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
8021q: 802.1Q VLAN Support v1.8 | |
sctp: Hash tables configured (established 65536 bind 65536) | |
Key type dns_resolver registered | |
Key type ceph registered | |
libceph: loaded (mon/osd proto 15/24) | |
openvswitch: Open vSwitch switching datapath | |
registered taskstats version 1 | |
console [netcon0] enabled | |
netconsole: network logging started | |
rtc_cmos 00:03: setting system clock to 2016-09-15 09:31:27 UTC (1473931887) | |
usb 2-1: new high-speed USB device number 2 using ehci-pci | |
hub 2-1:1.0: USB hub found | |
hub 2-1:1.0: 8 ports detected | |
floppy0: no floppy controllers found | |
scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 MS2O PQ: 0 ANSI: 5 | |
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) | |
sd 0:0:0:0: [sda] 4096-byte physical blocks | |
sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
sd 0:0:0:0: [sda] Write Protect is off | |
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
sda: sda1 sda2 sda3 | |
sd 0:0:0:0: [sda] Attached SCSI disk | |
md: Waiting for all devices to be available before autodetect | |
md: If you don't use raid, use raid=noautodetect | |
md: Autodetecting RAID arrays. | |
md: Scanned 0 and added 0 devices. | |
md: autorun ... | |
md: ... autorun DONE. | |
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) | |
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (244) | |
EXT4-fs (sda1): INFO: recovery required on readonly filesystem | |
EXT4-fs (sda1): write access will be enabled during recovery | |
EXT4-fs (sda1): recovery complete | |
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) | |
VFS: Mounted root (ext4 filesystem) readonly on device 8:1. | |
devtmpfs: mounted | |
Freeing unused kernel memory: 912k freed | |
init: ureadahead main process (2037) terminated with status 5 | |
systemd-udevd[2131]: starting version 204 | |
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X | |
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X | |
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None | |
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO | |
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro | |
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) | |
Adding 523260k swap on /dev/sda3. Priority:-1 extents:1 across:523260k | |
init: failsafe main process (3638) killed by TERM signal |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Jan 4 17:47:04 ns388768 kernel: ata1.00: status: { DRDY ERR } | |
Jan 4 17:47:04 ns388768 kernel: ata1.00: error: { IDNF } | |
Jan 4 17:47:04 ns388768 kernel: ata1.00: configured for UDMA/133 | |
Jan 4 17:47:04 ns388768 kernel: ata1: EH complete | |
Jan 4 17:47:12 ns388768 kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 | |
Jan 4 17:47:12 ns388768 kernel: ata1.00: irq_stat 0x40000008 | |
Jan 4 17:47:12 ns388768 kernel: ata1.00: failed command: WRITE FPDMA QUEUED | |
Jan 4 17:47:12 ns388768 kernel: ata1.00: cmd 61/00:38:00:b8:48/04:00:72:00:00/40 tag 7 ncq 524288 out | |
Jan 4 17:47:12 ns388768 kernel: res 51/10:88:78:b8:48/00:03:72:00:00/40 Emask 0x481 (invalid argument) <F> | |
Jan 4 17:47:12 ns388768 kernel: ata1.00: status: { DRDY ERR } | |
Jan 4 17:47:12 ns388768 kernel: ata1.00: error: { IDNF } | |
Jan 4 17:47:12 ns388768 kernel: ata1.00: configured for UDMA/133 | |
Jan 4 17:47:12 ns388768 kernel: ata1: EH complete | |
Jan 4 17:49:43 ns388768 kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 | |
Jan 4 17:49:43 ns388768 kernel: ata1.00: irq_stat 0x40000008 | |
Jan 4 17:49:43 ns388768 kernel: ata1.00: failed command: WRITE FPDMA QUEUED | |
Jan 4 17:49:43 ns388768 kernel: ata1.00: cmd 61/00:08:20:42:5a/04:00:72:00:00/40 tag 1 ncq 524288 out | |
Jan 4 17:49:43 ns388768 kernel: res 51/10:58:c8:42:5a/00:03:72:00:00/40 Emask 0x481 (invalid argument) <F> | |
Jan 4 17:49:43 ns388768 kernel: ata1.00: status: { DRDY ERR } | |
Jan 4 17:49:43 ns388768 kernel: ata1.00: error: { IDNF } | |
Jan 4 17:49:43 ns388768 kernel: ata1.00: configured for UDMA/133 | |
Jan 4 17:49:43 ns388768 kernel: ata1: EH complete | |
Jan 4 17:49:52 ns388768 kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 | |
Jan 4 17:49:52 ns388768 kernel: ata1.00: irq_stat 0x40000008 | |
Jan 4 17:49:52 ns388768 kernel: ata1.00: failed command: WRITE FPDMA QUEUED | |
Jan 4 17:49:52 ns388768 kernel: ata1.00: cmd 61/00:e8:20:42:5a/04:00:72:00:00/40 tag 29 ncq 524288 out | |
Jan 4 17:49:52 ns388768 kernel: res 51/10:60:c0:42:5a/00:03:72:00:00/40 Emask 0x481 (invalid argument) <F> | |
Jan 4 17:49:52 ns388768 kernel: ata1.00: status: { DRDY ERR } | |
Jan 4 17:49:52 ns388768 kernel: ata1.00: error: { IDNF } | |
Jan 4 17:49:52 ns388768 kernel: ata1.00: configured for UDMA/133 | |
Jan 4 17:49:52 ns388768 kernel: ata1: EH complete | |
Jan 4 17:50:06 ns388768 kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 | |
Jan 4 17:50:06 ns388768 kernel: ata1.00: irq_stat 0x40000008 | |
Jan 4 17:50:06 ns388768 kernel: ata1.00: failed command: WRITE FPDMA QUEUED | |
Jan 4 17:50:06 ns388768 kernel: ata1.00: cmd 61/00:78:00:04:5b/04:00:72:00:00/40 tag 15 ncq 524288 out | |
Jan 4 17:50:06 ns388768 kernel: res 51/10:60:a0:05:5b/00:02:72:00:00/40 Emask 0x481 (invalid argument) <F> | |
Jan 4 17:50:06 ns388768 kernel: ata1.00: status: { DRDY ERR } | |
Jan 4 17:50:06 ns388768 kernel: ata1.00: error: { IDNF } | |
Jan 4 17:50:06 ns388768 kernel: ata1.00: configured for UDMA/133 | |
Jan 4 17:50:06 ns388768 kernel: ata1: EH complete | |
Jan 4 17:51:33 ns388768 postfix/smtpd[22231]: connect from unknown[unknown] | |
Jan 4 17:51:33 ns388768 postfix/smtpd[22243]: connect from unknown[195.22.126.244] | |
Jan 4 17:51:38 ns388768 postfix/smtpd[22231]: lost connection after CONNECT from unknown[unknown] | |
Jan 4 17:51:38 ns388768 postfix/smtpd[22231]: disconnect from unknown[unknown] | |
Jan 4 17:51:38 ns388768 postfix/smtpd[22243]: lost connection after CONNECT from unknown[195.22.126.244] | |
Jan 4 17:51:38 ns388768 postfix/smtpd[22243]: disconnect from unknown[195.22.126.244] | |
Jan 4 17:52:26 ns388768 postfix/smtpd[22231]: connect from unknown[197.14.14.150] | |
Jan 4 17:52:26 ns388768 postfix/smtpd[22231]: lost connection after CONNECT from unknown[197.14.14.150] | |
Jan 4 17:52:26 ns388768 postfix/smtpd[22231]: disconnect from unknown[197.14.14.150] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment