-
-
Save anonymous/9a7bd305b1f6fbdd449e to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.19.0-15-generic] (local build) | |
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Crucial/Micron RealSSD C300/M500 | |
Device Model: Crucial_CT240M500SSD3 | |
Serial Number: 1351095F8F0D | |
LU WWN Device Id: 5 00a075 1095f8f0d | |
Firmware Version: MU03 | |
User Capacity: 240,057,409,536 bytes [240 GB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: Solid State Device | |
Form Factor: < 1.8 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) | |
Local Time is: Fri Jul 10 22:23:52 2015 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x80) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 16) The self-test routine was aborted by | |
the host. | |
Total time to complete Offline | |
data collection: ( 1115) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 18) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 3) minutes. | |
SCT capabilities: (0x0035) SCT Status supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 | |
5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 | |
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5580 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 822 | |
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 | |
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 | |
173 Wear_Leveling_Count 0x0032 099 099 000 Old_age Always - 40 | |
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 332 | |
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 4066 | |
183 SATA_Iface_Downshift 0x0032 100 100 000 Old_age Always - 1 | |
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 | |
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
194 Temperature_Celsius 0x0022 043 019 000 Old_age Always - 57 (Min/Max 0/81) | |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16 | |
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 | |
202 Percent_Lifetime_Used 0x0031 099 099 000 Pre-fail Offline - 1 | |
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 | |
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
246 Total_Host_Sector_Write 0x0032 100 100 --- Old_age Always - 6370807274 | |
247 Host_Program_Page_Count 0x0032 100 100 --- Old_age Always - 204622467 | |
248 Bckgnd_Program_Page_Cnt 0x0032 100 100 --- Old_age Always - 449884032 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Self-test routine in progress 90% 5579 - | |
# 2 Vendor (0xff) Completed without error 00% 5576 - | |
# 3 Vendor (0xff) Completed without error 00% 5573 - | |
# 4 Vendor (0xff) Completed without error 00% 5571 - | |
# 5 Vendor (0xff) Completed without error 00% 5569 - | |
# 6 Vendor (0xff) Completed without error 00% 5569 - | |
# 7 Vendor (0xff) Completed without error 00% 5568 - | |
# 8 Vendor (0xff) Completed without error 00% 5567 - | |
# 9 Vendor (0xff) Completed without error 00% 4722 - | |
#10 Vendor (0xff) Completed without error 00% 5567 - | |
#11 Vendor (0xff) Completed without error 00% 5566 - | |
#12 Vendor (0xff) Completed without error 00% 5565 - | |
#13 Vendor (0xff) Completed without error 00% 5546 - | |
#14 Vendor (0xff) Completed without error 00% 5539 - | |
#15 Vendor (0xff) Completed without error 00% 5531 - | |
#16 Vendor (0xff) Completed without error 00% 5528 - | |
#17 Vendor (0xff) Completed without error 00% 5527 - | |
#18 Vendor (0xff) Completed without error 00% 5523 - | |
#19 Vendor (0xff) Completed without error 00% 5513 - | |
#20 Vendor (0xff) Completed without error 00% 5508 - | |
#21 Vendor (0xff) Completed without error 00% 5499 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment