Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
We.Retail dispatcher.any and httpd.conf
#To find the We.Retail Specific changes, search for "We.Retail Alert"
# Each farm configures a set of load balanced renders (i.e. remote servers)
/farms
{
# First farm entry
/website
{
# Request headers that should be forwarded to the remote server.
/clientheaders
{
# Forward all request headers that are end-to-end. If you want
# to forward a specific set of headers, you'll have to list
# them here.
"*"
}
# Hostname globbing for farm selection (virtual domain addressing)
/virtualhosts
{
# Entries will be compared against the "Host" request header
# and an optional request URL prefix.
#
# Examples:
#
# www.company.com
# intranet.*
# myhost:8888/mysite
"*"
}
# The load will be balanced among these render instances
/renders
{
/rend01
{
# Hostname or IP of the render
/hostname "127.0.0.1"
# Port of the render
/port "4503"
# Connect timeout in milliseconds, 0 to wait indefinitely
# /timeout "0"
}
}
# The filter section defines the requests that should be handled by the dispatcher.
#
# Entries can be either specified using globs, or elements of the request line:
#
# (1) globs will be compared against the entire request line, e.g.:
#
# /0001 { /type "deny" /glob "* /index.html *" }
#
# denies request "GET /index.html HTTP/1.1" but not "GET /index.html?a=b HTTP/1.1".
#
# (2) method/url/query/protocol/path/selectors/extension/suffix will be compared
# against the respective elements of the request line, e.g.:
#
# /0001 { /type "deny" /method "GET" /url "/index.html" }
#
# denies both "GET /index.html" and "GET /index.html?a=b HTTP/1.1".
#
# (3) all elements of the request line can also be specified as regular expressions,
# which are identified by using single quotes, e.g.
#
# /0001 { /type "allow" /method '(GET|HEAD)' }
#
# allows GET or HEAD requests, or:
#
# /0002 { /type "deny" /extension '()' }
#
# denies requests having no extension.
#
# Note: specifying elements of the request line is the preferred method.
#
/filter
{
# Deny everything first and then allow specific entries
/0001 { /type "deny" /glob "*" }
# Open consoles
# /0011 { /type "allow" /url "/admin/*" } # allow servlet engine admin
# /0012 { /type "allow" /url "/crx/*" } # allow content repository
# /0013 { /type "allow" /url "/system/*" } # allow OSGi console
# Allow non-public content directories
# /0021 { /type "allow" /url "/apps/*" } # allow apps access
# /0022 { /type "allow" /url "/bin/*" }
/0023 { /type "allow" /url "/content*" } # disable this rule to allow mapped content only
# /0024 { /type "allow" /url "/libs/*" }
# /0025 { /type "deny" /url "/libs/shindig/proxy*" } # if you enable /libs close access to proxy
# /0026 { /type "allow" /url "/home/*" }
# /0027 { /type "allow" /url "/tmp/*" }
# /0028 { /type "allow" /url "/var/*" }
# We.Retail Alert: Allows We.Retail clientlibs to pass through
/0029 { /type "allow" /url "/etc.clientlibs/*" }
# Enable extensions in non-public content directories, using a regular expression
# We.Retail Alert: Allows woff2|woff|tff to be requested for We.Retail
/0041
{
/type "allow"
/extension '(css|gif|ico|js|png|swf|jpe?g|woff2|woff|tff)'
}
# Enable features
/0062 { /type "allow" /url "/libs/cq/personalization/*" } # enable personalization
# Deny content grabbing, on all accessible pages, using regular expressions
/0081
{
/type "deny"
/selectors '((sys|doc)view|query|[0-9-]+)'
/extension '(json|xml)'
}
# Deny content grabbing for /content
/0082
{
/type "deny"
/path "/content"
/selectors '(feed|rss|pages|languages|blueprint|infinity|tidy)'
/extension '(json|xml|html)'
}
# We.Retail Alert: Allow We.Retail to request .cart.json info for the shopping cart information.
/0086 { /type "allow" /method "GET" /extension 'json' "*.cart.json" }
# /0087 { /type "allow" /method "GET" /extension 'json' "*.1.json" } # allow one-level json requests
}
# The cache section regulates what responses will be cached and where.
/cache
{
# The docroot must be equal to the document root of the webserver. The
# dispatcher will store files relative to this directory and subsequent
# requests may be "declined" by the dispatcher, allowing the webserver
# to deliver them just like static files.
/docroot "htdocs"
# Sets the level upto which files named ".stat" will be created in the
# document root of the webserver. When an activation request for some
# page is received, only files within the same subtree are affected
# by the invalidation.
# We.Retail Alert: Language node is is at a depth of 3
/statfileslevel "3"
# Flag indicating whether to cache responses to requests that contain
# authorization information.
# We.Retail Alert
/allowAuthorized "1"
# Flag indicating whether the dispatcher should serve stale content if
# no remote server is available.
#/serveStaleOnError "0"
# The rules section defines what responses should be cached based on
# the requested URL. Please note that only the following requests can
# lead to cacheable responses:
#
# - HTTP method is GET
# - URL has an extension
# - Request has no query string
# - Request has no "Authorization" header (unless allowAuthorized is 1)
/rules
{
/0000
{
# the globbing pattern to be compared against the url
# example: * -> everything
# : /foo/bar.* -> only the /foo/bar documents
# : /foo/bar/* -> all pages below /foo/bar
# : /foo/bar[./]* -> all pages below and /foo/bar itself
# : *.html -> all .html files
/glob "*"
/type "allow"
}
}
# The invalidate section defines the pages that are "invalidated" after
# any activation. Please note that the activated page itself and all
# related documents are flushed on an modification. For example: if the
# page /foo/bar is activated, all /foo/bar.* files are removed from the
# cache.
/invalidate
{
/0000
{
/glob "*"
/type "deny"
}
/0001
{
# Consider all HTML files stale after an activation.
/glob "*.html"
/type "allow"
}
/0002
{
/glob "/etc/segmentation.segment.js"
/type "allow"
}
/0003
{
/glob "*/analytics.sitecatalyst.js"
/type "allow"
}
}
# The allowedClients section restricts the client IP addresses that are
# allowed to issue activation requests.
/allowedClients
{
# Uncomment the following to restrict activation requests to originate
# from "localhost" only.
#
#/0000
# {
# /glob "*"
# /type "deny"
# }
#/0001
# {
# /glob "127.0.0.1"
# /type "allow"
# }
}
# The ignoreUrlParams section contains query string parameter names that
# should be ignored when determining whether some request's output can be
# cached or delivered from cache.
#
# In this example configuration, the "q" parameter will be ignored.
#/ignoreUrlParams
# {
# /0001 { /glob "*" /type "deny" }
# /0002 { /glob "q" /type "allow" }
# }
# Cache response headers next to a cached file. On the first request to
# an uncached resource, all headers matching one of the values found here
# are stored in a separate file, next to the cache file. On subsequent
# requests to the cached resource, the stored headers are added to the
# response.
#
# Note, that file globbing characters are not allowed here.
#
#/headers
# {
# "Cache-Control"
# "Content-Disposition"
# "Content-Type"
# "Expires"
# "Last-Modified"
# "X-Content-Type-Options"
# }
# A grace period defines the number of seconds a stale, auto-invalidated
# resource may still be served from the cache after the last activation
# occurring. Auto-invalidated resources are invalidated by any activation,
# when their path matches the /invalidate section above. This setting
# can be used in a setup, where a batch of activations would otherwise
# repeatedly invalidate the entire cache.
#
#/gracePeriod "2"
# Enable TTL evaluates the response headers from the backend, and if they
# contain a Cache-Control max-age or Expires date, an auxiliary, empty file
# next to the cache file is created, with modification time equal to the
# expiry date. When the cache file is requested past the modification time
# it is automatically re-requested from the backend.
#
# /enableTTL "1"
}
# The statistics sections dictates how the load should be balanced among the
# renders according to the media-type.
/statistics
{
/categories
{
/html
{
/glob "*.html"
}
/others
{
/glob "*"
}
}
}
# Authorization checker: before a page in the cache is delivered, a HEAD
# request is sent to the URL specified in /url with the query string
# '?uri='. If the response status is 200 (OK), the page is returned
# from the cache. Otherwise, the request is forwarded to the render and
# its response returned.
#
# Only pages matching the /filter section below are checked, all other pages
# get delivered unchecked.
#
# All header lines returned from the auth_checker's HEAD request that match
# the /headers section will be returned as well.
#
#/auth_checker
# {
# /url "/bin/permissioncheck.html"
# /filter
# {
# /0000
# {
# /glob "*"
# /type "deny"
# }
# /0001
# {
# /glob "*.html"
# /type "allow"
# }
# }
# /headers
# {
# /0000
# {
# /glob "*"
# /type "deny"
# }
# /0001
# {
# /glob "Set-Cookie:*"
# /type "allow"
# }
# }
# }
}
}
#To find the We.Retail Specific changes, search for "We.Retail Alert"
#Note this is specific to Apache 2.2 for Windows, but can be easily adapted for Mac or Linux
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files (x86)/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
# We.Retail Alert
NameVirtualHost *:80
<VirtualHost *:80>
# We.Retail Targeted Assets need to be rewritten
RewriteEngine on
RewriteRule (.*)jcr:content(.*) $1_jcr_content$2 [R=301,L]
RewriteLogLevel 2
RewriteLog "logs/rewrite.log"
</VirtualHost>
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
# We.Retail Alert: Uncomment rewrite module
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
# We.Retail Alert: Dispatcher Module
LoadModule dispatcher_module modules/disp_apache2.2.dll
# We.Retail Alert: Dispatcher IfModule
<IfModule disp_apache2.c>
# location of the configuration file. eg: 'conf/dispatcher.any'
DispatcherConfig conf/dispatcher.any
# location of the dispatcher log file. eg: 'logs/dispatcher.log'
DispatcherLog logs/dispatcher.log
# log level for the dispatcher log, can be either specified
# as a string or an integer (in parentheses)
# error(0): Errors
# warn(1): Warnings
# info(2): Infos
# debug(3): Debug
# trace(4): Trace
DispatcherLogLevel debug
# if turned on, the dispatcher looks like a normal module
# since build 5210, this setting has no effect, since it used to crash
# apache if set to 0.
DispatcherNoServerHeader On
# if turned on, request to / are not handled by the dispatcher
# use the mod_alias then for the correct mapping
DispatcherDeclineRoot Off
# Defines whether to use pre-processed URLs for all further processing by Dispatcher
DispatcherUseProcessedURL 0
# Defines how to support error codes for ErrorDocument handling
# 0 - Dispatcher spools all error responses to the client.
# 1 - Dispatcher does not spool an error response to the client (where the status
# code is greater or equal than 400), but passes the status code to Apache, which
# e.g. allows an ErrorDocument directive to process such a status code.
# Code Range - Specify a range of error codes for which the response is passed to Apache.
DispatcherPassError 0
# Specifies the keep-alive timeout, in seconds. Starting with Dispatcher version 4.2.0
# the default keep-alive value is 60. A value of 0 disables keep-alive
DispatcherKeepAliveTimeout 0
</IfModule>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin admin@WIN-JPGG1VNL4OD.localdomain
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName WIN-JPGG1VNL4OD.localdomain:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
# We.Retail Alert: Dispatcher Directory for /
<Directory />
<IfModule disp_apache2.c>
# enable dispatcher for ALL request. if this is too restrictive,
# move it to another location
SetHandler dispatcher-handler
</IfModule>
Options FollowSymLinks
AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://WIN-JPGG1VNL4OD.localdomain/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>
#
# "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://WIN-JPGG1VNL4OD.localdomain/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.