/gist:2782166
Created May 24, 2012
| LilArooni ~: sudo smartctl --all /dev/sda | |
| [sudo] password for david: | |
| smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-24-generic] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Momentus 7200.4 | |
| Device Model: ST9500420AS | |
| Serial Number: 5VJFNJAP | |
| LU WWN Device Id: 5 000c50 0455c9182 | |
| Firmware Version: 0003LVM1 | |
| User Capacity: 500,107,862,016 bytes [500 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: 8 | |
| ATA Standard is: ATA-8-ACS revision 4 | |
| Local Time is: Thu May 24 10:16:14 2012 COT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x7b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 109) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x103b) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 117 100 006 Pre-fail Always - 118892123 | |
| 3 Spin_Up_Time 0x0003 100 100 085 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 319585 | |
| 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 44659069943832 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 10 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 060 052 045 Old_age Always - 40 (Min/Max 29/48) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 123 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 150 | |
| 194 Temperature_Celsius 0x0022 040 048 000 Old_age Always - 40 (0 24 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 044 044 000 Old_age Always - 118892123 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 253111012687889 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 240 Head_Flying_Hours 0x0000 200 200 000 Old_age Offline - 244151710908416 | |
| 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 0 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 0 | |
| 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 16 - | |
| # 2 Conveyance offline Completed without error 00% 13 - | |
| # 3 Conveyance offline Completed without error 00% 12 - | |
| # 4 Extended offline Interrupted (host reset) 60% 11 - | |
| # 5 Short offline Completed without error 00% 7 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment