arooni

 ~/.c/f/functions  sudo apt-get install --reinstall libvte-2.90-9=1:0.34.9-1ubuntu2                                                          I
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  libvte-2.90-9
0 upgraded, 0 newly installed, 0 to remove and 1657 not upgraded.

arooni

LilArooni ~/downloads: sudo airodump-ng wlan0
[sudo] password for david: 
ioctl(SIOCSIWMODE) failed: Device or resource busy

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead.  Make
sure RFMON is enabled: run 'airmon-ng start wlan0 <#>'
Sysfs injection support was not found either.

arooni

LilArooni ~/Desktop/latest_backup_phone/last try/older rommmmm: sudo fastboot flash zip rom.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1029872 KB)...
OKAY [ 41.767s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail

arooni

LilArooni ~/downloads: sudo fastboot flash zip RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_decrypted.ROM.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 38723880 is not a multiple of the block size 4096
fastboot: ../libsparse/sparse.c:143: write_all_blocks: Assertion `pad >= 0' failed.

arooni

# This file describes the network interfaces available on your system


# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface

arooni

LilArooni ~: sudo smartctl --all /dev/sda
[sudo] password for david: 
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-24-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 7200.4
Device Model:     ST9500420AS
Serial Number:    5VJFNJAP
LU WWN Device Id: 5 000c50 0455c9182

arooni

root@ubuntu:~# cat package_list | sudo dpkg --set-selections
root@ubuntu:~# cat package_list | sudo dpkg --set-selections && sudo apt-get dselect-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages have unmet dependencies:
 upstart : Depends: initscripts
           Depends: mountall
           Depends: ifupdown (>= 0.6.10ubuntu5)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.

arooni

root@ubuntu:~# sudo apt-get dselect-upgrade -f
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages have unmet dependencies:
 upstart : Depends: initscripts
           Depends: mountall
           Depends: ifupdown (>= 0.6.10ubuntu5)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
E: Internal error, problem resolver broke stuff

arooni

LilArooni ~/.ssh: ssh -p 22 chasetoys@ip -vvv
OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to IPADDRESS [IPADDRESS] port 22.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/david/.ssh/id_rsa" as a RSA1 public key

arooni

LilArooni ~/workspace/craigslist-autoresponder: ssh -p 22222 chasetoys@IP -vvv
OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to ip] port 22222.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/david/.ssh/id_rsa" as a RSA1 public key
debug2: key_type_from_name: unknown key type '-----BEGIN'