Skip to content

Instantly share code, notes, and snippets.

@azbesthu
Created February 1, 2014 17:55
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
Star You must be signed in to star a gist
Save azbesthu/8755858 to your computer and use it in GitHub Desktop.
[ 3764.845723] sd 2:0:0:0: [sda]
[ 3764.845727] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3764.845734] sd 2:0:0:0: [sda] CDB:
[ 3764.845737] Read(10): 28 00 00 44 35 c8 00 00 08 00
[ 3764.845758] end_request: I/O error, dev sda, sector 4470216
[ 3839.500455] INFO: rcu_sched detected stalls on CPUs/tasks: { 0} (detected by 1, t=240989 jiffies, g=33145, c=33144, q=44444)
[ 3839.500476] sending NMI to all CPUs:
[ 3822.325510] NMI backtrace for cpu 0
[ 3822.325510] CPU 0
[ 3822.325510] Pid: 0, comm: swapper/0 Tainted: GF W O 3.8.0-35-generic #52~precise1-Ubuntu LENOVO 7661CH8/7661CH8
[ 3822.325510] RIP: 0010:[<ffffffff81045c45>] [<ffffffff81045c45>] __ticket_spin_lock+0x25/0x30
[ 3822.325510] RSP: 0018:ffff88007e403ae8 EFLAGS: 00000002
[ 3822.325510] RAX: 0000000000000002 RBX: 0000000000000082 RCX: 0000000000000000
[ 3822.325510] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff880078200628
[ 3822.325510] RBP: ffff88007e403ae8 R08: ffffc90014d01000 R09: 0000000000000000
[ 3822.325510] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 3822.325510] R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000
[ 3822.325510] FS: 0000000000000000(0000) GS:ffff88007e400000(0000) knlGS:0000000000000000
[ 3822.325510] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3822.325510] CR2: 0000000000c8ffb8 CR3: 0000000001c0d000 CR4: 00000000000007f0
[ 3822.325510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3822.325510] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3822.325510] Process swapper/0 (pid: 0, threadinfo ffffffff81c00000, task ffffffff81c15440)
[ 3822.325510] Stack:
[ 3822.325510] ffff88007e403af8 ffffffff81045cd9 ffff88007e403b18 ffffffff816f538e
[ 3822.325510] ffff880078200628 0000000000000000 ffff88007e403b58 ffffffff8108a492
[ 3822.325510] ffff88007e403b58 00000000000000bc 0000000000000000 ffff8800793860a4
[ 3822.325510] Call Trace:
[ 3822.325510] <IRQ>
[ 3822.325510] [<ffffffff81045cd9>] default_spin_lock_flags+0x9/0x10
[ 3822.325510] [<ffffffff816f538e>] _raw_spin_lock_irqsave+0x2e/0x40
[ 3822.325510] [<ffffffff8108a492>] __wake_up+0x32/0x70
[ 3822.325510] [<ffffffffa0214613>] dvb_dmxdev_ts_callback+0xb3/0x130 [dvb_core]
[ 3822.325510] [<ffffffffa0216c7c>] dvb_dmx_swfilter_packet+0x12c/0x5b0 [dvb_core]
[ 3822.325510] [<ffffffffa0217fca>] dvb_dmx_swfilter+0xfa/0x170 [dvb_core]
[ 3822.325510] [<ffffffffa058630c>] dvb_usb_data_complete+0x1c/0x20 [dvb_usb_v2]
[ 3822.325510] [<ffffffffa0587f5c>] usb_urb_complete+0x10c/0x130 [dvb_usb_v2]
[ 3822.325510] [<ffffffff8150fc04>] usb_hcd_giveback_urb+0x64/0xe0
[ 3822.325510] [<ffffffff81522e76>] ehci_urb_done+0x76/0xb0
[ 3822.325510] [<ffffffff815253cb>] qh_completions+0x1eb/0x3b0
[ 3822.325510] [<ffffffff81525964>] scan_async+0x64/0xf0
[ 3822.325510] [<ffffffff81526c6c>] ehci_work+0x6c/0xd0
[ 3822.325510] [<ffffffff81526f99>] ehci_irq+0x229/0x2b0
[ 3822.325510] [<ffffffff8150ef4c>] usb_hcd_irq+0x3c/0x60
[ 3822.325510] [<ffffffff810ee445>] handle_irq_event_percpu+0x55/0x210
[ 3822.325510] [<ffffffff810ee64e>] handle_irq_event+0x4e/0x80
[ 3822.325510] [<ffffffff810f1864>] handle_fasteoi_irq+0x64/0x120
[ 3822.325510] [<ffffffff81016762>] handle_irq+0x22/0x40
[ 3822.325510] [<ffffffff816ffc6a>] do_IRQ+0x5a/0xe0
[ 3822.325510] [<ffffffff816f56ed>] common_interrupt+0x6d/0x6d
[ 3822.325510] <EOI>
[ 3822.325510] [<ffffffff813f3049>] ? lapic_timer_state_broadcast+0x43/0x45
[ 3822.325510] [<ffffffff8158c530>] ? cpuidle_wrap_enter+0x50/0xa0
[ 3822.325510] [<ffffffff8158c529>] ? cpuidle_wrap_enter+0x49/0xa0
[ 3822.325510] [<ffffffff8158d96e>] ? menu_select+0x16e/0x2b0
[ 3822.325510] [<ffffffff8158c590>] cpuidle_enter_tk+0x10/0x20
[ 3822.325510] [<ffffffff8158c13f>] cpuidle_idle_call+0xaf/0x2c0
[ 3822.325510] [<ffffffff8101db6f>] cpu_idle+0xcf/0x120
[ 3822.325510] [<ffffffff816c8302>] rest_init+0x72/0x80
[ 3822.325510] [<ffffffff81d05c4f>] start_kernel+0x3d1/0x3de
[ 3822.325510] [<ffffffff81d057ff>] ? pass_bootoption.constprop.3+0xd3/0xd3
[ 3822.325510] [<ffffffff81d05397>] x86_64_start_reservations+0x131/0x135
[ 3822.325510] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120
[ 3822.325510] [<ffffffff81d05468>] x86_64_start_kernel+0xcd/0xdc
[ 3822.325510] Code: 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 f0 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 00 00 f3 90 0f b7 07 <66> 39 d0 75 f6 5d c3 0f 1f 40 00 8b 17 55 31 c0 48 89 e5 89 d1
[ 3839.501062] NMI backtrace for cpu 1
[ 3839.501067] CPU 1
[ 3839.501075] Pid: 0, comm: swapper/1 Tainted: GF W O 3.8.0-35-generic #52~precise1-Ubuntu LENOVO 7661CH8/7661CH8
[ 3839.501081] RIP: 0010:[<ffffffff8135fbe1>] [<ffffffff8135fbe1>] __const_udelay+0x1/0x30
[ 3839.501099] RSP: 0018:ffff88007e503d48 EFLAGS: 00000046
[ 3839.501104] RAX: 0000000000000000 RBX: 0000000000002710 RCX: 0000000000000004
[ 3839.501110] RDX: 000000000000a066 RSI: 0000000000000100 RDI: 0000000000418958
[ 3839.501115] RBP: ffff88007e503d68 R08: 000000000000000a R09: 0000000000000000
[ 3839.501120] R10: 00000000000008ad R11: 00000000000008ac R12: 0000000000000001
[ 3839.501125] R13: 000000000000ad9c R14: ffffffff81ce70c0 R15: 0000000000000082
[ 3839.501132] FS: 0000000000000000(0000) GS:ffff88007e500000(0000) knlGS:0000000000000000
[ 3839.501138] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3839.501143] CR2: 0000000002065000 CR3: 0000000001c0d000 CR4: 00000000000007e0
[ 3839.501148] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3839.501154] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3839.501160] Process swapper/1 (pid: 0, threadinfo ffff88007a844000, task ffff88007a849740)
[ 3839.501163] Stack:
[ 3839.501168] ffff88007e503d68 ffffffff8103ab72 0000000000008178 ffffffff81c3f440
[ 3839.501178] ffff88007e503da8 ffffffff810f5c3b ffff88007e503dc8 ffffffff81c3f440
[ 3839.501187] ffffffff81c3f440 0000000000000001 0000000000000001 0000000000000000
[ 3839.501197] Call Trace:
[ 3839.501201] <IRQ>
[ 3839.501206] [<ffffffff8103ab72>] ? arch_trigger_all_cpu_backtrace+0x72/0xa0
[ 3839.501226] [<ffffffff810f5c3b>] print_other_cpu_stall+0x21b/0x280
[ 3839.501235] [<ffffffff810f68c0>] __rcu_pending+0x1a0/0x210
[ 3839.501244] [<ffffffff810f698d>] rcu_pending+0x5d/0x80
[ 3839.501253] [<ffffffff810f8773>] rcu_check_callbacks+0xa3/0x160
[ 3839.501262] [<ffffffff8106bfd8>] update_process_times+0x48/0x90
[ 3839.501271] [<ffffffff810b6c53>] tick_sched_handle.isra.8+0x33/0x70
[ 3839.501279] [<ffffffff810b6d7c>] tick_sched_timer+0x4c/0x80
[ 3839.501287] [<ffffffff810839e8>] __run_hrtimer+0x78/0x1f0
[ 3839.501295] [<ffffffff810b6d30>] ? tick_nohz_handler+0xa0/0xa0
[ 3839.501305] [<ffffffff810b00dc>] ? ktime_get_update_offsets+0x4c/0xd0
[ 3839.501313] [<ffffffff81084277>] hrtimer_interrupt+0xf7/0x240
[ 3839.501321] [<ffffffff816ffd59>] smp_apic_timer_interrupt+0x69/0x99
[ 3839.501332] [<ffffffff816fec9d>] apic_timer_interrupt+0x6d/0x80
[ 3839.501336] <EOI>
[ 3839.501340] [<ffffffff813f3049>] ? lapic_timer_state_broadcast+0x43/0x45
[ 3839.501356] [<ffffffff8158c530>] ? cpuidle_wrap_enter+0x50/0xa0
[ 3839.501364] [<ffffffff8158c529>] ? cpuidle_wrap_enter+0x49/0xa0
[ 3839.501372] [<ffffffff8158d96e>] ? menu_select+0x16e/0x2b0
[ 3839.501381] [<ffffffff8158c590>] cpuidle_enter_tk+0x10/0x20
[ 3839.501389] [<ffffffff8158c13f>] cpuidle_idle_call+0xaf/0x2c0
[ 3839.501397] [<ffffffff8101db6f>] cpu_idle+0xcf/0x120
[ 3839.501408] [<ffffffff816d2681>] start_secondary+0xc3/0xc5
[ 3839.501413] Code: ff c8 5d c3 66 0f 1f 44 00 00 66 66 66 66 90 55 48 89 e5 ff 15 09 6b 91 00 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 <48> 8d 04 bd 00 00 00 00 65 48 8b 14 25 18 3e 01 00 48 8d 0c 12
[ 3839.516928] sd 2:0:0:0: [sda] Unhandled error code
[ 3839.516940] sd 2:0:0:0: [sda]
[ 3839.516946] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3839.516953] sd 2:0:0:0: [sda] CDB:
[ 3839.516957] Read(10): 28 00 00 01 a4 70 00 00 08 00
[ 3839.516982] end_request: I/O error, dev sda, sector 107632
[ 3863.802105] sd 2:0:0:0: [sda] Unhandled error code
[ 3863.802117] sd 2:0:0:0: [sda]
[ 3863.802123] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3863.802130] sd 2:0:0:0: [sda] CDB:
[ 3863.802135] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3863.802159] end_request: I/O error, dev sda, sector 819968
[ 3863.804785] sd 2:0:0:0: [sda] Unhandled error code
[ 3863.804789] sd 2:0:0:0: [sda]
[ 3863.804792] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3863.804794] sd 2:0:0:0: [sda] CDB:
[ 3863.804796] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3863.804807] end_request: I/O error, dev sda, sector 819968
[ 3863.805296] sd 2:0:0:0: [sda] Unhandled error code
[ 3863.805300] sd 2:0:0:0: [sda]
[ 3863.805302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3863.805305] sd 2:0:0:0: [sda] CDB:
[ 3863.805307] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3863.805317] end_request: I/O error, dev sda, sector 819968
[ 3863.805505] sd 2:0:0:0: [sda] Unhandled error code
[ 3863.805509] sd 2:0:0:0: [sda]
[ 3863.805511] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3863.805514] sd 2:0:0:0: [sda] CDB:
[ 3863.805515] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3863.805525] end_request: I/O error, dev sda, sector 819968
[ 3867.141192] sd 2:0:0:0: [sda] Unhandled error code
[ 3867.141202] sd 2:0:0:0: [sda]
[ 3867.141208] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3867.141214] sd 2:0:0:0: [sda] CDB:
[ 3867.141218] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3867.141242] end_request: I/O error, dev sda, sector 819968
[ 3867.543481] sd 2:0:0:0: [sda] Unhandled error code
[ 3867.543490] sd 2:0:0:0: [sda]
[ 3867.543496] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3867.543502] sd 2:0:0:0: [sda] CDB:
[ 3867.543506] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3867.543530] end_request: I/O error, dev sda, sector 819968
[ 3867.543779] sd 2:0:0:0: [sda] Unhandled error code
[ 3867.543787] sd 2:0:0:0: [sda]
[ 3867.543792] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3867.543798] sd 2:0:0:0: [sda] CDB:
[ 3867.543801] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3867.543822] end_request: I/O error, dev sda, sector 819968
[ 3868.389067] sd 2:0:0:0: [sda] Unhandled error code
[ 3868.389076] sd 2:0:0:0: [sda]
[ 3868.389081] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3868.389088] sd 2:0:0:0: [sda] CDB:
[ 3868.389092] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3868.389114] end_request: I/O error, dev sda, sector 819968
[ 3869.316605] sd 2:0:0:0: [sda] Unhandled error code
[ 3869.316614] sd 2:0:0:0: [sda]
[ 3869.316619] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3869.316625] sd 2:0:0:0: [sda] CDB:
[ 3869.316629] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3869.316652] end_request: I/O error, dev sda, sector 819968
[ 3869.316891] sd 2:0:0:0: [sda] Unhandled error code
[ 3869.316898] sd 2:0:0:0: [sda]
[ 3869.316903] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3869.316909] sd 2:0:0:0: [sda] CDB:
[ 3869.316913] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3869.316934] end_request: I/O error, dev sda, sector 819968
[ 3869.540995] sd 2:0:0:0: [sda] Unhandled error code
[ 3869.541003] sd 2:0:0:0: [sda]
[ 3869.541009] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3869.541015] sd 2:0:0:0: [sda] CDB:
[ 3869.541019] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3869.541042] end_request: I/O error, dev sda, sector 819968
[ 3869.541281] sd 2:0:0:0: [sda] Unhandled error code
[ 3869.541288] sd 2:0:0:0: [sda]
[ 3869.541293] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3869.541299] sd 2:0:0:0: [sda] CDB:
[ 3869.541303] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3869.541323] end_request: I/O error, dev sda, sector 819968
[ 3870.436940] sd 2:0:0:0: [sda] Unhandled error code
[ 3870.436949] sd 2:0:0:0: [sda]
[ 3870.436954] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3870.436961] sd 2:0:0:0: [sda] CDB:
[ 3870.436965] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3870.436987] end_request: I/O error, dev sda, sector 819968
[ 3870.437226] sd 2:0:0:0: [sda] Unhandled error code
[ 3870.437233] sd 2:0:0:0: [sda]
[ 3870.437238] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3870.437244] sd 2:0:0:0: [sda] CDB:
[ 3870.437248] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3870.437269] end_request: I/O error, dev sda, sector 819968
[ 3870.657874] sd 2:0:0:0: [sda] Unhandled error code
[ 3870.657878] sd 2:0:0:0: [sda]
[ 3870.657881] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3870.657884] sd 2:0:0:0: [sda] CDB:
[ 3870.657885] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3870.657896] end_request: I/O error, dev sda, sector 819968
[ 3870.658008] sd 2:0:0:0: [sda] Unhandled error code
[ 3870.658012] sd 2:0:0:0: [sda]
[ 3870.658014] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3870.658016] sd 2:0:0:0: [sda] CDB:
[ 3870.658018] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3870.658027] end_request: I/O error, dev sda, sector 819968
[ 3871.957147] sd 2:0:0:0: [sda] Unhandled error code
[ 3871.957159] sd 2:0:0:0: [sda]
[ 3871.957165] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3871.957172] sd 2:0:0:0: [sda] CDB:
[ 3871.957176] Read(10): 28 00 00 0c 83 00 00 00 08 00
[ 3871.957201] end_request: I/O error, dev sda, sector 819968
[ 3924.801073] sd 2:0:0:0: [sda] Unhandled error code
[ 3924.801080] sd 2:0:0:0: [sda]
[ 3924.801082] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3924.801086] sd 2:0:0:0: [sda] CDB:
[ 3924.801088] Read(10): 28 00 00 0c b3 00 00 01 00 00
[ 3924.801099] end_request: I/O error, dev sda, sector 832256
[ 3924.801125] sd 2:0:0:0: [sda] Unhandled error code
[ 3924.801129] sd 2:0:0:0: [sda]
[ 3924.801131] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3924.801133] sd 2:0:0:0: [sda] CDB:
[ 3924.801135] Read(10): 28 00 00 0c b3 00 00 00 08 00
[ 3924.801144] end_request: I/O error, dev sda, sector 832256
[ 3924.802181] sd 2:0:0:0: [sda] Unhandled error code
[ 3924.802185] sd 2:0:0:0: [sda]
[ 3924.802187] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3924.802190] sd 2:0:0:0: [sda] CDB:
[ 3924.802192] Read(10): 28 00 00 0c b3 00 00 00 08 00
[ 3924.802202] end_request: I/O error, dev sda, sector 832256
[ 3924.802681] sd 2:0:0:0: [sda] Unhandled error code
[ 3924.802685] sd 2:0:0:0: [sda]
[ 3924.802687] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3924.802690] sd 2:0:0:0: [sda] CDB:
[ 3924.802692] Read(10): 28 00 00 0c b3 00 00 00 08 00
[ 3924.802702] end_request: I/O error, dev sda, sector 832256
[ 3924.802865] sd 2:0:0:0: [sda] Unhandled error code
[ 3924.802868] sd 2:0:0:0: [sda]
[ 3924.802871] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3924.802873] sd 2:0:0:0: [sda] CDB:
[ 3924.802875] Read(10): 28 00 00 0c b3 00 00 00 08 00
[ 3924.802884] end_request: I/O error, dev sda, sector 832256
[ 3926.422314] sd 2:0:0:0: [sda] Unhandled error code
[ 3926.422326] sd 2:0:0:0: [sda]
[ 3926.422332] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3926.422339] sd 2:0:0:0: [sda] CDB:
[ 3926.422343] Read(10): 28 00 00 0c b3 00 00 00 08 00
[ 3926.422367] end_request: I/O error, dev sda, sector 832256
root@azbest-ThinkPad-T61:/var/log#
@azbesthu
Copy link
Author

azbesthu commented Feb 1, 2014

after reboot

[ 136.578759] usb 1-4: USB disconnect, device number 78
[ 136.852120] usb 1-4: new high-speed USB device number 79 using ehci-pci
[ 136.984496] usb 1-4: New USB device found, idVendor=04b3, idProduct=4485
[ 136.984507] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 136.984944] hub 1-4:1.0: USB hub found
[ 136.985104] hub 1-4:1.0: 4 ports detected
[ 136.986770] usb 1-4: USB disconnect, device number 79
[ 137.260114] usb 1-4: new high-speed USB device number 80 using ehci-pci
[ 137.392493] usb 1-4: New USB device found, idVendor=04b3, idProduct=4485
[ 137.392502] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 137.392942] hub 1-4:1.0: USB hub found
[ 137.393105] hub 1-4:1.0: 4 ports detected
[ 137.394757] usb 1-4: USB disconnect, device number 80

@azbesthu
Copy link
Author

azbesthu commented Feb 1, 2014

[ 2.389893] cfg80211: Calling CRDA to update world regulatory domain
[ 2.420098] thinkpad_acpi: ACPI backlight control delay disabled
[ 2.420273] thinkpad_acpi: radio switch found; radios are disabled
[ 2.420412] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.420414] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.423382] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 2.427059] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.427281] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.428961] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
[ 2.431134] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.431139] Copyright(c) 2003-2012 Intel Corporation
[ 2.431328] iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
[ 2.435915] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 2.453220] usb 5-2: New USB device found, idVendor=0ca6, idProduct=0010
[ 2.453227] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.453231] usb 5-2: Product: EZ100PU Smart Card Reader
[ 2.453234] usb 5-2: Manufacturer: CASTLES
[ 2.458373] usb 1-4: USB disconnect, device number 2
[ 2.463413] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.463419] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 2.463422] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.463425] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 2.463428] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 2.463431] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 2.463505] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.464110] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[ 2.488276] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 2.515821] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.519823] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa4
[ 2.616934] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 2.616941] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 2.617784] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x7000-0xafff]
[ 2.617790] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff]
[ 2.617794] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff:
[ 2.617798] excluding 0xf8300000-0xf86cffff
[ 2.617811] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 2.617815] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
[ 2.617829] excluding 0xf4000000-0xf7ffffff
[ 2.694225] init: failsafe main process (713) killed by TERM signal
[ 2.700138] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.822871] type=1400 audit(1391277745.631:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=826 comm="apparmor_parser"
[ 2.831365] type=1400 audit(1391277745.639:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=826 comm="apparmor_parser"
[ 2.831670] type=1400 audit(1391277745.639:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=826 comm="apparmor_parser"
[ 2.832731] usb 1-4: New USB device found, idVendor=04b3, idProduct=4485
[ 2.832736] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.833012] hub 1-4:1.0: USB hub found
[ 2.833052] hub 1-4:1.0: 4 ports detected
[ 2.839957] type=1400 audit(1391277745.647:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=825 comm="apparmor_parser"
[ 2.881303] [drm] initialized overlay support
[ 2.936114] usblp 5-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x06BC pid 0x00F5
[ 2.936178] usbcore: registered new interface driver usblp
[ 2.984911] fbcon: inteldrmfb (fb0) is primary device
[ 2.997674] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa4
[ 3.031488] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 3.031505] excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[ 3.031537] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 3.031561] clean.
[ 3.031581] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 3.031602] excluding 0x60000000-0x60ffffff
[ 3.049075] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 3.160203] usb 1-4.1: new high-speed USB device number 4 using ehci-pci
[ 3.212977] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0, board id: 71, fw id: 496542
[ 3.212982] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.230196] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 3.254290] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 3.280070] usb 1-4.1: New USB device found, idVendor=0bda, idProduct=2838
[ 3.280073] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.280075] usb 1-4.1: Product: RTL2838UHIDIR
[ 3.280077] usb 1-4.1: Manufacturer: Realtek
[ 3.280079] usb 1-4.1: SerialNumber: 00000013
[ 3.299318] WARNING: You are using an experimental version of the media stack.
[ 3.299318] As the driver is backported to an older kernel, it doesn't offer
[ 3.299318] enough quality for its usage in production.
[ 3.299318] Use it with care.
[ 3.299318] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 3.299318] 587d1b06e07b4a079453c74ba9edf17d21931049 [media] rc-core: reuse device numbers
[ 3.299318] c3aed262186841bf01feb9603885671ea567ebd9 [media] em28xx-cards: properly initialize the device bitmap
[ 3.299318] f52e9828d5f3001f11981d852dc9cbd3c8c5debe [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
[ 3.302432] WARNING: You are using an experimental version of the media stack.
[ 3.302432] As the driver is backported to an older kernel, it doesn't offer
[ 3.302432] enough quality for its usage in production.
[ 3.302432] Use it with care.
[ 3.302432] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 3.302432] 587d1b06e07b4a079453c74ba9edf17d21931049 [media] rc-core: reuse device numbers
[ 3.302432] c3aed262186841bf01feb9603885671ea567ebd9 [media] em28xx-cards: properly initialize the device bitmap
[ 3.302432] f52e9828d5f3001f11981d852dc9cbd3c8c5debe [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
[ 3.304995] usb 1-4.1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 3.332138] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 3.332285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.332708] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.335156] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.370191] usb 1-4.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 3.370220] DVB: registering new adapter (Realtek RTL2832U reference design)
[ 3.372184] usb 1-4.2: new high-speed USB device number 5 using ehci-pci
[ 3.379336] usb 1-4.1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 3.383194] r820t 7-001a: creating new instance
[ 3.394947] r820t 7-001a: Rafael Micro r820t successfully identified
[ 3.401453] Registered IR keymap rc-empty
[ 3.401716] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/rc/rc0/input6
[ 3.401826] rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/rc/rc0
[ 3.404367] IR RC5(x) protocol handler initialized
[ 3.405440] IR NEC protocol handler initialized
[ 3.408298] IR RC6 protocol handler initialized
[ 3.409568] IR JVC protocol handler initialized
[ 3.411061] IR Sony protocol handler initialized
[ 3.411525] IR SANYO protocol handler initialized
[ 3.412873] usb 1-4.1: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 3.413736] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input7
[ 3.413933] IR MCE Keyboard/mouse protocol handler initialized
[ 3.414789] lirc_dev: IR Remote Control driver registered, major 250
[ 3.416180] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 3.416181] IR LIRC bridge handler initialized
[ 3.424449] usb 1-4.1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 3.424521] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 3.472604] Console: switching to colour frame buffer device 180x56
[ 3.477133] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.477135] i915 0000:00:02.0: registered panic notifier
[ 3.485626] acpi device:01: registered as cooling_device2
[ 3.485693] ACPI: Video Device [VID](multi-head: yes rom: no post: no)
[ 3.486836] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 3.489222] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.489392] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region SB.PCI0.LPC_.PMIO 1 (20121018/utaddress-251)
[ 3.489400] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.489405] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region SB.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
[ 3.489410] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.489413] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region SB.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
[ 3.489417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.489420] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.490499] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 3.490594] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 3.494823] usb 1-4.2: New USB device found, idVendor=0bda, idProduct=2838
[ 3.494830] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.494833] usb 1-4.2: Product: RTL2838UHIDIR
[ 3.494836] usb 1-4.2: Manufacturer: Realtek
[ 3.494838] usb 1-4.2: SerialNumber: 00000001
[ 3.500233] usb 1-4.2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 3.575530] usb 1-4.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 3.575549] DVB: registering new adapter (Realtek RTL2832U reference design)
[ 3.583043] usb 1-4.2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 3.585536] r820t 8-001a: creating new instance
[ 3.597817] r820t 8-001a: Rafael Micro r820t successfully identified
[ 3.605195] Registered IR keymap rc-empty
[ 3.605317] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/rc/rc1/input9
[ 3.607679] rc1: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/rc/rc1
[ 3.610362] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input10
[ 3.610634] rc rc1: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 1
[ 3.610641] usb 1-4.2: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 3.624571] usb 1-4.2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 3.712198] usb 1-4.3: new high-speed USB device number 6 using ehci-pci
[ 3.832059] usb 1-4.3: New USB device found, idVendor=0bda, idProduct=2838
[ 3.832065] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.832068] usb 1-4.3: Product: RTL2838UHIDIR
[ 3.832071] usb 1-4.3: Manufacturer: Realtek
[ 3.832074] usb 1-4.3: SerialNumber: 00000001
[ 3.839344] usb 1-4.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 3.916893] usb 1-4.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 3.916919] DVB: registering new adapter (Realtek RTL2832U reference design)
[ 3.921871] usb 1-4.3: DVB: registering adapter 2 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 3.922048] r820t 9-001a: creating new instance
[ 3.933573] r820t 9-001a: Rafael Micro r820t successfully identified
[ 3.940192] Registered IR keymap rc-empty
[ 3.940309] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/rc/rc2/input11
[ 3.940452] rc2: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/rc/rc2
[ 3.944401] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input12
[ 3.944686] rc rc2: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 2
[ 3.944691] usb 1-4.3: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 3.956817] usb 1-4.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 3.960215] usblp0: removed
[ 3.976634] usblp 5-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x06BC pid 0x00F5
[ 4.345462] init: plymouth-stop pre-start process (1284) terminated with status 1
[ 5.469567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 5.469617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.570276] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 10.114249] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.348802] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
[ 78.456171] usb 1-4.2: dvb_usb_v2: rc.query() failed=-71
[ 78.494487] usb 1-4.2: USB disconnect, device number 5
[ 78.516289] i2c i2c-8: rtl2832: i2c rd failed=-19 reg=01 len=1
[ 78.516299] i2c i2c-8: rtl2832: i2c rd failed=-19 reg=01 len=1
[ 240.604089] INFO: task khubd:26 blocked for more than 120 seconds.
[ 240.604102] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.604108] khubd D ffff88003737afa0 0 26 2 0x00000000
[ 240.604121] ffff88007aa47668 0000000000000046 ffff880071359788 ffff88007e513ec0
[ 240.604132] ffff88007aa47fd8 ffff88007aa47fd8 ffff88007aa47fd8 0000000000013ec0
[ 240.604142] ffff880071359740 ffff88007a939740 ffff88007aa47688 7fffffffffffffff
[ 240.604151] Call Trace:
[ 240.604175] [] schedule+0x29/0x70
[ 240.604185] [] schedule_timeout+0x1e5/0x250
[ 240.604197] [] ? check_preempt_curr+0x84/0xa0
[ 240.604205] [] ? ttwu_do_wakeup+0x3d/0x120
[ 240.604214] [] wait_for_common+0xdf/0x180
[ 240.604226] [] ? device_release+0x46/0xc0
[ 240.604234] [] ? try_to_wake_up+0x200/0x200
[ 240.604243] [] wait_for_completion+0x1d/0x20
[ 240.604252] [] kthread_stop+0x64/0x120
[ 240.604285] [] dvb_frontend_stop.isra.5+0x39/0xb0 [dvb_core]
[ 240.604301] [] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
[ 240.604313] [] ? rc_free_device+0x43/0x50 [rc_core]
[ 240.604325] [] ? rc_unregister_device+0x81/0xa0 [rc_core]
[ 240.604338] [] dvb_usbv2_exit+0x80/0x140 [dvb_usb_v2]
[ 240.604350] [] dvb_usbv2_disconnect+0x74/0xc0 [dvb_usb_v2]
[ 240.604362] [] ? rpm_suspend+0x6a0/0x6a0
[ 240.604371] [] ? __pm_runtime_set_status+0x230/0x230
[ 240.604381] [] usb_unbind_interface+0x60/0x1b0
[ 240.604392] [] __device_release_driver+0x7c/0xe0
[ 240.604400] [] device_release_driver+0x2c/0x40
[ 240.604408] [] bus_remove_device+0xe1/0x120
[ 240.604418] [] device_del+0x118/0x1a0
[ 240.604429] [] usb_disable_device+0xaf/0x200
[ 240.604437] [] usb_disconnect+0xa4/0x1b0
[ 240.604446] [] ? usb_alloc_urb+0x1e/0x50
[ 240.604454] [] hub_port_connect_change+0xc9/0x7d0
[ 240.604463] [] hub_events+0x22c/0x610
[ 240.604473] [] ? default_spin_lock_flags+0x9/0x10
[ 240.604482] [] hub_thread+0x35/0x1a0
[ 240.604491] [] ? add_wait_queue+0x60/0x60
[ 240.604498] [] ? hub_events+0x610/0x610
[ 240.604507] [] kthread+0xc0/0xd0
[ 240.604516] [] ? flush_kthread_worker+0xb0/0xb0
[ 240.604527] [] ret_from_fork+0x7c/0xb0
[ 240.604535] [] ? flush_kthread_worker+0xb0/0xb0
[ 240.604595] INFO: task kdvb-ad-1-fe-0:1425 blocked for more than 120 seconds.
[ 240.604600] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.604604] kdvb-ad-1-fe-0 D ffff88003737afa0 0 1425 2 0x00000000
[ 240.604613] ffff8800712d5cf8 0000000000000046 ffff8800712d5cf8 ffff88007e513ec0
[ 240.604623] ffff8800712d5fd8 ffff8800712d5fd8 ffff8800712d5fd8 0000000000013ec0
[ 240.604632] ffff880036a99740 ffff880071359740 0000000000000282 ffff8800712d5d80
[ 240.604642] Call Trace:
[ 240.604653] [] ? dvb_usb_data_complete_204+0x20/0x20 [dvb_usb_v2]
[ 240.604662] [] schedule+0x29/0x70
[ 240.604672] [] wait_schedule+0xe/0x20 [dvb_usb_v2]
[ 240.604681] [] __wait_on_bit+0x5f/0x90
[ 240.604691] [] ? dvb_usb_data_complete_204+0x20/0x20 [dvb_usb_v2]
[ 240.604700] [] out_of_line_wait_on_bit+0x7c/0x90
[ 240.604709] [] ? autoremove_wake_function+0x40/0x40
[ 240.604720] [] dvb_usb_fe_sleep+0x114/0x120 [dvb_usb_v2]
[ 240.604732] [] ? r820t_sleep+0x83/0x270 [r820t]
[ 240.604749] [] dvb_frontend_thread+0x163/0x5a0 [dvb_core]
[ 240.604758] [] ? add_wait_queue+0x60/0x60
[ 240.604774] [] ? dvb_frontend_ioctl+0xeb0/0xeb0 [dvb_core]
[ 240.604782] [] kthread+0xc0/0xd0
[ 240.604792] [] ? flush_kthread_worker+0xb0/0xb0
[ 240.604801] [] ret_from_fork+0x7c/0xb0
[ 240.604810] [] ? flush_kthread_worker+0xb0/0xb0
azbest@azbest-ThinkPad-T61:~$

@azbesthu
Copy link
Author

azbesthu commented Feb 1, 2014

I had to remove the power cord and the battery of the notebook to get the usb subsystem working fine again

@azbesthu
Copy link
Author

azbesthu commented Feb 1, 2014

[ 3.680461] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.680462] i915 0000:00:02.0: registered panic notifier
[ 3.683331] acpi device:01: registered as cooling_device2
[ 3.683401] ACPI: Video Device [VID](multi-head: yes rom: no post: no)
[ 3.685429] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 3.686888] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.687525] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region SB.PCI0.LPC_.PMIO 1 (20121018/utaddress-251)
[ 3.687533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.687539] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region SB.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
[ 3.687544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.687546] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region SB.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
[ 3.687551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.687553] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.687748] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 3.687940] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 3.717306] init: plymouth-splash main process (1182) terminated with status 1
[ 3.740107] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 3.872456] usb 1-4: New USB device found, idVendor=04b3, idProduct=4485
[ 3.872462] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.872783] hub 1-4:1.0: USB hub found
[ 3.872820] hub 1-4:1.0: 4 ports detected
[ 3.875698] usblp0: removed
[ 3.889573] usblp 5-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x06BC pid 0x00F5
[ 4.144222] usb 1-4.1: new high-speed USB device number 6 using ehci-pci
[ 4.265468] usb 1-4.1: New USB device found, idVendor=0bda, idProduct=2838
[ 4.265474] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.265478] usb 1-4.1: Product: RTL2838UHIDIR
[ 4.265481] usb 1-4.1: Manufacturer: Realtek
[ 4.265484] usb 1-4.1: SerialNumber: 00000013
[ 4.284799] WARNING: You are using an experimental version of the media stack.
[ 4.284799] As the driver is backported to an older kernel, it doesn't offer
[ 4.284799] enough quality for its usage in production.
[ 4.284799] Use it with care.
[ 4.284799] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 4.284799] 587d1b06e07b4a079453c74ba9edf17d21931049 [media] rc-core: reuse device numbers
[ 4.284799] c3aed262186841bf01feb9603885671ea567ebd9 [media] em28xx-cards: properly initialize the device bitmap
[ 4.284799] f52e9828d5f3001f11981d852dc9cbd3c8c5debe [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
[ 4.287621] WARNING: You are using an experimental version of the media stack.
[ 4.287621] As the driver is backported to an older kernel, it doesn't offer
[ 4.287621] enough quality for its usage in production.
[ 4.287621] Use it with care.
[ 4.287621] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 4.287621] 587d1b06e07b4a079453c74ba9edf17d21931049 [media] rc-core: reuse device numbers
[ 4.287621] c3aed262186841bf01feb9603885671ea567ebd9 [media] em28xx-cards: properly initialize the device bitmap
[ 4.287621] f52e9828d5f3001f11981d852dc9cbd3c8c5debe [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
[ 4.290615] usb 1-4.1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 4.344221] usb 1-4.2: new high-speed USB device number 7 using ehci-pci
[ 4.356623] usb 1-4.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 4.356648] DVB: registering new adapter (Realtek RTL2832U reference design)
[ 4.372104] usb 1-4.1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 4.378122] r820t 7-001a: creating new instance
[ 4.389603] r820t 7-001a: Rafael Micro r820t successfully identified
[ 4.396348] Registered IR keymap rc-empty
[ 4.396472] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/rc/rc0/input7
[ 4.396555] rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/rc/rc0
[ 4.404068] IR RC5(x) protocol handler initialized
[ 4.405480] usb 1-4.1: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 4.405852] IR NEC protocol handler initialized
[ 4.406965] IR RC6 protocol handler initialized
[ 4.409248] IR Sony protocol handler initialized
[ 4.411784] IR SANYO protocol handler initialized
[ 4.413096] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input8
[ 4.413543] lirc_dev: IR Remote Control driver registered, major 250
[ 4.417073] IR MCE Keyboard/mouse protocol handler initialized
[ 4.417660] IR JVC protocol handler initialized
[ 4.418306] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 4.418312] IR LIRC bridge handler initialized
[ 4.419126] usb 1-4.1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 4.419186] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 4.463962] usb 1-4.2: New USB device found, idVendor=0bda, idProduct=2838
[ 4.463968] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.463971] usb 1-4.2: Product: RTL2838UHIDIR
[ 4.463974] usb 1-4.2: Manufacturer: Realtek
[ 4.463977] usb 1-4.2: SerialNumber: 00000001
[ 4.469395] usb 1-4.2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 4.536435] usb 1-4.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 4.536462] DVB: registering new adapter (Realtek RTL2832U reference design)
[ 4.539464] usb 1-4.2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 4.539558] r820t 8-001a: creating new instance
[ 4.551076] r820t 8-001a: Rafael Micro r820t successfully identified
[ 4.557722] Registered IR keymap rc-empty
[ 4.557843] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/rc/rc1/input9
[ 4.557927] rc1: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/rc/rc1
[ 4.560201] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input10
[ 4.561591] rc rc1: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 1
[ 4.561600] usb 1-4.2: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 4.573086] usb 1-4.2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 4.660229] usb 1-4.3: new high-speed USB device number 8 using ehci-pci
[ 4.780079] usb 1-4.3: New USB device found, idVendor=0bda, idProduct=2838
[ 4.780085] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.780088] usb 1-4.3: Product: RTL2838UHIDIR
[ 4.780091] usb 1-4.3: Manufacturer: Realtek
[ 4.780094] usb 1-4.3: SerialNumber: 00000001
[ 4.785509] usb 1-4.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 4.852675] usb 1-4.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 4.852697] DVB: registering new adapter (Realtek RTL2832U reference design)
[ 4.855711] usb 1-4.3: DVB: registering adapter 2 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 4.855827] r820t 9-001a: creating new instance
[ 4.867454] r820t 9-001a: Rafael Micro r820t successfully identified
[ 4.873960] Registered IR keymap rc-empty
[ 4.874076] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/rc/rc2/input11
[ 4.874147] rc2: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/rc/rc2
[ 4.878726] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input12
[ 4.878884] rc rc2: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 2
[ 4.878890] usb 1-4.3: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 4.890457] usb 1-4.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 5.609593] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 5.609635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.539501] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 10.081569] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.303598] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
[ 1056.492023] i2c i2c-8: rtl2832: i2c rd failed=-71 reg=51 len=1
[ 1056.496296] i2c i2c-8: rtl2832: i2c rd failed=-71 reg=01 len=1
[ 1056.500497] r820t 8-001a: r820t_write: i2c wr failed=-71 reg=0c len=1: f0
[ 1056.501614] usb 1-4.2: USB disconnect, device number 7
[ 1056.504746] i2c i2c-8: rtl2832: i2c rd failed=-71 reg=b1 len=1
[ 1056.524385] i2c i2c-8: rtl2832: i2c rd failed=-19 reg=01 len=1
[ 1056.524399] i2c i2c-8: rtl2832: i2c rd failed=-19 reg=01 len=1
[ 1200.612058] INFO: task khubd:26 blocked for more than 120 seconds.
[ 1200.612068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1200.612074] khubd D ffff8800371e29e0 0 26 2 0x00000000
[ 1200.612085] ffff88007aa47668 0000000000000046 ffff880078544608 ffff88007e413ec0
[ 1200.612096] ffff88007aa47fd8 ffff88007aa47fd8 ffff88007aa47fd8 0000000000013ec0
[ 1200.612105] ffff8800785445c0 ffff88007a939740 ffff88007aa47688 7fffffffffffffff
[ 1200.612160] Call Trace:
[ 1200.612180] [] schedule+0x29/0x70
[ 1200.612190] [] schedule_timeout+0x1e5/0x250
[ 1200.612201] [] ? check_preempt_curr+0x84/0xa0
[ 1200.612209] [] ? ttwu_do_wakeup+0x3d/0x120
[ 1200.612218] [] wait_for_common+0xdf/0x180
[ 1200.612229] [] ? device_release+0x46/0xc0
[ 1200.612237] [] ? try_to_wake_up+0x200/0x200
[ 1200.612245] [] wait_for_completion+0x1d/0x20
[ 1200.612255] [] kthread_stop+0x64/0x120
[ 1200.612281] [] dvb_frontend_stop.isra.5+0x39/0xb0 [dvb_core]
[ 1200.612298] [] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
[ 1200.612311] [] ? rc_free_device+0x43/0x50 [rc_core]
[ 1200.612322] [] ? rc_unregister_device+0x81/0xa0 [rc_core]
[ 1200.612333] [] dvb_usbv2_exit+0x80/0x140 [dvb_usb_v2]
[ 1200.612345] [] dvb_usbv2_disconnect+0x74/0xc0 [dvb_usb_v2]
[ 1200.612357] [] ? rpm_suspend+0x6a0/0x6a0
[ 1200.612366] [] ? __pm_runtime_set_status+0x230/0x230
[ 1200.612377] [] ? dvb_usbv2_exit+0x140/0x140 [dvb_usb_v2]
[ 1200.612387] [] usb_unbind_interface+0x60/0x1b0
[ 1200.612397] [] __device_release_driver+0x7c/0xe0
[ 1200.612405] [] device_release_driver+0x2c/0x40
[ 1200.612413] [] bus_remove_device+0xe1/0x120
[ 1200.612422] [] device_del+0x118/0x1a0
[ 1200.612432] [] usb_disable_device+0xaf/0x200
[ 1200.612441] [] usb_disconnect+0xa4/0x1b0
[ 1200.612450] [] ? usb_alloc_urb+0x1e/0x50
[ 1200.612458] [] hub_port_connect_change+0xc9/0x7d0
[ 1200.612467] [] hub_events+0x22c/0x610
[ 1200.612478] [] ? default_spin_lock_flags+0x9/0x10
[ 1200.612486] [] hub_thread+0x35/0x1a0
[ 1200.612494] [] ? add_wait_queue+0x60/0x60
[ 1200.612502] [] ? hub_events+0x610/0x610
[ 1200.612511] [] kthread+0xc0/0xd0
[ 1200.612519] [] ? flush_kthread_worker+0xb0/0xb0
[ 1200.612529] [] ret_from_fork+0x7c/0xb0
[ 1200.612538] [] ? flush_kthread_worker+0xb0/0xb0
[ 1200.612599] INFO: task kdvb-ad-1-fe-0:2339 blocked for more than 120 seconds.
[ 1200.612604] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1200.612608] kdvb-ad-1-fe-0 D ffffffff8108b7e9 0 2339 2 0x00000000
[ 1200.612617] ffff88007a79fcf8 0000000000000046 ffff88007a79fcf8 ffff88007e413ec0
[ 1200.612627] ffff88007a79ffd8 ffff88007a79ffd8 ffff88007a79ffd8 0000000000013ec0
[ 1200.612636] ffff880036c18000 ffff8800785445c0 0000000000000282 ffff88007a79fd80
[ 1200.612645] Call Trace:
[ 1200.612657] [] ? dvb_usb_data_complete_204+0x20/0x20 [dvb_usb_v2]
[ 1200.612666] [] schedule+0x29/0x70
[ 1200.612676] [] wait_schedule+0xe/0x20 [dvb_usb_v2]
[ 1200.612684] [] __wait_on_bit+0x5f/0x90
[ 1200.612695] [] ? dvb_usb_data_complete_204+0x20/0x20 [dvb_usb_v2]
[ 1200.612703] [] out_of_line_wait_on_bit+0x7c/0x90
[ 1200.612713] [] ? autoremove_wake_function+0x40/0x40
[ 1200.612723] [] dvb_usb_fe_sleep+0x114/0x120 [dvb_usb_v2]
[ 1200.612735] [] ? r820t_sleep+0x83/0x270 [r820t]
[ 1200.612751] [] dvb_frontend_thread+0x163/0x5a0 [dvb_core]
[ 1200.612761] [] ? add_wait_queue+0x60/0x60
[ 1200.612776] [] ? dvb_frontend_ioctl+0xeb0/0xeb0 [dvb_core]
[ 1200.612784] [] kthread+0xc0/0xd0
[ 1200.612794] [] ? flush_kthread_worker+0xb0/0xb0
[ 1200.612803] [] ret_from_fork+0x7c/0xb0
[ 1200.612811] [] ? flush_kthread_worker+0xb0/0xb0
[ 1320.612083] INFO: task khubd:26 blocked for more than 120 seconds.
[ 1320.612094] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1320.612100] khubd D ffff8800371e29e0 0 26 2 0x00000000
[ 1320.612112] ffff88007aa47668 0000000000000046 ffff880078544608 ffff88007e413ec0
[ 1320.612123] ffff88007aa47fd8 ffff88007aa47fd8 ffff88007aa47fd8 0000000000013ec0
[ 1320.612132] ffff8800785445c0 ffff88007a939740 ffff88007aa47688 7fffffffffffffff
[ 1320.612141] Call Trace:
[ 1320.612163] [] schedule+0x29/0x70
[ 1320.612174] [] schedule_timeout+0x1e5/0x250
[ 1320.612187] [] ? check_preempt_curr+0x84/0xa0
[ 1320.612195] [] ? ttwu_do_wakeup+0x3d/0x120
[ 1320.612204] [] wait_for_common+0xdf/0x180
[ 1320.612215] [] ? device_release+0x46/0xc0
[ 1320.612224] [] ? try_to_wake_up+0x200/0x200
[ 1320.612232] [] wait_for_completion+0x1d/0x20
[ 1320.612242] [] kthread_stop+0x64/0x120
[ 1320.612271] [] dvb_frontend_stop.isra.5+0x39/0xb0 [dvb_core]
[ 1320.612287] [] dvb_unregister_frontend+0x3b/0x100 [dvb_core]
[ 1320.612301] [] ? rc_free_device+0x43/0x50 [rc_core]
[ 1320.612313] [] ? rc_unregister_device+0x81/0xa0 [rc_core]
[ 1320.612325] [] dvb_usbv2_exit+0x80/0x140 [dvb_usb_v2]
[ 1320.612337] [] dvb_usbv2_disconnect+0x74/0xc0 [dvb_usb_v2]
[ 1320.612349] [] ? rpm_suspend+0x6a0/0x6a0
[ 1320.612359] [] ? __pm_runtime_set_status+0x230/0x230
[ 1320.612370] [] ? dvb_usbv2_exit+0x140/0x140 [dvb_usb_v2]
[ 1320.612380] [] usb_unbind_interface+0x60/0x1b0
[ 1320.612390] [] __device_release_driver+0x7c/0xe0
[ 1320.612399] [] device_release_driver+0x2c/0x40
[ 1320.612407] [] bus_remove_device+0xe1/0x120
[ 1320.612416] [] device_del+0x118/0x1a0
[ 1320.612427] [] usb_disable_device+0xaf/0x200
[ 1320.612436] [] usb_disconnect+0xa4/0x1b0
[ 1320.612445] [] ? usb_alloc_urb+0x1e/0x50
[ 1320.612453] [] hub_port_connect_change+0xc9/0x7d0
[ 1320.612462] [] hub_events+0x22c/0x610
[ 1320.612472] [] ? default_spin_lock_flags+0x9/0x10
[ 1320.612481] [] hub_thread+0x35/0x1a0
[ 1320.612490] [] ? add_wait_queue+0x60/0x60
[ 1320.612498] [] ? hub_events+0x610/0x610
[ 1320.612506] [] kthread+0xc0/0xd0
[ 1320.612515] [] ? flush_kthread_worker+0xb0/0xb0
[ 1320.612526] [] ret_from_fork+0x7c/0xb0
[ 1320.612535] [] ? flush_kthread_worker+0xb0/0xb0
[ 1320.612603] INFO: task kdvb-ad-1-fe-0:2339 blocked for more than 120 seconds.
[ 1320.612608] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1320.612612] kdvb-ad-1-fe-0 D ffffffff8108b7e9 0 2339 2 0x00000000
[ 1320.612622] ffff88007a79fcf8 0000000000000046 ffff88007a79fcf8 ffff88007e413ec0
[ 1320.612631] ffff88007a79ffd8 ffff88007a79ffd8 ffff88007a79ffd8 0000000000013ec0
[ 1320.612640] ffff880036c18000 ffff8800785445c0 0000000000000282 ffff88007a79fd80
[ 1320.612650] Call Trace:
[ 1320.612661] [] ? dvb_usb_data_complete_204+0x20/0x20 [dvb_usb_v2]
[ 1320.612670] [] schedule+0x29/0x70
[ 1320.612680] [] wait_schedule+0xe/0x20 [dvb_usb_v2]
[ 1320.612688] [] __wait_on_bit+0x5f/0x90
[ 1320.612699] [] ? dvb_usb_data_complete_204+0x20/0x20 [dvb_usb_v2]
[ 1320.612707] [] out_of_line_wait_on_bit+0x7c/0x90
[ 1320.612716] [] ? autoremove_wake_function+0x40/0x40
[ 1320.612727] [] dvb_usb_fe_sleep+0x114/0x120 [dvb_usb_v2]
[ 1320.612739] [] ? r820t_sleep+0x83/0x270 [r820t]
[ 1320.612755] [] dvb_frontend_thread+0x163/0x5a0 [dvb_core]
[ 1320.612764] [] ? add_wait_queue+0x60/0x60
[ 1320.612780] [] ? dvb_frontend_ioctl+0xeb0/0xeb0 [dvb_core]
[ 1320.612788] [] kthread+0xc0/0xd0
[ 1320.612798] [] ? flush_kthread_worker+0xb0/0xb0
[ 1320.612807] [] ret_from_fork+0x7c/0xb0
[ 1320.612815] [] ? flush_kthread_worker+0xb0/0xb0
azbest@azbest-ThinkPad-T61:~$

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment