Skip to content

Instantly share code, notes, and snippets.

@bakueikozo

bakueikozo/BookLive BL-121

Last active June 5, 2020 14:52
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save bakueikozo/1788f0ac15bc666b79765b5b9f0f7e34 to your computer and use it in GitHub Desktop.
Save bakueikozo/1788f0ac15bc666b79765b5b9f0f7e34 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
BookLive BL-121
U-Boot NTM-1.0.0 (12月 07 2012 - 11:28:32)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 160000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
Board: MX50 RD3 board
Boot Reason: [POR]
Boot Device: SPI NOR
I2C: ready
DRAM: 512 MB
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1, FSL_ESDHC: 2
Using default environment
In: serial
Out: serial
Err: serial
PMIC Mode: SPI
MMC read: dev # 2, block # 3840,count 8 ...
8 blocks read: OK
Turn on event: PWRON
End Factor: 0
MMC read: dev # 2, block # 3808,count 8 ...
8 blocks read: OK
Battery voltage[0]: 3645 mV (bootable: 3700 mV)
Battery voltage[1]: 3626 mV (bootable: 3700 mV)
Battery voltage[2]: 3608 mV (bootable: 3700 mV)
Battery voltage[3]: 3603 mV (bootable: 3700 mV)
Battery voltage[4]: 3622 mV (bootable: 3700 mV)
Battery voltage[5]: 3608 mV (bootable: 3700 mV)
Battery voltage[6]: 3626 mV (bootable: 3700 mV)
Battery voltage[7]: 3626 mV (bootable: 3700 mV)
Battery voltage[8]: 3608 mV (bootable: 3700 mV)
Battery voltage[9]: 3626 mV (bootable: 3700 mV)
Battery voltage[10]: 3608 mV (bootable: 3700 mV)
Battery voltage[11]: 3626 mV (bootable: 3700 mV)
Battery voltage[12]: 3645 mV (bootable: 3700 mV)
Battery voltage[13]: 3603 mV (bootable: 3700 mV)
Battery voltage[14]: 3608 mV (bootable: 3700 mV)
Battery voltage[15]: 3603 mV (bootable: 3700 mV)
Battery voltage[16]: 3626 mV (bootable: 3700 mV)
Battery voltage[17]: 3589 mV (bootable: 3700 mV)
Battery voltage[18]: 3631 mV (bootable: 3700 mV)
Battery voltage[19]: 3589 mV (bootable: 3700 mV)
Battery voltage[20]: 3603 mV (bootable: 3700 mV)
Battery voltage[21]: 3622 mV (bootable: 3700 mV)
Battery voltage[22]: 3603 mV (bootable: 3700 mV)
Battery voltage[23]: 3608 mV (bootable: 3700 mV)
Battery voltage[24]: 3626 mV (bootable: 3700 mV)
Battery voltage[25]: 3626 mV (bootable: 3700 mV)
Battery voltage[26]: 3603 mV (bootable: 3700 mV)
Battery voltage[27]: 3603 mV (bootable: 3700 mV)
Battery voltage[28]: 3603 mV (bootable: 3700 mV)
Battery voltage[29]: 3622 mV (bootable: 3700 mV)
Net: No ethernet found.
MMC read: dev # 2, block # 16384,count 1 ...
1 blocks read: OK
MMC read: dev # 2, block # 16392,count 5772 ...
5772 blocks read: OK
MMC read: dev # 2, block # 22168,count 465 ...
465 blocks read: OK
kernel @ 70808000 (2955100)
ramdisk @ 71800000 (237767)
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.35.3-ge281108 (si-user@android-212) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Mon Aug 5 09:31:53 JST 2013
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Freescale MX50 Reference Design Platform
mmc_nvm: set physical memory address 0x[8d700000]
Ignoring unrecognised tag 0x54410008
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 119126
Kernel command line: console=ttymxc0,115200 keypad panic=5 androidboot.mode=charger androidboot.bootloader=NTM-1.0.0 charger_mode=1
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2401280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 469MB = 469MB total
Memory: 463980k/463980k available, 16276k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xf9e00000 - 0xffe00000 ( 96 MB)
vmalloc : 0x9d800000 - 0xf4000000 (1384 MB)
lowmem : 0x80000000 - 0x9d500000 ( 469 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.init : 0x80008000 - 0x80035000 ( 180 kB)
.text : 0x80035000 - 0x807d5000 (7808 kB)
.data : 0x807fc000 - 0x8085c5e0 ( 386 kB)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:368
MXC GPIO hardware
MXC IRQ initialized
MXC_Early serial console at MMIO 0x53fbc000 (options '115200')
bootconsole [ttymxc0] enabled
Console: colour dummy device 80x30
Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
i.MX IRAM pool: 128 KB@0x9d840000
CPU is i.MX50 Revision 1.1
sgtl5000: AUDIO_CLK_EN Shutdown
sgtl5000: AUDIO_PWR_EN Shutdown
Using SDMA I.API
MXC DMA API initialized
IMX usb wakeup probe
IMX usb wakeup probe
bio: create slab <bio-0> at 0
regulator: DCDC_3V15: 3150 mV
SCSI subsystem initialized
CSPI: mxc_spi-0 probed
CSPI: mxc_spi-2 probed
Advanced Linux Sound Architecture Driver Version 1.0.23.
mc34708 Rev 2.4 FinVer 0 detected
PMIC MC34708 ID:0x14
Initializing mc34708 regulators for mx50 rdp.
regulator: SW1: 650 <--> 1437 mV at 1100 mV
regulator: SW1B: 650 <--> 1437 mV at 1100 mV
regulator: SW2: 650 <--> 1437 mV at 1200 mV
regulator: SW3: 650 <--> 1425 mV at 1200 mV
regulator: SW4A: 1200 <--> 3300 mV at 3150 mV
regulator: SW4B: 1200 <--> 3300 mV at 1200 mV
regulator: SW5: 1200 <--> 1975 mV at 1800 mV
regulator: SWBST:
regulator: VPLL: 1200 <--> 1800 mV at 1800 mV
regulator: VREFDDR:
regulator: VDAC: 2500 <--> 2775 mV at 2500 mV
regulator: VUSB:
regulator: VUSB2: 2500 <--> 3000 mV at 2500 mV
regulator: VGEN1: 1200 <--> 1550 mV at 1200 mV
regulator: VGEN2: 2500 <--> 3300 mV at 2500 mV
Device spi3.0 probed
mx50_rdp_pm: Power Management for MX50 RDP
mx50_rdp_pm: END_FACTOR: 5 (under_bootable_voltage)
pre_charger_mode: start
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 232K
LPMode driver module loaded
Static Power Management for Freescale i.MX5
PM driver module loaded
sdram autogating driver module loaded
Bus freq driver module loaded
mxc_dvfs_core_probe
DVFS driver module loaded
i.MXC CPU frequency driver
DVFS PER driver module loaded
ashmem: initialized
msgmni has been set to 906
alg: No test for stdrng (krng)
cryptodev: driver loaded.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
regulator: DISPLAY:
regulator: VCOM: at 1250 mV
regulator: V3P3_CTRL:
regulator: PMIC_TEMP: at 0 mV
regulator: PWR0_CTRL:
tps65180 0-0068: PMIC TPS6518x for eInk display
pwm_led_probe is called
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a Freescale i.MX
console [ttymxc0] enabled, bootconsole disabled
console [ttymxc0] enabled, bootconsole disabled
mxcintuart.1: ttymxc1 at MMIO 0x53fc0000 (irq = 32) is a Freescale i.MX
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a Freescale i.MX
loop: module loaded
pmem_adsp: 0 init
pmem_gpu: 0 init
Android kernel panic handler initialized (bind=kpanic)
m25p80 spi3.1: found n25q032, expected m25p32
m25p80 spi3.1: n25q032 (4096 Kbytes)
Creating 4 MTD partitions on "m25p80":
0x000000000000-0x000000180000 : "BOOTLOADER"
0x000000180000-0x000000300000 : "WAVEFORM"
0x000000300000-0x0000003e0000 : "BOOTLOGO"
0x0000003e0000-0x000000400000 : "ZWV"
vcan: Virtual CAN interface driver
Freescale FlexCAN Driver
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ARC USBOTG Device Controller driver (1 August 2005)
mmc_nvm: physical memory mapping
Android usb driver initialize
android_usb gadget: android_usb ready
fsl-usb2-udc: bind to driver android_usb
android gadget: register function usb_mass_storage
MXC keypad loaded
input: mxckpd as /devices/virtual/input/input0
input: mxc_power_key as /devices/virtual/input/input1
PMIC powerkey probe
input: MSP430 Infrared TouchScreen as /devices/virtual/input/input2
mxc_rtc mxc_rtc.0: wait for RTC_RTCCTL is enable.
mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
pmic rtc probe start
using rtc device, mc34708_rtc, for alarms
pmic_rtc mc34708_rtc.1: rtc core: registered mc34708_rtc as rtc1
pmic rtc probe succeed
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
Linux video capture interface: v2.00
APM Battery Driver
add stts75 i2c driver
MXC WatchDog Driver 2.0
MXC Watchdog # 0 Timer: initial timeout 60 sec
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
PMIC ADC start probe
set the registers according to the MC34708ER
set the registers according to the MC34708ER
battery 978: heatsave_data, 46, 44, 48, 51, 20, 40, 25
battery 1023: interval, 5, 500, 60, 5, 5
battery 1036: values, 2, 0, 100000, 450000, 4100000
battery 1050: config, 3000000, 3850000, 4200000, 4350000, 3400000, 50000
battery 1071: temp, 5, 0, 60, 450
battery 1082: charging, 4080000, 4020000, 4030000, 3970000
battery 2351: MC34708_EVENT_USBDET event
power_supply ripley_usb_charger: usb cable status: online
heatsave 369: Starting heat save thread
gpu mmu enabled
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 0 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc1: SDHCI detect irq 0 irq 2 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc2: SDHCI detect irq 0 irq 3 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc3: SDHCI detect irq 0 irq 4 INTERNAL DMA
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
MC34708 wait ADC completion timeout!
battery status: 1, old status: 1, point: 0
sgtl5000-i2c 1-000a: SGTL5000 revision 17
sgtl5000: mode 0x00
sgtl5000_power_down: CHIP_ANA_POWER read : 0x7060
sgtl5000_power_down: CHIP_ANA_POWER write : 0x2000
sgtl5000_power_down: CHIP_DIG_POWER read : 0x0000
No device for DAI imx-ssi-1-0
No device for DAI imx-ssi-1-1
No device for DAI imx-ssi-2-0
No device for DAI imx-ssi-2-1
No device for DAI imx-spdif-dai
ALSA device list:
mmc2: Command-Timeout cmd(op=52, arg=0x00000c00)
No soundcards found.
nf_conntrack version 0.5.0 (7253 buckets, 29012 max)
mmc2: Command-Timeout cmd(op=52, arg=0x80000c08)
MC34708 wait ADC completion timeout!
init_coulomb is 0 mAh
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
mmc2: Command-Timeout cmd(op=8, arg=0x000001aa)
NET: Registered protocol family 10
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
IPv6 over IPv4 tunneling driver
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
NET: Registered protocol family 17
NET: Registered protocol family 15
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
reading waveform data
finished reading compressed waveform (53606 -> 1310720)
mmc2: new high speed MMC card at address 0001
mmcblk0: mmc2:0001 SJS00M 3.64 GiB
mmcblk0:
Alternate GPT is invalid, using primary GPT.
p1 (misc) p2 (nvm) p3 (recovery) p4 (boot) p5 (system) p6 (cache) p7 (userdata) p8 (media) p9 (gptbk)
part_name:misc start_sect:3808
part_name:nvm start_sect:3840
mmc_nvm: read success
power_supply ripley_usb_charger: usb cable status: online
battery status: 1, old status: 1, point: 0
regulator_init_complete: disabling PMIC_TEMP
pmic_rtc mc34708_rtc.1: setting system clock to 2012-04-13 18:00:00 UTC (1334340000)
apanic: Bound to mtd partition 'kpanic'
apanic: No panic data available
Android panic create MTDRAM device (addr:0x8d500000, size:2048 KB)
Freeing init memory: 180K
init: cannot open '/initlogo.rle'
init: Unable to open persistent property directory /data/property errno: 2
mxc_wdt mxc_wdt.0: start watchdog petting service
charger:
charger: *************** LAST KMSG ***************
charger:
charger: last_kmsg not found. Cold reset?
charger:
charger: ************* END LAST KMSG *************
charger:
charger: --------------- STARTING CHARGER MODE ---------------
charger: power supply ripley_aux_charger (Mains) offline (action=add num_online=0 num_supplies=1)
charger: power supply ripley_usb_charger (USB) online (action=add num_online=1 num_supplies=2)
charger: status: Charging
pwm-led pwm-led.0: pwm_led_delay_on_store: state is 10
pwm-led pwm-led.0: pwm_led_delay_off_store: state is 0
charger: power supply ripley_bat (Battery) (action=add num_online=1 num_supplies=3)
pre_charger_mode: stopping...
charger: status: Charging
pwm-led pwm-led.0: pwm_led_delay_on_store: state is 10
pwm-led pwm-led.0: pwm_led_delay_off_store: state is 0
charger: power supply ripley_bat (Battery) (action=change num_online=1 num_supplies=3)
pre_charger_mode: end
charger: power supply ripley_bat (Battery) (action=change num_online=1 num_supplies=3)
charger: power supply ripley_bat (Battery) (action=change num_online=1 num_supplies=3)
charger: power supply ripley_bat (Battery) (action=change num_online=1 num_supplies=3)
charger: power supply ripley_bat (Battery) (action=change num_online=1 num_supplies=3)
Raw
charged up battery and start up
U-Boot NTM-1.0.0 (12月 07 2012 - 11:28:32)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 160000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
Board: MX50 RD3 board
Boot Reason: [POR]
Boot Device: SPI NOR
I2C: ready
DRAM: 512 MB
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1, FSL_ESDHC: 2
Using default environment
In: serial
Out: serial
Err: serial
PMIC Mode: SPI
MMC read: dev # 2, block # 3840,count 8 ...
8 blocks read: OK
Turn on event: PWRON
End Factor: 7
MMC read: dev # 2, block # 3808,count 8 ...
8 blocks read: OK
Battery voltage[0]: 3683 mV (bootable: 3700 mV)
Battery voltage[1]: 3673 mV (bootable: 3700 mV)
Battery voltage[2]: 3683 mV (bootable: 3700 mV)
Battery voltage[3]: 3659 mV (bootable: 3700 mV)
Battery voltage[4]: 3669 mV (bootable: 3700 mV)
Battery voltage[5]: 3659 mV (bootable: 3700 mV)
Battery voltage[6]: 3683 mV (bootable: 3700 mV)
Battery voltage[7]: 3678 mV (bootable: 3700 mV)
Battery voltage[8]: 3683 mV (bootable: 3700 mV)
Battery voltage[9]: 3683 mV (bootable: 3700 mV)
Battery voltage[10]: 3659 mV (bootable: 3700 mV)
Battery voltage[11]: 3659 mV (bootable: 3700 mV)
Battery voltage[12]: 3659 mV (bootable: 3700 mV)
Battery voltage[13]: 3683 mV (bootable: 3700 mV)
Battery voltage[14]: 3655 mV (bootable: 3700 mV)
Battery voltage[15]: 3659 mV (bootable: 3700 mV)
Battery voltage[16]: 3659 mV (bootable: 3700 mV)
Battery voltage[17]: 3702 mV (bootable: 3700 mV)
vcom value equal 1630
JEDEC ID: 0x20:0xba:0x16
4096 KiB N25Q032 - 4MB at 0:1 is now current device
waveform uncompressed: 53606 -> 1310720
read waveform (compressed)
JEDEC ID: 0x20:0xba:0x16
4096 KiB N25Q032 - 4MB at 0:1 is now current device
panel_info.vl_row =600, panel_info.vl_col =800, bpix =8
width = 800, height=600,bmp_bpix =8, colors=256
, compression=0
Mode0 init complete
Splash screen updating...
Net: No ethernet found.
MMC read: dev # 2, block # 16384,count 1 ...
1 blocks read: OK
MMC read: dev # 2, block # 16392,count 5772 ...
5772 blocks read: OK
MMC read: dev # 2, block # 22168,count 465 ...
465 blocks read: OK
kernel @ 70808000 (2955100)
ramdisk @ 71800000 (237767)
Splash screen update complete
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.35.3-ge281108 (si-user@android-212) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Mon Aug 5 09:31:53 JST 2013
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Freescale MX50 Reference Design Platform
mmc_nvm: set physical memory address 0x[8d700000]
Ignoring unrecognised tag 0x54410008
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 119126
Kernel command line: console=ttymxc0,115200 keypad panic=5 androidboot.mode=normal androidboot.bootloader=NTM-1.0.0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2401280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 469MB = 469MB total
Memory: 463980k/463980k available, 16276k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xf9e00000 - 0xffe00000 ( 96 MB)
vmalloc : 0x9d800000 - 0xf4000000 (1384 MB)
lowmem : 0x80000000 - 0x9d500000 ( 469 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.init : 0x80008000 - 0x80035000 ( 180 kB)
.text : 0x80035000 - 0x807d5000 (7808 kB)
.data : 0x807fc000 - 0x8085c5e0 ( 386 kB)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:368
MXC GPIO hardware
MXC IRQ initialized
MXC_Early serial console at MMIO 0x53fbc000 (options '115200')
bootconsole [ttymxc0] enabled
Console: colour dummy device 80x30
Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
i.MX IRAM pool: 128 KB@0x9d840000
CPU is i.MX50 Revision 1.1
sgtl5000: AUDIO_CLK_EN Shutdown
sgtl5000: AUDIO_PWR_EN Shutdown
Using SDMA I.API
MXC DMA API initialized
IMX usb wakeup probe
IMX usb wakeup probe
bio: create slab <bio-0> at 0
regulator: DCDC_3V15: 3150 mV
SCSI subsystem initialized
CSPI: mxc_spi-0 probed
CSPI: mxc_spi-2 probed
Advanced Linux Sound Architecture Driver Version 1.0.23.
mc34708 Rev 2.4 FinVer 0 detected
PMIC MC34708 ID:0x14
Initializing mc34708 regulators for mx50 rdp.
regulator: SW1: 650 <--> 1437 mV at 1100 mV
regulator: SW1B: 650 <--> 1437 mV at 1100 mV
regulator: SW2: 650 <--> 1437 mV at 1200 mV
regulator: SW3: 650 <--> 1425 mV at 1200 mV
regulator: SW4A: 1200 <--> 3300 mV at 3150 mV
regulator: SW4B: 1200 <--> 3300 mV at 1200 mV
regulator: SW5: 1200 <--> 1975 mV at 1800 mV
regulator: SWBST:
regulator: VPLL: 1200 <--> 1800 mV at 1800 mV
regulator: VREFDDR:
regulator: VDAC: 2500 <--> 2775 mV at 2500 mV
regulator: VUSB:
regulator: VUSB2: 2500 <--> 3000 mV at 2500 mV
regulator: VGEN1: 1200 <--> 1550 mV at 1200 mV
regulator: VGEN2: 2500 <--> 3300 mV at 2500 mV
Device spi3.0 probed
mx50_rdp_pm: Power Management for MX50 RDP
mx50_rdp_pm: END_FACTOR: 7 (charger_reboot)
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 232K
LPMode driver module loaded
Static Power Management for Freescale i.MX5
PM driver module loaded
sdram autogating driver module loaded
Bus freq driver module loaded
mxc_dvfs_core_probe
DVFS driver module loaded
i.MXC CPU frequency driver
DVFS PER driver module loaded
ashmem: initialized
msgmni has been set to 906
alg: No test for stdrng (krng)
cryptodev: driver loaded.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
regulator: DISPLAY:
regulator: VCOM: at 1250 mV
regulator: V3P3_CTRL:
regulator: PMIC_TEMP: at 0 mV
regulator: PWR0_CTRL:
tps65180 0-0068: PMIC TPS6518x for eInk display
pwm_led_probe is called
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a Freescale i.MX
console [ttymxc0] enabled, bootconsole disabled
console [ttymxc0] enabled, bootconsole disabled
mxcintuart.1: ttymxc1 at MMIO 0x53fc0000 (irq = 32) is a Freescale i.MX
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a Freescale i.MX
loop: module loaded
pmem_adsp: 0 init
pmem_gpu: 0 init
Android kernel panic handler initialized (bind=kpanic)
m25p80 spi3.1: found n25q032, expected m25p32
m25p80 spi3.1: n25q032 (4096 Kbytes)
Creating 4 MTD partitions on "m25p80":
0x000000000000-0x000000180000 : "BOOTLOADER"
0x000000180000-0x000000300000 : "WAVEFORM"
0x000000300000-0x0000003e0000 : "BOOTLOGO"
0x0000003e0000-0x000000400000 : "ZWV"
vcan: Virtual CAN interface driver
Freescale FlexCAN Driver
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ARC USBOTG Device Controller driver (1 August 2005)
mmc_nvm: physical memory mapping
Android usb driver initialize
android_usb gadget: android_usb ready
fsl-usb2-udc: bind to driver android_usb
android gadget: register function usb_mass_storage
MXC keypad loaded
input: mxckpd as /devices/virtual/input/input0
input: mxc_power_key as /devices/virtual/input/input1
PMIC powerkey probe
input: MSP430 Infrared TouchScreen as /devices/virtual/input/input2
mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
pmic rtc probe start
using rtc device, mc34708_rtc, for alarms
pmic_rtc mc34708_rtc.1: rtc core: registered mc34708_rtc as rtc1
pmic rtc probe succeed
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
Linux video capture interface: v2.00
APM Battery Driver
add stts75 i2c driver
MXC WatchDog Driver 2.0
MXC Watchdog # 0 Timer: initial timeout 60 sec
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
PMIC ADC start probe
set the registers according to the MC34708ER
set the registers according to the MC34708ER
battery 978: heatsave_data, 46, 44, 48, 51, 20, 40, 25
battery 1023: interval, 5, 500, 60, 5, 5
battery 1036: values, 2, 0, 100000, 450000, 4100000
battery 1050: config, 3000000, 3850000, 4200000, 4350000, 3400000, 50000
battery 1071: temp, 5, 0, 60, 450
battery 1082: charging, 4080000, 4020000, 4030000, 3970000
power_supply ripley_usb_charger: usb cable status: online
heatsave 369: Starting heat save thread
gpu mmu enabled
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 0 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
battery status: 1, old status: 1, point: 0
mmc1: SDHCI detect irq 0 irq 2 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc2: SDHCI detect irq 0 irq 3 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc3: SDHCI detect irq 0 irq 4 INTERNAL DMA
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
sgtl5000-i2c 1-000a: SGTL5000 revision 17
init_coulomb is 888 mAh
sgtl5000: mode 0x00
sgtl5000_power_down: CHIP_ANA_POWER read : 0x2000
sgtl5000_power_down: CHIP_DIG_POWER read : 0x0000
No device for DAI imx-ssi-1-0
No device for DAI imx-ssi-1-1
No device for DAI imx-ssi-2-0
No device for DAI imx-ssi-2-1
No device for DAI imx-spdif-dai
ALSA device list:
No soundcards found.
nf_conntrack version 0.5.0 (7253 buckets, 29012 max)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
mmc2: Command-Timeout cmd(op=52, arg=0x00000c00)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
mmc2: Command-Timeout cmd(op=52, arg=0x80000c08)
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
mmc2: Command-Timeout cmd(op=8, arg=0x000001aa)
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
mmc2: Command-Timeout cmd(op=5, arg=0x00000000)
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
reading waveform data
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
mmc2: Command-Timeout cmd(op=55, arg=0x00000000)
finished reading compressed waveform (53606 -> 1310720)
mmc2: new high speed MMC card at address 0001
mmcblk0: mmc2:0001 SJS00M 3.64 GiB
mmcblk0:
Alternate GPT is invalid, using primary GPT.
p1 (misc) p2 (nvm) p3 (recovery) p4 (boot) p5 (system) p6 (cache) p7 (userdata) p8 (media) p9 (gptbk)
part_name:misc start_sect:3808
part_name:nvm start_sect:3840
mmc_nvm: read success
regulator_init_complete: disabling PMIC_TEMP
pmic_rtc mc34708_rtc.1: setting system clock to 2012-04-13 18:05:14 UTC (1334340314)
apanic: Bound to mtd partition 'kpanic'
apanic: No panic data available
Android panic create MTDRAM device (addr:0x8d500000, size:2048 KB)
Freeing init memory: 180K
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
mxc_wdt mxc_wdt.0: start watchdog petting service
mmc_nvm: write success
sh: can't access tty; job control turned off
serio: Serial port ttymxc1
$ init: init() vcom(NVM) = 0x1630
warning: `rild' uses 32-bit capabilities (legacy support in use)
pmem: request for physical address of pmem region from process 2118.
mmc_nvm: write success
request_suspend_state: on (3->0) at 17445453127 (2012-04-13 18:05:28.482323375 UTC)
pwm-led pwm-led.0: pwm_led_delay_on_store: state is 0
binder: release proc 2190, transaction 575, not freed
pwm-led pwm-led.0: pwm_led_delay_on_store: state is 10
binder: release proc 2189, transaction 576, not freed
pwm-led pwm-led.0: pwm_led_delay_off_store: state is 0
Not all allocated memory blocks were freed. Doing it now.
Freeing list entry #0, gpuaddr=132000
Freeing list entry #1, gpuaddr=137000
Freeing list entry #2, gpuaddr=13c000
Freeing list entry #3, gpuaddr=141000
Freeing list entry #4, gpuaddr=146000
Freeing list entry #5, gpuaddr=75445000
Freeing list entry #6, gpuaddr=14b000
Freeing list entry #7, gpuaddr=150000
Freeing list entry #8, gpuaddr=155000
Freeing list entry #9, gpuaddr=15a000
Freeing list entry #10, gpuaddr=15f000
Freeing list entry #11, gpuaddr=75446000
$
$ cat /proc/ve
/proc/ve: No such file or directory
$ cat /proc/version
Linux version 2.6.35.3-ge281108 (si-user@android-212) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Mon Aug 5 09:31:53 JST 2013
$ set wimax power interface access
mmc3: card claims to support voltages below the defined range. These will be ignored.
mmc3: new high speed SDIO card at address 0001
subtype[1] = 0x000000ff
subtype[2] = 0x00000000
subtype[4] = 0x00000000
subtype[8] = 0x00000000
Initialization Done!
Writing 0x28 to 0xFC register
uiEEPROMFlag : 0x2 0x0
NVM Type : 0x0
Chosen Aggregated Mode
LinkUp Config : 0x3
size of EEPROM ....:8000
GPIO's bit map correspond to LED :0x0SPIO's bit map correspond to LED :0x0MAC Address seems ok in NVM - reporting 0:37:6d:33:23:56
Trying to open DDR settings file
Unable To Open File /lib/firmware/ddrxvi.bin, err fffffffeNo DDR Setting Override FILE /lib/firmware/ddrxvi.bin is present
Writing default DDR settings
ddr_init: Register Count is =131
Downloading the Firmware.......From Directory:/system/usr/share/wimax/beceem/Firmware
Last chunk size :1440
Chip HAs come out of reset ...
interrupt_service_thread 160
Device Interface Name is wimax0
***** REG CD: x0 xbece3502
register_control_device_interface: Got Major No: 252
Got Major No: 252
bcm_notify_event: Register RefCount: 5
register_networkdev: Beceem Network device name is wimax0!
pwm-led pwm-led.0: pwm_led_delay_on_store: state is 10
pwm-led pwm-led.0: pwm_led_delay_off_store: state is 0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment