NVIDIA Suspend fix

setup-nvdia-suspend.sh

# Use systemd for managing NVIDIA driver suspend in drivers ====>>> PRIOR to version 470 <<<=====
# https://download.nvidia.com/XFree86/Linux-x86_64/450.66/README/powermanagement.html
# https://forums.developer.nvidia.com/t/unable-to-set-nvidia-kernel-module-parameters/161306
# Please note: In Fedora Linux you may need to just install the xorg-x11-drv-nvidia-power pakage 
# as sugested by @goombah88 in the comments below. 

TMP_PATH=/var/tmp
TMPL_PATH=/usr/share/doc/nvidia-driver-460/

echo "options nvidia NVreg_PreserveVideoMemoryAllocations=1 NVreg_TemporaryFilePath=${TMP_PATH}" | sudo tee /etc/modprobe.d/nvidia-power-management.conf 

sudo install --mode 644 "${TMPL_PATH}/nvidia-suspend.service" /etc/systemd/system
sudo install --mode 644 "${TMPL_PATH}/nvidia-hibernate.service" /etc/systemd/system
sudo install --mode 644 "${TMPL_PATH}/nvidia-resume.service" /etc/systemd/system
sudo install "${TMPL_PATH}/nvidia" /lib/systemd/system-sleep
sudo install "${TMPL_PATH}/nvidia-sleep.sh" /usr/bin

sudo systemctl enable nvidia-suspend.service
sudo systemctl enable nvidia-hibernate.service
sudo systemctl enable nvidia-resume.service

The method works. In case you need fresh files install the services, you can get your driver version from NVIDIA. Use nvidia-smi to get the exact version and then run the .run file with --extract-only flag: sudo bash NVIDIA-Linux-x86_64-515.65.01.run --extract-only.该方法有效。如果您需要新文件，请安装服务，您可以从 NVIDIA 获取您的驱动程序版本。使用 nvidia-smi 获取确切版本，然后使用 .run 文件和 --extract-only 标志运行： sudo bash NVIDIA-Linux-x86_64-515.65.01.run --extract-only 。
Then you run the given commands setting the TMPL_PATH to the path where you've extracted the files. Keep in mind that the files for this driver (515.65.01) have a slightly different locations as stated in the original post. So the updated commands should be like this:然后，您运行给定的命令，将 TMPL_PATH 设置为您提取文件的路径。请记住，此驱动程序 (515.65.01) 的文件位置与原始帖子中所述略有不同。因此，更新后的命令应如下所示：

TMPL_PATH=/home/user/Downloads/NVIDIA-Linux-x86_64-515.65.01/systemd

sudo install --mode 644 "${TMPL_PATH}/system/nvidia-suspend.service" /etc/systemd/system
sudo install --mode 644 "${TMPL_PATH}/system/nvidia-hibernate.service" /etc/systemd/system
sudo install --mode 644 "${TMPL_PATH}/system/nvidia-resume.service" /etc/systemd/system
sudo install "${TMPL_PATH}/system-sleep/nvidia" /lib/systemd/system-sleep
sudo install "${TMPL_PATH}/nvidia-sleep.sh" /usr/bin

sudo systemctl enable nvidia-suspend.service
sudo systemctl enable nvidia-hibernate.service
sudo systemctl enable nvidia-resume.service

535.183.01 works! thanks !535.183.01 有用！谢谢！

Sadly,it doesn't work for me.same is 535.183.01. Until now ,I have tried almost all methods ,no one work for me.It's so terrible.

same with me - Gentoo fully up to date as of today. - I'm not able to go past over 535.183.01 or kernel 6.9. Terrible.

Fix also stopped working for me. Frustrating. @chanh2018 what do these changes do?

Fix also stopped working for me. Frustrating. @chanh2018 what do these changes do?

To preserve video memory for NVIDIA. It works for me.

After a completely new install of Ubuntu, which was needed as my NVME SSD WD 750 1TB completely died suddenly, I reinstalled 24.04 on a new Samsung 780 1TB. Most worked smoothly except the Suspend. Resume gave me a black screen with

DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP]  REquest device [fo:1f.0] fault index 0x0 [fault reason 0x25] Blocked compatibility format interrupt request

I just tried the following from @chanh2018 and I just got my first successful resume. 😀

sudo nano /etc/modprobe.d/nvidia-graphics-drivers-kms.conf

and add these lines into it:

options nvidia-drm fbdev=1
options nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp

Note: the error messages still appear quickly on screen, but the system no longer hangs after that...

I also have Mint 22 based on ubuntu 24.04 and had the same problem. This solved the problem for me:

https://forums.developer.nvidia.com/t/fixed-suspend-resume-issues-with-the-driver-version-470/187150/3

Any news on this? Recently my new Working Notebook with dedicated nvidia gpu worked fine (with Ubuntu 23.04 and proprietary nvidia drivers). But after some update of Kernel and/or nvidia drivers my Notebook didn't wake-up from sleep mode. It's still available by SSH! But monitors keep off/no-signal whatever I do.

It totally sucks as I have to reboot (REISUB-Reboot) my Workstation nearly every morning and every morning I'm praying monitors won''t keep blank giving me the chance just to start working.

Any solution that works? I've tried nearly everything and now I'm even trying to totally disable sleep/hibernate/standby stuff.

Btw. I have linux-kernel 6.8.0-101041(-tuxedo) and (ubuntu/dpkg) nvidia drivers 560.

apparently fix is going to be available in upcoming 565 linux driver release. NVIDIA/open-gpu-kernel-modules#662 (comment)

sudo nano /etc/modprobe.d/nvidia-graphics-drivers-kms.conf

and add these lines into it:

options nvidia-drm fbdev=1 options
nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp

I can confirm this also fixes the resume from suspend problem for me:
Ubuntu 24.04, Nvidia Quadro M2000M, with the latest nvidia driver 560 and it works also on wayland

thank you @chanh2018!