dmesg again

dmesg.txt

[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.6-v7+ (root@vagrant-ubuntu-precise-32) (gcc version 4.8.3 20140106 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.01 - Linaro GCC 2013.11) ) #1 SMP PREEMPT Thu Feb 26 03:18:12 UTC 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 2 Model B
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 80820480, node_mem_map ba093000
[    0.000000]   Normal zone: 1888 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 11 pages/cpu @ba05d000 s12864 r8192 d24000 u45056
[    0.000000] pcpu-alloc: s12864 r8192 d24000 u45056 alloc=11*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239776
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa01041 bcm2709.serial=0x27731591 smsc95xx.macaddr=B8:27:EB:73:15:91 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:VGA8x8
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 940740K/966656K available (5785K kernel code, 377K rwdata, 1760K rodata, 396K init, 771K bss, 25916K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xbb800000 - 0xff000000   (1080 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80766748   (7546 kB)
[    0.000000]       .init : 0x80767000 - 0x807ca000   ( 396 kB)
[    0.000000]       .data : 0x807ca000 - 0x808287ec   ( 378 kB)
[    0.000000]        .bss : 0x808287ec - 0x808e96d4   ( 772 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:480
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[    0.000015] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000039] Switching to timer-based delay loop, resolution 52ns
[    0.000329] Console: colour dummy device 80x30
[    0.001784] console [tty1] enabled
[    0.001834] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001917] pid_max: default: 32768 minimum: 301
[    0.002332] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002393] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003675] Initializing cgroup subsys memory
[    0.003764] Initializing cgroup subsys devices
[    0.003818] Initializing cgroup subsys freezer
[    0.003871] Initializing cgroup subsys net_cls
[    0.003938] Initializing cgroup subsys blkio
[    0.004057] CPU: Testing write buffer coherency: ok
[    0.004170] ftrace: allocating 19969 entries in 59 pages
[    0.053661] CPU0: update cpu_capacity 1024
[    0.053739] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.053777] [bcm2709_smp_prepare_cpus] enter
[    0.053943] Setting up static identity map for 0x536f78 - 0x536fd0
[    0.113595] [bcm2709_boot_secondary] cpu:1 started (0) 17
[    0.113902] CPU1: Booted secondary processor
[    0.113910] [bcm2709_secondary_init] enter cpu:1
[    0.113965] CPU1: update cpu_capacity 1024
[    0.113974] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.133574] [bcm2709_boot_secondary] cpu:2 started (0) 17
[    0.133829] CPU2: Booted secondary processor
[    0.133835] [bcm2709_secondary_init] enter cpu:2
[    0.133866] CPU2: update cpu_capacity 1024
[    0.133874] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.153628] [bcm2709_boot_secondary] cpu:3 started (0) 17
[    0.153870] CPU3: Booted secondary processor
[    0.153877] [bcm2709_secondary_init] enter cpu:3
[    0.153908] CPU3: update cpu_capacity 1024
[    0.153917] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.154012] Brought up 4 CPUs
[    0.154133] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.154166] CPU: All CPU(s) started in SVC mode.
[    0.155205] devtmpfs: initialized
[    0.178309] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.180469] pinctrl core: initialized pinctrl subsystem
[    0.183628] NET: Registered protocol family 16
[    0.189296] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.213421] cpuidle: using governor ladder
[    0.243449] cpuidle: using governor menu
[    0.243896] bcm2709.uart_clock = 3000000
[    0.244857] ------------[ cut here ]------------
[    0.244907] WARNING: CPU: 0 PID: 1 at arch/arm/mach-bcm2709/armctrl.c:148 armctrl_xlate+0x18c/0x27c()
[    0.244954] Modules linked in:
[    0.244993] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.6-v7+ #1
[    0.245059] [<80016c94>] (unwind_backtrace) from [<80012bb8>] (show_stack+0x20/0x24)
[    0.245119] [<80012bb8>] (show_stack) from [<8052f2c4>] (dump_stack+0x98/0xd8)
[    0.245180] [<8052f2c4>] (dump_stack) from [<800251a0>] (warn_slowpath_common+0x7c/0xa0)
[    0.245241] [<800251a0>] (warn_slowpath_common) from [<80025280>] (warn_slowpath_null+0x2c/0x34)
[    0.245301] [<80025280>] (warn_slowpath_null) from [<800200b4>] (armctrl_xlate+0x18c/0x27c)
[    0.245359] [<800200b4>] (armctrl_xlate) from [<8006e708>] (irq_create_of_mapping+0x74/0x120)
[    0.245419] [<8006e708>] (irq_create_of_mapping) from [<80439550>] (irq_of_parse_and_map+0x34/0x3c)
[    0.245479] [<80439550>] (irq_of_parse_and_map) from [<80439580>] (of_irq_to_resource+0x28/0xc8)
[    0.245537] [<80439580>] (of_irq_to_resource) from [<8043966c>] (of_irq_to_resource_table+0x4c/0x5c)
[    0.245595] [<8043966c>] (of_irq_to_resource_table) from [<804371d0>] (of_device_alloc+0xf4/0x16c)
[    0.245653] [<804371d0>] (of_device_alloc) from [<804372a0>] (of_platform_device_create_pdata+0x58/0xa8)
[    0.245713] [<804372a0>] (of_platform_device_create_pdata) from [<804373f8>] (of_platform_bus_create+0xe4/0x2f4)
[    0.245774] [<804373f8>] (of_platform_bus_create) from [<8043745c>] (of_platform_bus_create+0x148/0x2f4)
[    0.245832] [<8043745c>] (of_platform_bus_create) from [<80437758>] (of_platform_populate+0x74/0xac)
[    0.245893] [<80437758>] (of_platform_populate) from [<8076eb6c>] (bcm2709_init+0x54/0x3f4)
[    0.245954] [<8076eb6c>] (bcm2709_init) from [<8076a834>] (customize_machine+0x24/0x48)
[    0.246011] [<8076a834>] (customize_machine) from [<80008854>] (do_one_initcall+0x90/0x1d8)
[    0.246068] [<80008854>] (do_one_initcall) from [<80767e2c>] (kernel_init_freeable+0x110/0x1d4)
[    0.246126] [<80767e2c>] (kernel_init_freeable) from [<8052a8f4>] (kernel_init+0x18/0xfc)
[    0.246183] [<8052a8f4>] (kernel_init) from [<8000ec08>] (ret_from_fork+0x14/0x20)
[    0.246254] ---[ end trace 9f85f27f1ea73c82 ]---
[    0.248458] No ATAGs?
[    0.248526] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.248582] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.248646] mailbox: Broadcom VideoCore Mailbox driver
[    0.248798] bcm2708_vcio: mailbox at f300b880
[    0.249173] bcm_power: Broadcom power driver
[    0.249210] bcm_power_open() -> 0
[    0.249236] bcm_power_request(0, 8)
[    0.749916] bcm_mailbox_read -> 00000080, 0
[    0.749948] bcm_power_request -> 0
[    0.750107] Serial: AMBA PL011 UART driver
[    0.750257] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    1.472039] console [ttyAMA0] enabled
[    1.546888] SCSI subsystem initialized
[    1.550906] usbcore: registered new interface driver usbfs
[    1.556572] usbcore: registered new interface driver hub
[    1.562030] usbcore: registered new device driver usb
[    1.569043] Switched to clocksource arch_sys_counter
[    1.603952] FS-Cache: Loaded
[    1.607208] CacheFiles: Loaded
[    1.622705] NET: Registered protocol family 2
[    1.628338] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.635594] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.642294] TCP: Hash tables configured (established 8192 bind 8192)
[    1.648766] TCP: reno registered
[    1.652045] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.658031] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.664792] NET: Registered protocol family 1
[    1.669645] RPC: Registered named UNIX socket transport module.
[    1.675588] RPC: Registered udp transport module.
[    1.680374] RPC: Registered tcp transport module.
[    1.685097] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.692583] ------------[ cut here ]------------
[    1.697238] WARNING: CPU: 0 PID: 1 at arch/arm/mach-bcm2709/armctrl.c:148 armctrl_xlate+0x18c/0x27c()
[    1.706528] Modules linked in:
[    1.709640] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W      3.18.6-v7+ #1
[    1.717084] [<80016c94>] (unwind_backtrace) from [<80012bb8>] (show_stack+0x20/0x24)
[    1.724892] [<80012bb8>] (show_stack) from [<8052f2c4>] (dump_stack+0x98/0xd8)
[    1.732183] [<8052f2c4>] (dump_stack) from [<800251a0>] (warn_slowpath_common+0x7c/0xa0)
[    1.740337] [<800251a0>] (warn_slowpath_common) from [<80025280>] (warn_slowpath_null+0x2c/0x34)
[    1.749182] [<80025280>] (warn_slowpath_null) from [<800200b4>] (armctrl_xlate+0x18c/0x27c)
[    1.757568] [<800200b4>] (armctrl_xlate) from [<8006e708>] (irq_create_of_mapping+0x74/0x120)
[    1.766148] [<8006e708>] (irq_create_of_mapping) from [<804396c4>] (of_irq_get+0x48/0x58)
[    1.774383] [<804396c4>] (of_irq_get) from [<80352640>] (platform_get_irq+0x2c/0xa8)
[    1.782186] [<80352640>] (platform_get_irq) from [<8001a890>] (cpu_pmu_device_probe+0x140/0x36c)
[    1.791030] [<8001a890>] (cpu_pmu_device_probe) from [<80352d18>] (platform_drv_probe+0x54/0xb4)
[    1.799871] [<80352d18>] (platform_drv_probe) from [<80350dd8>] (really_probe+0x8c/0x220)
[    1.808082] [<80350dd8>] (really_probe) from [<80351078>] (__driver_attach+0xa8/0xac)
[    1.815979] [<80351078>] (__driver_attach) from [<8034f1a8>] (bus_for_each_dev+0x74/0xa4)
[    1.824214] [<8034f1a8>] (bus_for_each_dev) from [<8035095c>] (driver_attach+0x28/0x30)
[    1.832271] [<8035095c>] (driver_attach) from [<803505e4>] (bus_add_driver+0x154/0x1fc)
[    1.840329] [<803505e4>] (bus_add_driver) from [<803519b8>] (driver_register+0x88/0x108)
[    1.848454] [<803519b8>] (driver_register) from [<80352c38>] (__platform_driver_register+0x58/0x6c)
[    1.857557] [<80352c38>] (__platform_driver_register) from [<8076c528>] (register_pmu_driver+0x24/0x4c)
[    1.867008] [<8076c528>] (register_pmu_driver) from [<80008854>] (do_one_initcall+0x90/0x1d8)
[    1.875587] [<80008854>] (do_one_initcall) from [<80767e2c>] (kernel_init_freeable+0x110/0x1d4)
[    1.884340] [<80767e2c>] (kernel_init_freeable) from [<8052a8f4>] (kernel_init+0x18/0xfc)
[    1.892571] [<8052a8f4>] (kernel_init) from [<8000ec08>] (ret_from_fork+0x14/0x20)
[    1.900182] ---[ end trace 9f85f27f1ea73c83 ]---
[    1.904815] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.913202] bcm2708_dma: DMA manager at f3007000
[    1.918010] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.927957] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.934470] audit: initializing netlink subsys (disabled)
[    1.939978] audit: type=2000 audit(1.639:1): initialized
[    1.961689] VFS: Disk quotas dquot_6.5.2
[    1.966006] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.975708] FS-Cache: Netfs 'nfs' registered for caching
[    1.982063] NFS: Registering the id_resolver key type
[    1.987200] Key type id_resolver registered
[    1.991463] Key type id_legacy registered
[    1.996546] msgmni has been set to 1853
[    2.002117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.009835] io scheduler noop registered
[    2.013788] io scheduler deadline registered (default)
[    2.019304] io scheduler cfq registered
[    2.025815] BCM2708FB: allocated DMA memory fac00000
[    2.030862] BCM2708FB: allocated DMA channel 0 @ f3007000
[    2.066548] Console: switching to colour frame buffer device 228x123
[    2.092372] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[    2.100138] uart-pl011 dev:f1: no DMA platform data
[    2.105629] vc-cma: Videocore CMA driver
[    2.109653] vc-cma: vc_cma_base      = 0x00000000
[    2.114412] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    2.119893] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    2.137401] brd: module loaded
[    2.146635] loop: module loaded
[    2.150233] vchiq: vchiq_init_state: slot_zero = 0xba800000, is_master = 0
[    2.158002] Loading iSCSI transport class v2.0-870.
[    2.163969] usbcore: registered new interface driver smsc95xx
[    2.169879] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.376003] Core Release: 2.80a
[    2.379221] Setting default values for core params
[    2.384105] Finished setting default values for core params
[    2.590171] Using Buffer DMA mode
[    2.593532] Periodic Transfer Interrupt Enhancement - disabled
[    2.599445] Multiprocessor Interrupt Enhancement - disabled
[    2.605078] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.609523] Dedicated Tx FIFOs mode
[    2.613461] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[    2.623451] FIQ FSM acceleration enabled for :
[    2.623451] Non-periodic Split Transactions
[    2.623451] Periodic Split Transactions
[    2.623451] High-Speed Isochronous Endpoints
[    2.640372] dwc_otg: Microframe scheduler enabled
[    2.640445] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803e43b0
[    2.646435] WARN::hcd_init_fiq:413: FIQ ASM at 0x803e470c length 36
[    2.652774] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb806000
[    2.658882] dwc_otg bcm2708_usb: DWC OTG Controller
[    2.663880] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    2.671238] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    2.676828] Init: Port Power? op_state=1
[    2.680818] Init: Power Port (0)
[    2.684374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.691270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.698571] usb usb1: Product: DWC OTG Controller
[    2.703352] usb usb1: Manufacturer: Linux 3.18.6-v7+ dwc_otg_hcd
[    2.709447] usb usb1: SerialNumber: bcm2708_usb
[    2.715042] hub 1-0:1.0: USB hub found
[    2.718899] hub 1-0:1.0: 1 port detected
[    2.723423] dwc_otg: FIQ enabled
[    2.723437] dwc_otg: NAK holdoff enabled
[    2.723448] dwc_otg: FIQ split-transaction FSM enabled
[    2.723488] Module dwc_common_port init
[    2.723869] usbcore: registered new interface driver usb-storage
[    2.730291] mousedev: PS/2 mouse device common for all mice
[    2.736622] bcm2835-cpufreq: min=600000 max=900000
[    2.741901] sdhci: Secure Digital Host Controller Interface driver
[    2.748152] sdhci: Copyright(c) Pierre Ossman
[    2.752765] DMA channels allocated for the MMC driver
[    2.789091] Load BCM2835 MMC driver
[    2.792936] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.802663] ledtrig-cpu: registered to indicate activity on CPUs
[    2.811101] hidraw: raw HID events driver (C) Jiri Kosina
[    2.816872] usbcore: registered new interface driver usbhid
[    2.824625] usbhid: USB HID core driver
[    2.831005] TCP: cubic registered
[    2.836461] Initializing XFRM netlink socket
[    2.840916] NET: Registered protocol family 17
[    2.848922] Key type dns_resolver registered
[    2.853879] Registering SWP/SWPB emulation handler
[    2.859725] registered taskstats version 1
[    2.864152] vc-sm: Videocore shared memory driver
[    2.868920] [vc_sm_connected_init]: start
[    2.873698] [vc_sm_connected_init]: end - returning 0
[    2.880090] Waiting for root device /dev/mmcblk0p2...
[    2.898033] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.910665] mmc0: new high speed SDHC card at address aaaa
[    2.916841] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
[    2.923117]  mmcblk0: p1 p2
[    2.929206] Indeed it is in host mode hprt0 = 00021501
[    3.004177] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.012533] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    3.021968] devtmpfs: mounted
[    3.025721] Freeing unused kernel memory: 396K (80767000 - 807ca000)
[    3.109213] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    3.115992] Indeed it is in host mode hprt0 = 00001101
[    3.319502] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    3.326328] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.334585] hub 1-1:1.0: USB hub found
[    3.338538] hub 1-1:1.0: 5 ports detected
[    3.619392] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.739911] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.746949] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.758637] smsc95xx v1.0.4
[    3.823444] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:73:15:91
[    3.919400] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    4.086548] usb 1-1.3: New USB device found, idVendor=17ef, idProduct=6009
[    4.099737] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.114269] usb 1-1.3: Product: ThinkPad USB Keyboard with TrackPoint
[    4.127675] usb 1-1.3: Manufacturer: Lite-On Technology Corp.
[    4.154673] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:17EF:6009.0001/input/input0
[    4.177493] hid-generic 0003:17EF:6009.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-bcm2708_usb-1.3/input0
[    4.242036] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:17EF:6009.0002/input/input1
[    4.265731] hid-generic 0003:17EF:6009.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-bcm2708_usb-1.3/input1
[    4.267595] udevd[175]: starting version 175
[    4.808594] bcm2708_i2c_init_pinmode(1,2)
[    4.823392] bcm2708_i2c_init_pinmode(1,3)
[    4.846944] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
[    6.817846] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    7.079836] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    7.097293] random: nonblocking pool is initialized
[    7.707949] i2c /dev entries driver
[   12.202598] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   13.766070] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   15.579983] Adding 102396k swap on /var/swap.  Priority:-1 extents:2 across:2162644k SSFS