Skip to content

Instantly share code, notes, and snippets.

@brianthelion

brianthelion/laptop__etc-exports Secret

Last active July 31, 2019 21:34
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save brianthelion/ec61956bd0426d1d50f05181cce278c6 to your computer and use it in GitHub Desktop.
Save brianthelion/ec61956bd0426d1d50f05181cce278c6 to your computer and use it in GitHub Desktop.
Download ZIP
Jetson Nano nfsroot failure
Raw
laptop__etc-exports
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
#
# Example for NFSv2 and NFSv3:
# /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check)
#
# Example for NFSv4:
# /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
# /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check)
#
/srv/nfs/instances/00000 10.42.0.55(rw,nohide,insecure,no_subtree_check,async,no_root_squash)
Raw
laptop__var_log_syslog
Jul 31 16:11:58 dathon dnsmasq-dhcp[12179]: DHCPDISCOVER(enp0s31f6) 00:04:4b:e3:fd:07
Jul 31 16:11:58 dathon dnsmasq-dhcp[12179]: DHCPOFFER(enp0s31f6) 10.42.0.55 00:04:4b:e3:fd:07
Jul 31 16:11:58 dathon dnsmasq-dhcp[12179]: DHCPREQUEST(enp0s31f6) 10.42.0.55 00:04:4b:e3:fd:07
Jul 31 16:11:58 dathon dnsmasq-dhcp[12179]: DHCPACK(enp0s31f6) 10.42.0.55 00:04:4b:e3:fd:07
Jul 31 16:11:59 dathon rpc.mountd[7160]: authenticated mount request from 10.42.0.55:777 for /srv/nfs/instances/00000 (/srv/nfs/instances/00000)
Jul 31 16:12:52 dathon gnome-shell[2288]: [Gnome Email Notifications] Checking mail
Jul 31 16:13:23 dathon dnsmasq-dhcp[12179]: DHCPDISCOVER(enp0s31f6) 00:04:4b:e3:fd:07
Jul 31 16:13:23 dathon dnsmasq-dhcp[12179]: DHCPOFFER(enp0s31f6) 10.42.0.55 00:04:4b:e3:fd:07
Jul 31 16:13:23 dathon dnsmasq-dhcp[12179]: DHCPREQUEST(enp0s31f6) 10.42.0.55 00:04:4b:e3:fd:07
Jul 31 16:13:23 dathon dnsmasq-dhcp[12179]: DHCPACK(enp0s31f6) 10.42.0.55 00:04:4b:e3:fd:07
Jul 31 16:13:23 dathon rpc.mountd[7160]: authenticated mount request from 10.42.0.55:732 for /srv/nfs/instances/00000 (/srv/nfs/instances/00000)
Raw
nano__boot-extlinux-extlinux.conf
TIMEOUT 30
DEFAULT primary
MENU TITLE p3450-porg eMMC boot options
LABEL primary
MENU LABEL primary kernel
LINUX /boot/Image
INITRD /boot/initrd
APPEND ${cbootargs} root=/dev/nfs ip=dhcp nfsroot=10.42.0.1:/srv/nfs/instances/00000,v3 rw rootwait
Raw
nano__serial-output_diff
# diff <(sort -u success.log) <(sort -u fail.log) -y --suppress-common-lines --ignore-blank-lines --ignore-all-space
34048008 bytes read in 1534 ms (21.2 MiB/s) | 34048008 bytes read in 1533 ms (21.2 MiB/s)
663 bytes read in 124 ms (4.9 KiB/s) | 663 bytes read in 123 ms (4.9 KiB/s)
nano-dathon login: [ 37.996275] watchdog: watchdog0: watchd <
[timestamp] audit: type=2000 audit(0.543:1): initialized | [timestamp] audit: type=2000 audit(0.551:1): initialized
[timestamp] Basic modules init took 5711671 us | [timestamp] Basic modules init took 5716444 us
[timestamp] Carveout took -1539335 us | [timestamp] Carveout took -1539333 us
[timestamp] CPU initialization took 2039997 us | [timestamp] CPU initialization took 2040001 us
[timestamp] eth0: 0xffffff800a2fe000, 00:04:4b:e3:fd:07, IRQ | [timestamp] eth0: 0xffffff800a35e000, 00:04:4b:e3:fd:07, IRQ
> [timestamp] mmcblk mmc0:0001: Card claimed for testing.
[timestamp] Next stage binary read took 1527653 us | [timestamp] Next stage binary read took 1527652 us
> [timestamp] nfs: server 10.42.0.1 not responding, still tryin
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 al | [timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 al
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 al | [timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 al
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 al | [timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 al
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 al | [timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 al
[timestamp] platform 70006000.serial: domain=ffffffc0f9480618 | [timestamp] platform 70006000.serial: domain=ffffffc0f9482618
[timestamp] platform sdhci-tegra.0: domain=ffffffc0f9ad5e58 a | [timestamp] platform sdhci-tegra.0: domain=ffffffc0f9550e58 a
[timestamp] platform smmu_test: domain=ffffffc0f9bf0558 alloc | [timestamp] platform smmu_test: domain=ffffffc0f9400558 alloc
[timestamp] platform sound: domain=ffffffc0f9480b58 allocates | [timestamp] platform sound: domain=ffffffc0f9482b58 allocates
[timestamp] platform tegra-carveouts: domain=ffffffc0f9bf0318 | [timestamp] platform tegra-carveouts: domain=ffffffc0f9400318
[timestamp] platform tegradc.0: domain=ffffffc0f948ea98 alloc | [timestamp] platform tegradc.0: domain=ffffffc0f948fa98 alloc
[timestamp] platform tegradc.1: domain=ffffffc0f948ecd8 alloc | [timestamp] platform tegradc.1: domain=ffffffc0f948fcd8 alloc
[timestamp] pmic max77620 NVERC : 0x40 | [timestamp] pmic max77620 NVERC : 0x0
[timestamp] Power-up reason: pmc por | [timestamp] Power-up reason: software reset
[timestamp] reboot: Restarting system <
[timestamp] systemd[1]: Created slice system-serial\x2dgetty. <
[timestamp] systemd[1]: Listening on Journal Socket (/dev/log | [timestamp] systemd[1]: Listening on Journal Socket.
[timestamp] systemd[1]: Listening on RPCbind Server Activatio | [timestamp] systemd[1]: Mounting POSIX Message Queue File Sys
[timestamp] systemd[1]: Reached target Swap. | [timestamp] systemd[1]: Reached target User and Group Name Lo
> [timestamp] systemd[1]: Set up automount Arbitrary Executable
[timestamp] systemd[1]: System time before build time, advanc | [timestamp] systemd-journald[1940]: Received request to flush
[timestamp] systemd-journald[1848]: Received request to flush <
[timestamp] systemd-shutdow: 33 output lines suppressed due t <
[timestamp] Tegraboot started after 53279 us | [timestamp] Tegraboot started after 88416 us
[timestamp] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_R | [timestamp] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_R
[timestamp] tegra-pmc: ### PMC reset status reg: 0x0 | [timestamp] tegra-pmc: ### PMC reset status reg: 0x3
[timestamp] tegra_rtc 7000e000.rtc: setting system clock to 2 | [timestamp] tegra_rtc 7000e000.rtc: setting system clock to 2
[timestamp] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f95d6 | [timestamp] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9085
[timestamp] tegra-xusb 70090000.xusb: Host not halted after 1 <
[timestamp] Total time taken by TegraBoot 7739986 us | [timestamp] Total time taken by TegraBoot 7744764 us
Ubuntu 18.04.2 LTS nano-dathon ttyS0 <
Raw
nano__serial-output_failure
[timestamp] [TegraBoot] (version 00.00.2018.01-l4t-33e7fa82)
[timestamp] Processing in cold boot mode Bootloader 2
[timestamp] A02 Bootrom Patch rev = 1023
[timestamp] Power-up reason: software reset
[timestamp] No Battery Present
[timestamp] pmic max77620 reset reason
[timestamp] pmic max77620 NVERC : 0x0
[timestamp] RamCode = 0
[timestamp] Platform has DDR4 type RAM
[timestamp] max77620 disabling SD1 Remote Sense
[timestamp] Setting DDR voltage to 1125mv
[timestamp] Serial Number of Pmic Max77663: 0x2907e2
[timestamp] Entering ramdump check
[timestamp] Get RamDumpCarveOut = 0x0
[timestamp] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
[timestamp] Last reboot was clean, booting normally!
[timestamp] Sdram initialization is successful
[timestamp] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
[timestamp] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
[timestamp] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
[timestamp] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
[timestamp] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
[timestamp] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
[timestamp] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
[timestamp] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
[timestamp] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
[timestamp] Platform-DebugCarveout: 0
[timestamp] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
[timestamp] Non secure mode, and RB not enabled.
[timestamp] Invalid GPT Partition
[timestamp] Using BFS PT to query partitions
[timestamp] failed to load NvTbootTbootCpu from (2:0)
[timestamp] re-load NvTbootTbootCpu from (4:0)
[timestamp] Csd NumOfBlocks=125042688
[timestamp] Using GPT Primary to query partitions
[timestamp] Loading Tboot-CPU binary
[timestamp] Verifying TBC in OdmNonSecureSBK mode
[timestamp] Bootloader load address is 0xa0000000, entry address is 0xa0000258
[timestamp] Bootloader downloaded successfully.
[timestamp] Downloaded Tboot-CPU binary to 0xa0000258
[timestamp] MAX77620_GPIO5 configured
[timestamp] CPU power rail is up
[timestamp] CPU clock enabled
[timestamp] Performing RAM repair
[timestamp] Updating A64 Warmreset Address to 0xa00002e9
[timestamp] Loading NvTbootBootloaderDTB
[timestamp] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode
[timestamp] Bootloader DTB Load Address: 0x83000000
[timestamp] Loading NvTbootKernelDTB
[timestamp] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode
[timestamp] Kernel DTB Load Address: 0x83100000
[timestamp] Loading cboot binary
[timestamp] Verifying EBT in OdmNonSecureSBK mode
[timestamp] Bootloader load address is 0x92c00000, entry address is 0x92c00258
[timestamp] Bootloader downloaded successfully.
[timestamp] Using BFS PT to query partitions
[timestamp] Next binary entry address: 0x92c00258
[timestamp] BoardId: 3448
[timestamp] Overriding pmu board id with proc board id
[timestamp] Display board id is not available
[timestamp] Verifying SC7EntryFw in OdmNonSecureSBK mode
[timestamp] /bpmp deleted
[timestamp] SC7EntryFw header found loaded at 0xff700000
[timestamp] OVR2 PMIC
[timestamp] Bpmp FW successfully loaded
[timestamp] WB0 init successfully at 0xff780000
[timestamp] Set NvDecSticky Bits
[timestamp] GSC2 address ff53fffc value c0edbbcc
[timestamp] GSC MC Settings done
[timestamp] TOS Image length 53680
[timestamp] Monitor size 53680
[timestamp] OS size 0
[timestamp] Secure Os AES-CMAC Verification Success!
[timestamp] TOS image cipher info: plaintext
[timestamp] Loading and Validation of Secure OS Successful
[timestamp] SC7 Entry Firmware - 0xff700000, 0x4000
[timestamp] NvTbootPackSdramParams: start.
[timestamp] NvTbootPackSdramParams: done.
[timestamp] Tegraboot started after 88416 us
[timestamp] Basic modules init took 5716444 us
[timestamp] NvTbootQspiFlashIoctl: Opcode = 1 not supported
[timestamp] Sec Bootdevice Read Time = 12 ms, Read Size = 65 KB
[timestamp] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB
[timestamp] Storage Device Read Time = 6730 ms, Read Size = 2306 KB
[timestamp] Storage Device Write Time = 0 ms, Write Size = 0 KB
[timestamp] Next stage binary read took 1527652 us
[timestamp] Carveout took -1539333 us
[timestamp] CPU initialization took 2040001 us
[timestamp] Total time taken by TegraBoot 7744764 us
[timestamp] Starting CPU & Halting co-processor
64NOTICE: BL31: v1.3(release):eca0c5e
NOTICE: BL31: Built : 00:21:27, Mar 13 2019
ERROR: Error initializing runtime service trusty_fast
[timestamp] RamCode = 0
[timestamp] LPDDR4 Training: Read DT: Number of tables = 2
[timestamp] EMC Training (SRC-freq: 204000; DST-freq: 1600000)
[timestamp] EMC Training Successful
[timestamp] 408000 not found in DVFS table
[timestamp] RamCode = 0
[timestamp] DT Write: emc-table@204000 succeeded
[timestamp] DT Write: emc-table@1600000 succeeded
[timestamp] LPDDR4 Training: Write DT: Number of tables = 2
[timestamp]
[timestamp] Debug Init done
[timestamp] Marked DTB cacheable
[timestamp] Bootloader DTB loaded at 0x83000000
[timestamp] Marked DTB cacheable
[timestamp] Kernel DTB loaded at 0x83100000
[timestamp] DeviceTree Init done
[timestamp] Pinmux applied successfully
[timestamp] gicd_base: 0x50041000
[timestamp] gicc_base: 0x50042000
[timestamp] Interrupts Init done
[timestamp] Using base:0x60005090 & irq:208 for tick-timer
[timestamp] Using base:0x60005098 for delay-timer
[timestamp] platform_init_timer: DONE
[timestamp] Timer(tick) Init done
[timestamp] osc freq = 38400 khz
[timestamp]
[timestamp] welcome to cboot
[timestamp]
[timestamp] Cboot Version: 00.00.2018.01-t210-f76b856b
[timestamp] calling constructors
[timestamp] initializing heap
[timestamp] initializing threads
[timestamp] initializing timers
[timestamp] creating bootstrap completion thread
[timestamp] top of bootstrap2()
[timestamp] CPU: ARM Cortex A57
[timestamp] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
[timestamp] initializing platform
[timestamp] Scratch reg 37 & 271 initial value set..
[timestamp] cboot:secure-pmc present
[timestamp] Manufacturer: MF = 0xc2, ID MSB = 0x25
[timestamp] ID LSB = 0x36, ID-CFI len = 194 bytes
[timestamp] Macronix QSPI chip present
[timestamp] SPI device register
[timestamp] init boot device
[timestamp] allocating memory for boot device(SPI)
[timestamp] registering boot device
[timestamp] sdmmc node status = okay
[timestamp] sdcard instance = 0
[timestamp] sdcard gpio handle 0x5d
[timestamp] sdcard gpio pin 0xc9
[timestamp] sdcard gpio flags 0x0
[timestamp] vmmc-supply 0x9d
[timestamp] Instance: 0
[timestamp] Allocating memory for context
[timestamp] enabling clock
[timestamp] sd card init
[timestamp] Check card present and stable
[timestamp] Send command 0
[timestamp] Send command 3
[timestamp] Set RCA for the card
[timestamp] Query card specific data by command 9
[timestamp] Parse CSD data
[timestamp] Send command 7
[timestamp] Calling sd device register
[timestamp] Init sdcard
[timestamp] Allocating memory for boot device
[timestamp] Registering user device
[timestamp] Enable APE clock
[timestamp] Un-powergate APE partition
[timestamp] of_register: registering tegra_udc to of_hal
[timestamp] of_register: registering tegra_udc to of_hal
[timestamp] of_register: registering inv20628-driver to of_hal
[timestamp] of_register: registering ads1015-driver to of_hal
[timestamp] of_register: registering lp8557-bl-driver to of_hal
[timestamp] of_register: registering bq2419x_charger to of_hal
[timestamp] of_register: registering cpc to of_hal
[timestamp] of_register: registering bq27441_fuel_gauge to of_hal
[timestamp] gpio framework initialized
[timestamp] of_register: registering tca9539_gpio to of_hal
[timestamp] of_register: registering tca9539_gpio to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] pmic framework initialized
[timestamp] of_register: registering max77620_pmic to of_hal
[timestamp] regulator framework initialized
[timestamp] of_register: registering tps65132_bl_driver to of_hal
[timestamp] initializing target
[timestamp] gpio_driver_register: register 'tegra_gpio_driver' driver
[timestamp] fixed regulator driver initialized
[timestamp] initializing OF layer
[timestamp] NCK carveout not present
[timestamp] Skipping dts_overrides
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string maxim,max77620
[timestamp] max77620_init using irq 118
[timestamp] register 'maxim,max77620' pmic
[timestamp] gpio_driver_register: register 'max77620-gpio' driver
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] NCK carveout not present
[timestamp] shim_invoke: No NCT, Calling dts updates
[timestamp] Find /i2c@7000c000's alias i2c0
[timestamp] get eeprom at 1-a0, size 256, type 0
[timestamp] Find /i2c@7000c500's alias i2c2
[timestamp] get eeprom at 3-a0, size 256, type 0
[timestamp] get eeprom at 3-ae, size 256, type 0
[timestamp] pm_ids_update: Updating 1,a0, size 256, type 0
[timestamp] I2C slave not started
[timestamp] I2C write failed
[timestamp] Writing offset failed
[timestamp] eeprom_init: EEPROM read failed
[timestamp] pm_ids_update: eeprom init failed
[timestamp] pm_ids_update: Updating 3,a0, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3448-0000-200
[timestamp] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[timestamp] pm_ids_update: pm id update successful
[timestamp] pm_ids_update: Updating 3,ae, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3449-0000-200
[timestamp] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[timestamp] pm_ids_update: pm id update successful
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
[timestamp] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e3:fd:07
[timestamp] Plugin Manager: Parse ODM data 0x00084000
[timestamp] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] Find /i2c@7000c000's alias i2c0
[timestamp] get eeprom at 1-a0, size 256, type 0
[timestamp] Find /i2c@7000c500's alias i2c2
[timestamp] get eeprom at 3-a0, size 256, type 0
[timestamp] get eeprom at 3-ae, size 256, type 0
[timestamp] pm_ids_update: Updating 1,a0, size 256, type 0
[timestamp] I2C slave not started
[timestamp] I2C write failed
[timestamp] Writing offset failed
[timestamp] eeprom_init: EEPROM read failed
[timestamp] pm_ids_update: eeprom init failed
[timestamp] pm_ids_update: Updating 3,a0, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3448-0000-200
[timestamp] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[timestamp] pm_ids_update: pm id update successful
[timestamp] pm_ids_update: Updating 3,ae, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3449-0000-200
[timestamp] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[timestamp] pm_ids_update: pm id update successful
[timestamp] Chip UID is 000000016441d5c91c0000000e028600
[timestamp] Add serial number:04211190063080008602 as DT property
[timestamp] Applying platform configs
[timestamp] platform-init is not present. Skipping
[timestamp] calling apps_init()
[timestamp] Found 12 GPT partitions in "sd0"
[timestamp] Proceeding to Cold Boot
[timestamp] starting app android_boot_app
[timestamp] Device state: unlocked
[timestamp] display console init
[timestamp] could not find regulator
[timestamp] hdmi cable not connected
[timestamp] is_hdmi_needed: HDMI not connected, returning false
[timestamp] hdmi is not connected
[timestamp] sor0 is not supported
[timestamp] display_console_init: no valid display out_type
[timestamp] subnode volume_up is not found !
[timestamp] subnode back is not found !
[timestamp] subnode volume_down is not found !
[timestamp] subnode menu is not found !
[timestamp] Gpio keyboard init success
[timestamp] found decompressor handler: lz4-legacy
[timestamp] decompressing blob (type 1)...
[timestamp] display_resolution: No display init
[timestamp] Failed to retrieve display resolution
[timestamp] Could not load/initialize BMP blob...ignoring
[timestamp] decompressor handler not found
[timestamp] load_firmware_blob: Firmware blob loaded, entries=2
[timestamp] se_aes_verify_sbk_clear: Error
[timestamp] bl_battery_charging: connected to external power supply
[timestamp] xusb is supported
[timestamp] error while finding nvidia,portmap
[timestamp] could not find regulator
[timestamp] xusb blob version 0 size 126464
[timestamp] firmware size 126464
[timestamp] Firmware timestamp: 0x59fc70d3, Version: 50.20 release
[timestamp] xhci0: 64 bytes context size, 32-bit DMA
[timestamp] usbus0: 5.0Gbps Super Speed USB v3.0
[timestamp] uhub0: <Nvidia XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[timestamp] uhub0: 9 ports with 9 removable, self powered
[timestamp] failed to get HID devices
[timestamp] failed to init xhci or no usb device attached
[timestamp] display_console_ioctl: No display init
[timestamp] switch_backlight failed
[timestamp] device_query_partition_size: failed to open partition sd0:MSC !
[timestamp] MSC Partition not found
[timestamp] device_query_partition_size: failed to open partition sd0:USP !
[timestamp] USP partition read failed!
[timestamp] blob_init: blob-partition USP header read failed
[timestamp] android_boot Unable to update recovery partition
[timestamp] kfs_getpartname: name = LNX
[timestamp] Loading kernel from LNX
[timestamp] Verifying boot image in OdmNonSecureSBK mode
[timestamp] kernel load address: 0x80080000, size: 476960 bytes
[timestamp] ramdisk load address: 0x84100000, size: 0 bytes
[timestamp] load kernel from storage
[timestamp] decompressor handler not found
[timestamp] Successfully loaded kernel and ramdisk images
[timestamp] display_resolution: No display init
[timestamp] Failed to retrieve display resolution
[timestamp] bmp blob is not loaded and initialized
[timestamp] Failed to display boot-logo
[timestamp] NCK carveout not present
[timestamp] Skipping dts_overrides
[timestamp] NCK carveout not present
[timestamp] shim_invoke: No NCT, Calling dts updates
[timestamp] Find /i2c@7000c000's alias i2c0
[timestamp] get eeprom at 1-a0, size 256, type 0
[timestamp] Find /i2c@7000c500's alias i2c2
[timestamp] get eeprom at 3-a0, size 256, type 0
[timestamp] get eeprom at 3-ae, size 256, type 0
[timestamp] pm_ids_update: Updating 1,a0, size 256, type 0
[timestamp] I2C slave not started
[timestamp] I2C write failed
[timestamp] Writing offset failed
[timestamp] eeprom_init: EEPROM read failed
[timestamp] pm_ids_update: eeprom init failed
[timestamp] pm_ids_update: Updating 3,a0, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3448-0000-200
[timestamp] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[timestamp] pm_ids_update: pm id update successful
[timestamp] pm_ids_update: Updating 3,ae, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3449-0000-200
[timestamp] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[timestamp] pm_ids_update: pm id update successful
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
[timestamp] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e3:fd:07
[timestamp] Plugin Manager: Parse ODM data 0x00084000
[timestamp] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] Add serial number:04211190063080008602 as DT property
[timestamp] "bpmp" doesn't exist, creating
[timestamp] Updated bpmp info to DTB
[timestamp] Updated initrd info to DTB
[timestamp] "proc-board" doesn't exist, creating
[timestamp] Updated board info to DTB
[timestamp] "pmu-board" doesn't exist, creating
[timestamp] Updated board info to DTB
[timestamp] "display-board" doesn't exist, creating
[timestamp] Updated board info to DTB
[timestamp] "reset" doesn't exist, creating
[timestamp] Updated reset info to DTB
[timestamp] display_console_ioctl: No display init
[timestamp] display_console_ioctl: No display init
[timestamp] display_console_ioctl: No display init
[timestamp] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000
[timestamp] DTB cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] Updated bootarg info to DTB
[timestamp] Adding uuid 000000016441d5c91c0000000e028600 to DT
[timestamp] device_query_partition_size: failed to open partition sd0:RP6 !
[timestamp] RP6 partition read failed!
[timestamp] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7
[timestamp] Updated memory info to DTB
[timestamp] Updated system-lp0-disable info to DTB
[timestamp] set vdd_core voltage to 1075 mv
[timestamp] setting 'vdd-core' regulator to 1075000 micro volts
[timestamp] could not find regulator
[timestamp] Found secure-pmc; disable BPMP
U-Boot 2016.07-g541e96c (May 31 2019 - 15:44:14 -0700)
TEGRA210
Model: NVIDIA P3450-Porg
Board: NVIDIA P3450-PORG
DRAM: 4 GiB
MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 2  1  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
663 bytes read in 123 ms (4.9 KiB/s)
p3450-porg eMMC boot options
1: primary kernel
Enter choice: 1: primary kernel
Retrieving file: /boot/initrd
0 bytes read in 94 ms (0 Bytes/s)
Retrieving file: /boot/Image
34048008 bytes read in 1533 ms (21.2 MiB/s)
append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/nfs ip=dhcp nfsroot=10.42.0.1:/srv/nfs/instances/00000,v3 rw rootwait
## Flattened Device Tree blob at 83100000
Booting using the fdt blob at 0x83100000
reserving fdt memory region: addr=80000000 size=20000
Using Device Tree in place at 0000000083100000, end 0000000083173e9a
Starting kernel ...
<hit enter to activate fiq debugger>
[timestamp] Booting Linux on physical CPU 0x0
[timestamp] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019
[timestamp] Boot CPU: AArch64 Processor [411fd071]
[timestamp] OF: fdt:memory scan node memory@80000000, reg size 48,
[timestamp] OF: fdt: - 80000000 , 7ee00000
[timestamp] OF: fdt: - 100000000 , 7f200000
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[timestamp] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
[timestamp] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[timestamp] cma: Reserved 64 MiB at 0x00000000fac00000
[timestamp] psci: probing for conduit method from DT.
[timestamp] psci: PSCIv1.0 detected in firmware.
[timestamp] psci: Using standard PSCI v0.2 function IDs
[timestamp] psci: MIGRATE_INFO_TYPE not supported.
[timestamp] psci: SMC Calling Convention v1.1
[timestamp] percpu: Embedded 23 pages/cpu @ffffffc0fefd2000 s53400 r8192 d32616 u94208
[timestamp] CPU features: enabling workaround for ARM erratum 832075
[timestamp] Speculative Store Bypass Disable mitigation not required
[timestamp] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
[timestamp] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/nfs ip=dhcp nfsroot=10.42.0.1:/srv/nfs/instances/00000,v3 rw rootwait
[timestamp] log_buf_len individual max cpu contribution: 32768 bytes
[timestamp] log_buf_len total cpu_extra contributions: 98304 bytes
[timestamp] log_buf_len min size: 32768 bytes
[timestamp] log_buf_len: 131072 bytes
[timestamp] early log buf free: 29460(89%)
[timestamp] PID hash table entries: 4096 (order: 3, 32768 bytes)
[timestamp] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[timestamp] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[timestamp] Memory: 3576064K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 108288K reserved, 475136K cma-reserved)
[timestamp] Virtual kernel memory layout:
[timestamp] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[timestamp] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[timestamp] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB)
[timestamp] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB)
[timestamp] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB)
[timestamp] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB)
[timestamp] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB)
[timestamp] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[timestamp] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[timestamp] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[timestamp] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
[timestamp] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
[timestamp] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[timestamp] Preemptible hierarchical RCU implementation.
[timestamp] Build-time adjustment of leaf fanout to 64.
[timestamp] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[timestamp] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[timestamp] NR_IRQS:64 nr_irqs:64 0
[timestamp] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[timestamp] t210 clock and reset probe
[timestamp] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[timestamp] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[timestamp] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[timestamp] Console: colour dummy device 80x25
[timestamp] console [tty0] enabled
[timestamp] kmemleak: Kernel memory leak detector disabled
[timestamp] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[timestamp] pid_max: default: 32768 minimum: 301
[timestamp] Security Framework initialized
[timestamp] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[timestamp] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[timestamp] ftrace: allocating 46802 entries in 183 pages
[timestamp] ASID allocator initialised with 65536 entries
[timestamp] tegra-id: chipid=22117.
[timestamp] tegra-id: opt_subrevision=0.
[timestamp] Tegra Speedo/IDDQ fuse revision 4
[timestamp] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[timestamp] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0
[timestamp] Tegra: CPU Speedo Value 2087, SoC Speedo Value 1967, GPU Speedo Value 2083
[timestamp] Tegra: CPU IDDQ Value 2464, SoC IDDQ Value 2692, GPU IDDQ Value 3280
[timestamp] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1
[timestamp] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[timestamp] DTB Build time: Mar 15 2019 09:52:07
[timestamp] CPU1: Booted secondary processor [411fd071]
[timestamp] CPU2: Booted secondary processor [411fd071]
[timestamp] CPU3: Booted secondary processor [411fd071]
[timestamp] Brought up 4 CPUs
[timestamp] SMP: Total of 4 processors activated.
[timestamp] CPU features: detected feature: 32-bit EL0 Support
[timestamp] CPU: All CPU(s) started at EL2
[timestamp] alternatives: patching kernel code
[timestamp] devtmpfs: initialized
[timestamp] Initilizing CustomIPI irq domain
[timestamp] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[timestamp] futex hash table entries: 1024 (order: 4, 65536 bytes)
[timestamp] pinctrl core: initialized pinctrl subsystem
[timestamp] OS set in device tree is not L4T.
[timestamp] regulator-dummy: no parameters
[timestamp] Initializing plugin-manager
[timestamp] Plugin module not found
[timestamp] node /plugin-manager/fragement@0 match with board >=3448-0000-100
[timestamp] node /plugin-manager/fragment@1 match with board >=3448-0000-101
[timestamp] node /plugin-manager/fragment@5 match with board 3449-0000-200
[timestamp] NET: Registered protocol family 16
[timestamp] pstore: using zlib compression
[timestamp] console [pstore-1] enabled
[timestamp] pstore: Registered ramoops as persistent store backend
[timestamp] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[timestamp] cpuidle: using governor menu
[timestamp] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[timestamp] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000)
[timestamp] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[timestamp] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[timestamp] tegra_bpmp_of_clk_init: EMC proxy not found.
[timestamp] tegra_powergate_init: DONE
[timestamp] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[timestamp] DTB Build time: Mar 15 2019 09:52:07
[timestamp] Tegra reboot handler registered.
[timestamp] iommu: Adding device tegra-carveouts to group 0
[timestamp] platform tegra-carveouts: domain=ffffffc0f9400318 allocates as[0]=ffffffc0f9bf80a8
[timestamp] iommu: Adding device smmu_test to group 1
[timestamp] platform smmu_test: domain=ffffffc0f9400558 allocates as[0]=ffffffc0f9bf8110
[timestamp] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
[timestamp] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
[timestamp] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
[timestamp] nv-tegra-mc 70019000.mc: No mssnvlink node
[timestamp] mc-err: mcerr ops are set to t21x
[timestamp] iommu: Adding device 70090000.xusb to group 2
[timestamp] iommu: Adding device 70006000.serial to group 3
[timestamp] platform 70006000.serial: domain=ffffffc0f9482618 allocates as[0]=ffffffc0f9bf8178
[timestamp] iommu: Adding device 70006040.serial to group 4
[timestamp] iommu: Adding device 70006200.serial to group 5
[timestamp] iommu: Adding device sound to group 6
[timestamp] platform sound: domain=ffffffc0f9482b58 allocates as[0]=ffffffc0f9bf81e0
[timestamp] iommu: Adding device 7000d400.spi to group 7
[timestamp] iommu: Adding device 7000d600.spi to group 8
[timestamp] iommu: Adding device 70410000.spi to group 9
[timestamp] iommu: Adding device 50000000.host1x to group 10
[timestamp] iommu: Adding device 54080000.vi to group 11
[timestamp] iommu: Adding device 54600000.isp to group 12
[timestamp] iommu: Adding device 54680000.isp to group 13
[timestamp] iommu: Adding device tegradc.0 to group 14
[timestamp] platform tegradc.0: domain=ffffffc0f948fa98 allocates as[0]=ffffffc0f9bf8248
[timestamp] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[timestamp] iommu: Adding device tegradc.1 to group 15
[timestamp] platform tegradc.1: domain=ffffffc0f948fcd8 allocates as[0]=ffffffc0f9bf82b0
[timestamp] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[timestamp] iommu: Adding device 54340000.vic to group 16
[timestamp] iommu: Adding device 544c0000.nvenc to group 17
[timestamp] iommu: Adding device 54500000.tsec to group 18
[timestamp] iommu: Adding device 54100000.tsecb to group 19
[timestamp] iommu: Adding device 54480000.nvdec to group 20
[timestamp] iommu: Adding device 54380000.nvjpg to group 21
[timestamp] iommu: Adding device 546c0000.i2c to group 22
[timestamp] iommu: Adding device 57000000.gpu to group 23
[timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 allocates as[0]=ffffffc0f9bf8318
[timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 allocates as[1]=ffffffc0f9bf8380
[timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 allocates as[2]=ffffffc0f9bf83e8
[timestamp] platform 57000000.gpu: domain=ffffffc0f949acd8 allocates as[3]=ffffffc0f9bf8450
[timestamp] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[timestamp] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[timestamp] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
[timestamp] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[timestamp] tegra-pmc: ### PMC reset status reg: 0x3
[timestamp] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[timestamp] tegra-pmc: Clear bootloader IO dpd settings
[timestamp] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[timestamp] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[timestamp] iommu: Adding device 70012000.se to group 24
[timestamp] iommu: Adding device 7000c000.i2c to group 25
[timestamp] iommu: Adding device 7000c400.i2c to group 26
[timestamp] iommu: Adding device 7000c500.i2c to group 27
[timestamp] iommu: Adding device 7000c700.i2c to group 28
[timestamp] iommu: Adding device 7000d000.i2c to group 29
[timestamp] iommu: Adding device 7000d100.i2c to group 30
[timestamp] iommu: Adding device sdhci-tegra.0 to group 31
[timestamp] platform sdhci-tegra.0: domain=ffffffc0f9550e58 allocates as[0]=ffffffc0f9bf84b8
[timestamp] iommu: Adding device 700d0000.xudc to group 32
[timestamp] vdd-ac-bat: 5000 mV
[timestamp] vdd-5v0-sys: 5000 mV
[timestamp] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[timestamp] vdd-5v0-hdmi: 5000 mV
[timestamp] vdd-1v8: 1800 mV
[timestamp] vdd-fan: supplied by vdd-5v0-sys
[timestamp] vdd-fan: 5000 mV
[timestamp] vdd-usb-vbus: supplied by vdd-5v0-sys
[timestamp] vdd-usb-vbus: 5000 mV
[timestamp] vdd-usb-vbus2: 5000 mV
[timestamp] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[timestamp] GPIO line 151 (camera-control-output-low) hogged as output/low
[timestamp] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
[timestamp] eventlib_kernel: keventlib is initialized, test id: 0
[timestamp] SCSI subsystem initialized
[timestamp] usbcore: registered new interface driver usbfs
[timestamp] usbcore: registered new interface driver hub
[timestamp] usbcore: registered new device driver usb
[timestamp] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[timestamp] random: fast init done
[timestamp] vdd-core: 600 <--> 1162 mV at 1075 mV
[timestamp] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[timestamp] vdd-ddr-1v1: 1150 mV
[timestamp] vdd-pre-reg-1v35: 1350 mV
[timestamp] vdd-1v8: 1800 mV
[timestamp] vdd-1v8: Failed to create debugfs directory
[timestamp] avdd-sys-1v2: 1200 mV
[timestamp] vdd-pex-1v0: 1050 mV
[timestamp] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
[timestamp] max77620-ldo3: at 3100 mV
[timestamp] vdd-rtc: 850 <--> 1100 mV at 1000 mV
[timestamp] max77620-ldo5: at 3100 mV
[timestamp] max77620-ldo6: at 2800 mV
[timestamp] avdd-1v05-pll: 1050 mV
[timestamp] avdd-io-hdmi-dp: 1050 mV
[timestamp] GPIO line 505 (spmic-default-output-high) hogged as output/high
[timestamp] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
[timestamp] max77620 4-003c: max77620 probe successful
[timestamp] i2c i2c-6: Unbalanced pm_runtime_enable!
[timestamp] media: Linux media interface: v0.10
[timestamp] Linux video capture interface: v2.00
[timestamp] pps_core: LinuxPPS API ver. 1 registered
[timestamp] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[timestamp] PTP clock support registered
[timestamp] tegra_fiq_debugger_init: found FIQ source (IRQ 98)
[timestamp] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
[timestamp] Advanced Linux Sound Architecture Driver Initialized.
[timestamp] Bluetooth: Core ver 2.22
[timestamp] NET: Registered protocol family 31
[timestamp] Bluetooth: HCI device and connection manager initialized
[timestamp] Bluetooth: HCI socket layer initialized
[timestamp] Bluetooth: L2CAP socket layer initialized
[timestamp] Bluetooth: SCO socket layer initialized
[timestamp] tegra210_dvfs: no clock found for sdmmc2_ddr
[timestamp] tegra210_dvfs: no clock found for sdmmc4_ddr
[timestamp] tegra210_dvfs: no clock found for sdmmc1_ddr
[timestamp] tegra210_dvfs: no clock found for sdmmc3_ddr
[timestamp] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[timestamp] vdd-3v3-sys: supplied by vdd-5v0-sys
[timestamp] vdd-3v3-sys: 3300 mV
[timestamp] vdd-1v8: supplied by vdd-3v3-sys
[timestamp] vdd-usb-vbus2: supplied by vdd-3v3-sys
[timestamp] vdd-3v3-sd: supplied by vdd-3v3-sys
[timestamp] vdd-3v3-sd: 3300 mV
[timestamp] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[timestamp] avdd-io-edp-1v05: 1050 mV
[timestamp] vdd-usb-hub-en: supplied by vdd-1v8
[timestamp] vdd-usb-hub-en: 5000 mV
[timestamp] camchar: rtcpu character device driver loaded
[timestamp] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
[timestamp] clocksource: Switched to clocksource arch_sys_counter
[timestamp] VFS: Disk quotas dquot_6.6.0
[timestamp] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[timestamp] nvmap_heap_init: nvmap_heap_init: created heap block cache
[timestamp] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
[timestamp] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
[timestamp] cma: enabled page replacement for spfn=d7000, epfn=f0000
[timestamp] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[timestamp] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[timestamp] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[timestamp] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[timestamp] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[timestamp] nvmap_page_pool_init: Total RAM pages: 1012800
[timestamp] nvmap_page_pool_init: nvmap page pool size: 126600 pages (494 MB)
[timestamp] nvmap_background_zero_thread: PP zeroing thread starting.
[timestamp] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[timestamp] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
[timestamp] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[timestamp] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[timestamp] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[timestamp] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[timestamp] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[timestamp] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[timestamp] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB
[timestamp] NET: Registered protocol family 2
[timestamp] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[timestamp] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[timestamp] TCP: Hash tables configured (established 32768 bind 32768)
[timestamp] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[timestamp] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[timestamp] NET: Registered protocol family 1
[timestamp] RPC: Registered named UNIX socket transport module.
[timestamp] RPC: Registered udp transport module.
[timestamp] RPC: Registered tcp transport module.
[timestamp] RPC: Registered tcp NFSv4.1 backchannel transport module.
[timestamp] Trying to unpack rootfs image as initramfs...
[timestamp] host1x 50000000.host1x: initialized
[timestamp] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[timestamp] audit: initializing netlink subsys (disabled)
[timestamp] audit: type=2000 audit(0.551:1): initialized
[timestamp] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[timestamp] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[timestamp] ntfs: driver 2.1.32 [Flags: R/W].
[timestamp] 9p: Installing v9fs 9p2000 file system support
[timestamp] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[timestamp] io scheduler noop registered
[timestamp] io scheduler cfq registered (default)
[timestamp] gic 702f9000.agic: GIC IRQ controller registered
[timestamp] iommu: Adding device 702ef000.adsp to group 33
[timestamp] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[timestamp] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x9229413
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
[timestamp] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[timestamp] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[timestamp] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
[timestamp] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[timestamp] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes
[timestamp] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[timestamp] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000
[timestamp] Adding domain tsec-pd to PM domain host1x-pd
[timestamp] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
[timestamp] tsec 54500000.tsec: initialized
[timestamp] tsec 54100000.tsecb: initialized
[timestamp] Adding domain nvdec-pd to PM domain host1x-pd
[timestamp] nvdec 54480000.nvdec: initialized
[timestamp] Adding domain vic03-pd to PM domain host1x-pd
[timestamp] Adding domain msenc-pd to PM domain host1x-pd
[timestamp] Adding domain nvjpg-pd to PM domain host1x-pd
[timestamp] falcon 54340000.vic: initialized
[timestamp] falcon 544c0000.nvenc: initialized
[timestamp] falcon 54380000.nvjpg: initialized
[timestamp] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[timestamp] display board info: id 0x0, fab 0x0
[timestamp] generic_infoframe_type: 0x87
[timestamp] tegradc tegradc.0: DT parsed successfully
[timestamp] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
[timestamp] tegradc tegradc.0: probed
[timestamp] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[timestamp] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels
[timestamp] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[timestamp] kfuse 7000fc00.kfuse: initialized
[timestamp] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
[timestamp] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[timestamp] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[timestamp] vdd-cpu: 708 <--> 1322 mV at 708 mV
[timestamp] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[timestamp] vdd-gpu: applied init 1000000uV constraint
[timestamp] vdd-gpu: 708 <--> 1323 mV at 997 mV
[timestamp] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[timestamp] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[timestamp] No Device Node present for smmu client: serial8250 !!
[timestamp] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[timestamp] iommu: Adding device serial8250 to group 35
[timestamp] console [ttyS0] disabled
[timestamp] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
[timestamp] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
[timestamp] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[timestamp] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[timestamp] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[timestamp] pci_bus 0000:00: root bus resource [bus 00-ff]
[timestamp] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[timestamp] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[timestamp] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[timestamp] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
[timestamp] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
[timestamp] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[timestamp] pci 0000:00:02.0: PCI bridge to [bus 01]
[timestamp] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[timestamp] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
[timestamp] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[timestamp] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[timestamp] console [ttyS0] enabled
[timestamp] Console: switching to colour frame buffer device 80x30
[timestamp] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
[timestamp] serial-tegra 70006200.serial: RX in PIO mode
[timestamp] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
[timestamp] [drm] Initialized
[timestamp] brd: module loaded
[timestamp] tegradc tegradc.0: fb registered
[timestamp] loop: module loaded
[timestamp] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
[timestamp] tegradc tegradc.1: No lt-data, using default setting
[timestamp] tegradc tegradc.1: No hpd-gpio in DT
[timestamp] tegradc tegradc.1: DT parsed successfully
[timestamp] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1
[timestamp] tegradc tegradc.1: dpd enable lookup fail:-19
[timestamp] tegradc tegradc.1: probed
[timestamp] Host read timeout at address 545c00c4
[timestamp] tegradc tegradc.1: fb registered
[timestamp] tegra_profiler: version: 1.132, samples/io: 46/26
[timestamp] tegra_profiler: auth: init
[timestamp] THERMAL EST: found 2 subdevs
[timestamp] THERMAL EST num_resources: 0
[timestamp] [THERMAL EST subdev 0]
[timestamp] [THERMAL EST subdev 1]
[timestamp] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
[timestamp] THERMAL EST: thz register success.
[timestamp] THERMAL EST: end of probe, return err: 0
[timestamp] hisi_sas: driver version v1.6
[timestamp] tegra-qspi 70410000.spi: Prod settings list not found
[timestamp] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
[timestamp] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
[timestamp] libphy: Fixed MDIO Bus: probed
[timestamp] tun: Universal TUN/TAP device driver, 1.6
[timestamp] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[timestamp] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[timestamp] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[timestamp] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[timestamp] igb: Copyright (c) 2007-2014 Intel Corporation.
[timestamp] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[timestamp] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[timestamp] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
[timestamp] Copyright(c) 1999 - 2017 Intel Corporation.
[timestamp] r8168 0000:01:00.0: enabling device (0000 -> 0003)
[timestamp] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[timestamp] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
[timestamp] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e3:fd:07 from device tree
[timestamp] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[timestamp] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
[timestamp] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[timestamp] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[timestamp] PPP generic driver version 2.4.2
[timestamp] PPP BSD Compression module registered
[timestamp] PPP Deflate Compression module registered
[timestamp] PPP MPPE Compression module registered
[timestamp] NET: Registered protocol family 24
[timestamp] usbcore: registered new interface driver r8152
[timestamp] usbcore: registered new interface driver asix
[timestamp] usbcore: registered new interface driver ax88179_178a
[timestamp] usbcore: registered new interface driver cdc_ether
[timestamp] usbcore: registered new interface driver net1080
[timestamp] usbcore: registered new interface driver cdc_subset
[timestamp] usbcore: registered new interface driver zaurus
[timestamp] usbcore: registered new interface driver cdc_ncm
[timestamp] VFIO - User Level meta-driver version: 0.3
[timestamp] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[timestamp] ehci-pci: EHCI PCI platform driver
[timestamp] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[timestamp] ohci-pci: OHCI PCI platform driver
[timestamp] ohci-platform: OHCI generic platform driver
[timestamp] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[timestamp] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9085000 id
[timestamp] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
[timestamp] tegra-xusb 70090000.xusb: Falling back to user helper
[timestamp] usbcore: registered new interface driver uas
[timestamp] usbcore: registered new interface driver usb-storage
[timestamp] usbcore: registered new interface driver usbserial
[timestamp] tegra-xudc-new 700d0000.xudc: device count: 1
[timestamp] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[timestamp] tegra-xudc-new 700d0000.xudc: vbus state: 1
[timestamp] tegra-xudc-new 700d0000.xudc: device mode on: 0
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
[timestamp] tegra-xudc-new 700d0000.xudc: active: 0 => 1
[timestamp] mousedev: PS/2 mouse device common for all mice
[timestamp] usbcore: registered new interface driver xpad
[timestamp] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[timestamp] rtc rtc1: alarm rtc device
[timestamp] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[timestamp] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[timestamp] i2c /dev entries driver
[timestamp] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6
[timestamp] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[timestamp] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
[timestamp] imx219 6-0010: board setup failed
[timestamp] imx219: probe of 6-0010 failed with error -121
[timestamp] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[timestamp] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[timestamp] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[timestamp] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[timestamp] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[timestamp] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[timestamp] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[timestamp] tegra_aotag tegra-aotag: Registering sensor 0
[timestamp] tegra_aotag tegra-aotag: Invalid temp readout
[timestamp] tegra_aotag tegra-aotag: Invalid temp readout
[timestamp] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[timestamp] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
[timestamp] tegra_aotag tegra-aotag: Invalid temp readout
[timestamp] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
[timestamp] parse_throttle_dt_data: Num cap clks = 6
[timestamp] parse_throttle_dt_data: clk=cclk_g type=2
[timestamp] parse_throttle_dt_data: clk=gpu type=4
[timestamp] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[timestamp] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[timestamp] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[timestamp] parse_throttle_dt_data: clk=emc type=3
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_throttle_probe: probe successful. #cdevs=4
[timestamp] FAN dev name: pwm-fan
[timestamp] FAN:gpio request success.
[timestamp] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[timestamp] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[timestamp] pwm_fan_driver pwm-fan: fan tach request irq success
[timestamp] pwm_fan_driver pwm-fan: tach period: 1000
[timestamp] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[timestamp] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[timestamp] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[timestamp] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[timestamp] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[timestamp] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[timestamp] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[timestamp] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[timestamp] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[timestamp] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[timestamp] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
[timestamp] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
[timestamp] device-mapper: uevent: version 1.0.3
[timestamp] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[timestamp] tegra210-cpufreq cpufreq: probe()...completed
[timestamp] sdhci: Secure Digital Host Controller Interface driver
[timestamp] sdhci: Copyright(c) Pierre Ossman
[timestamp] sdhci-pltfm: SDHCI platform and OF driver helper
[timestamp] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[timestamp] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[timestamp] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
[timestamp] tegra-se 70012000.se: tegra_se_probe: complete
[timestamp] hidraw: raw HID events driver (C) Jiri Kosina
[timestamp] usbcore: registered new interface driver usbhid
[timestamp] usbhid: USB HID core driver
[timestamp] tegra21x_actmon 6000c800.actmon: in actmon_register()...
[timestamp] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[timestamp] nvpmodel: initialized successfully
[timestamp] usbcore: registered new interface driver snd-usb-audio
[timestamp] No Device Node present for smmu client: snd-soc-dummy !!
[timestamp] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[timestamp] iommu: Adding device snd-soc-dummy to group 36
[timestamp] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[timestamp] OPE platform probe
[timestamp] OPE platform probe successful
[timestamp] OPE platform probe
[timestamp] OPE platform probe successful
[timestamp] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[timestamp] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[timestamp] u32 classifier
[timestamp] Actions configured
[timestamp] Initializing XFRM netlink socket
[timestamp] NET: Registered protocol family 10
[timestamp] NET: Registered protocol family 17
[timestamp] NET: Registered protocol family 15
[timestamp] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[timestamp] Bluetooth: RFCOMM socket layer initialized
[timestamp] Bluetooth: RFCOMM ver 1.11
[timestamp] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[timestamp] Bluetooth: HIDP socket layer initialized
[timestamp] 9pnet: Installing 9P2000 support
[timestamp] Key type dns_resolver registered
[timestamp] Registered cp15_barrier emulation handler
[timestamp] Registered setend emulation handler
[timestamp] registered taskstats version 1
[timestamp] Adding domain ve2-pd to PM domain host1x-pd
[timestamp] Adding domain ve-pd to PM domain host1x-pd
[timestamp] mmc0: hw tuning done ...
[timestamp] mmc0: new ultra high speed SDR104 SDXC card at address 0001
[timestamp] mmcblk0: mmc0:0001 GC2QT 59.6 GiB
[timestamp] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[timestamp] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[timestamp] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
[timestamp] isp 54600000.isp: initialized
[timestamp] isp 54680000.isp: initialized
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] tegra_dvfs: GPU-cap: registered
[timestamp] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
[timestamp] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled
[timestamp] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled
[timestamp] tegra_dvfs: vdd-gpu-vts: registered
[timestamp] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
[timestamp] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
[timestamp] input: gpio-keys as /devices/gpio-keys/input/input1
[timestamp] tegra_rtc 7000e000.rtc: setting system clock to 2019-07-31 19:50:11 UTC (1564602611)
[timestamp] vi 54080000.vi: vi_probe: ++
[timestamp] vi 54080000.vi: initialized
[timestamp] vi 54080000.vi: subdev nvcsi--1 bound
[timestamp] mmcblk mmc0:0001: Card claimed for testing.
[timestamp] Disable partitions left on by BL
[timestamp] disb
[timestamp] bwmgr: missing cdev-type property
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] DRAM derating cdev registered.
[timestamp] eth0: 0xffffff800a35e000, 00:04:4b:e3:fd:07, IRQ 404
[timestamp] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[timestamp] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
[timestamp] tegradc tegradc.1: blank - powerdown
[timestamp] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
[timestamp] Extcon DP: HPD disabled
[timestamp] hpd: hpd_switch 0
[timestamp] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[timestamp] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
[timestamp] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
[timestamp] r8168: eth0: link up
[timestamp] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[timestamp] Sending DHCP requests ., OK
[timestamp] IP-Config: Got DHCP answer from 10.42.0.1, my address is 10.42.0.55
[timestamp] IP-Config: Complete:
[timestamp] device=eth0, hwaddr=00:04:4b:e3:fd:07, ipaddr=10.42.0.55, mask=255.255.255.0, gw=10.42.0.1
[timestamp] host=10.42.0.55, domain=, nis-domain=(none)
[timestamp] bootserver=10.42.0.1, rootserver=10.42.0.1, rootpath= nameserver0=10.42.0.1
[timestamp] vdd-1v8: disabling
[timestamp] vdd-fan: disabling
[timestamp] vdd-usb-vbus: disabling
[timestamp] vdd-usb-vbus2: disabling
[timestamp] avdd-io-edp-1v05: disabling
[timestamp] vdd-usb-hub-en: disabling
[timestamp] ALSA device list:
[timestamp] #0: tegra-hda at 0x70038000 irq 83
[timestamp] #1: tegra-snd-t210ref-mobile-rt565x
[timestamp] VFS: Mounted root (nfs filesystem) on device 0:17.
[timestamp] devtmpfs: mounted
[timestamp] Freeing unused kernel memory: 8512K
[timestamp] ip_tables: (C) 2000-2006 Netfilter Core Team
[timestamp] cgroup: cgroup2: unknown option "nsdelegate"
[timestamp] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[timestamp] systemd[1]: Detected architecture arm64.
[timestamp] systemd[1]: Set hostname to <nano-dathon>.
[timestamp] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[timestamp] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[timestamp] random: crng init done
[timestamp] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[timestamp] systemd[1]: Reached target User and Group Name Lookups.
[timestamp] systemd[1]: Created slice System Slice.
[timestamp] systemd[1]: Listening on Journal Socket.
[timestamp] systemd[1]: Mounting POSIX Message Queue File System...
[timestamp] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[timestamp] systemd-journald[1940]: Received request to flush runtime journal from PID 1
[timestamp] using random self ethernet address
[timestamp] using random host ethernet address
[timestamp] using random self ethernet address
[timestamp] using random host ethernet address
[timestamp] nfs: server 10.42.0.1 not responding, still trying
[timestamp] nfs: server 10.42.0.1 not responding, still trying
[timestamp] nfs: server 10.42.0.1 not responding, still trying
Raw
nano__serial-output_success
[timestamp] [TegraBoot] (version 00.00.2018.01-l4t-33e7fa82)
[timestamp] Processing in cold boot mode Bootloader 2
[timestamp] A02 Bootrom Patch rev = 1023
[timestamp] Power-up reason: pmc por
[timestamp] No Battery Present
[timestamp] pmic max77620 reset reason
[timestamp] pmic max77620 NVERC : 0x40
[timestamp] RamCode = 0
[timestamp] Platform has DDR4 type RAM
[timestamp] max77620 disabling SD1 Remote Sense
[timestamp] Setting DDR voltage to 1125mv
[timestamp] Serial Number of Pmic Max77663: 0x2907e2
[timestamp] Entering ramdump check
[timestamp] Get RamDumpCarveOut = 0x0
[timestamp] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
[timestamp] Last reboot was clean, booting normally!
[timestamp] Sdram initialization is successful
[timestamp] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
[timestamp] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
[timestamp] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
[timestamp] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
[timestamp] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
[timestamp] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
[timestamp] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
[timestamp] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
[timestamp] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
[timestamp] Platform-DebugCarveout: 0
[timestamp] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
[timestamp] Non secure mode, and RB not enabled.
[timestamp] Invalid GPT Partition
[timestamp] Using BFS PT to query partitions
[timestamp] failed to load NvTbootTbootCpu from (2:0)
[timestamp] re-load NvTbootTbootCpu from (4:0)
[timestamp] Csd NumOfBlocks=125042688
[timestamp] Using GPT Primary to query partitions
[timestamp] Loading Tboot-CPU binary
[timestamp] Verifying TBC in OdmNonSecureSBK mode
[timestamp] Bootloader load address is 0xa0000000, entry address is 0xa0000258
[timestamp] Bootloader downloaded successfully.
[timestamp] Downloaded Tboot-CPU binary to 0xa0000258
[timestamp] MAX77620_GPIO5 configured
[timestamp] CPU power rail is up
[timestamp] CPU clock enabled
[timestamp] Performing RAM repair
[timestamp] Updating A64 Warmreset Address to 0xa00002e9
[timestamp] Loading NvTbootBootloaderDTB
[timestamp] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode
[timestamp] Bootloader DTB Load Address: 0x83000000
[timestamp] Loading NvTbootKernelDTB
[timestamp] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode
[timestamp] Kernel DTB Load Address: 0x83100000
[timestamp] Loading cboot binary
[timestamp] Verifying EBT in OdmNonSecureSBK mode
[timestamp] Bootloader load address is 0x92c00000, entry address is 0x92c00258
[timestamp] Bootloader downloaded successfully.
[timestamp] Using BFS PT to query partitions
[timestamp] Next binary entry address: 0x92c00258
[timestamp] BoardId: 3448
[timestamp] Overriding pmu board id with proc board id
[timestamp] Display board id is not available
[timestamp] Verifying SC7EntryFw in OdmNonSecureSBK mode
[timestamp] /bpmp deleted
[timestamp] SC7EntryFw header found loaded at 0xff700000
[timestamp] OVR2 PMIC
[timestamp] Bpmp FW successfully loaded
[timestamp] WB0 init successfully at 0xff780000
[timestamp] Set NvDecSticky Bits
[timestamp] GSC2 address ff53fffc value c0edbbcc
[timestamp] GSC MC Settings done
[timestamp] TOS Image length 53680
[timestamp] Monitor size 53680
[timestamp] OS size 0
[timestamp] Secure Os AES-CMAC Verification Success!
[timestamp] TOS image cipher info: plaintext
[timestamp] Loading and Validation of Secure OS Successful
[timestamp] SC7 Entry Firmware - 0xff700000, 0x4000
[timestamp] NvTbootPackSdramParams: start.
[timestamp] NvTbootPackSdramParams: done.
[timestamp] Tegraboot started after 53279 us
[timestamp] Basic modules init took 5711671 us
[timestamp] NvTbootQspiFlashIoctl: Opcode = 1 not supported
[timestamp] Sec Bootdevice Read Time = 12 ms, Read Size = 65 KB
[timestamp] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB
[timestamp] Storage Device Read Time = 6730 ms, Read Size = 2306 KB
[timestamp] Storage Device Write Time = 0 ms, Write Size = 0 KB
[timestamp] Next stage binary read took 1527653 us
[timestamp] Carveout took -1539335 us
[timestamp] CPU initialization took 2039997 us
[timestamp] Total time taken by TegraBoot 7739986 us
[timestamp] Starting CPU & Halting co-processor
64NOTICE: BL31: v1.3(release):eca0c5e
NOTICE: BL31: Built : 00:21:27, Mar 13 2019
ERROR: Error initializing runtime service trusty_fast
[timestamp] RamCode = 0
[timestamp] LPDDR4 Training: Read DT: Number of tables = 2
[timestamp] EMC Training (SRC-freq: 204000; DST-freq: 1600000)
[timestamp] EMC Training Successful
[timestamp] 408000 not found in DVFS table
[timestamp] RamCode = 0
[timestamp] DT Write: emc-table@204000 succeeded
[timestamp] DT Write: emc-table@1600000 succeeded
[timestamp] LPDDR4 Training: Write DT: Number of tables = 2
[timestamp]
[timestamp] Debug Init done
[timestamp] Marked DTB cacheable
[timestamp] Bootloader DTB loaded at 0x83000000
[timestamp] Marked DTB cacheable
[timestamp] Kernel DTB loaded at 0x83100000
[timestamp] DeviceTree Init done
[timestamp] Pinmux applied successfully
[timestamp] gicd_base: 0x50041000
[timestamp] gicc_base: 0x50042000
[timestamp] Interrupts Init done
[timestamp] Using base:0x60005090 & irq:208 for tick-timer
[timestamp] Using base:0x60005098 for delay-timer
[timestamp] platform_init_timer: DONE
[timestamp] Timer(tick) Init done
[timestamp] osc freq = 38400 khz
[timestamp]
[timestamp] welcome to cboot
[timestamp]
[timestamp] Cboot Version: 00.00.2018.01-t210-f76b856b
[timestamp] calling constructors
[timestamp] initializing heap
[timestamp] initializing threads
[timestamp] initializing timers
[timestamp] creating bootstrap completion thread
[timestamp] top of bootstrap2()
[timestamp] CPU: ARM Cortex A57
[timestamp] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
[timestamp] initializing platform
[timestamp] Scratch reg 37 & 271 initial value set..
[timestamp] cboot:secure-pmc present
[timestamp] Manufacturer: MF = 0xc2, ID MSB = 0x25
[timestamp] ID LSB = 0x36, ID-CFI len = 194 bytes
[timestamp] Macronix QSPI chip present
[timestamp] SPI device register
[timestamp] init boot device
[timestamp] allocating memory for boot device(SPI)
[timestamp] registering boot device
[timestamp] sdmmc node status = okay
[timestamp] sdcard instance = 0
[timestamp] sdcard gpio handle 0x5d
[timestamp] sdcard gpio pin 0xc9
[timestamp] sdcard gpio flags 0x0
[timestamp] vmmc-supply 0x9d
[timestamp] Instance: 0
[timestamp] Allocating memory for context
[timestamp] enabling clock
[timestamp] sd card init
[timestamp] Check card present and stable
[timestamp] Send command 0
[timestamp] Send command 3
[timestamp] Set RCA for the card
[timestamp] Query card specific data by command 9
[timestamp] Parse CSD data
[timestamp] Send command 7
[timestamp] Calling sd device register
[timestamp] Init sdcard
[timestamp] Allocating memory for boot device
[timestamp] Registering user device
[timestamp] Enable APE clock
[timestamp] Un-powergate APE partition
[timestamp] of_register: registering tegra_udc to of_hal
[timestamp] of_register: registering tegra_udc to of_hal
[timestamp] of_register: registering inv20628-driver to of_hal
[timestamp] of_register: registering ads1015-driver to of_hal
[timestamp] of_register: registering lp8557-bl-driver to of_hal
[timestamp] of_register: registering bq2419x_charger to of_hal
[timestamp] of_register: registering cpc to of_hal
[timestamp] of_register: registering bq27441_fuel_gauge to of_hal
[timestamp] gpio framework initialized
[timestamp] of_register: registering tca9539_gpio to of_hal
[timestamp] of_register: registering tca9539_gpio to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] of_register: registering i2c_bus_driver to of_hal
[timestamp] pmic framework initialized
[timestamp] of_register: registering max77620_pmic to of_hal
[timestamp] regulator framework initialized
[timestamp] of_register: registering tps65132_bl_driver to of_hal
[timestamp] initializing target
[timestamp] gpio_driver_register: register 'tegra_gpio_driver' driver
[timestamp] fixed regulator driver initialized
[timestamp] initializing OF layer
[timestamp] NCK carveout not present
[timestamp] Skipping dts_overrides
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] of_children_init: Ops found for compatible string maxim,max77620
[timestamp] max77620_init using irq 118
[timestamp] register 'maxim,max77620' pmic
[timestamp] gpio_driver_register: register 'max77620-gpio' driver
[timestamp] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
[timestamp] I2C Bus Init done
[timestamp] NCK carveout not present
[timestamp] shim_invoke: No NCT, Calling dts updates
[timestamp] Find /i2c@7000c000's alias i2c0
[timestamp] get eeprom at 1-a0, size 256, type 0
[timestamp] Find /i2c@7000c500's alias i2c2
[timestamp] get eeprom at 3-a0, size 256, type 0
[timestamp] get eeprom at 3-ae, size 256, type 0
[timestamp] pm_ids_update: Updating 1,a0, size 256, type 0
[timestamp] I2C slave not started
[timestamp] I2C write failed
[timestamp] Writing offset failed
[timestamp] eeprom_init: EEPROM read failed
[timestamp] pm_ids_update: eeprom init failed
[timestamp] pm_ids_update: Updating 3,a0, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3448-0000-200
[timestamp] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[timestamp] pm_ids_update: pm id update successful
[timestamp] pm_ids_update: Updating 3,ae, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3449-0000-200
[timestamp] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[timestamp] pm_ids_update: pm id update successful
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
[timestamp] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e3:fd:07
[timestamp] Plugin Manager: Parse ODM data 0x00084000
[timestamp] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] Find /i2c@7000c000's alias i2c0
[timestamp] get eeprom at 1-a0, size 256, type 0
[timestamp] Find /i2c@7000c500's alias i2c2
[timestamp] get eeprom at 3-a0, size 256, type 0
[timestamp] get eeprom at 3-ae, size 256, type 0
[timestamp] pm_ids_update: Updating 1,a0, size 256, type 0
[timestamp] I2C slave not started
[timestamp] I2C write failed
[timestamp] Writing offset failed
[timestamp] eeprom_init: EEPROM read failed
[timestamp] pm_ids_update: eeprom init failed
[timestamp] pm_ids_update: Updating 3,a0, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3448-0000-200
[timestamp] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[timestamp] pm_ids_update: pm id update successful
[timestamp] pm_ids_update: Updating 3,ae, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3449-0000-200
[timestamp] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[timestamp] pm_ids_update: pm id update successful
[timestamp] Chip UID is 000000016441d5c91c0000000e028600
[timestamp] Add serial number:04211190063080008602 as DT property
[timestamp] Applying platform configs
[timestamp] platform-init is not present. Skipping
[timestamp] calling apps_init()
[timestamp] Found 12 GPT partitions in "sd0"
[timestamp] Proceeding to Cold Boot
[timestamp] starting app android_boot_app
[timestamp] Device state: unlocked
[timestamp] display console init
[timestamp] could not find regulator
[timestamp] hdmi cable not connected
[timestamp] is_hdmi_needed: HDMI not connected, returning false
[timestamp] hdmi is not connected
[timestamp] sor0 is not supported
[timestamp] display_console_init: no valid display out_type
[timestamp] subnode volume_up is not found !
[timestamp] subnode back is not found !
[timestamp] subnode volume_down is not found !
[timestamp] subnode menu is not found !
[timestamp] Gpio keyboard init success
[timestamp] found decompressor handler: lz4-legacy
[timestamp] decompressing blob (type 1)...
[timestamp] display_resolution: No display init
[timestamp] Failed to retrieve display resolution
[timestamp] Could not load/initialize BMP blob...ignoring
[timestamp] decompressor handler not found
[timestamp] load_firmware_blob: Firmware blob loaded, entries=2
[timestamp] se_aes_verify_sbk_clear: Error
[timestamp] bl_battery_charging: connected to external power supply
[timestamp] xusb is supported
[timestamp] error while finding nvidia,portmap
[timestamp] could not find regulator
[timestamp] xusb blob version 0 size 126464
[timestamp] firmware size 126464
[timestamp] Firmware timestamp: 0x59fc70d3, Version: 50.20 release
[timestamp] xhci0: 64 bytes context size, 32-bit DMA
[timestamp] usbus0: 5.0Gbps Super Speed USB v3.0
[timestamp] uhub0: <Nvidia XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[timestamp] uhub0: 9 ports with 9 removable, self powered
[timestamp] failed to get HID devices
[timestamp] failed to init xhci or no usb device attached
[timestamp] display_console_ioctl: No display init
[timestamp] switch_backlight failed
[timestamp] device_query_partition_size: failed to open partition sd0:MSC !
[timestamp] MSC Partition not found
[timestamp] device_query_partition_size: failed to open partition sd0:USP !
[timestamp] USP partition read failed!
[timestamp] blob_init: blob-partition USP header read failed
[timestamp] android_boot Unable to update recovery partition
[timestamp] kfs_getpartname: name = LNX
[timestamp] Loading kernel from LNX
[timestamp] Verifying boot image in OdmNonSecureSBK mode
[timestamp] kernel load address: 0x80080000, size: 476960 bytes
[timestamp] ramdisk load address: 0x84100000, size: 0 bytes
[timestamp] load kernel from storage
[timestamp] decompressor handler not found
[timestamp] Successfully loaded kernel and ramdisk images
[timestamp] display_resolution: No display init
[timestamp] Failed to retrieve display resolution
[timestamp] bmp blob is not loaded and initialized
[timestamp] Failed to display boot-logo
[timestamp] NCK carveout not present
[timestamp] Skipping dts_overrides
[timestamp] NCK carveout not present
[timestamp] shim_invoke: No NCT, Calling dts updates
[timestamp] Find /i2c@7000c000's alias i2c0
[timestamp] get eeprom at 1-a0, size 256, type 0
[timestamp] Find /i2c@7000c500's alias i2c2
[timestamp] get eeprom at 3-a0, size 256, type 0
[timestamp] get eeprom at 3-ae, size 256, type 0
[timestamp] pm_ids_update: Updating 1,a0, size 256, type 0
[timestamp] I2C slave not started
[timestamp] I2C write failed
[timestamp] Writing offset failed
[timestamp] eeprom_init: EEPROM read failed
[timestamp] pm_ids_update: eeprom init failed
[timestamp] pm_ids_update: Updating 3,a0, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3448-0000-200
[timestamp] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
[timestamp] pm_ids_update: pm id update successful
[timestamp] pm_ids_update: Updating 3,ae, size 256, type 0
[timestamp] pm_ids_update: The pm board id is 3449-0000-200
[timestamp] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
[timestamp] pm_ids_update: pm id update successful
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
[timestamp] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
[timestamp] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
[timestamp] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e3:fd:07
[timestamp] Plugin Manager: Parse ODM data 0x00084000
[timestamp] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] Add serial number:04211190063080008602 as DT property
[timestamp] "bpmp" doesn't exist, creating
[timestamp] Updated bpmp info to DTB
[timestamp] Updated initrd info to DTB
[timestamp] "proc-board" doesn't exist, creating
[timestamp] Updated board info to DTB
[timestamp] "pmu-board" doesn't exist, creating
[timestamp] Updated board info to DTB
[timestamp] "display-board" doesn't exist, creating
[timestamp] Updated board info to DTB
[timestamp] "reset" doesn't exist, creating
[timestamp] Updated reset info to DTB
[timestamp] display_console_ioctl: No display init
[timestamp] display_console_ioctl: No display init
[timestamp] display_console_ioctl: No display init
[timestamp] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000
[timestamp] DTB cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
[timestamp] Updated bootarg info to DTB
[timestamp] Adding uuid 000000016441d5c91c0000000e028600 to DT
[timestamp] device_query_partition_size: failed to open partition sd0:RP6 !
[timestamp] RP6 partition read failed!
[timestamp] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7
[timestamp] Updated memory info to DTB
[timestamp] Updated system-lp0-disable info to DTB
[timestamp] set vdd_core voltage to 1075 mv
[timestamp] setting 'vdd-core' regulator to 1075000 micro volts
[timestamp] could not find regulator
[timestamp] Found secure-pmc; disable BPMP
U-Boot 2016.07-g541e96c (May 31 2019 - 15:44:14 -0700)
TEGRA210
Model: NVIDIA P3450-Porg
Board: NVIDIA P3450-PORG
DRAM: 4 GiB
MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 2  1  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
663 bytes read in 124 ms (4.9 KiB/s)
p3450-porg eMMC boot options
1: primary kernel
Enter choice: 1: primary kernel
Retrieving file: /boot/initrd
0 bytes read in 94 ms (0 Bytes/s)
Retrieving file: /boot/Image
34048008 bytes read in 1534 ms (21.2 MiB/s)
append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/nfs ip=dhcp nfsroot=10.42.0.1:/srv/nfs/instances/00000,v3 rw rootwait
## Flattened Device Tree blob at 83100000
Booting using the fdt blob at 0x83100000
reserving fdt memory region: addr=80000000 size=20000
Using Device Tree in place at 0000000083100000, end 0000000083173e9a
Starting kernel ...
<hit enter to activate fiq debugger>
[timestamp] Booting Linux on physical CPU 0x0
[timestamp] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019
[timestamp] Boot CPU: AArch64 Processor [411fd071]
[timestamp] OF: fdt:memory scan node memory@80000000, reg size 48,
[timestamp] OF: fdt: - 80000000 , 7ee00000
[timestamp] OF: fdt: - 100000000 , 7f200000
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[timestamp] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[timestamp] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
[timestamp] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[timestamp] cma: Reserved 64 MiB at 0x00000000fac00000
[timestamp] psci: probing for conduit method from DT.
[timestamp] psci: PSCIv1.0 detected in firmware.
[timestamp] psci: Using standard PSCI v0.2 function IDs
[timestamp] psci: MIGRATE_INFO_TYPE not supported.
[timestamp] psci: SMC Calling Convention v1.1
[timestamp] percpu: Embedded 23 pages/cpu @ffffffc0fefd2000 s53400 r8192 d32616 u94208
[timestamp] CPU features: enabling workaround for ARM erratum 832075
[timestamp] Speculative Store Bypass Disable mitigation not required
[timestamp] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
[timestamp] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/nfs ip=dhcp nfsroot=10.42.0.1:/srv/nfs/instances/00000,v3 rw rootwait
[timestamp] log_buf_len individual max cpu contribution: 32768 bytes
[timestamp] log_buf_len total cpu_extra contributions: 98304 bytes
[timestamp] log_buf_len min size: 32768 bytes
[timestamp] log_buf_len: 131072 bytes
[timestamp] early log buf free: 29460(89%)
[timestamp] PID hash table entries: 4096 (order: 3, 32768 bytes)
[timestamp] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[timestamp] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[timestamp] Memory: 3576064K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 108288K reserved, 475136K cma-reserved)
[timestamp] Virtual kernel memory layout:
[timestamp] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[timestamp] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[timestamp] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB)
[timestamp] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB)
[timestamp] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB)
[timestamp] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB)
[timestamp] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB)
[timestamp] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[timestamp] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[timestamp] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[timestamp] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
[timestamp] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
[timestamp] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[timestamp] Preemptible hierarchical RCU implementation.
[timestamp] Build-time adjustment of leaf fanout to 64.
[timestamp] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[timestamp] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[timestamp] NR_IRQS:64 nr_irqs:64 0
[timestamp] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[timestamp] t210 clock and reset probe
[timestamp] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[timestamp] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[timestamp] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[timestamp] Console: colour dummy device 80x25
[timestamp] console [tty0] enabled
[timestamp] kmemleak: Kernel memory leak detector disabled
[timestamp] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[timestamp] pid_max: default: 32768 minimum: 301
[timestamp] Security Framework initialized
[timestamp] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[timestamp] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[timestamp] ftrace: allocating 46802 entries in 183 pages
[timestamp] ASID allocator initialised with 65536 entries
[timestamp] tegra-id: chipid=22117.
[timestamp] tegra-id: opt_subrevision=0.
[timestamp] Tegra Speedo/IDDQ fuse revision 4
[timestamp] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[timestamp] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0
[timestamp] Tegra: CPU Speedo Value 2087, SoC Speedo Value 1967, GPU Speedo Value 2083
[timestamp] Tegra: CPU IDDQ Value 2464, SoC IDDQ Value 2692, GPU IDDQ Value 3280
[timestamp] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1
[timestamp] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[timestamp] DTB Build time: Mar 15 2019 09:52:07
[timestamp] CPU1: Booted secondary processor [411fd071]
[timestamp] CPU2: Booted secondary processor [411fd071]
[timestamp] CPU3: Booted secondary processor [411fd071]
[timestamp] Brought up 4 CPUs
[timestamp] SMP: Total of 4 processors activated.
[timestamp] CPU features: detected feature: 32-bit EL0 Support
[timestamp] CPU: All CPU(s) started at EL2
[timestamp] alternatives: patching kernel code
[timestamp] devtmpfs: initialized
[timestamp] Initilizing CustomIPI irq domain
[timestamp] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[timestamp] futex hash table entries: 1024 (order: 4, 65536 bytes)
[timestamp] pinctrl core: initialized pinctrl subsystem
[timestamp] OS set in device tree is not L4T.
[timestamp] regulator-dummy: no parameters
[timestamp] Initializing plugin-manager
[timestamp] Plugin module not found
[timestamp] node /plugin-manager/fragement@0 match with board >=3448-0000-100
[timestamp] node /plugin-manager/fragment@1 match with board >=3448-0000-101
[timestamp] node /plugin-manager/fragment@5 match with board 3449-0000-200
[timestamp] NET: Registered protocol family 16
[timestamp] pstore: using zlib compression
[timestamp] console [pstore-1] enabled
[timestamp] pstore: Registered ramoops as persistent store backend
[timestamp] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[timestamp] cpuidle: using governor menu
[timestamp] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[timestamp] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000)
[timestamp] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[timestamp] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[timestamp] tegra_bpmp_of_clk_init: EMC proxy not found.
[timestamp] tegra_powergate_init: DONE
[timestamp] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[timestamp] DTB Build time: Mar 15 2019 09:52:07
[timestamp] Tegra reboot handler registered.
[timestamp] iommu: Adding device tegra-carveouts to group 0
[timestamp] platform tegra-carveouts: domain=ffffffc0f9bf0318 allocates as[0]=ffffffc0f9be00a8
[timestamp] iommu: Adding device smmu_test to group 1
[timestamp] platform smmu_test: domain=ffffffc0f9bf0558 allocates as[0]=ffffffc0f9be0110
[timestamp] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
[timestamp] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
[timestamp] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
[timestamp] nv-tegra-mc 70019000.mc: No mssnvlink node
[timestamp] mc-err: mcerr ops are set to t21x
[timestamp] iommu: Adding device 70090000.xusb to group 2
[timestamp] iommu: Adding device 70006000.serial to group 3
[timestamp] platform 70006000.serial: domain=ffffffc0f9480618 allocates as[0]=ffffffc0f9be0178
[timestamp] iommu: Adding device 70006040.serial to group 4
[timestamp] iommu: Adding device 70006200.serial to group 5
[timestamp] iommu: Adding device sound to group 6
[timestamp] platform sound: domain=ffffffc0f9480b58 allocates as[0]=ffffffc0f9be01e0
[timestamp] iommu: Adding device 7000d400.spi to group 7
[timestamp] iommu: Adding device 7000d600.spi to group 8
[timestamp] iommu: Adding device 70410000.spi to group 9
[timestamp] iommu: Adding device 50000000.host1x to group 10
[timestamp] iommu: Adding device 54080000.vi to group 11
[timestamp] iommu: Adding device 54600000.isp to group 12
[timestamp] iommu: Adding device 54680000.isp to group 13
[timestamp] iommu: Adding device tegradc.0 to group 14
[timestamp] platform tegradc.0: domain=ffffffc0f948ea98 allocates as[0]=ffffffc0f9be0248
[timestamp] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[timestamp] iommu: Adding device tegradc.1 to group 15
[timestamp] platform tegradc.1: domain=ffffffc0f948ecd8 allocates as[0]=ffffffc0f9be02b0
[timestamp] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[timestamp] iommu: Adding device 54340000.vic to group 16
[timestamp] iommu: Adding device 544c0000.nvenc to group 17
[timestamp] iommu: Adding device 54500000.tsec to group 18
[timestamp] iommu: Adding device 54100000.tsecb to group 19
[timestamp] iommu: Adding device 54480000.nvdec to group 20
[timestamp] iommu: Adding device 54380000.nvjpg to group 21
[timestamp] iommu: Adding device 546c0000.i2c to group 22
[timestamp] iommu: Adding device 57000000.gpu to group 23
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 allocates as[0]=ffffffc0f9be0318
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 allocates as[1]=ffffffc0f9be0380
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 allocates as[2]=ffffffc0f9be03e8
[timestamp] platform 57000000.gpu: domain=ffffffc0f9499cd8 allocates as[3]=ffffffc0f9be0450
[timestamp] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[timestamp] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[timestamp] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
[timestamp] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[timestamp] tegra-pmc: ### PMC reset status reg: 0x0
[timestamp] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[timestamp] tegra-pmc: Clear bootloader IO dpd settings
[timestamp] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[timestamp] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[timestamp] iommu: Adding device 70012000.se to group 24
[timestamp] iommu: Adding device 7000c000.i2c to group 25
[timestamp] iommu: Adding device 7000c400.i2c to group 26
[timestamp] iommu: Adding device 7000c500.i2c to group 27
[timestamp] iommu: Adding device 7000c700.i2c to group 28
[timestamp] iommu: Adding device 7000d000.i2c to group 29
[timestamp] iommu: Adding device 7000d100.i2c to group 30
[timestamp] iommu: Adding device sdhci-tegra.0 to group 31
[timestamp] platform sdhci-tegra.0: domain=ffffffc0f9ad5e58 allocates as[0]=ffffffc0f9be04b8
[timestamp] iommu: Adding device 700d0000.xudc to group 32
[timestamp] vdd-ac-bat: 5000 mV
[timestamp] vdd-5v0-sys: 5000 mV
[timestamp] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[timestamp] vdd-5v0-hdmi: 5000 mV
[timestamp] vdd-1v8: 1800 mV
[timestamp] vdd-fan: supplied by vdd-5v0-sys
[timestamp] vdd-fan: 5000 mV
[timestamp] vdd-usb-vbus: supplied by vdd-5v0-sys
[timestamp] vdd-usb-vbus: 5000 mV
[timestamp] vdd-usb-vbus2: 5000 mV
[timestamp] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[timestamp] GPIO line 151 (camera-control-output-low) hogged as output/low
[timestamp] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
[timestamp] eventlib_kernel: keventlib is initialized, test id: 0
[timestamp] SCSI subsystem initialized
[timestamp] usbcore: registered new interface driver usbfs
[timestamp] usbcore: registered new interface driver hub
[timestamp] usbcore: registered new device driver usb
[timestamp] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[timestamp] random: fast init done
[timestamp] vdd-core: 600 <--> 1162 mV at 1075 mV
[timestamp] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[timestamp] vdd-ddr-1v1: 1150 mV
[timestamp] vdd-pre-reg-1v35: 1350 mV
[timestamp] vdd-1v8: 1800 mV
[timestamp] vdd-1v8: Failed to create debugfs directory
[timestamp] avdd-sys-1v2: 1200 mV
[timestamp] vdd-pex-1v0: 1050 mV
[timestamp] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
[timestamp] max77620-ldo3: at 3100 mV
[timestamp] vdd-rtc: 850 <--> 1100 mV at 1000 mV
[timestamp] max77620-ldo5: at 3100 mV
[timestamp] max77620-ldo6: at 2800 mV
[timestamp] avdd-1v05-pll: 1050 mV
[timestamp] avdd-io-hdmi-dp: 1050 mV
[timestamp] GPIO line 505 (spmic-default-output-high) hogged as output/high
[timestamp] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
[timestamp] max77620 4-003c: max77620 probe successful
[timestamp] i2c i2c-6: Unbalanced pm_runtime_enable!
[timestamp] media: Linux media interface: v0.10
[timestamp] Linux video capture interface: v2.00
[timestamp] pps_core: LinuxPPS API ver. 1 registered
[timestamp] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[timestamp] PTP clock support registered
[timestamp] tegra_fiq_debugger_init: found FIQ source (IRQ 98)
[timestamp] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
[timestamp] Advanced Linux Sound Architecture Driver Initialized.
[timestamp] Bluetooth: Core ver 2.22
[timestamp] NET: Registered protocol family 31
[timestamp] Bluetooth: HCI device and connection manager initialized
[timestamp] Bluetooth: HCI socket layer initialized
[timestamp] Bluetooth: L2CAP socket layer initialized
[timestamp] Bluetooth: SCO socket layer initialized
[timestamp] tegra210_dvfs: no clock found for sdmmc2_ddr
[timestamp] tegra210_dvfs: no clock found for sdmmc4_ddr
[timestamp] tegra210_dvfs: no clock found for sdmmc1_ddr
[timestamp] tegra210_dvfs: no clock found for sdmmc3_ddr
[timestamp] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[timestamp] vdd-3v3-sys: supplied by vdd-5v0-sys
[timestamp] vdd-3v3-sys: 3300 mV
[timestamp] vdd-1v8: supplied by vdd-3v3-sys
[timestamp] vdd-usb-vbus2: supplied by vdd-3v3-sys
[timestamp] vdd-3v3-sd: supplied by vdd-3v3-sys
[timestamp] vdd-3v3-sd: 3300 mV
[timestamp] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[timestamp] avdd-io-edp-1v05: 1050 mV
[timestamp] vdd-usb-hub-en: supplied by vdd-1v8
[timestamp] vdd-usb-hub-en: 5000 mV
[timestamp] camchar: rtcpu character device driver loaded
[timestamp] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
[timestamp] clocksource: Switched to clocksource arch_sys_counter
[timestamp] VFS: Disk quotas dquot_6.6.0
[timestamp] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[timestamp] nvmap_heap_init: nvmap_heap_init: created heap block cache
[timestamp] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
[timestamp] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
[timestamp] cma: enabled page replacement for spfn=d7000, epfn=f0000
[timestamp] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[timestamp] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[timestamp] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[timestamp] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[timestamp] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[timestamp] nvmap_page_pool_init: Total RAM pages: 1012800
[timestamp] nvmap_page_pool_init: nvmap page pool size: 126600 pages (494 MB)
[timestamp] nvmap_background_zero_thread: PP zeroing thread starting.
[timestamp] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[timestamp] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
[timestamp] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[timestamp] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[timestamp] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[timestamp] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[timestamp] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[timestamp] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[timestamp] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB
[timestamp] NET: Registered protocol family 2
[timestamp] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[timestamp] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[timestamp] TCP: Hash tables configured (established 32768 bind 32768)
[timestamp] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[timestamp] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[timestamp] NET: Registered protocol family 1
[timestamp] RPC: Registered named UNIX socket transport module.
[timestamp] RPC: Registered udp transport module.
[timestamp] RPC: Registered tcp transport module.
[timestamp] RPC: Registered tcp NFSv4.1 backchannel transport module.
[timestamp] Trying to unpack rootfs image as initramfs...
[timestamp] host1x 50000000.host1x: initialized
[timestamp] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[timestamp] audit: initializing netlink subsys (disabled)
[timestamp] audit: type=2000 audit(0.543:1): initialized
[timestamp] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[timestamp] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[timestamp] ntfs: driver 2.1.32 [Flags: R/W].
[timestamp] 9p: Installing v9fs 9p2000 file system support
[timestamp] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[timestamp] io scheduler noop registered
[timestamp] io scheduler cfq registered (default)
[timestamp] gic 702f9000.agic: GIC IRQ controller registered
[timestamp] iommu: Adding device 702ef000.adsp to group 33
[timestamp] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[timestamp] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x9229413
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
[timestamp] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[timestamp] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[timestamp] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
[timestamp] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[timestamp] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes
[timestamp] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[timestamp] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000
[timestamp] Adding domain tsec-pd to PM domain host1x-pd
[timestamp] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
[timestamp] tsec 54500000.tsec: initialized
[timestamp] tsec 54100000.tsecb: initialized
[timestamp] Adding domain nvdec-pd to PM domain host1x-pd
[timestamp] nvdec 54480000.nvdec: initialized
[timestamp] Adding domain vic03-pd to PM domain host1x-pd
[timestamp] Adding domain msenc-pd to PM domain host1x-pd
[timestamp] Adding domain nvjpg-pd to PM domain host1x-pd
[timestamp] falcon 54340000.vic: initialized
[timestamp] falcon 544c0000.nvenc: initialized
[timestamp] falcon 54380000.nvjpg: initialized
[timestamp] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[timestamp] display board info: id 0x0, fab 0x0
[timestamp] generic_infoframe_type: 0x87
[timestamp] tegradc tegradc.0: DT parsed successfully
[timestamp] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
[timestamp] tegradc tegradc.0: probed
[timestamp] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[timestamp] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels
[timestamp] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[timestamp] kfuse 7000fc00.kfuse: initialized
[timestamp] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
[timestamp] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[timestamp] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[timestamp] vdd-cpu: 708 <--> 1322 mV at 708 mV
[timestamp] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[timestamp] vdd-gpu: applied init 1000000uV constraint
[timestamp] vdd-gpu: 708 <--> 1323 mV at 997 mV
[timestamp] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[timestamp] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[timestamp] No Device Node present for smmu client: serial8250 !!
[timestamp] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[timestamp] iommu: Adding device serial8250 to group 35
[timestamp] console [ttyS0] disabled
[timestamp] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[timestamp] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
[timestamp] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
[timestamp] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[timestamp] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[timestamp] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[timestamp] pci_bus 0000:00: root bus resource [bus 00-ff]
[timestamp] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[timestamp] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[timestamp] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[timestamp] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
[timestamp] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
[timestamp] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[timestamp] pci 0000:00:02.0: PCI bridge to [bus 01]
[timestamp] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[timestamp] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
[timestamp] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[timestamp] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[timestamp] console [ttyS0] enabled
[timestamp] Console: switching to colour frame buffer device 80x30
[timestamp] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
[timestamp] serial-tegra 70006200.serial: RX in PIO mode
[timestamp] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
[timestamp] [drm] Initialized
[timestamp] brd: module loaded
[timestamp] tegradc tegradc.0: fb registered
[timestamp] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
[timestamp] loop: module loaded
[timestamp] tegra_profiler: version: 1.132, samples/io: 46/26
[timestamp] tegra_profiler: auth: init
[timestamp] THERMAL EST: found 2 subdevs
[timestamp] THERMAL EST num_resources: 0
[timestamp] [THERMAL EST subdev 0]
[timestamp] [THERMAL EST subdev 1]
[timestamp] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
[timestamp] THERMAL EST: thz register success.
[timestamp] THERMAL EST: end of probe, return err: 0
[timestamp] hisi_sas: driver version v1.6
[timestamp] tegra-qspi 70410000.spi: Prod settings list not found
[timestamp] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
[timestamp] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
[timestamp] libphy: Fixed MDIO Bus: probed
[timestamp] tun: Universal TUN/TAP device driver, 1.6
[timestamp] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[timestamp] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[timestamp] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[timestamp] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[timestamp] igb: Copyright (c) 2007-2014 Intel Corporation.
[timestamp] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[timestamp] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[timestamp] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
[timestamp] Copyright(c) 1999 - 2017 Intel Corporation.
[timestamp] r8168 0000:01:00.0: enabling device (0000 -> 0003)
[timestamp] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[timestamp] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
[timestamp] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e3:fd:07 from device tree
[timestamp] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[timestamp] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
[timestamp] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[timestamp] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[timestamp] PPP generic driver version 2.4.2
[timestamp] PPP BSD Compression module registered
[timestamp] PPP Deflate Compression module registered
[timestamp] PPP MPPE Compression module registered
[timestamp] NET: Registered protocol family 24
[timestamp] usbcore: registered new interface driver r8152
[timestamp] usbcore: registered new interface driver asix
[timestamp] usbcore: registered new interface driver ax88179_178a
[timestamp] usbcore: registered new interface driver cdc_ether
[timestamp] usbcore: registered new interface driver net1080
[timestamp] usbcore: registered new interface driver cdc_subset
[timestamp] usbcore: registered new interface driver zaurus
[timestamp] usbcore: registered new interface driver cdc_ncm
[timestamp] VFIO - User Level meta-driver version: 0.3
[timestamp] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[timestamp] ehci-pci: EHCI PCI platform driver
[timestamp] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[timestamp] ohci-pci: OHCI PCI platform driver
[timestamp] ohci-platform: OHCI generic platform driver
[timestamp] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[timestamp] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f95d6800 id
[timestamp] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
[timestamp] tegra-xusb 70090000.xusb: Falling back to user helper
[timestamp] usbcore: registered new interface driver uas
[timestamp] usbcore: registered new interface driver usb-storage
[timestamp] usbcore: registered new interface driver usbserial
[timestamp] tegra-xudc-new 700d0000.xudc: device count: 1
[timestamp] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[timestamp] tegra-xudc-new 700d0000.xudc: vbus state: 1
[timestamp] tegra-xudc-new 700d0000.xudc: device mode on: 0
[timestamp] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
[timestamp] tegra-xudc-new 700d0000.xudc: active: 0 => 1
[timestamp] mousedev: PS/2 mouse device common for all mice
[timestamp] usbcore: registered new interface driver xpad
[timestamp] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[timestamp] rtc rtc1: alarm rtc device
[timestamp] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[timestamp] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[timestamp] i2c /dev entries driver
[timestamp] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6
[timestamp] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[timestamp] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
[timestamp] imx219 6-0010: board setup failed
[timestamp] imx219: probe of 6-0010 failed with error -121
[timestamp] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[timestamp] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[timestamp] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[timestamp] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[timestamp] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[timestamp] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[timestamp] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[timestamp] tegra_aotag tegra-aotag: Registering sensor 0
[timestamp] tegra_aotag tegra-aotag: Invalid temp readout
[timestamp] tegra_aotag tegra-aotag: Invalid temp readout
[timestamp] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[timestamp] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
[timestamp] tegra_aotag tegra-aotag: Invalid temp readout
[timestamp] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
[timestamp] parse_throttle_dt_data: Num cap clks = 6
[timestamp] parse_throttle_dt_data: clk=cclk_g type=2
[timestamp] parse_throttle_dt_data: clk=gpu type=4
[timestamp] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[timestamp] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[timestamp] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[timestamp] parse_throttle_dt_data: clk=emc type=3
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] tegra_throttle_probe: probe successful. #cdevs=4
[timestamp] FAN dev name: pwm-fan
[timestamp] FAN:gpio request success.
[timestamp] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[timestamp] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[timestamp] pwm_fan_driver pwm-fan: fan tach request irq success
[timestamp] pwm_fan_driver pwm-fan: tach period: 1000
[timestamp] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[timestamp] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[timestamp] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[timestamp] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[timestamp] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[timestamp] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[timestamp] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[timestamp] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[timestamp] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[timestamp] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[timestamp] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
[timestamp] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
[timestamp] device-mapper: uevent: version 1.0.3
[timestamp] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[timestamp] tegra210-cpufreq cpufreq: probe()...completed
[timestamp] sdhci: Secure Digital Host Controller Interface driver
[timestamp] sdhci: Copyright(c) Pierre Ossman
[timestamp] sdhci-pltfm: SDHCI platform and OF driver helper
[timestamp] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[timestamp] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[timestamp] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
[timestamp] tegra-se 70012000.se: tegra_se_probe: complete
[timestamp] hidraw: raw HID events driver (C) Jiri Kosina
[timestamp] usbcore: registered new interface driver usbhid
[timestamp] usbhid: USB HID core driver
[timestamp] tegra21x_actmon 6000c800.actmon: in actmon_register()...
[timestamp] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[timestamp] nvpmodel: initialized successfully
[timestamp] usbcore: registered new interface driver snd-usb-audio
[timestamp] No Device Node present for smmu client: snd-soc-dummy !!
[timestamp] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[timestamp] iommu: Adding device snd-soc-dummy to group 36
[timestamp] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[timestamp] OPE platform probe
[timestamp] OPE platform probe successful
[timestamp] OPE platform probe
[timestamp] OPE platform probe successful
[timestamp] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[timestamp] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[timestamp] u32 classifier
[timestamp] Actions configured
[timestamp] Initializing XFRM netlink socket
[timestamp] NET: Registered protocol family 10
[timestamp] NET: Registered protocol family 17
[timestamp] NET: Registered protocol family 15
[timestamp] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[timestamp] Bluetooth: RFCOMM socket layer initialized
[timestamp] Bluetooth: RFCOMM ver 1.11
[timestamp] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[timestamp] Bluetooth: HIDP socket layer initialized
[timestamp] 9pnet: Installing 9P2000 support
[timestamp] Key type dns_resolver registered
[timestamp] Registered cp15_barrier emulation handler
[timestamp] Registered setend emulation handler
[timestamp] registered taskstats version 1
[timestamp] Adding domain ve2-pd to PM domain host1x-pd
[timestamp] Adding domain ve-pd to PM domain host1x-pd
[timestamp] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[timestamp] tegradc tegradc.1: No lt-data, using default setting
[timestamp] tegradc tegradc.1: No hpd-gpio in DT
[timestamp] tegradc tegradc.1: DT parsed successfully
[timestamp] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1
[timestamp] tegradc tegradc.1: dpd enable lookup fail:-19
[timestamp] Host read timeout at address 545c00c4
[timestamp] tegradc tegradc.1: probed
[timestamp] tegradc tegradc.1: fb registered
[timestamp] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[timestamp] isp 54600000.isp: initialized
[timestamp] isp 54680000.isp: initialized
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_round_rate: no gbus parent
[timestamp] clk_cbus_recalc_rate: no gbus parent
[timestamp] tegra_dvfs: GPU-cap: registered
[timestamp] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
[timestamp] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled
[timestamp] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled
[timestamp] tegra_dvfs: vdd-gpu-vts: registered
[timestamp] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
[timestamp] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
[timestamp] tegradc tegradc.1: blank - powerdown
[timestamp] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
[timestamp] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
[timestamp] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
[timestamp] input: gpio-keys as /devices/gpio-keys/input/input1
[timestamp] Extcon DP: HPD disabled
[timestamp] hpd: hpd_switch 0
[timestamp] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[timestamp] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
[timestamp] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
[timestamp] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:26 UTC (946688426)
[timestamp] vi 54080000.vi: vi_probe: ++
[timestamp] vi 54080000.vi: initialized
[timestamp] vi 54080000.vi: subdev nvcsi--1 bound
[timestamp] Disable partitions left on by BL
[timestamp] mmc0: hw tuning done ...
[timestamp] mmc0: new ultra high speed SDR104 SDXC card at address 0001
[timestamp] mmcblk0: mmc0:0001 GC2QT 59.6 GiB
[timestamp] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[timestamp] disb
[timestamp] bwmgr: missing cdev-type property
[timestamp] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[timestamp] DRAM derating cdev registered.
[timestamp] eth0: 0xffffff800a2fe000, 00:04:4b:e3:fd:07, IRQ 404
[timestamp] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[timestamp] r8168: eth0: link up
[timestamp] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[timestamp] Sending DHCP requests ., OK
[timestamp] IP-Config: Got DHCP answer from 10.42.0.1, my address is 10.42.0.55
[timestamp] IP-Config: Complete:
[timestamp] device=eth0, hwaddr=00:04:4b:e3:fd:07, ipaddr=10.42.0.55, mask=255.255.255.0, gw=10.42.0.1
[timestamp] host=10.42.0.55, domain=, nis-domain=(none)
[timestamp] bootserver=10.42.0.1, rootserver=10.42.0.1, rootpath= nameserver0=10.42.0.1
[timestamp] vdd-1v8: disabling
[timestamp] vdd-fan: disabling
[timestamp] vdd-usb-vbus: disabling
[timestamp] vdd-usb-vbus2: disabling
[timestamp] avdd-io-edp-1v05: disabling
[timestamp] vdd-usb-hub-en: disabling
[timestamp] ALSA device list:
[timestamp] #0: tegra-hda at 0x70038000 irq 83
[timestamp] #1: tegra-snd-t210ref-mobile-rt565x
[timestamp] VFS: Mounted root (nfs filesystem) on device 0:17.
[timestamp] devtmpfs: mounted
[timestamp] Freeing unused kernel memory: 8512K
[timestamp] systemd[1]: System time before build time, advancing clock.
[timestamp] ip_tables: (C) 2000-2006 Netfilter Core Team
[timestamp] cgroup: cgroup2: unknown option "nsdelegate"
[timestamp] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[timestamp] systemd[1]: Detected architecture arm64.
[timestamp] systemd[1]: Set hostname to <nano-dathon>.
[timestamp] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[timestamp] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[timestamp] random: crng init done
[timestamp] systemd[1]: Reached target Swap.
[timestamp] systemd[1]: Created slice System Slice.
[timestamp] systemd[1]: Created slice system-serial\x2dgetty.slice.
[timestamp] systemd[1]: Listening on Journal Socket (/dev/log).
[timestamp] systemd[1]: Listening on RPCbind Server Activation Socket.
[timestamp] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[timestamp] systemd-journald[1848]: Received request to flush runtime journal from PID 1
[timestamp] using random self ethernet address
[timestamp] using random host ethernet address
[timestamp] using random self ethernet address
[timestamp] using random host ethernet address
Ubuntu 18.04.2 LTS nano-dathon ttyS0
nano-dathon login: [ 37.996275] watchdog: watchdog0: watchdog did not stop!
[timestamp] systemd-shutdow: 33 output lines suppressed due to ratelimiting
[timestamp] tegra-xusb 70090000.xusb: Host not halted after 16000 microseconds.
[timestamp] reboot: Restarting system
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment