buildcircuit

const int redPin = 3;

#define FADESPEED 1 

void setup() {
 
Serial.begin(38400);
  
pinMode(redPin, OUTPUT); 

buildcircuit

/*
 
 */

// pins for the LEDs:
const int redPin = 3;
/*const int greenPin = 5;
const int bluePin = 6;*/

/*const int redPin2 = 9;

buildcircuit

void setup() {
  // initialize serial communication:
  Serial.begin(38400);// this can be different for your Bluetooth module. It can be 9600 also.
  // initialize the LED pins:
  for (int thisPin = 2; thisPin < 13; thisPin++) {
    pinMode(thisPin, OUTPUT);
  }
}

void loop() {

buildcircuit

void setup() {
  // initialize serial communication:
  Serial.begin(38400);// this can be different for your Bluetooth module. It can be 9600 also.
  // initialize the LED pins:
  for (int thisPin = 2; thisPin < 13; thisPin++) {
    pinMode(thisPin, OUTPUT);
  }
}

void loop() {

buildcircuit

/*
 PROJECT: Ardroid
 CODED BY: Anurag Goel
 PUBLIC Licence Free To Modify
*/

#define START_CMD_CHAR '*'
#define END_CMD_CHAR '#'
#define DIV_CMD_CHAR '|'
#define CMD_DIGITALWRITE 10

buildcircuit

/****RF SWITCH WITH ARDUINO*/ 

// The 4 output ports of RF module are connected to A0-A3
//When the Analog pins receive the signal from the RF module, the Arduino activates the corresponding pin.
//For example, when A0 receives a signal, it will turn on Arduino Pin number D2

int sensorPin0 = A0;    
int Pin0 = 2;   // pin D2  
int sensorValue0 = 0; 

buildcircuit

/****RF SWITCH WITH ARDUINO*/ 

// The 4 output ports of RF module are connected to A0-A3
//When the Analog pins receive the signal from the RF module, the Arduino activates the corresponding pin.
//For example, when A0 receives a signal, it will turn on Arduino Pin number D2

int sensorPin0 = A0;    
int Pin0 = 2;     
int sensorValue0 = 0; 

buildcircuit

void setup() {
  // initialize serial communication:
  Serial.begin(38400);// this can be different for your Bluetooth module. It can be 9600 also.
  // initialize the LED pins:
  for (int thisPin = 2; thisPin < 13; thisPin++) {
    pinMode(thisPin, OUTPUT);
  }
}

void loop() {

buildcircuit

// connect 9V to the counter module
// Connect 5V of Arduino to 5V of module
// Connect GND of Arduino to GND of module
// Connect pin 13 of Arduino to pin 5 of module
// Connect pin 12 of Arduino to pin 4 of module
// Connect pin 11 of Arduino to pin 14 of module

// other connections
//Use this example: https://www.arduino.cc/en/tutorial/debounce and make two exactly same circuits, connect one switch to pin 2 and other to pin 3 of Arduino

buildcircuit

// include the library code:
#include <LiquidCrystal.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(13, 12, 10, 9, 8, 7);

int REDLED = 3;           // the PWM pin the LED is attached to
int BLUELED = 5;
int GREENLED= 6;