Xavier Devkit 4.6.3 UART Log - Failed to Flash

gistfile1.txt

I> Boot-mode: Platform RCM
[0005.773] I> Chip revision : A02P
[0005.776] I> Bootrom patch version : 15 (correctly patched)
[0005.781] I> ATE fuse revision : 0x200
[0005.785] I> Ram repair fuse : 0x0
[0005.788] I> Ram Code : 0x2
[0005.790] I> rst_source : 0x0
[0005.793] I> rst_level : 0x0
[0005.797] I> USB configuration success
[0007.881] I> mb2 image downloaded
[0007.909] I> Recovery boot mode 0
[0007.913] I> Boot-device: eMMC
[0007.917] I> UPHY full init done
[0007.924] I> MB1 done

[0007.929] W> Profiler not initialized
[0007.932] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-d95d9a83)
[0007.940] W> Profiler not initialized
[0007.944] I> DMA Heap @ [0x40020000 - 0x40065800]
[0007.948] I> Default Heap @ [0xd486400 - 0xd48a400]
[0007.953] W> Profiler not initialized
[0007.957] W> Profiler not initialized
[0007.960] W> Profiler not initialized
[0008.029] I> sdmmc DDR50 mode
[0008.033] I> No supported QSPI flash found
[0008.037] E> QSPI Flash: Insufficient flash size (0 MB)
[0008.042] I> QSPI Flash is not present.
[0008.093] E> Link startup dme_set failed
[0008.097] E> UFS initialization failed
[0008.100] I> UFS is not present
[0008.103] W> Profiler not initialized
[0008.111] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0008.120] I> Found 42 partitions in SDMMC_USER (instance 3)
[0008.125] W> Profiler not initialized
[0008.129] W> Profiler not initialized
[0008.132] W> Profiler not initialized
[0008.136] I> Entering 3p server
[0008.139] I> USB configuration success
[0009.055] I> Populate chip info
[0009.083] I> Populate eeprom info
[0009.087] I> Populate eeprom info for module cvm
4 is too large than ratchet level 2 from HW fuses.
[0141.974] I> MB1 (prd-version: 1.5.1.9-t194-41334769-73a9b7ef)
[0141.979] I> Boot-mode: RCM
[0141.982] I> Chip revision : A02P
[0141.985] I> Bootrom patch version : 15 (correctly patched)
[0141.990] I> ATE fuse revision : 0x200
[0141.994] I> Ram repair fuse : 0x0
[0141.997] I> Ram Code : 0x2
[0141.999] I> rst_source : 0xb
[0142.002] I> rst_level : 0x1
[0142.006] I> USB configuration success
[0144.026] I> bct_bootrom image downloaded
[0144.034] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0144.042] I> Temperature = 29500
[0144.045] W> Skipping boost for clk: BPMP_CPU_NIC
[0144.049] W> Skipping boost for clk: BPMP_APB
[0144.054] W> Skipping boost for clk: AXI_CBB
[0144.057] W> Skipping boost for clk: AON_CPU_NIC
[0144.062] W> Skipping boost for clk: CAN1
[0144.065] W> Skipping boost for clk: CAN2
[0144.070] I> Boot-device: eMMC
[0144.073] I> Boot-device: eMMC
[0144.076] I> bct_mb1 image downloaded
[0144.086] I> ECC region[0]: Start:0x0, End:0x0
[0144.090] I> ECC region[1]: Start:0x0, End:0x0
[0144.094] I> ECC region[2]: Start:0x0, End:0x0
[0144.098] I> ECC region[3]: Start:0x0, End:0x0
[0144.102] I> ECC region[4]: Start:0x0, End:0x0
[0144.106] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0144.112] I> Non-ECC region[1]: Start:0x0, End:0x0
[0144.117] I> Non-ECC region[2]: Start:0x0, End:0x0
[0144.121] I> Non-ECC region[3]: Start:0x0, End:0x0
[0144.125] I> Non-ECC region[4]: Start:0x0, End:0x0
[0144.132] E> FAILED: Thermal config
[0144.139] E> FAILED: MEMIO rail config
[0144.153] E> Task 50 failed (err: 0x7979061c)
[0144.158] E> Top caller module: ALIASCHECKER, error module: ALIASCHECKER, reason: 0x1c, aux_info: 0x06
[0144.166] I> MB1(1.5.1.9-t194-41334769-73a9b7ef) BIT boot status dump :
00000000000111111111100001111111111111100110001111100000000000000000000000000000000000000000000000000000
00000000000000000000000011001000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000