Xavier 4.6.3 Custom Carrier-- UART log

gistfile1.txt

[0023.980] I> ECC region[1]: Start:0x0, End:0x0
[0023.984] I> ECC region[2]: Start:0x0, End:0x0
[0023.988] I> ECC region[3]: Start:0x0, End:0x0
[0023.992] I> ECC region[4]: Start:0x0, End:0x0
[0023.996] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0024.002] I> Non-ECC region[1]: Start:0x0, End:0x0
[0024.006] I> Non-ECC region[2]: Start:0x0, End:0x0
[0024.011] I> Non-ECC region[3]: Start:0x0, End:0x0
[0024.015] I> Non-ECC region[4]: Start:0x0, End:0x0
[0024.021] E> FAILED: Thermal config
[0024.029] E> FAILED: MEMIO rail config
[0024.047] I> bct_mem image downloaded
[0025.368] I> blob image downloaded
[0025.399] I> Recovery boot mode 0
[0025.470] I> MB1 done

����main enter
SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21
HW Function test
Start Scheduler.
in late init
��
  [0025.479] I> Welcome to MB2(TBoot-BPMP) Recovery (version: 00.00.2018.32-mobile-ff5eeb60)
[0025.480] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0025.481] I> Default Heap @ [0xd486400 - 0xd48a400]
[0025.483] I> parsing oem signed section of bpmp-fw header done
[0025.490] I> bpmp-fw binary copied from blob
[0025.492] I> oem authentication of bpmp-fw header done
[0025.497] I> bpmp-fw: Authentication init Done
[0025.501] I> parsing oem signed section of cpubl header done
[0025.507] I> cpubl binary copied from blob
[0025.511] I> bpmp-fw: Authentication Finalize Done
[0025.515] I> oem authentication of cpubl header done
[0025.520] I> cpubl: Authentication init Done
[0025.524] I> parsing oem signed section of tos header done
[0025.531] I> tos binary copied from blob
[0025.534] I> Relocating BR-BCT
[0025.536] I> cpubl: Authentication Finalize Done
[0025.541] I> oem authentication of tos header done
[0025.545] I> tos: Authentication init Done
[0025.549] I> parsing oem signed section of bpmp-fw-dtb header done
[0025.555] I> bpmp-fw-dtb binary copied from blob
[0025.560] I> tos: Authentication Finalize Done
[0025.566] I> oem authentication of bpmp-fw-dtb header done
[0025.569] I> bpmp-fw-dtb: Authentication init Done
[0025.574] I> parsing oem signed section of cpubl-dtb header done
[0025.580] I> cpubl-dtb binary copied from blob
[0025.584] I> bpmp-fw-dtb: Authentication Finalize Done
[0025.589] I> found decompressor handler: lz4
[0026.127] I> oem authentication of cpubl-dtb header done
[0026.128] I> cpubl-dtb: Authentication init Done
[0026.128] I> parsing oem signed section of eks header done
[0026.129] I> eks binary copied from blob
[0026.129] I> cpubl-dtb: Authentication Finalize Done
[0026.130] I> oem authentication of eks header done
[0026.131] I> eks: Authentication init Done
[0026.134] I> eks: Authentication Finalize Done
[0026.138] I> EKB detected (length: 0x410) @ VA:0x526fb600
��NOTICE:  BL31: v1.3(release):9892ce1
NOTICE:  BL31: Built : 09:21:29, Nov 22 2022
ipc-unittest-main: 1519: Welcome to IPC unittest!!!
ipc-unittest-main: 1531: waiting forever
ipc-unittest-srv: 329: Init unittest services!!!
hwkey-agent: 41: hwkey-agent is running!!
hwkey-agent: 347: key_mgnt_processing .......
hwkey-agent: 255: Setting EKB key 0 to slot 14
hwkey-agent: 178: Init hweky-agent services!!
luks-srv: 40: luks-srv is running!!
luks-srv: 157: Init luks-srv IPC services!!
platform_bootstrap_epilog: trusty bootstrap complete
��

welcome to lk
calling constructors
initializing heap
creating bootstrap completion thread
top of bootstrap2()
initializing platform
bpmp: platform_init
tag is e73a758761f0c6d24a1e69a2ac6b5035
tag_show initialized
dt initialized
mail initialized
chipid initialized
fuse initialized
sku initialized
speedo initialized
ec_get_ec_list: found 45 ecs
ec initialized
ec_mrq initialized
vmon_populate_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
fmon_mrq initialized
reset initialized
nvhs initialized
392 clocks registered
clk_mrq_init: mrq handler registered
clk initialized
nvlink initialized
io_dpd initialized
io_dpd initialized
thermal initialized
i2c5 controller initialized
initialized i2c mrq handling
i2c initialized
regulator initialized
avfs_clk_platform initialized
soctherm initialized
aotag initialized
powergate initialized
dvs initialized
pm initialized
pg_late initialized
strap initialized
tag initialized
emc initialized
clk_dt initialized
avfs_ccplex_platform initialized
tj_max: dt node not found
tj_init initialized
/uphy is not enabled status = disabled
uphy_dt initialized
uphy initialized
safereg_init: period 80 ms
ec_late initialized
mrq initialized
��
  [0026.629] I> Welcome to TBoot-CPU Recovery
��fmon_post initialized
��[0026.629] I> Heap: [0xa4000000 ... 0xaa000000
[0026.634] I> gpio framework initialized
[0026.644] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
��clk_set_parent failed for clk i2c2, parent pll_aon (-22)
clk_set_parent failed for clk i2c8, parent pll_aon (-22)
clk_dt_late initialized
machine_check initialized
pm_post initialized
dbells initialized
avfs_clk_platform_post initialized
dmce initialized
cvc initialized
ccplex_avfs_hw_init: nafll_cluster0: not monitored
ccplex_avfs_hw_init: nafll_cluster1: not monitored
ccplex_avfs_hw_init: nafll_cluster2: not monitored
ccplex_avfs_hw_init: nafll_cluster3: not monitored
avfs_clk_mach_post initialized
regulator_post initialized
rm initialized
sc7_diag initialized
thermal_test initialized
serial_late initialized
clk_post initialized
clk_dt_post initialized
mc_reg initialized
pg_post initialized
dyn_modules initialized
sku_debugfs initialized
speedo_debugfs initialized
adc_debugfs initialized
clk_debugfs initialized
��[0026.651] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0026.728] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46
[0026.739] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0026.746] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0026.750] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0026.756] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44
��emc_debugfs initialized
��[0026.764] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539��dvs_debugfs
 initialized
fmon_debugfs initialized
vmon_debugfs initialized
pg_debugfs initialized
profile_fs initialized
debugfs_cons initialized
mail_fs initialized
profile initialized
cvc_debugfs initialized
dmce_debugfs initialized
ec_debugfs initialized
rm_debugfs initialized
soctherm_debug initialized
gr_reader initialized
mods initialized
dt_fs initialized
debugfs_mrq initialized
debug_mrq initialized
debug_safereg initialized
initializing target
calling apps_init()
starting app shell
entering main console loop
] ��
[0026.823] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0026.828] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0026.837] I> fixed regulator driver initialized
[0026.856] I> CPU: Nvidia Carmel
[0026.857] I> CPU: MIDR: 0x4e0f0040, MPIDR: 0x80000000
[0026.857] I> chip revision : A02P
[0026.857] I> Boot-device: eMMC
[0026.857] I> Boot_device: SDMMC_BOOT instance: 3
[0027.299] I> sdmmc-3 params source = boot args
[0027.300] I> sdmmc bdev is already initialized
[0027.300] I> sdmmc-3 params source = boot args
[0027.327] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0027.340] I> Found 42 partitions in SDMMC_USER (instance 3)
[0027.340] I> Recovery boot_type: 0
[0027.340] I> Entering 3p server
[0027.341] I> USB configuration success
[0027.454] I> Populate storage info
[0027.474] I> Erasing device 0: 3
[0028.590] I> Writing device 0: 3.
[0028.622] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0028.624] I> Erasing device 1: 3
[0029.361] I> Writing device 1: 3.
[0029.368] I> Writing device 1: 3.
[0029.388] I> Found 42 partitions in SDMMC_USER (instance 3)
[0029.390] I> Writing device 1: 3.
[0029.410] I> Found 42 partitions in SDMMC_USER (instance 3)
[0029.411] I> Writing mb1 partition.
[0029.448] I> Writing mb1_b partition.
[0029.482] I> Writing spe-fw partition.
[0029.508] I> Writing spe-fw_b partition.
[0029.533] I> Writing mb2 partition.
[0029.642] I> Writing mb2_b partition.
[0029.672] I> Writing mts-preboot partition.
[0029.770] I> Writing mts-preboot_b partition.
[0029.791] I> Writing SMD partition.
[0029.806] I> Writing SMD_b partition.
[0029.820] I> Writing VER_b partition.
[0029.835] I> Writing VER partition.
[0029.850] I> Writing device 1: 3.
[0029.859] I> Writing APP partition.
[0225.955] I> Writing mts-mce partition.
[0225.981] I> Writing mts-mce_b partition.
[0226.005] I> Writing mts-proper partition.
[0226.186] I> Writing mts-proper_b partition.
[0226.375] I> Writing cpu-bootloader partition.
[0226.412] I> Writing cpu-bootloader_b partition.
[0226.449] I> Writing bootloader-dtb partition.
[0226.476] I> Writing bootloader-dtb_b partition.
[0226.502] I> Writing secure-os partition.
[0226.536] I> Writing secure-os_b partition.
[0226.571] I> Writing eks partition.
[0226.592] I> Writing eks_b partition.
[0226.612] I> Writing bpmp-fw partition.
[0226.664] I> Writing bpmp-fw_b partition.
[0226.718] I> Writing bpmp-fw-dtb partition.
[0226.741] I> Writing bpmp-fw-dtb_b partition.
[0226.764] I> Writing xusb-fw partition.
[0226.776] I> Writing xusb-fw_b partition.
[0226.788] I> Writing rce-fw partition.
[0226.817] I> Writing rce-fw_b partition.
[0226.845] I> Writing adsp-fw partition.
[0226.868] I> Writing adsp-fw_b partition.
[0226.891] I> Writing sc7 partition.
[0226.913] I> Writing sc7_b partition.
[0226.935] I> Writing BMP partition.
[0226.960] I> Writing BMP_b partition.
[0226.984] I> Writing recovery partition.
[0229.327] I> Writing recovery-dtb partition.
[0229.354] I> Writing kernel-bootctrl partition.
[0229.369] I> Writing kernel-bootctrl_b partition.
[0229.383] I> Writing kernel partition.
[0231.291] I> Writing kernel_b partition.
[0233.147] I> Writing kernel-dtb partition.
[0233.174] I> Writing kernel-dtb_b partition.
[0233.209] I> Writing BCT partition.
[0233.277] I> Writing MB1_BCT partition.
[0233.306] I> Writing MB1_BCT_b partition.
[0233.338] I> Writing MEM_BCT partition.
[0233.365] I> Writing MEM_BCT_b partition.
��
[0000.053] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0000.062] I> MB1 (prd-version: 1.5.1.9-t194-41334769-73a9b7ef)
[0000.067] I> Boot-mode: Coldboot
[0000.070] I> Chip revision : A02P
[0000.073] I> Bootrom patch version : 15 (correctly patched)
[0000.078] I> ATE fuse revision : 0x200
[0000.082] I> Ram repair fuse : 0x0
[0000.085] I> Ram Code : 0x3
[0000.088] I> rst_source : 0xb
[0000.090] I> rst_level : 0x1
[0000.094] I> Boot-device: eMMC
[0000.109] I> sdmmc DDR50 mode
[0000.113] W> No valid slot number is found in scratch register
[0000.118] W> Return default slot: _a
[0000.122] I> Active Boot chain : 0
[0000.125] I> Boot-device: eMMC
[0000.128] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0000.135] I> Temperature = 32000
[0000.138] W> Skipping boost for clk: BPMP_CPU_NIC
[0000.142] W> Skipping boost for clk: BPMP_APB
[0000.146] W> Skipping boost for clk: AXI_CBB
[0000.150] W> Skipping boost for clk: AON_CPU_NIC
[0000.154] W> Skipping boost for clk: CAN1
[0000.158] W> Skipping boost for clk: CAN2
[0000.162] I> Boot-device: eMMC
[0000.165] I> Boot-device: eMMC
[0000.174] I> Sdmmc: HS400 mode enabled
[0000.179] I> ECC region[0]: Start:0x0, End:0x0
[0000.183] I> ECC region[1]: Start:0x0, End:0x0
[0000.187] I> ECC region[2]: Start:0x0, End:0x0
[0000.191] I> ECC region[3]: Start:0x0, End:0x0
[0000.195] I> ECC region[4]: Start:0x0, End:0x0
[0000.200] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0000.205] I> Non-ECC region[1]: Start:0x0, End:0x0
[0000.210] I> Non-ECC region[2]: Start:0x0, End:0x0
[0000.214] I> Non-ECC region[3]: Start:0x0, End:0x0
[0000.219] I> Non-ECC region[4]: Start:0x0, End:0x0
[0000.224] E> FAILED: Thermal config
[0000.231] E> FAILED: MEMIO rail config
[0000.250] I> Boot-device: eMMC
[0000.259] I> sdmmc bdev is already initialized
[0000.334] I> MB1 done

����main enter
SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21
HW Function test
Start Scheduler.
in late init
��
  [0000.342] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-27a92729)
[0000.343] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0000.343] I> Default Heap @ [0xd486400 - 0xd48a400]
[0000.344] I> gpio framework initialized
[0000.348] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0000.355] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0000.363] I> No valid sdcard_params in mb1_bct
[0000.367] I> Boot-device: eMMC
[0000.370] I> Boot_device: SDMMC_BOOT instance: 3
[0000.379] I> sdmmc-3 params source = boot args
[0000.380] I> sdmmc bdev is already initialized
[0000.383] I> sdmmc-3 params source = boot args
[0000.417] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0000.433] I> Found 42 partitions in SDMMC_USER (instance 3)
[0000.434] W> No valid slot number is found in scratch register
[0000.434] W> Return default slot: _a
[0000.434] I> Active Boot chain : 0
[0000.441] I> parsing oem signed section of bpmp-fw header done
[0000.448] I> bpmp-fw binary init read from storage
[0000.449] I> oem authentication of bpmp-fw header done
[0000.451] I> bpmp-fw binary done read from storage
[0000.452] I> bpmp-fw: Authentication init Done
[0000.458] I> parsing oem signed section of cpubl header done
[0000.465] I> cpubl binary init read from storage
[0000.466] I> bpmp-fw: Authentication Finalize Done
[0000.466] I> oem authentication of cpubl header done
[0000.469] I> cpubl binary done read from storage
[0000.474] I> cpubl: Authentication init Done
[0000.484] I> parsing oem signed section of rce header done
[0000.491] I> rce binary init read from storage
[0000.491] I> Relocating BR-BCT
[0000.492] I> cpubl: Authentication Finalize Done
[0000.495] I> oem authentication of rce header done
[0000.499] I> rce binary done read from storage
[0000.504] I> rce: Authentication init Done
[0000.514] I> parsing oem signed section of ape header done
[0000.520] I> ape binary init read from storage
[0000.521] I> rce: Authentication Finalize Done
[0000.522] I> oem authentication of ape header done
[0000.526] I> ape binary done read from storage
[0000.530] I> ape: Authentication init Done
[0000.541] I> parsing oem signed section of tos header done
[0000.547] I> tos binary init read from storage
[0000.548] I> ape: Authentication Finalize Done
[0000.549] I> oem authentication of tos header done
[0000.553] I> tos binary done read from storage
[0000.557] I> tos: Authentication init Done
[0000.567] I> parsing oem signed section of bpmp-fw-dtb header done
[0000.574] I> bpmp-fw-dtb binary init read from storage
[0000.574] I> tos: Authentication Finalize Done
[0000.578] I> oem authentication of bpmp-fw-dtb header done
[0000.582] I> bpmp-fw-dtb binary done read from storage
[0000.587] I> bpmp-fw-dtb: Authentication init Done
[0000.598] I> parsing oem signed section of cpubl-dtb header done
[0000.604] I> cpubl-dtb binary init read from storage
[0000.605] I> bpmp-fw-dtb: Authentication Finalize Done
[0000.607] I> found decompressor handler: lz4
[0001.067] I> oem authentication of cpubl-dtb header done
[0001.068] I> cpubl-dtb binary done read from storage
[0001.069] I> cpubl-dtb: Authentication init Done
[0001.075] I> parsing oem signed section of eks header done
[0001.082] I> eks binary init read from storage
[0001.082] I> cpubl-dtb: Authentication Finalize Done
[0001.083] I> oem authentication of eks header done
[0001.084] I> eks binary done read from storage
[0001.084] I> eks: Authentication init Done
[0001.085] I> eks: Authentication Finalize Done
[0001.088] I> EKB detected (length: 0x410) @ VA:0x52700400
��NOTICE:  BL31: v1.3(release):9892ce1
NOTICE:  BL31: Built : 09:21:29, Nov 22 2022
ipc-unittest-main: 1519: Welcome to IPC unittest!!!
ipc-unittest-main: 1531: waiting forever
ipc-unittest-srv: 329: Init unittest services!!!
hwkey-agent: 41: hwkey-agent is running!!
hwkey-agent: 347: key_mgnt_processing .......
hwkey-agent: 255: Setting EKB key 0 to slot 14
hwkey-agent: 178: Init hweky-agent services!!
luks-srv: 40: luks-srv is running!!
luks-srv: 157: Init luks-srv IPC services!!
platform_bootstrap_epilog: trusty bootstrap complete
��

welcome to lk
calling constructors
initializing heap
creating bootstrap completion thread
top of bootstrap2()
initializing platform
bpmp: platform_init
tag is e73a758761f0c6d24a1e69a2ac6b5035
tag_show initialized
dt initialized
mail initialized
chipid initialized
fuse initialized
sku initialized
speedo initialized
ec_get_ec_list: found 45 ecs
ec initialized
ec_mrq initialized
vmon_populate_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
fmon_mrq initialized
reset initialized
nvhs initialized
392 clocks registered
WARNING: pll_c4 has no dyn ramp
clk_mrq_init: mrq handler registered
clk initialized
nvlink initialized
io_dpd initialized
io_dpd initialized
thermal initialized
i2c5 controller initialized
initialized i2c mrq handling
i2c initialized
regulator initialized
avfs_clk_platform initialized
soctherm initialized
aotag initialized
powergate initialized
dvs initialized
pm initialized
pg_late initialized
strap initialized
tag initialized
emc initialized
clk_dt initialized
avfs_ccplex_platform initialized
tj_max: dt node not found
tj_init initialized
uphy_mrq_init: mrq handler registered
uphy_dt initialized
uphy initialized
safereg_init: period 80 ms
ec_late initialized
��
  [0001.585] I> Welcome to Cboot��mrq initialized
fmon_post initialized
��
[0001.586] I> Cboot Version: t194-e4df7c6b
[0001.586] I> CPU-BL Params @ 0xf2820000
[0001.586] I>  0) Base:0x00000000 Size:0x00000000
[0001.590] I>  1) Base:0xf1100000 Size:0x00100000
[0001.594] I>  2) Base:0xf2000000 Size:0x00200000
[0001.599] I>  3) Base:0xf1200000 Size:0x00200000
��clk_set_parent failed for clk i2c2, parent pll_aon (-22)
clk_set_parent failed for clk i2c8, parent pll_aon (-22)
clk_dt_late initialized
machine_check initialized
pm_post initialized
dbells initialized
avfs_clk_platform_post initialized
dmce initialized
cvc initialized
ccplex_avfs_hw_init: nafll_cluster0: not monitored
ccplex_avfs_hw_init: nafll_cluster1: not monitored
ccplex_avfs_hw_init: nafll_cluster2: not monitored
ccplex_avfs_hw_init: nafll_cluster3: not monitored
avfs_clk_mach_post initialized
regulator_post initialized
rm initialized
sc7_diag initialized
thermal_test initialized
serial_late initialized
clk_post initialized
clk_dt_post initialized
mc_reg initialized
pg_post initialized
dyn_modules initialized
sku_debugfs initialized
speedo_debugfs initialized
adc_debugfs initialized
clk_debugfs initialized
��[0001.603] I>  4) Base:0xf1000000 Size:0x00100000
[0001.683] I>  5) Base:0xf0f00000 Size:0x00100000
[0001.687] I>  6) Base:0xf3800000 Size:0x00400000
[0001.691] I>  7) Base:0xf1c00000 Size:0x00400000
[0001.696] I>  8) Base:0xf0e00000 Size:0x00100000
[0001.700] I>  9) Base:0xf0d00000 Size:0x00100000
[0001.705] I> 10) Base:0xf3000000 Size:0x00800000
[0001.709] I> 11) Base:0x40000000 Size:0x00040000
[0001.714] I> 12) Base:0xf0c00000 Size:0x00100000
[0001.718] I> 13) Base:0x40046000 Size:0x00002000
[0001.723] I> 14) Base:0x40048000 Size:0x00002000
��emc_debugfs initialized
dvs_debugfs initialized
��[0001.727] I> 15) Base:0xac000000 Size:0x00004000
[0001.736] I> 16) Base:0x4004a000 Size:0x00002000
��fmon_debugfs initialized
vmon_debugfs initialized
pg_debugfs initialized
profile_fs initialized
debugfs_cons initialized
mail_fs initialized
profile initialized
cvc_debugfs initialized
dmce_debugfs initialized
ec_debugfs initialized
rm_debugfs initialized
soctherm_debug initialized
gr_reader initialized
mods initialized
dt_fs initialized
debugfs_mrq initialized
debug_mrq initialized
debug_safereg initialized
initializing target
calling apps_init()
starting app shell
entering main console loop
] ��[0001.741] I> 17) Base:0xf0b00000 Size:0x00100000
[0001.791] I> 18) Base:0x4004c000 Size:0x00002000
[0001.796] I> 19) Base:0xf2200000 Size:0x00600000
[0001.800] I> 20) Base:0x4004e000 Size:0x00002000
[0001.805] I> 21) Base:0xf0ad0000 Size:0x0000c000
[0001.809] I> 22) Base:0x00000000 Size:0x00000000
[0001.814] I> 23) Base:0xf0ae0000 Size:0x00020000
[0001.818] I> 24) Base:0xf6000000 Size:0x02000000
[0001.823] I> 25) Base:0x40050000 Size:0x00002000
[0001.827] I> 26) Base:0x40040000 Size:0x00006000
[0001.831] I> 27) Base:0xf1800000 Size:0x00400000
[0001.836] I> 28) Base:0xf4c00000 Size:0x01400000
[0001.840] I> 29) Base:0xf1400000 Size:0x00400000
[0001.845] I> 30) Base:0x00000000 Size:0x00000000
[0001.849] I> 31) Base:0x00000000 Size:0x00000000
[0001.854] I> 32) Base:0xf8000000 Size:0x08000000
[0001.858] I> 33) Base:0x00000000 Size:0x00000000
[0001.863] I> 34) Base:0xf3c00000 Size:0x01000000
[0001.867] I> 35) Base:0xab000000 Size:0x01000000
[0001.872] I> 36) Base:0xa0000000 Size:0x0b000000
[0001.876] I> 37) Base:0xf2800000 Size:0x00800000
[0001.881] I> 38) Base:0x80000000 Size:0x20000000
[0001.885] I> 39) Base:0xb0000000 Size:0x08000000
[0001.889] I> 40) Base:0x00000000 Size:0x00000000
[0001.894] I> 41) Base:0x00000000 Size:0x00000000
[0001.898] I> 42) Base:0x00000000 Size:0x00000000
[0001.903] I> 43) Base:0x00000000 Size:0x00000000
[0001.907] I> 44) Base:0x00000000 Size:0x00000000
[0001.912] I> 45) Base:0x00000000 Size:0x00000000
[0001.916] GIC-SPI Target CPU: 0
[0001.919] Interrupts Init done
[0001.922] calling constructors
[0001.925] initializing heap
[0001.928] I> Heap: [0xa069db80 ... 0xab000000]
[0001.932] initializing threads
[0001.935] initializing timers
[0001.938] creating bootstrap completion thread
[0001.942] top of bootstrap2()
[0001.945] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000
[0001.949] initializing platform
[0001.952] W> device prod register failed
[0001.956] I> Bl_dtb @0xaaf00000
[0001.962] W> "plugin-manager" doesn't exist, creating
[0001.964] W> "ids" doesn't exist, creating
[0001.968] W> "connection" doesn't exist, creating
[0001.972] W> "configs" doesn't exist, creating
[0001.981] E> failed to read label property for node 165940: 13
[0001.984] E> failed to read reg property for node 166028: 13
[0001.989] E> failed to read label property for node 166080: 13
[0001.995] E> failed to read label property for node 166148: 13
[0002.001] E> failed to read label property for node 166184: 13
[0002.006] E> failed to read label property for node 166220: 13
[0002.012] E> failed to read reg property for node 166288: 13
[0002.017] E> failed to read label property for node 166340: 13
[0002.025] I> Find /i2c@3160000's alias i2c0
[0002.026] I> Reading eeprom i2c=0 address=0x50
[0002.055] I> Device at /i2c@3160000:0x50
[0002.056] I> Reading eeprom i2c=0 address=0x56
[0002.056] E> I2C: slave not found in slaves.
[0002.057] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true.
[0002.058] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.058] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance
 0.
[0002.065] E> eeprom: Failed to read I2C slave device
[0002.070] I> Eeprom read failed 0x3526070d
[0002.075] I> Find /i2c@3180000's alias i2c2
[0002.078] I> Reading eeprom i2c=2 address=0x54
[0002.084] E> I2C: slave not found in slaves.
[0002.087] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true.
[0002.095] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.100] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance
 2.
[0002.110] E> eeprom: Failed to read I2C slave device
[0002.114] I> Eeprom read failed 0x3526070d
[0002.118] I> Reading eeprom i2c=2 address=0x57
[0002.123] E> I2C: slave not found in slaves.
[0002.127] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0002.135] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.140] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance
 2.
[0002.150] E> eeprom: Failed to read I2C slave device
[0002.154] I> Eeprom read failed 0x3526070d
[0002.158] I> Reading eeprom i2c=2 address=0x52
[0002.163] E> I2C: slave not found in slaves.
[0002.167] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true.
[0002.175] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.180] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance
 2.
[0002.190] E> eeprom: Failed to read I2C slave device
[0002.195] I> Eeprom read failed 0x3526070d
[0002.199] I> Find /i2c@c240000's alias i2c1
[0002.203] I> Reading eeprom i2c=1 address=0x52
[0002.208] E> I2C: slave not found in slaves.
[0002.211] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true.
[0002.219] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.224] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance
 1.
[0002.234] E> eeprom: Retry to read I2C slave device.
[0002.239] E> I2C: slave not found in slaves.
[0002.243] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true.
[0002.251] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.256] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance
 1.
[0002.266] E> eeprom: Failed to read I2C slave device
[0002.270] I> Eeprom read failed 0x3526070d
[0002.274] I> Reading eeprom i2c=1 address=0x50
[0002.279] E> I2C: slave not found in slaves.
[0002.283] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[0002.291] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.296] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance
 1.
[0002.306] E> eeprom: Retry to read I2C slave device.
[0002.311] E> I2C: slave not found in slaves.
[0002.315] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[0002.323] E> I2C_DEV: Failed to send register address 0x00000000.
[0002.328] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance
 1.
[0002.338] E> eeprom: Failed to read I2C slave device
[0002.342] I> Eeprom read failed 0x3526070d
[0002.346] I> create_pm_ids: id: 2888-0004-400-L, len: 15
[0002.352] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display
-config:00,, len: 93
[0002.363] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50
[0002.370] W> "i2c@3160000" doesn't exist, creating
[0002.374] W> "module@0x50" doesn't exist, creating
[0002.380] I> Adding plugin-manager/cvm
[0002.383] W> "chip-id" doesn't exist, creating
[0002.387] I> Adding plugin-manager/chip-id/A02P
[0002.391] I> Plugin-manager override starting
[0002.396] I> node /plugin-manager/fragement-tegra-wdt-en matches
[0002.403] I> node /plugin-manager/fragement-soft-wdt matches
[0002.411] I> node /plugin-manager/fragment-pcie-c5-rp matches
[0002.415] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches
[0002.422] I> Disable plugin-manager status in FDT
[0002.423] I> Plugin-manager override finished successfully
[0002.428] I> gpio framework initialized
[0002.433] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0002.440] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0002.447] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46
[0002.454] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0002.462] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0002.469] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0002.475] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44
[0002.482] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0002.490] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0002.497] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0002.504] I> fixed regulator driver initialized
[0002.515] I> register 'maxim' power off handle
[0002.516] I> virtual i2c enabled
[0002.516] I> registered 'maxim,max20024' pmic
[0002.519] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver
[0002.525] I> Boot-device: eMMC
[0002.528] I> Boot_device: SDMMC_BOOT instance: 3
[0002.537] I> sdmmc-3 params source = boot args
[0002.537] I> create_pm_ids: id: 2888-0004-400-L, len: 15
[0002.542] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display
-config:00,, len: 93
[0002.553] I> sdmmc bdev is already initialized
[0002.557] I> sdmmc-3 params source = boot args
[0002.588] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0002.601] I> Found 42 partitions in SDMMC_USER (instance 3)
[0002.604] E> cannot find any other nvdisp nodes
[0002.604] E> no valid display unit config found in dtb
[0002.606] W> display init failed
[0002.606] I> Load in CBoot Boot Options partition and parse it
[0002.612] E> Error -9 when finding node with path /boot-configuration
[0002.613] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file.
[0002.614] I> Using default boot order
[0002.616] I> boot-dev-order :-
[0002.619] I> 1.sd
[0002.621] I> 2.usb
[0002.623] I> 3.nvme
[0002.625] I> 4.emmc
[0002.627] I> 5.net
[0002.628] I> Hit any key to stop autoboot:     4       3       2       1
[0004.636] initializing target
[0004.636] calling apps_init()
[0004.637] starting app kernel_boot_app
[0004.656] I> found decompressor handler: lz4-legacy
[0004.657] I> decompressing BMP blob ...
[0004.731] I> Kernel type = Normal
[0004.731] I> ########## SD (0) boot ##########
[0004.732] I> No sdcard
[0004.732] I> sdcard-0 params source = DT-BL
[0004.732] E> Blockdev open: exit error
[0004.732] E> SD boot failed, err: 724238353
[0004.733] I> ########## USB (0) boot ##########
[0004.738] W> No valid slot number is found in scratch register
[0004.738] W> Return default slot: _a
[0004.747] I> Validate XUSB-FW ...
[0004.747] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000
[0004.751] I> Encryption fuse is not ON
[0004.754] I> USB Firmware Version: 60.13 release
[0004.813] I> regulator of usb2-0 already enabled
[0004.819] I> regulator of usb2-1 already enabled
[0005.823] E> failed to initialize xhci controller
[0005.823] E> Error in init of XUSB host driver, err: 79790026
[0005.824] W> Failed to initialize device 5-0
[0005.824] E> USB boot failed, err: 2037973030
[0005.824] I> ########## NVME (0) boot ##########
[0005.825] I> Initializing nvme device instance 0
[0005.825] I> Initializing nvme controller
[0005.829] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000
[0005.836] I> vpcie3v3-supply not found
[0005.839] I> vpcie12v-supply not found
[0005.843] W> Failed to get nvidia,plat-gpios
[0005.847] I> tegrabl_pcie_soc_preinit: (0):
[0005.851] I> Unpowergate
[0005.853] I> tegrabl_car_clk_disable(0) ...
[0005.857] I> tegrabl_car_rst_set(CORE, 0) ...
[0005.862] I> tegrabl_car_rst_set(APB, 0) ...
[0005.866] I> tegrabl_car_clk_enable(0) ...
[0005.870] I> tegrabl_car_rst_clear(APB, 0) ...
[0005.874] I> tegrabl_set_ctrl_state(0)
[0005.877] I> CLR PCIE_APB:6
[0005.880] I> tegrabl_pcie_soc_init: (0):
[0005.884] I> APPL initialization ...
[0005.887] I> poweron phys
[0005.890] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000
[0005.896] I> tegrabl_power_on_phy: controller 0 not available
[0005.902] E> Failed to power on phy on controller-0
[0005.906] I> PCIe (0) Link is not UP
[0005.910] W> Failed tegrabl_pcie_soc_init(), error=0x1
[0005.915] I> Failed to initialize SoC Host PCIe controller
[0005.920] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x1
[0005.926] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601
[0005.933] W> Failed to open NVME-0, err = 80800601
[0005.938] W> Failed to initialize device 10-0
[0005.942] E> NVME (0) boot failed, err: 0x80800601
[0005.946] I> ########## NVME (1) boot ##########
[0005.951] I> Initializing nvme device instance 1
[0005.955] I> Initializing nvme controller
[0005.959] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000
[0005.966] I> vpcie3v3-supply not found
[0005.969] I> vpcie12v-supply not found
[0005.973] W> Failed to get nvidia,plat-gpios
[0005.977] I> tegrabl_pcie_soc_preinit: (1):
[0005.981] I> Unpowergate
[0005.983] I> tegrabl_car_clk_disable(1) ...
[0005.987] I> tegrabl_car_rst_set(CORE, 1) ...
[0005.992] I> tegrabl_car_rst_set(APB, 1) ...
[0005.996] I> tegrabl_car_clk_enable(1) ...
[0006.000] I> tegrabl_car_rst_clear(APB, 1) ...
[0006.004] I> tegrabl_set_ctrl_state(1)
[0006.007] I> CLR PCIE_APB:6
[0006.010] I> tegrabl_pcie_soc_init: (1):
[0006.014] I> APPL initialization ...
[0006.017] I> poweron phys
[0006.020] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000
[0006.026] I> tegrabl_power_on_phy: controller 1 not available
[0006.032] E> Failed to power on phy on controller-1
[0006.036] I> PCIe (1) Link is not UP
[0006.040] W> Failed tegrabl_pcie_soc_init(), error=0x1
[0006.045] I> Failed to initialize SoC Host PCIe controller
[0006.050] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(1); error=0x1
[0006.057] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601
[0006.063] W> Failed to open NVME-1, err = 80800601
[0006.068] W> Failed to initialize device 10-1
[0006.072] E> NVME (1) boot failed, err: 0x80800601
[0006.076] I> ########## NVME (2) boot ##########
[0006.081] I> Initializing nvme device instance 2
[0006.085] I> Initializing nvme controller
[0006.090] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000
[0006.096] I> vpcie3v3-supply not found
[0006.099] I> vpcie12v-supply not found
[0006.103] W> Failed to get nvidia,plat-gpios
[0006.107] I> tegrabl_pcie_soc_preinit: (2):
[0006.111] I> Unpowergate
[0006.113] I> tegrabl_car_clk_disable(2) ...
[0006.117] I> tegrabl_car_rst_set(CORE, 2) ...
[0006.122] I> tegrabl_car_rst_set(APB, 2) ...
[0006.126] I> tegrabl_car_clk_enable(2) ...
[0006.130] I> tegrabl_car_rst_clear(APB, 2) ...
[0006.134] I> tegrabl_set_ctrl_state(2)
[0006.138] I> CLR PCIE_APB:6
[0006.140] I> tegrabl_pcie_soc_init: (2):
[0006.144] I> APPL initialization ...
[0006.147] I> poweron phys
[0006.150] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000
[0006.156] I> tegrabl_power_on_phy: controller 2 not available
[0006.162] E> Failed to power on phy on controller-2
[0006.166] I> PCIe (2) Link is not UP
[0006.170] W> Failed tegrabl_pcie_soc_init(), error=0x1
[0006.175] I> Failed to initialize SoC Host PCIe controller
[0006.180] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1
[0006.187] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601
[0006.193] W> Failed to open NVME-2, err = 80800601
[0006.198] W> Failed to initialize device 10-2
[0006.202] E> NVME (2) boot failed, err: 0x80800601
[0006.206] I> ########## NVME (3) boot ##########
[0006.211] I> Initializing nvme device instance 3
[0006.215] I> Initializing nvme controller
[0006.220] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000
[0006.226] I> vpcie3v3-supply not found
[0006.229] I> vpcie12v-supply not found
[0006.233] W> Failed to get nvidia,plat-gpios
[0006.237] I> tegrabl_pcie_soc_preinit: (3):
[0006.241] I> Unpowergate
[0006.243] I> tegrabl_car_clk_disable(3) ...
[0006.247] I> tegrabl_car_rst_set(CORE, 3) ...
[0006.252] I> tegrabl_car_rst_set(APB, 3) ...
[0006.256] I> tegrabl_car_clk_enable(3) ...
[0006.260] I> tegrabl_car_rst_clear(APB, 3) ...
[0006.264] I> tegrabl_set_ctrl_state(3)
[0006.268] I> CLR PCIE_APB:6
[0006.270] I> tegrabl_pcie_soc_init: (3):
[0006.274] I> APPL initialization ...
[0006.277] I> poweron phys
[0006.280] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000
[0006.286] I> tegrabl_power_on_phy: controller 3 not available
[0006.292] E> Failed to power on phy on controller-3
[0006.296] I> PCIe (3) Link is not UP
[0006.300] W> Failed tegrabl_pcie_soc_init(), error=0x1
[0006.305] I> Failed to initialize SoC Host PCIe controller
[0006.310] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x1
[0006.317] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601
[0006.323] W> Failed to open NVME-3, err = 80800601
[0006.328] W> Failed to initialize device 10-3
[0006.332] E> NVME (3) boot failed, err: 0x80800601
[0006.337] I> ########## NVME (4) boot ##########
[0006.341] I> Initializing nvme device instance 4
[0006.345] I> Initializing nvme controller
[0006.350] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000
[0006.356] I> vpcie3v3-supply not found
[0006.359] I> vpcie12v-supply not found
[0006.363] W> Failed to get nvidia,plat-gpios
[0006.367] I> tegrabl_pcie_soc_preinit: (4):
[0006.371] I> Unpowergate
[0006.374] I> tegrabl_car_clk_disable(4) ...
[0006.377] I> tegrabl_car_rst_set(CORE, 4) ...
[0006.382] I> tegrabl_car_rst_set(APB, 4) ...
[0006.386] I> tegrabl_car_clk_enable(4) ...
[0006.390] I> tegrabl_car_rst_clear(APB, 4) ...
[0006.394] I> tegrabl_set_ctrl_state(4)
[0006.398] I> CLR PCIE_APB:6
[0006.400] I> tegrabl_pcie_soc_init: (4):
[0006.404] I> APPL initialization ...
[0006.407] I> poweron phys
[0006.410] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000
[0006.416] I> tegrabl_power_on_phy: controller 4 not available
[0006.422] E> Failed to power on phy on controller-4
[0006.426] I> PCIe (4) Link is not UP
[0006.430] W> Failed tegrabl_pcie_soc_init(), error=0x1
[0006.435] I> Failed to initialize SoC Host PCIe controller
[0006.440] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1
[0006.447] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601
[0006.453] W> Failed to open NVME-4, err = 80800601
[0006.458] W> Failed to initialize device 10-4
[0006.462] E> NVME (4) boot failed, err: 0x80800601
[0006.467] I> ########## NVME (5) boot ##########
[0006.471] I> Initializing nvme device instance 5
[0006.475] I> Initializing nvme controller
[0006.480] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000
[0006.486] I> i=0, reg_phandle=0x1b
[0006.491] I> reg_voltage=5000000
[0006.492] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 5000000)
[0006.503] I> enabling 'vdd-5v-usb3' regulator
[0006.507] I> i=1, reg_phandle=0x1c
[0006.509] I> reg_voltage=1200000
[0006.510] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000)
[0006.521] I> enabling 'vdd-12v-pcie' regulator
[0006.521] I> tegrabl_pcie_soc_preinit: (5):
[0006.526] I> Unpowergate
[0006.528] I> tegrabl_car_clk_disable(5) ...
[0006.532] I> tegrabl_car_rst_set(CORE, 5) ...
[0006.536] I> tegrabl_car_rst_set(APB, 5) ...
[0006.540] I> tegrabl_car_clk_enable(5) ...
[0006.544] I> tegrabl_car_rst_clear(APB, 5) ...
[0006.549] I> tegrabl_set_ctrl_state(5)
[0006.552] I> CLR PCIE_APB:6
[0006.555] I> tegrabl_pcie_soc_init: (5):
[0006.558] I> APPL initialization ...
[0006.562] I> poweron phys
[0006.565] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000
[0006.571] I> tegrabl_power_on_phy: power on phy @0x3eb0000
[0006.576] I> tegrabl_power_on_phy: power on phy @0x3ec0000
[0006.581] I> tegrabl_power_on_phy: power on phy @0x3ed0000
[0006.587] I> tegrabl_power_on_phy: power on phy @0x3ee0000
[0006.592] I> tegrabl_power_on_phy: power on phy @0x3ef0000
[0006.598] I> tegrabl_power_on_phy: power on phy @0x3f00000
[0006.603] I> tegrabl_power_on_phy: power on phy @0x3f10000
[0006.608] I> tegrabl_power_on_phy: power on phy @0x3f20000
[0007.713] C> Failed to link up controller-5
[0007.714] I> PCIe (5) Link is not UP
[0007.714] I> tegrabl_pcie_disable_regulators: disable regulator 0x1b
[0007.716] I> disabling 'vdd-5v-usb3' regulator
[0007.717] I> tegrabl_pcie_disable_regulators: disable regulator 0x1c
[0007.719] I> disabling 'vdd-12v-pcie' regulator
[0007.719] W> Failed tegrabl_pcie_soc_init(), error=0x12
[0007.722] I> Failed to initialize SoC Host PCIe controller
[0007.727] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12
[0007.734] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612
[0007.740] W> Failed to open NVME-5, err = 80800612
[0007.745] W> Failed to initialize device 10-5
[0007.749] E> NVME (5) boot failed, err: 0x80800612
[0007.754] I> ########## Fixed storage boot ##########
[0007.759] I> Loading kernel-bootctrl from partition
[0007.763] I> Loading partition kernel-bootctrl at 0xa42e0000 from device(0x1)
[0007.777] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid
[0007.777] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0007.791] I> Already published: 00010003
[0007.791] I> Look for boot partition
[0007.792] I> Fallback: assuming 0th partition is boot partition
[0007.797] I> Detect filesystem
[0007.825] I> Loading extlinux.conf ...
[0007.825] I> Loading extlinux.conf binary from rootfs ...
[0007.825] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf
[0007.868] I> Loading extlinux.conf sig file from rootfs ...
[0007.868] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig
[0007.899] I> Validate extlinux.conf ...
[0007.900] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000
[0007.900] I> Encryption fuse is not ON
[0007.901] I> L4T boot options
[0007.901] I> [1]: "primary kernel"
[0007.901] I> Enter choice:
[0010.902] I> Continuing with default option: 1
[0010.902] I> Loading kernel ...
[0010.902] I> Loading kernel binary from rootfs ...
[0010.903] I> rootfs path: /sdmmc_user/boot/Image
[0011.122] I> Loading kernel sig file from rootfs ...
[0011.122] I> rootfs path: /sdmmc_user/boot/Image.sig
[0011.141] I> overload load_size to 34267144 (from 34267152)
[0011.141] I> Validate kernel ...
[0011.141] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000
[0011.453] I> Encryption fuse is not ON
[0011.487] I> Loading kernel-dtb ...
[0011.487] I> No kernel-dtb binary path
[0011.488] I> Continue to load from partition ...
[0011.488] W> No valid slot number is found in scratch register
[0011.488] W> Return default slot: _a
[0011.489] I> A/B: bin_type (38) slot 0
[0011.489] I> Loading kernel-dtb from partition
[0011.490] I> Loading partition kernel-dtb at 0x91000000 from device(0x1)
[0011.506] I> Validate kernel-dtb ...
[0011.506] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000
[0011.509] I> Encryption fuse is not ON
[0011.512] I> Loading ramdisk from rootfs ...
[0011.515] I> Loading ramdisk binary from rootfs ...
[0011.520] I> rootfs path: /sdmmc_user/boot/initrd
[0011.588] I> Loading ramdisk sig file from rootfs ...
[0011.589] I> rootfs path: /sdmmc_user/boot/initrd.sig
[0011.607] I> overload load_size to 7238963 (from 7238976)
[0011.608] I> Validate ramdisk ...
[0011.608] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000
[0011.674] I> Encryption fuse is not ON
[0011.694] I> Kernel hdr @0xa42e0000
[0011.694] I> Kernel dtb @0x90000000
[0011.695] I> decompressor handler not found
[0011.695] I> Copying kernel image (34267144 bytes) from 0xa42e0000 to 0x80080000 ... [0011.706] I> Done
[0011.707] I> Updated bpmp info to DTB
[0011.708] I> Ramdisk: Base: 0x92000000; Size: 0x6e7533
[0011.709] I> Updated initrd info to DTB
[0011.709] W> WARN: Fail to override "console=none" in commandline
[0011.709] I> Active rootfs suffix:
[0011.710] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0011.718] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0011.725] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0011.732] W> No valid slot number is found in scratch register
[0011.738] W> Return default slot: _a
[0011.741] I> Active slot suffix:
[0011.744] I> add_boot_slot_suffix: slot_suffix =
[0011.749] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c16
8000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= b
oot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1
[0011.773] I> Updated bootarg info to DTB
[0011.777] W> MAC addr invalid!
[0011.780] E> Failed to get WIFI MAC address
[0011.784] W> MAC addr invalid!
[0011.787] E> Failed to get Bluetooth MAC address
[0011.791] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3a:6c:39
[0011.798] W> "plugin-manager" doesn't exist, creating
[0011.803] I> Adding /chosen/plugin-manager/cvm
[0011.807] W> "chip-id" doesn't exist, creating
[0011.811] I> Adding /chosen/plugin-manager/chip-id
[0011.816] W> "configs" doesn't exist, creating
[0011.820] I> Adding /chosen/plugin-manager/configs
[0011.824] W> "ids" doesn't exist, creating
[0011.828] I> Adding /chosen/plugin-manager/ids
[0011.833] W> "odm-data" doesn't exist, creating
[0011.837] I> Adding /chosen/plugin-manager/odm-data
[0011.844] W> "memory" doesn't exist, creating
[0011.846] I> [0] START: 0x80000000, END: 0xac000000
[0011.851] I> [1] START: 0xac004000, END: 0xf0ad0000
[0011.855] I> [2] START: 0xf0adc000, END: 0xf0ae0000
[0011.860] I> dram_block larger than 80000000
[0011.864] I> [3] START: 0x100000000, END: 0x880000000
[0011.869] I> added [base:0x80000000, size:0x2c000000] to /memory
[0011.875] I> added [base:0xac200000, size:0x44800000] to /memory
[0011.881] I> added [base:0x100000000, size:0x780000000] to /memory
[0011.888] I> Updated memory info to DTB
[0011.891] W> add_disp_param: failed to get display params for du=0
[0011.897] W> "reset" doesn't exist, creating
[0011.901] I> Adding ecid(00000001647d1503000000000bfe0100) to DT
[0011.907] I> NVG: Logical CPU: 0; MPIDR: 0x80000000
[0011.911] I> NVG: Logical CPU: 1; MPIDR: 0x80000001
[0011.916] I> NVG: Logical CPU: 2; MPIDR: 0x80000100
[0011.921] I> NVG: Logical CPU: 3; MPIDR: 0x80000101
[0011.926] I> NVG: Logical CPU: 4; MPIDR: 0x80000200
[0011.930] I> NVG: Logical CPU: 5; MPIDR: 0x80000201
[0011.935] I> NVG: Logical CPU: 6; MPIDR: 0x80000300
[0011.940] I> NVG: Logical CPU: 7; MPIDR: 0x80000301
[0011.945] W> "misc-data" doesn't exist, creating
[0011.949] I> Boot-device: eMMC
[0011.952] I> Add boot-sdmmc to plugin-manager/misc-data
[0011.957] I> Add storage-sdmmc to plugin-manager/misc-data
[0011.962] W> Unknown storage device
[0011.966] I> Add serial number:1560121408641 as DT property
[0011.972] I> Plugin-manager override starting
[0011.976] I> node /plugin-manager/fragement-tegra-wdt-en matches
[0011.982] I> node /plugin-manager/fragement-soft-wdt matches
[0011.989] I> node /plugin-manager/fragment-pcie-c5-rp matches
[0011.994] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches
[0012.002] I> Disable plugin-manager status in FDT
[0012.003] I> Plugin-manager override finished successfully
[0012.008] I> tegrabl_load_kernel_and_dtb: Done
[0012.013] W> tegrabl_display_clear: display is not initialized
[0012.018] W> Boot logo display failed...
[0012.022] I> Kernel EP: 0x80080000, DTB: 0x90000000
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.299-tegra (callendorph@jetson-programmer) (gcc version 7.3.1 20180425 [
linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP
PREEMPT Mon Dec 5 09:56:28 PST 2022
[    0.000000] Boot CPU: AArch64 Processor [4e0f0040]
[    0.000000] OF: fdt:memory scan node memory, reg size 48,
[    0.000000] OF: fdt: - 80000000 ,  2c000000
[    0.000000] OF: fdt: - ac200000 ,  44800000
[    0.000000] OF: fdt: - 100000000 ,  780000000
[    0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '')
[    0.000000] bootconsole [tegra_comb_uart0] enabled
[    2.196576] rt5659 7-001a: Device with ID register ffffff80 is not rt5659
[    3.285639] cgroup: cgroup2: unknown option "nsdelegate"
[    4.106872] nvgpu: disagrees about version of symbol module_layout
[    4.141749] userspace_alert: disagrees about version of symbol module_layout
[    4.168247] userspace_alert: disagrees about version of symbol module_layout
[    4.179097] userspace_alert: disagrees about version of symbol module_layout
[    4.245095] tegra_udrm: disagrees about version of symbol module_layout
[    4.455908] random: crng init done
[    4.456011] random: 7 urandom warning(s) missed due to ratelimiting
[    5.248514] using random self ethernet address
[    5.248636] using random host ethernet address
[   10.247184] systemd-fstab-generator[4559]: x-systemd.device-timeout ignored for aft-master:/opt/harv
[   10.557369] systemd-fstab-generator[4588]: x-systemd.device-timeout ignored for aft-master:/opt/harv
[   11.951775] zram: disagrees about version of symbol module_layout

Ubuntu 18.04.6 LTS aft-stereo ttyTCU0

aft-stereo login: