hid-prox-weigand.ino

/*
 * HID RFID Reader Wiegand Interface for Arduino Uno
 * Originally by  Daniel Smith, 2012.01.30 -- http://www.pagemac.com/projects/rfid/arduino_wiegand
 * 
 * Updated 2016-11-23 by Jon "ShakataGaNai" Davis.
 * See https://obviate.io/?p=7470 for more details & instructions
*/
 
 
#define MAX_BITS 100                 // max number of bits 
#define WEIGAND_WAIT_TIME  3000      // time to wait for another weigand pulse.  
 
unsigned char databits[MAX_BITS];    // stores all of the data bits
unsigned char bitCount;              // number of bits currently captured
unsigned char flagDone;              // goes low when data is currently being captured
unsigned int weigand_counter;        // countdown until we assume there are no more bits
 
unsigned long facilityCode=0;        // decoded facility code
unsigned long cardCode=0;            // decoded card code

int LED_GREEN = 11;
int LED_RED = 12;
int BEEP_BEEP = 10;

// interrupt that happens when INTO goes low (0 bit)
void ISR_INT0() {
  //Serial.print("0");   // uncomment this line to display raw binary
  bitCount++;
  flagDone = 0;
  weigand_counter = WEIGAND_WAIT_TIME;  
 
}
 
// interrupt that happens when INT1 goes low (1 bit)
void ISR_INT1() {
  //Serial.print("1");   // uncomment this line to display raw binary
  databits[bitCount] = 1;
  bitCount++;
  flagDone = 0;
  weigand_counter = WEIGAND_WAIT_TIME;  
}
 
void setup() {
  pinMode(LED_RED, OUTPUT);  
  pinMode(LED_GREEN, OUTPUT);  
  pinMode(BEEP_BEEP, OUTPUT);  
  digitalWrite(LED_RED, HIGH); // High = Off
  digitalWrite(BEEP_BEEP, HIGH); // High = off
  digitalWrite(LED_GREEN, LOW);  // Low = On
  pinMode(2, INPUT);     // DATA0 (INT0)
  pinMode(3, INPUT);     // DATA1 (INT1)
 
  Serial.begin(9600);
  Serial.println("RFID Readers");
 
  // binds the ISR functions to the falling edge of INTO and INT1
  attachInterrupt(0, ISR_INT0, FALLING);  
  attachInterrupt(1, ISR_INT1, FALLING);
 
 
  weigand_counter = WEIGAND_WAIT_TIME;
}
 
void loop()
{
  // This waits to make sure that there have been no more data pulses before processing data
  if (!flagDone) {
    if (--weigand_counter == 0)
      flagDone = 1;  
  }
 
  // if we have bits and we the weigand counter went out
  if (bitCount > 0 && flagDone) {
    unsigned char i;
 
    Serial.print("Read ");
    Serial.print(bitCount);
    Serial.print(" bits. ");
 
    if (bitCount == 35) {
      // 35 bit HID Corporate 1000 format
      // facility code = bits 2 to 14
      for (i=2; i<14; i++) {
         facilityCode <<=1;
         facilityCode |= databits[i];
      }
 
      // card code = bits 15 to 34
      for (i=14; i<34; i++) {
         cardCode <<=1;
         cardCode |= databits[i];
      }
 
      printBits();
    }
    else if (bitCount == 26) {
      // standard 26 bit format
      // facility code = bits 2 to 9
      for (i=1; i<9; i++) {
         facilityCode <<=1;
         facilityCode |= databits[i];
      }
 
      // card code = bits 10 to 23
      for (i=9; i<25; i++) {
         cardCode <<=1;
         cardCode |= databits[i];
      }
 
      printBits();  
    } else if ( bitCount == 37 ) { // Wiegand 37bit
        // https://www.ooaccess.com/kb/37-bit-fc/
        // facility code = bits 1 to 16
        for(i = 1; i < 17; ++i ) {
            facilityCode <<=1;
            facilityCode |= databits[i];
        }
        // card code = bits 17 to 35
        for (i = 17; i < 36; ++i) {
            cardCode <<=1;
            cardCode |= databits[i];
        }
        printBits();  
    } else {
     // you can add other formats if you want!
     // Serial.println("Unable to decode."); 
    }
 
     // cleanup and get ready for the next card
     bitCount = 0;
     facilityCode = 0;
     cardCode = 0;
     for (i=0; i<MAX_BITS; i++) 
     {
       databits[i] = 0;
     }
  }
}
 
void printBits() {
      Serial.print("FC = ");
      Serial.print(facilityCode);
      Serial.print(", CC = ");
      Serial.println(cardCode);

      // Now lets play with some LED's for fun:
      digitalWrite(LED_RED, LOW); // Red
      if(cardCode == 12345){
        // If this one "bad" card, turn off green
        // so it's just red. Otherwise you get orange-ish
        digitalWrite(LED_GREEN, HIGH); 
      }
      delay(500);
      digitalWrite(LED_RED, HIGH);  // Red Off
      digitalWrite(LED_GREEN, LOW);  // Green back on
 
      // Lets be annoying and beep more
      digitalWrite(BEEP_BEEP, LOW);
      delay(500);
      digitalWrite(BEEP_BEEP, HIGH);
      delay(500);
      digitalWrite(BEEP_BEEP, LOW);
      delay(500);
      digitalWrite(BEEP_BEEP, HIGH);
}

Added support for the Wiegand 37 bit card format