Last active
March 26, 2017 14:00
-
-
Save carlosdelfino/d117e85caa3fba2069e54de2ca9ce369 to your computer and use it in GitHub Desktop.
Mensagens do servidor de dados e aplicações 32bits
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 727.031759] usb 1-1: USB disconnect, device number 2 | |
[ 729.732216] usb 1-1: new high-speed USB device number 5 using ehci-pci | |
[ 729.865242] usb 1-1: New USB device found, idVendor=1058, idProduct=0740 | |
[ 729.865256] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 | |
[ 729.865265] usb 1-1: Product: My Passport 0740 | |
[ 729.865272] usb 1-1: Manufacturer: Western Digital | |
[ 729.865279] usb 1-1: SerialNumber: 575835314139313237393632 | |
[ 729.866315] usb-storage 1-1:1.0: USB Mass Storage device detected | |
[ 729.867408] scsi host3: usb-storage 1-1:1.0 | |
[ 730.865067] scsi 3:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 | |
[ 730.865794] scsi 3:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 | |
[ 730.869999] sd 3:0:0:0: Attached scsi generic sg2 type 0 | |
[ 730.870375] scsi 3:0:0:1: Attached scsi generic sg3 type 13 | |
[ 730.873892] sd 3:0:0:0: [sdb] Spinning up disk... | |
[ 739.900143] . | |
[ 742.339903] usb 1-1: USB disconnect, device number 5 | |
[ 742.348111] ready | |
[ 742.348181] scsi 3:0:0:1: Wrong diagnostic page; asked for 1 got 0 | |
[ 742.348227] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK | |
[ 742.348231] sd 3:0:0:0: [sdb] Sense not available. | |
[ 742.348262] sd 3:0:0:0: [sdb] Write Protect is off | |
[ 742.348268] sd 3:0:0:0: [sdb] Mode Sense: 2e 2e 2f 2e | |
[ 742.348298] sd 3:0:0:0: [sdb] No Caching mode page found | |
[ 742.348304] sd 3:0:0:0: [sdb] Assuming drive cache: write through | |
[ 742.348485] scsi 3:0:0:1: Failed to get diagnostic page 0xffffffea | |
[ 742.348587] scsi 3:0:0:1: Failed to bind enclosure -19 | |
[ 742.349099] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK | |
[ 742.349107] sd 3:0:0:0: [sdb] Sense not available. | |
[ 742.349152] ses 3:0:0:1: Attached Enclosure device | |
[ 742.349164] sd 3:0:0:0: [sdb] Attached SCSI disk | |
[ 752.264123] usb 1-1: new high-speed USB device number 6 using ehci-pci | |
[ 752.397203] usb 1-1: New USB device found, idVendor=1058, idProduct=0740 | |
[ 752.397216] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 | |
[ 752.397224] usb 1-1: Product: My Passport 0740 | |
[ 752.397231] usb 1-1: Manufacturer: Western Digital | |
[ 752.397238] usb 1-1: SerialNumber: 575835314139313237393632 | |
[ 752.398162] usb-storage 1-1:1.0: USB Mass Storage device detected | |
[ 752.400637] scsi host4: usb-storage 1-1:1.0 | |
[ 753.401285] scsi 4:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 | |
[ 753.401987] scsi 4:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 | |
[ 753.406679] sd 4:0:0:0: Attached scsi generic sg2 type 0 | |
[ 753.407036] ses 4:0:0:1: Attached Enclosure device | |
[ 753.407274] ses 4:0:0:1: Attached scsi generic sg3 type 13 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 365.861911] sd 2:0:0:0: timing out command, waited 180s | |
[ 424.494967] usb 1-1: USB disconnect, device number 2 | |
[ 424.496150] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK | |
[ 424.496162] sd 2:0:0:0: [sdb] Sense not available. | |
[ 424.496225] sd 2:0:0:0: [sdb] Write Protect is off | |
[ 424.496236] sd 2:0:0:0: [sdb] Mode Sense: 00 06 04 7e | |
[ 424.496277] sd 2:0:0:0: [sdb] Asking for cache data failed | |
[ 424.496414] sd 2:0:0:0: [sdb] Assuming drive cache: write through | |
[ 424.497192] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK | |
[ 424.497214] sd 2:0:0:0: [sdb] Sense not available. | |
[ 424.497290] sd 2:0:0:0: [sdb] Attached SCSI disk | |
[ 424.625052] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 | |
[ 424.625064] yenta_cardbus 0000:06:04.0: Socket status: 30000006 | |
[ 424.625072] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a | |
[ 424.625087] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff] | |
[ 424.625094] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: | |
[ 424.626639] excluding 0x7000-0x70ff 0x7400-0x74ff | |
[ 424.632454] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd00fffff] | |
[ 424.632462] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd00fffff: | |
[ 424.632470] excluding 0xd0000000-0xd000ffff | |
[ 427.872192] usb 1-1: new high-speed USB device number 5 using ehci-pci | |
[ 428.005338] usb 1-1: New USB device found, idVendor=1058, idProduct=0740 | |
[ 428.005351] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 | |
[ 428.005359] usb 1-1: Product: My Passport 0740 | |
[ 428.005367] usb 1-1: Manufacturer: Western Digital | |
[ 428.005374] usb 1-1: SerialNumber: 575835314139313237393632 | |
[ 428.006264] usb-storage 1-1:1.0: USB Mass Storage device detected | |
[ 428.007857] scsi host3: usb-storage 1-1:1.0 | |
[ 429.009335] scsi 3:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 | |
[ 429.009920] scsi 3:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 | |
[ 429.015581] sd 3:0:0:0: Attached scsi generic sg2 type 0 | |
[ 429.015994] ses 3:0:0:1: Attached Enclosure device | |
[ 429.016332] ses 3:0:0:1: Attached scsi generic sg3 type 13 | |
[ 429.009335] scsi 3:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 | |
[ 429.009920] scsi 3:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 | |
[ 429.015581] sd 3:0:0:0: Attached scsi generic sg2 type 0 | |
[ 429.015994] ses 3:0:0:1: Attached Enclosure device | |
[ 429.016332] ses 3:0:0:1: Attached scsi generic sg3 type 13 | |
[ 437.034479] ses 3:0:0:1: Wrong diagnostic page; asked for 1 got 0 | |
[ 437.034631] ses 3:0:0:1: Failed to get diagnostic page 0xffffffea | |
[ 437.034791] ses 3:0:0:1: Failed to bind enclosure -19 | |
[ 437.036935] sd 3:0:0:0: [sdb] Spinning up disk... | |
[ 446.120119] ....................................................................................................not responding... |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 590.229328] usb 1-1: USB disconnect, device number 5 | |
[ 590.232233] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK | |
[ 590.232258] sd 3:0:0:0: [sdb] Sense not available. | |
[ 590.232292] sd 3:0:0:0: [sdb] Write Protect is off | |
[ 590.232300] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 | |
[ 590.232330] sd 3:0:0:0: [sdb] Asking for cache data failed | |
[ 590.232436] sd 3:0:0:0: [sdb] Assuming drive cache: write through | |
[ 590.233045] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK | |
[ 590.233053] sd 3:0:0:0: [sdb] Sense not available. | |
[ 590.233107] sd 3:0:0:0: [sdb] Attached SCSI disk | |
[ 593.380161] usb 1-1: new high-speed USB device number 6 using ehci-pci | |
[ 593.513283] usb 1-1: New USB device found, idVendor=1058, idProduct=0740 | |
[ 593.513293] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 | |
[ 593.513299] usb 1-1: Product: My Passport 0740 | |
[ 593.513305] usb 1-1: Manufacturer: Western Digital | |
[ 593.513310] usb 1-1: SerialNumber: 575835314139313237393632 | |
[ 593.514197] usb-storage 1-1:1.0: USB Mass Storage device detected | |
[ 593.515054] scsi host4: usb-storage 1-1:1.0 | |
[ 594.513206] scsi 4:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 | |
[ 594.513828] scsi 4:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 | |
[ 594.522053] sd 4:0:0:0: Attached scsi generic sg2 type 0 | |
[ 594.522512] ses 4:0:0:1: Attached Enclosure device | |
[ 594.524160] ses 4:0:0:1: Attached scsi generic sg3 type 13 | |
[ 594.524767] sd 4:0:0:0: [sdb] Spinning up disk... | |
[ 602.816138] .ready | |
[ 602.816944] sd 4:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) | |
[ 602.818034] sd 4:0:0:0: [sdb] Write Protect is off | |
[ 602.818045] sd 4:0:0:0: [sdb] Mode Sense: 47 00 10 08 | |
[ 602.819026] sd 4:0:0:0: [sdb] No Caching mode page found | |
[ 602.819165] sd 4:0:0:0: [sdb] Assuming drive cache: write through | |
[ 602.828424] sdb: sdb1 | |
[ 602.831650] sd 4:0:0:0: [sdb] Attached SCSI disk |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment